aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2015-09-14 20:09:31 +0000
committerJohn Crispin <john@openwrt.org>2015-09-14 20:09:31 +0000
commit57c5910535ebf5fbee20213ddaf67da118629cb9 (patch)
treea3f2bcdcc558e396658a7546e0679b6d78437002 /target/linux
parent2c1d56af50ab19c545218b1e66a5e3100f7da166 (diff)
downloadupstream-57c5910535ebf5fbee20213ddaf67da118629cb9.tar.gz
upstream-57c5910535ebf5fbee20213ddaf67da118629cb9.tar.bz2
upstream-57c5910535ebf5fbee20213ddaf67da118629cb9.zip
ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350
This patch is to add the WIZnet WizFi630A board as a new platform. The board is in mini pci express form factor. Signed-off-by: Tobias Welz <tw@wiznet.eu> SVN-Revision: 46921
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network10
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/WIZFI630A.dts180
-rw-r--r--target/linux/ramips/image/Makefile4
-rw-r--r--target/linux/ramips/rt305x/profiles/wiznet.mk17
7 files changed, 217 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 02cd6824d0..75cccae0fb 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -218,6 +218,12 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
ucidef_add_switch_vlan "switch0" "2" "5 6t"
;;
+ wizfi630a)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "1 2 6t"
+ ucidef_add_switch_vlan "switch0" "2" "0 6t"
+ ;;
y1s)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
@@ -328,6 +334,10 @@ ramips_setup_macs()
wan_mac=$(mtd_get_mac_binary factory 4)
lan_mac=$wan_mac
;;
+ wizfi630a)
+ lan_mac=$(mtd_get_mac_binary factory 4)
+ wan_mac=$(mtd_get_mac_binary factory 40)
+ ;;
wsr-1166)
local index="$(find_mtd_index "board_data")"
wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index f886b5da8a..7fc6f29727 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -166,6 +166,9 @@ get_status_led() {
wzr-agl300nh)
status_led="$board:green:router"
;;
+ wizfi630a)
+ status_led="$board::run"
+ ;;
wsr-1166|\
wsr-600)
status_led="$board:orange:diag"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 5b6808e0b3..d242235564 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -370,6 +370,9 @@ ramips_board_detect() {
*"WIZARD 8800")
name="wizard8800"
;;
+ *"WizFi630A")
+ name="wizfi630a"
+ ;;
*"WL-330N")
name="wl-330n"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 844ed5db95..2f6c6246ab 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -108,6 +108,7 @@ platform_check_image() {
whr-300hp2|\
whr-600d|\
whr-g300n|\
+ wizfi630a|\
wl-330n|\
wl-330n3g|\
wl-341v3|\
diff --git a/target/linux/ramips/dts/WIZFI630A.dts b/target/linux/ramips/dts/WIZFI630A.dts
new file mode 100644
index 0000000000..f2818ce9df
--- /dev/null
+++ b/target/linux/ramips/dts/WIZFI630A.dts
@@ -0,0 +1,180 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "wizfi630a", "ralink,rt5350-soc";
+ model = "WIZnet WizFi630A";
+
+ chosen {
+ bootargs = "console=ttyS1,115200";
+ };
+
+ palmbus@10000000 {
+ gpio1: gpio@660 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+
+ uart@500 {
+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0x500 0x100>;
+ resets = <&rstctrl 12>;
+ reset-names = "uart";
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+ reg-shift = <2>;
+ status = "okay";
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "uartl";
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+ reg-shift = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uartlite_pins>;
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag" ;
+ ralink,function = "gpio";
+ };
+ };
+
+ uartf_gpio_pins: uartf_gpio {
+ uartf_gpio {
+ ralink,group = "uartf";
+ ralink,function = "uartf";
+ };
+ };
+
+ uartlite_pins: uartlite {
+ uart {
+ ralink,group = "uartlite";
+ ralink,function = "uartlite";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
+
+ esw@10110000 {
+ ralink,portmap = <0x17>;
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ run {
+ label = "wizfi630a::run";
+ gpios = <&gpio0 1 1>;
+ };
+
+ wps {
+ label = "wizfi630a::wps";
+ gpios = <&gpio0 20 1>;
+ };
+
+ uart1 {
+ label = "wizfi630a::uart1";
+ gpios = <&gpio0 18 1>;
+ };
+
+ uart2 {
+ label = "wizfi630a::uart2";
+ gpios = <&gpio0 21 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 17 1>;
+ linux,code = <0x198>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x211>;
+ };
+
+ scm1 {
+ label = "SCM1";
+ gpios = <&gpio0 19 1>;
+ linux,code = <0x100>;
+ };
+
+ scm2 {
+ label = "SCM2";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x101>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 4632ad2cd3..c24d220032 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -608,7 +608,6 @@ Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U)
Image/Build/Profile/WCR150GN=$(call BuildFirmware/Default4M/$(1),$(1),wcr150gn,WCR150GN)
-
Image/Build/Profile/MZK-DP150N=$(call BuildFirmware/Default4M/$(1),$(1),mzk-dp150n,MZK-DP150N)
buffalo_whrg300n_mtd_size=3801088
@@ -631,6 +630,8 @@ Image/Build/Profile/WHRG300N=$(call BuildFirmware/WHRG300N/$(1),$(1))
Image/Build/Profile/WIZARD8800=$(call BuildFirmware/Default8M/$(1),$(1),wizard-8800,WIZARD8800,Linux Kernel Image)
+Image/Build/Profile/WIZFI630A=$(call BuildFirmware/Default16M/$(1),$(1),wizfi630a,WIZFI630A)
+
Image/Build/Profile/WL-330N=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n,WL-330N)
Image/Build/Profile/WL-330N3G=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n3g,WL-330N3G)
@@ -763,6 +764,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WCR150GN,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
$(call Image/Build/Profile/WIZARD8800,$(1))
+ $(call Image/Build/Profile/WIZFI630A,$(1))
$(call Image/Build/Profile/WL-330N,$(1))
$(call Image/Build/Profile/WL-330N3G,$(1))
$(call Image/Build/Profile/WL-341V3,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/wiznet.mk b/target/linux/ramips/rt305x/profiles/wiznet.mk
new file mode 100644
index 0000000000..f8e8324289
--- /dev/null
+++ b/target/linux/ramips/rt305x/profiles/wiznet.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/WIZFI630A
+ NAME:=WIZnet WizFi630A
+ PACKAGES:=\
+ kmod-usb2
+endef
+
+define Profile/WIZFI630A/Description
+ Package set for WIZnet WizFi630A board
+endef
+$(eval $(call Profile,WIZFI630A))