aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2015-04-14 19:00:51 +0000
committerJohn Crispin <john@openwrt.org>2015-04-14 19:00:51 +0000
commitefbdc168ff03335f811a5660b832f33d8fda2743 (patch)
tree62b9d809fd3d1a6c3ce2330544cf850659394d7c /target/linux
parentcc9a392e4975dc25a0fab1c6f008ff03b025c426 (diff)
downloadupstream-efbdc168ff03335f811a5660b832f33d8fda2743.tar.gz
upstream-efbdc168ff03335f811a5660b832f33d8fda2743.tar.bz2
upstream-efbdc168ff03335f811a5660b832f33d8fda2743.zip
ar71xx: fix ethernet packet loss issues on OM5P-AN
The OM5P-AN boards are suffering from ethernet packet loss when booting with some active POE setups or when switching to Fast Ethernet when previously booted with Gigabit ethernet attached. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV delay in the ETH_CFG register to fix the issue. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45438
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c22
1 files changed, 21 insertions, 1 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
index 7f1d811758..272e410a36 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
@@ -16,6 +16,7 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
+#include <linux/platform_data/phy-at803x.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
@@ -150,6 +151,20 @@ static struct i2c_board_info om5pan_i2c_devs[] __initdata = {
},
};
+static struct at803x_platform_data om5p_an_at803x_data = {
+ .disable_smarteee = 1,
+ .enable_rgmii_rx_delay = 1,
+ .enable_rgmii_tx_delay = 1,
+};
+
+static struct mdio_board_info om5p_an_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 7,
+ .platform_data = &om5p_an_at803x_data,
+ },
+};
+
static void __init om5p_an_setup(void)
{
u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
@@ -171,10 +186,15 @@ static void __init om5p_an_setup(void)
ath79_init_mac(mac, art, 0x02);
ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac);
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_RXD_DELAY |
+ AR934X_ETH_CFG_RDV_DELAY);
ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);
+ mdiobus_register_board_info(om5p_an_mdio0_info,
+ ARRAY_SIZE(om5p_an_mdio0_info));
+
ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);