aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorImre Kaloz <kaloz@openwrt.org>2014-06-17 15:13:10 +0000
committerImre Kaloz <kaloz@openwrt.org>2014-06-17 15:13:10 +0000
commitd775e4ef00e08c839a41e101552be171ff638d3d (patch)
tree4024679a777f738166057959372d0706830fcd7e /target/linux
parent099d998fcf21c80e25a9518607285d1437d89be9 (diff)
downloadupstream-d775e4ef00e08c839a41e101552be171ff638d3d.tar.gz
upstream-d775e4ef00e08c839a41e101552be171ff638d3d.tar.bz2
upstream-d775e4ef00e08c839a41e101552be171ff638d3d.zip
preliminary support for the WRT1900AC (work in progress)
SVN-Revision: 41232
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/mvebu/config-default294
-rw-r--r--target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts242
-rw-r--r--target/linux/mvebu/patches-3.14/001-build_mamba_dts.patch10
-rw-r--r--target/linux/mvebu/patches-3.14/002-revert_i2c_delay.patch15
-rw-r--r--target/linux/mvebu/patches-3.14/003-add_leds_tlc59116_driver.patch529
-rw-r--r--target/linux/mvebu/patches-3.14/008-nand_warn_weak_ecc_strength.patch64
-rw-r--r--target/linux/mvebu/patches-3.14/009-add_of_mtd_ecc_helpers.patch84
-rw-r--r--target/linux/mvebu/patches-3.14/010-pxa3xx_nand_print_ECC_strength.patch22
-rw-r--r--target/linux/mvebu/patches-3.14/011-pxa3xx_nand_clean_error_handling.patch78
-rw-r--r--target/linux/mvebu/patches-3.14/012-pxa3xx_nand_use_ecc_info_from_dt.patch57
-rw-r--r--target/linux/mvebu/patches-3.14/018-decouple_phy_id_and_address.patch102
-rw-r--r--target/linux/mvebu/patches-3.14/019-add_fixed_phy_register.patch134
-rw-r--r--target/linux/mvebu/patches-3.14/020-of_fixed_link_phy.patch170
-rw-r--r--target/linux/mvebu/patches-3.14/021-mvneta_support_fixed_links.patch40
14 files changed, 1841 insertions, 0 deletions
diff --git a/target/linux/mvebu/config-default b/target/linux/mvebu/config-default
new file mode 100644
index 0000000000..202aad13fa
--- /dev/null
+++ b/target/linux/mvebu/config-default
@@ -0,0 +1,294 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_MVEBU=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+CONFIG_ARMADA_370_CLK=y
+CONFIG_ARMADA_370_XP_TIMER=y
+CONFIG_ARMADA_XP_CLK=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_NR_BANKS=8
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BOUNCE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CACHE_PL310=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PJ4B=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+# CONFIG_DEBUG_LL_UART_8250 is not set
+# CONFIG_DEBUG_LL_UART_PL01X is not set
+CONFIG_DEBUG_MVEBU_UART=y
+# CONFIG_DEBUG_MVEBU_UART_ALTERNATE is not set
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+CONFIG_DEBUG_UART_PHYS=0xd0012000
+# CONFIG_DEBUG_UART_PL01X is not set
+CONFIG_DEBUG_UART_VIRT=0xfec12000
+CONFIG_DEBUG_UNCOMPRESS=y
+CONFIG_DEBUG_USER=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_ENGINE_RAID=y
+CONFIG_DMA_OF=y
+CONFIG_DTC=y
+# CONFIG_DW_DMAC_CORE is not set
+# CONFIG_DW_DMAC_PCI is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_FAT_FS=y
+CONFIG_FIXED_PHY=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_MVEBU=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_ISO9660_FS=y
+CONFIG_JBD=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_LEDS_TLC59116=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_370_XP=y
+CONFIG_MACH_ARMADA_XP=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MEMORY=y
+CONFIG_MIGHT_HAVE_PCI=y
+# CONFIG_MLX5_CORE is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MSDOS_FS=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_SM_COMMON is not set
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_MVEBU_CLK_COMMON=y
+CONFIG_MVEBU_CLK_COREDIV=y
+CONFIG_MVEBU_CLK_CPU=y
+CONFIG_MVEBU_DEVBUS=y
+CONFIG_MVEBU_MBUS=y
+CONFIG_MVMDIO=y
+CONFIG_MVNETA=y
+CONFIG_MV_XOR=y
+CONFIG_NEED_DMA_MAP_STATE=y
+# CONFIG_NEON is not set
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_UTF8=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NR_CPUS=4
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MVEBU=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_370=y
+CONFIG_PINCTRL_ARMADA_XP=y
+CONFIG_PINCTRL_MVEBU=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PJ4B_ERRATA_4742=y
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
+CONFIG_PLAT_ORION=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_MV is not set
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_ORION=y
+CONFIG_STOP_MACHINE=y
+CONFIG_SWIOTLB=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_STATS=y
+CONFIG_TREE_RCU=y
+CONFIG_UID16=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFAT_FS=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_XEN is not set
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+# CONFIG_ZBUD is not set
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts
new file mode 100644
index 0000000000..d732764e90
--- /dev/null
+++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts
@@ -0,0 +1,242 @@
+/*
+ * Device Tree file for the Linksys WRT1900AC (Mamba).
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
+ * used.
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+ model = "Linksys WRT1900AC (Mamba)";
+ compatible = "linksys,mamba", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* Etron EJ168 USB 3.0 controller */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* First mini-PCIe port */
+ pcie@2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+
+ /* Second mini-PCIe port */
+ pcie@3,0 {
+ /* Port 0, Lane 3 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ pinctrl {
+ pinctrl-0 = <&pmx_phy_int>;
+ pinctrl-names = "default";
+
+ pmx_ge0: pmx-ge0 {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+
+ pmx_ge1: pmx-ge1 {
+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
+ "mpp16", "mpp17", "mpp18", "mpp19",
+ "mpp20", "mpp21", "mpp22", "mpp23";
+ marvell,function = "ge1";
+ };
+
+ pmx_keys: pmx-keys {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ pmx_spi: pmx-spi {
+ marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
+ marvell,function = "spi";
+ };
+
+ pmx_phy_int: pmx-phy-int {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ clock-frequency = <250000000>;
+ status = "okay";
+ };
+
+ serial@12100 {
+ clock-frequency = <250000000>;
+ status = "okay";
+ };
+
+ sata@a0000 {
+ nr-ports = <1>;
+ status = "okay";
+ };
+
+ mdio {
+ disabled;
+ };
+
+ ethernet@70000 {
+ pinctrl-0 = <&pmx_ge0>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ ethernet@74000 {
+ pinctrl-0 = <&pmx_ge1>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ /* USB part of the eSATA/USB 2.0 port */
+ usb@50000 {
+ status = "okay";
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ tlc59116@68 {
+ #gpio-cells = <2>;
+ compatible = "gpio,tlc59116";
+ reg = <0x68>;
+ gpio-controller;
+ };
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>; /* 1MB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u_env"; //u-boot-env?
+ reg = <0x100000 0x40000>; /* 256KB */
+ read-only;
+ };
+
+ partition@140000 {
+ label = "s_env";
+ reg = <0x140000 0x40000>; /* 256KB */
+ read-only;
+ };
+
+ partition@900000 {
+ label = "devinfo";
+ reg = <0x900000 0x100000>; /* 1MB */
+ };
+
+ partition@a00000 {
+ label = "kernel";
+ reg = <0xa00000 0x2800000>; /* 40MB */
+ };
+
+ partition@d00000 {
+ label = "rootfs";
+ reg = <0xd00000 0x2500000>; /* 37MB */
+ };
+
+ partition@3200000 {
+ label = "alt_kernel";
+ reg = <0x3200000 0x2800000>; /* 40MB */
+ };
+
+ partition@3500000 {
+ label = "alt_rootfs";
+ reg = <0x3500000 0x2500000>; /* 37MB */
+ };
+
+ /* Last MB is for the BBT, i.e. not writable */
+ partition@5a00000 {
+ label = "syscfg";
+ reg = <0x5a00000 0x2600000>; /* ?MB */
+ };
+ };
+
+ spi0: spi@10600 {
+ status = "okay";
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mr25h256";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_keys>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "Factory Reset Button";
+ linux,code = <141>; /* KEY_SETUP */
+ gpios = <&gpio1 1 1>;
+ };
+ };
+};
diff --git a/target/linux/mvebu/patches-3.14/001-build_mamba_dts.patch b/target/linux/mvebu/patches-3.14/001-build_mamba_dts.patch
new file mode 100644
index 0000000000..4ed10b3061
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/001-build_mamba_dts.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-d
+ armada-xp-db.dtb \
+ armada-xp-gp.dtb \
+ armada-xp-netgear-rn2120.dtb \
++ armada-xp-mamba.dtb \
+ armada-xp-matrix.dtb \
+ armada-xp-openblocks-ax3-4.dtb
+ dtb-$(CONFIG_ARCH_MXC) += \
diff --git a/target/linux/mvebu/patches-3.14/002-revert_i2c_delay.patch b/target/linux/mvebu/patches-3.14/002-revert_i2c_delay.patch
new file mode 100644
index 0000000000..77dc1a6383
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/002-revert_i2c_delay.patch
@@ -0,0 +1,15 @@
+--- a/arch/arm/boot/dts/armada-xp.dtsi
++++ b/arch/arm/boot/dts/armada-xp.dtsi
+@@ -43,12 +43,10 @@
+ };
+
+ i2c0: i2c@11000 {
+- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x100>;
+ };
+
+ i2c1: i2c@11100 {
+- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x100>;
+ };
+
diff --git a/target/linux/mvebu/patches-3.14/003-add_leds_tlc59116_driver.patch b/target/linux/mvebu/patches-3.14/003-add_leds_tlc59116_driver.patch
new file mode 100644
index 0000000000..fea668d4fd
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/003-add_leds_tlc59116_driver.patch
@@ -0,0 +1,529 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -487,6 +487,15 @@ config LEDS_BLINKM
+ This option enables support for the BlinkM RGB LED connected
+ through I2C. Say Y to enable support for the BlinkM LED.
+
++config LEDS_TLC59116
++ tristate "LED driver for TLC59116F dimmer"
++ depends on LEDS_CLASS
++ depends on I2C
++ help
++ This option enables support for Texas Instruments TLC59116F
++ LED controller. It is generally only useful
++ as a platform driver
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -54,6 +54,7 @@ obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.
+ obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
+ obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
+ obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
++obj-$(CONFIG_LEDS_TLC59116) += leds-tlc59116.o
+
+ # LED SPI Drivers
+ obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
+--- /dev/null
++++ b/drivers/leds/leds-tlc59116.c
+@@ -0,0 +1,498 @@
++/*
++ * Copyright 2014 Belkin Inc.
++ *
++ * Author: Belkin Inc.
++ *
++ * This file is subject to the terms and conditions of version 2 of
++ * the GNU General Public License. See the file COPYING in the main
++ * directory of this archive for more details.
++ *
++ * LED driver for various TLC59116 I2C LED drivers
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/string.h>
++#include <linux/ctype.h>
++#include <linux/leds.h>
++#include <linux/err.h>
++#include <linux/i2c.h>
++#include <linux/workqueue.h>
++
++/* LED select registers determine the source that drives LED outputs */
++#define TLC59116_LED_OFF 0x0 /* Output LOW */
++#define TLC59116_LED_ON 0x1 /* Output HI-Z */
++#define TLC59116_DIM 0x2 /* Dimming */
++#define TLC59116_BLINK 0x3 /* Blinking */
++
++#define TLC59116_PINS 16
++#define TLC59116_REG_MODE1 0x00 /* Mode register 0 */
++#define MODE1_RESPON_ADDR_MASK 0xF0
++#define MODE1_NORMAL_MODE (0 << 4)
++#define MODE1_SPEED_MODE (1 << 4)
++
++#define TLC59116_REG_MODE2 0x01 /* Mode register 1 */
++#define MODE2_DIM (0 << 5)
++#define MODE2_BLINK (1 << 5)
++#define MODE2_OCH_STOP (0 << 3)
++#define MODE2_OCH_ACK (1 << 3)
++
++#define TLC59116_REG_PWM0 0x02
++#define TLC59116_REG_PWM1 0x03
++#define TLC59116_REG_PWM2 0x04
++#define TLC59116_REG_PWM3 0x05
++#define TLC59116_REG_PWM4 0x06
++#define TLC59116_REG_PWM5 0x07
++#define TLC59116_REG_PWM6 0x08
++#define TLC59116_REG_PWM7 0x09
++#define TLC59116_REG_PWM8 0x0a
++#define TLC59116_REG_PWM9 0x0b
++#define TLC59116_REG_PWM10 0x0c
++#define TLC59116_REG_PWM11 0x0d
++#define TLC59116_REG_PWM12 0x0e
++#define TLC59116_REG_PWM13 0x0f
++#define TLC59116_REG_PWM14 0x10
++#define TLC59116_REG_PWM15 0x01
++
++#define TLC59116_REG_GRPPWM 0x12
++#define TLC59116_REG_GRPFREQ 0x13
++
++#define TLC59116_PERIOD_MIN 41 /* 41ms */
++#define TLC59116_PERIOD_MAX 10730 /* 10.73s */
++
++#define TLC59116_REG_LEDOUT0 0x14 /* LED [3:0] driver output state registers */
++#define TLC59116_REG_LEDOUT1 0x15 /* LED [7:4] driver output state registers */
++#define TLC59116_REG_LEDOUT2 0x16 /* LED [11:8] driver output state registers */
++#define TLC59116_REG_LEDOUT3 0x17 /* LED [15:12] driver output state registers */
++
++#define GPIO0_MASK 0x3
++
++#define DEBUG 0
++
++#if DEBUG > 1
++#define led_dbg(fmt, arg...) printk(KERN_DEBUG "tlc59116:%s " fmt "\n", __func__ , ## arg)
++#else
++#define led_dbg(fmt, arg...)
++#endif
++
++
++#if DEBUG > 0
++#define led_info(fmt, arg...) printk("tlc59116:%s " fmt "\n", __func__ , ## arg)
++#else
++#define led_info(fmt, arg...)
++#endif
++
++enum tlc59116_type {
++ tlc59116,
++};
++
++struct tlc59116_chipdef {
++ int bits;
++ u8 slv_addr; /* 7-bit slave address mask */
++ int slv_addr_shift; /* Number of bits to ignore */
++};
++
++static struct tlc59116_chipdef tlc59116_chipdefs[] = {
++ [tlc59116] = {
++ .bits = 16,
++ .slv_addr = /* 1100xxx */ 0x68,
++ .slv_addr_shift = 3,
++ },
++};
++
++static const struct i2c_device_id tlc59116_id[] = {
++ { "tlc59116", tlc59116 },
++ { }
++};
++MODULE_DEVICE_TABLE(i2c, tlc59116_id);
++
++struct tlc59116_led {
++ struct tlc59116_chipdef *chipdef;
++ struct i2c_client *client;
++ struct work_struct work;
++ spinlock_t lock;
++ enum led_brightness brightness;
++ struct led_classdev led_cdev;
++ int led_num; /* 0 .. 8 potentially */
++ char name[32];
++};
++
++//#define DUMP_REGS
++
++#ifdef DUMP_REGS
++void dump_regs(struct i2c_client *client)
++{
++ int i, j = 0;
++ u8 data;
++ printk ("\n-------------------------------------\n");
++ for (i = 0; i< 0x20; i++)
++ {
++ data = i2c_smbus_read_byte_data(client, i);
++ printk ("[0x%x] = 0x%x ",i, data);
++ j++;
++ if (j == 5)
++ {
++ printk ("\n");
++ j = 0;
++ }
++ }
++ printk ("\n");
++}
++#endif
++
++static int tlc59116_set_mode(struct i2c_client *client, uint8_t mode)
++{
++ uint8_t val = 0;
++
++ if ((mode != MODE2_DIM) && (mode != MODE2_BLINK))
++ mode = MODE2_DIM;
++
++ /* Configure MODE1 register */
++ val &= 0x0;
++ val &= MODE1_RESPON_ADDR_MASK;
++ val |= MODE1_NORMAL_MODE;
++ i2c_smbus_write_byte_data(client, TLC59116_REG_MODE1, val);
++
++ /* Configure MODE2 Reg */
++ val &= 0x00;
++ val |= MODE2_OCH_STOP;
++
++ val |= mode;
++
++ i2c_smbus_write_byte_data(client, TLC59116_REG_MODE2, val);
++ mdelay(100);
++
++ return 0;
++}
++
++static int tlc59116_set_gpio_act(struct i2c_client *client, u8 gpio_no, u8 act_mode)
++{
++ char data, addr = 0, i;
++
++ if ((gpio_no >= 0) && (gpio_no < 4))
++ addr = TLC59116_REG_LEDOUT0;
++ else if ((gpio_no >= 4) && (gpio_no < 8))
++ addr = TLC59116_REG_LEDOUT1;
++ else if ((gpio_no >= 8) && (gpio_no < 12))
++ addr = TLC59116_REG_LEDOUT2;
++ else if ((gpio_no >=12 ) && (gpio_no < 16))
++ addr = TLC59116_REG_LEDOUT3;
++
++ data = i2c_smbus_read_byte_data(client, addr);
++
++ i = (gpio_no % 4) * 2;
++
++ data &= ~(GPIO0_MASK << i);
++ act_mode = act_mode << i;
++ data |= act_mode;
++
++ if(i2c_smbus_write_byte_data(client, addr, data) != 0) {
++ return -1;
++ }
++ return 0;
++}
++
++static int tlc59116_set_gpio(struct i2c_client *client, uint8_t gpio_no, uint8_t val)
++{
++ val &= 0x03;
++ tlc59116_set_gpio_act(client, gpio_no, val);
++#ifdef DUMP_REGS
++ dump_regs(client);
++#endif
++ return 0;
++}
++
++static int tlc59116_get_gpio(struct i2c_client *client, uint8_t gpio_no)
++{
++ uint8_t val, reg, data;
++
++ led_dbg("gpio = %d\n", gpio_no);
++ reg = TLC59116_REG_LEDOUT0;
++
++ if ((gpio_no >= 0) && (gpio_no < 4))
++ reg = TLC59116_REG_LEDOUT0;
++ else if ((gpio_no >= 4) && (gpio_no < 8)) {
++ reg = TLC59116_REG_LEDOUT1;
++ gpio_no = gpio_no - 4;
++ }
++ else if ((gpio_no >= 8) && (gpio_no < 12)) {
++ reg = TLC59116_REG_LEDOUT2;
++ gpio_no = gpio_no - 8;
++ }
++ else if ((gpio_no >=12 ) && (gpio_no < 16)) {
++ reg = TLC59116_REG_LEDOUT3;
++ gpio_no = gpio_no - 12;
++ }
++
++ val = i2c_smbus_read_byte_data(client, reg);
++
++ data = (val >> (gpio_no * 2)) & 0x03;
++ return data;
++}
++
++/*
++ * gpio_no [0..7]
++ * duty_cycle [0..99]%
++ *
++ * */
++static int tlc59116_individual_brighness_control(struct i2c_client *client, uint8_t gpio_no, uint8_t brightness)
++{
++ uint8_t pwm;
++
++ pwm = gpio_no + TLC59116_REG_PWM0;
++ i2c_smbus_write_byte_data(client, pwm, brightness);
++
++ return 0;
++}
++
++static void tlc59116_led_work(struct work_struct *work)
++{
++ struct tlc59116_led *tlc59116;
++
++ tlc59116 = container_of(work, struct tlc59116_led, work);
++
++ led_dbg("\nbrighness = %d \n", tlc59116->brightness);
++ switch (tlc59116->brightness) {
++ case LED_OFF:
++ led_info("\nLed off\n");
++ tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_OFF);
++ break;
++
++ case LED_FULL:
++ led_info("\nLed on\n");
++ tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_ON);
++ break;
++ default:
++ led_info("\nBrightness is %d\n", tlc59116->brightness);
++ if (TLC59116_BLINK != tlc59116_get_gpio(tlc59116->client, tlc59116->led_num))
++ tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_DIM);
++
++ tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
++ break;
++ }
++
++}
++
++static void tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++ struct tlc59116_led *tlc59116;
++
++ tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev);
++
++ spin_lock(&tlc59116->lock);
++ tlc59116->brightness = value;
++
++ /*
++ * Must use workqueue for the actual I/O since I2C operations
++ * can sleep.
++ */
++ schedule_work(&tlc59116->work);
++
++ spin_unlock(&tlc59116->lock);
++}
++
++/*
++ * delay_on, delay_off: units are in ms
++ *
++ */
++
++static int tlc59116_set_blink(struct led_classdev *led_cdev,
++ unsigned long *delay_on,
++ unsigned long *delay_off)
++{
++ struct tlc59116_led *tlc59116;
++ uint16_t period;
++ uint16_t duty_cycle;
++ uint8_t gdc;
++ uint8_t gfrq;
++
++ tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev);
++ led_info ("Blinking: delay_on = %ldms, delay_off = %ldms, brightness = %d\n",
++ *delay_on, *delay_off, tlc59116->brightness);
++
++ // Hardware blinking only for tricolor leds . The rest will have software blinking
++ if (tlc59116->led_num > 2)
++ return 1;
++
++ if ((*delay_on == 0) && (*delay_off ==0)) {
++ spin_lock(&tlc59116->lock);
++
++ /* MODE2[DMBLNK] = 1 */
++ tlc59116_set_mode(tlc59116->client, MODE2_BLINK);
++
++ /* Set LDRx = 11 */
++ tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK);
++
++ tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
++ spin_unlock(&tlc59116->lock);
++ return 0;
++ }
++
++
++ if ((*delay_on + *delay_off) > TLC59116_PERIOD_MAX)
++ {
++ led_dbg ("Max period is %dms\n", TLC59116_PERIOD_MAX);
++ return -EINVAL;
++ }
++
++ if ((*delay_on + *delay_off) < TLC59116_PERIOD_MIN)
++ {
++ *delay_on = TLC59116_PERIOD_MIN/2 + 1;
++ *delay_off = TLC59116_PERIOD_MIN/2 + 1;
++ }
++ period = (*delay_on) + (*delay_off);
++
++ duty_cycle = (100 * (*delay_on)) / period;
++
++ spin_lock(&tlc59116->lock);
++
++ /* MODE2[DMBLNK] = 1 */
++ tlc59116_set_mode(tlc59116->client, MODE2_BLINK);
++
++ /* Set LDRx = 11 */
++ tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK);
++
++ tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
++
++ gdc = (duty_cycle * 256)/100;
++ i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPPWM, gdc);
++
++ gfrq = (24 * period)/1000 - 1; /* unit is in second (convert from ms to second) */
++ i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPFREQ, gfrq);
++
++
++#ifdef DUMP_REGS
++ dump_regs(tlc59116->client);
++#endif
++
++ spin_unlock(&tlc59116->lock);
++ return 0;
++}
++
++static int tlc59116_probe(struct i2c_client *client,
++ const struct i2c_device_id *id)
++{
++ struct tlc59116_led *tlc59116;
++ struct tlc59116_chipdef *chip;
++ struct i2c_adapter *adapter;
++ struct led_platform_data *pdata;
++ int i, err;
++
++ chip = &tlc59116_chipdefs[id->driver_data];
++ adapter = to_i2c_adapter(client->dev.parent);
++ pdata = client->dev.platform_data;
++
++ /* Make sure the slave address / chip type combo given is possible */
++ if ((client->addr & ~((1 << chip->slv_addr_shift) - 1)) !=
++ chip->slv_addr) {
++ dev_err(&client->dev, "invalid slave address %02x\n",
++ client->addr);
++ return -ENODEV;
++ }
++
++ printk(KERN_INFO "leds-tlc59116: Using %s %d-bit LED driver at "
++ "slave address 0x%02x\n",
++ id->name, chip->bits, client->addr);
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
++ return -EIO;
++
++ if (pdata) {
++ if (pdata->num_leds != chip->bits) {
++ dev_err(&client->dev, "board info claims %d LEDs"
++ " on a %d-bit chip\n",
++ pdata->num_leds, chip->bits);
++ return -ENODEV;
++ }
++ }
++
++ tlc59116 = devm_kzalloc(&client->dev, sizeof(*tlc59116) * chip->bits, GFP_KERNEL);
++ if (!tlc59116)
++ return -ENOMEM;
++
++ i2c_set_clientdata(client, tlc59116);
++
++ for (i = 0; i < chip->bits; i++) {
++ tlc59116[i].chipdef = chip;
++ tlc59116[i].client = client;
++ tlc59116[i].led_num = i;
++
++ /* Platform data can specify LED names and default triggers */
++ if (pdata) {
++ if (pdata->leds[i].name)
++ snprintf(tlc59116[i].name,
++ sizeof(tlc59116[i].name), "tlc59116:%s",
++ pdata->leds[i].name);
++ if (pdata->leds[i].default_trigger)
++ tlc59116[i].led_cdev.default_trigger =
++ pdata->leds[i].default_trigger;
++ } else {
++ snprintf(tlc59116[i].name, sizeof(tlc59116[i].name),
++ "tlc59116:%d", i);
++ }
++
++ spin_lock_init(&tlc59116[i].lock);
++
++ tlc59116[i].led_cdev.name = tlc59116[i].name;
++ tlc59116[i].led_cdev.brightness_set = tlc59116_led_set;
++ tlc59116[i].led_cdev.blink_set = tlc59116_set_blink;
++ tlc59116[i].led_cdev.brightness = 0;
++
++ INIT_WORK(&tlc59116[i].work, tlc59116_led_work);
++
++ err = led_classdev_register(&client->dev, &tlc59116[i].led_cdev);
++ if (err < 0)
++ goto exit;
++ }
++
++ tlc59116_set_mode(client, MODE2_DIM);
++
++ /* Turn off LEDs */
++ for (i = 0; i < chip->bits; i++)
++ tlc59116_set_gpio(client, i, TLC59116_LED_OFF);
++
++ return 0;
++
++exit:
++ while (i--) {
++ led_classdev_unregister(&tlc59116[i].led_cdev);
++ cancel_work_sync(&tlc59116[i].work);
++ }
++
++ devm_kfree(&client->dev, tlc59116);
++ i2c_set_clientdata(client, NULL);
++
++ return err;
++}
++
++static int tlc59116_remove(struct i2c_client *client)
++{
++ struct tlc59116_led *tlc59116 = i2c_get_clientdata(client);
++ int i;
++
++ for (i = 0; i < tlc59116->chipdef->bits; i++) {
++ led_classdev_unregister(&tlc59116[i].led_cdev);
++ cancel_work_sync(&tlc59116[i].work);
++ }
++
++ devm_kfree(&client->dev, tlc59116);
++ i2c_set_clientdata(client, NULL);
++
++ return 0;
++}
++
++static struct i2c_driver tlc59116_driver = {
++ .driver = {
++ .name = "leds-tlc59116",
++ .owner = THIS_MODULE,
++ },
++ .probe = tlc59116_probe,
++ .remove = tlc59116_remove,
++ .id_table = tlc59116_id,
++};
++
++module_i2c_driver(tlc59116_driver);
++
++MODULE_AUTHOR("Belkin Inc.");
++MODULE_DESCRIPTION("TLC59116 LED driver");
++MODULE_LICENSE("GPL v2");
diff --git a/target/linux/mvebu/patches-3.14/008-nand_warn_weak_ecc_strength.patch b/target/linux/mvebu/patches-3.14/008-nand_warn_weak_ecc_strength.patch
new file mode 100644
index 0000000000..09bb72cf4e
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/008-nand_warn_weak_ecc_strength.patch
@@ -0,0 +1,64 @@
+From 67a9ad9b8a6f6ea76ef8fc484ae49970d72d5534 Mon Sep 17 00:00:00 2001
+From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Date: Wed, 14 May 2014 14:58:06 -0300
+Subject: mtd: nand: Warn the user if the selected ECC strength is too weak
+
+This commit makes use of the chip->ecc_strength_ds and chip->ecc_step_ds which
+contain the datasheet minimum requested ECC strength to produce a noisy warning
+if the configured ECC strength is weaker.
+
+Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -3682,6 +3682,39 @@ int nand_scan_ident(struct mtd_info *mtd
+ }
+ EXPORT_SYMBOL(nand_scan_ident);
+
++/*
++ * Check if the chip configuration meet the datasheet requirements.
++
++ * If our configuration corrects A bits per B bytes and the minimum
++ * required correction level is X bits per Y bytes, then we must ensure
++ * both of the following are true:
++ *
++ * (1) A / B >= X / Y
++ * (2) A >= X
++ *
++ * Requirement (1) ensures we can correct for the required bitflip density.
++ * Requirement (2) ensures we can correct even when all bitflips are clumped
++ * in the same sector.
++ */
++static bool nand_ecc_strength_good(struct mtd_info *mtd)
++{
++ struct nand_chip *chip = mtd->priv;
++ struct nand_ecc_ctrl *ecc = &chip->ecc;
++ int corr, ds_corr;
++
++ if (ecc->size == 0 || chip->ecc_step_ds == 0)
++ /* Not enough information */
++ return true;
++
++ /*
++ * We get the number of corrected bits per page to compare
++ * the correction density.
++ */
++ corr = (mtd->writesize * ecc->strength) / ecc->size;
++ ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds;
++
++ return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
++}
+
+ /**
+ * nand_scan_tail - [NAND Interface] Scan for the NAND device
+@@ -3891,6 +3924,9 @@ int nand_scan_tail(struct mtd_info *mtd)
+ ecc->layout->oobavail += ecc->layout->oobfree[i].length;
+ mtd->oobavail = ecc->layout->oobavail;
+
++ /* ECC sanity check: warn noisily if it's too weak */
++ WARN_ON(!nand_ecc_strength_good(mtd));
++
+ /*
+ * Set the number of read / write steps for one page depending on ECC
+ * mode.
diff --git a/target/linux/mvebu/patches-3.14/009-add_of_mtd_ecc_helpers.patch b/target/linux/mvebu/patches-3.14/009-add_of_mtd_ecc_helpers.patch
new file mode 100644
index 0000000000..d48885f8e3
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/009-add_of_mtd_ecc_helpers.patch
@@ -0,0 +1,84 @@
+From 6d9434ebb76157071164b32ad03fbed165c74382 Mon Sep 17 00:00:00 2001
+From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Date: Mon, 24 Feb 2014 19:24:48 -0300
+Subject: of_mtd: Add helpers to get ECC strength and ECC step size
+
+This commit adds simple helpers to obtain the devicetree properties
+that specify the ECC strength and ECC step size to use on a given
+NAND controller.
+
+Acked-by: Boris BREZILLON <b.brezillon.dev@gmail.com>
+Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+
+--- a/drivers/of/of_mtd.c
++++ b/drivers/of/of_mtd.c
+@@ -50,6 +50,40 @@ int of_get_nand_ecc_mode(struct device_n
+ EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
+
+ /**
++ * of_get_nand_ecc_step_size - Get ECC step size associated to
++ * the required ECC strength (see below).
++ * @np: Pointer to the given device_node
++ *
++ * return the ECC step size, or errno in error case.
++ */
++int of_get_nand_ecc_step_size(struct device_node *np)
++{
++ int ret;
++ u32 val;
++
++ ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
++ return ret ? ret : val;
++}
++EXPORT_SYMBOL_GPL(of_get_nand_ecc_step_size);
++
++/**
++ * of_get_nand_ecc_strength - Get required ECC strength over the
++ * correspnding step size as defined by 'nand-ecc-size'
++ * @np: Pointer to the given device_node
++ *
++ * return the ECC strength, or errno in error case.
++ */
++int of_get_nand_ecc_strength(struct device_node *np)
++{
++ int ret;
++ u32 val;
++
++ ret = of_property_read_u32(np, "nand-ecc-strength", &val);
++ return ret ? ret : val;
++}
++EXPORT_SYMBOL_GPL(of_get_nand_ecc_strength);
++
++/**
+ * of_get_nand_bus_width - Get nand bus witdh for given device_node
+ * @np: Pointer to the given device_node
+ *
+--- a/include/linux/of_mtd.h
++++ b/include/linux/of_mtd.h
+@@ -13,6 +13,8 @@
+
+ #include <linux/of.h>
+ int of_get_nand_ecc_mode(struct device_node *np);
++int of_get_nand_ecc_step_size(struct device_node *np);
++int of_get_nand_ecc_strength(struct device_node *np);
+ int of_get_nand_bus_width(struct device_node *np);
+ bool of_get_nand_on_flash_bbt(struct device_node *np);
+
+@@ -22,6 +24,16 @@ static inline int of_get_nand_ecc_mode(s
+ {
+ return -ENOSYS;
+ }
++
++static inline int of_get_nand_ecc_step_size(struct device_node *np)
++{
++ return -ENOSYS;
++}
++
++static inline int of_get_nand_ecc_strength(struct device_node *np)
++{
++ return -ENOSYS;
++}
+
+ static inline int of_get_nand_bus_width(struct device_node *np)
+ {
diff --git a/target/linux/mvebu/patches-3.14/010-pxa3xx_nand_print_ECC_strength.patch b/target/linux/mvebu/patches-3.14/010-pxa3xx_nand_print_ECC_strength.patch
new file mode 100644
index 0000000000..d02f5fea50
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/010-pxa3xx_nand_print_ECC_strength.patch
@@ -0,0 +1,22 @@
+From e634ce51baa52c131e4a35c01bba9e596a0eb86d Mon Sep 17 00:00:00 2001
+From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Date: Thu, 27 Feb 2014 14:13:26 -0300
+Subject: mtd: nand: pxa3xx: Print actual ECC strength in error message
+
+The actual ECC strength used to select the ECC scheme is 'ecc_strength'.
+Use it in the error message.
+
+Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -1531,7 +1531,7 @@ KEEP_CONFIG:
+ if (!ret) {
+ dev_err(&info->pdev->dev,
+ "ECC strength %d at page size %d is not supported\n",
+- chip->ecc_strength_ds, mtd->writesize);
++ ecc_strength, mtd->writesize);
+ return -ENODEV;
+ }
+
diff --git a/target/linux/mvebu/patches-3.14/011-pxa3xx_nand_clean_error_handling.patch b/target/linux/mvebu/patches-3.14/011-pxa3xx_nand_clean_error_handling.patch
new file mode 100644
index 0000000000..06757e803e
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/011-pxa3xx_nand_clean_error_handling.patch
@@ -0,0 +1,78 @@
+From eee0166d8ead9d719d794df3e66acd8f83630e05 Mon Sep 17 00:00:00 2001
+From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Date: Wed, 14 May 2014 14:58:07 -0300
+Subject: mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling
+
+Let's make pxa_ecc_init() return a negative errno on error or zero
+if succesful, which is standard kernel practice. Also, report the
+selected ECC strength and step size, which is important information.
+
+Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -1355,7 +1355,6 @@ static int pxa_ecc_init(struct pxa3xx_na
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = 512;
+ ecc->strength = 1;
+- return 1;
+
+ } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) {
+ info->chunk_size = 512;
+@@ -1364,7 +1363,6 @@ static int pxa_ecc_init(struct pxa3xx_na
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = 512;
+ ecc->strength = 1;
+- return 1;
+
+ /*
+ * Required ECC: 4-bit correction per 512 bytes
+@@ -1379,7 +1377,6 @@ static int pxa_ecc_init(struct pxa3xx_na
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_2KB_bch4bit;
+ ecc->strength = 16;
+- return 1;
+
+ } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
+ info->ecc_bch = 1;
+@@ -1390,7 +1387,6 @@ static int pxa_ecc_init(struct pxa3xx_na
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_4KB_bch4bit;
+ ecc->strength = 16;
+- return 1;
+
+ /*
+ * Required ECC: 8-bit correction per 512 bytes
+@@ -1405,8 +1401,15 @@ static int pxa_ecc_init(struct pxa3xx_na
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_4KB_bch8bit;
+ ecc->strength = 16;
+- return 1;
++ } else {
++ dev_err(&info->pdev->dev,
++ "ECC strength %d at page size %d is not supported\n",
++ strength, page_size);
++ return -ENODEV;
+ }
++
++ dev_info(&info->pdev->dev, "ECC strength %d, ECC step size %d\n",
++ ecc->strength, ecc->size);
+ return 0;
+ }
+
+@@ -1528,12 +1531,8 @@ KEEP_CONFIG:
+
+ ret = pxa_ecc_init(info, &chip->ecc, ecc_strength,
+ ecc_step, mtd->writesize);
+- if (!ret) {
+- dev_err(&info->pdev->dev,
+- "ECC strength %d at page size %d is not supported\n",
+- ecc_strength, mtd->writesize);
+- return -ENODEV;
+- }
++ if (ret)
++ return ret;
+
+ /* calculate addressing information */
+ if (mtd->writesize >= 2048)
diff --git a/target/linux/mvebu/patches-3.14/012-pxa3xx_nand_use_ecc_info_from_dt.patch b/target/linux/mvebu/patches-3.14/012-pxa3xx_nand_use_ecc_info_from_dt.patch
new file mode 100644
index 0000000000..8b5cc5bb3c
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/012-pxa3xx_nand_use_ecc_info_from_dt.patch
@@ -0,0 +1,57 @@
+From 5b3e507820c6e120bc2680c0d35f9d9d81fcb98d Mon Sep 17 00:00:00 2001
+From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Date: Wed, 14 May 2014 14:58:08 -0300
+Subject: mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding
+
+This commit adds support for the user to specify the ECC strength
+and step size through the devicetree. We keep the previous behavior,
+when there is no DT parameter provided.
+
+Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -1520,8 +1520,13 @@ KEEP_CONFIG:
+ }
+ }
+
+- ecc_strength = chip->ecc_strength_ds;
+- ecc_step = chip->ecc_step_ds;
++ if (pdata->ecc_strength && pdata->ecc_step_size) {
++ ecc_strength = pdata->ecc_strength;
++ ecc_step = pdata->ecc_step_size;
++ } else {
++ ecc_strength = chip->ecc_strength_ds;
++ ecc_step = chip->ecc_step_ds;
++ }
+
+ /* Set default ECC strength requirements on non-ONFI devices */
+ if (ecc_strength < 1 && ecc_step < 1) {
+@@ -1730,6 +1735,14 @@ static int pxa3xx_nand_probe_dt(struct p
+ of_property_read_u32(np, "num-cs", &pdata->num_cs);
+ pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
+
++ pdata->ecc_strength = of_get_nand_ecc_strength(np);
++ if (pdata->ecc_strength < 0)
++ pdata->ecc_strength = 0;
++
++ pdata->ecc_step_size = of_get_nand_ecc_step_size(np);
++ if (pdata->ecc_step_size < 0)
++ pdata->ecc_step_size = 0;
++
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+--- a/include/linux/platform_data/mtd-nand-pxa3xx.h
++++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
+@@ -58,6 +58,9 @@ struct pxa3xx_nand_platform_data {
+ /* use an flash-based bad block table */
+ bool flash_bbt;
+
++ /* requested ECC strength and ECC step size */
++ int ecc_strength, ecc_step_size;
++
+ const struct mtd_partition *parts[NUM_CHIP_SELECT];
+ unsigned int nr_parts[NUM_CHIP_SELECT];
+
diff --git a/target/linux/mvebu/patches-3.14/018-decouple_phy_id_and_address.patch b/target/linux/mvebu/patches-3.14/018-decouple_phy_id_and_address.patch
new file mode 100644
index 0000000000..4ab6738a10
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/018-decouple_phy_id_and_address.patch
@@ -0,0 +1,102 @@
+From 9b744942290c168287013f0a19ff7392f65c8107 Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Date: Fri, 16 May 2014 16:14:03 +0200
+Subject: net: phy: decouple PHY id and PHY address in fixed PHY driver
+
+Until now, the fixed_phy_add() function was taking as argument
+'phy_id', which was used both as the PHY address on the fake fixed
+MDIO bus, and as the PHY id, as available in the MII_PHYSID1 and
+MII_PHYSID2 registers. However, those two informations are completely
+unrelated.
+
+This patch decouples them. The PHY id of fixed PHYs is hardcoded to be
+0x0. Ideally, a really reserved value would be nicer, but there
+doesn't seem to be an easy of making sure a dummy value can be
+assigned to the Linux kernel for such usage.
+
+The PHY address remains passed by the caller of phy_fixed_add().
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Tested-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+
+--- a/drivers/net/phy/fixed.c
++++ b/drivers/net/phy/fixed.c
+@@ -31,7 +31,7 @@ struct fixed_mdio_bus {
+ };
+
+ struct fixed_phy {
+- int id;
++ int addr;
+ u16 regs[MII_REGS_NUM];
+ struct phy_device *phydev;
+ struct fixed_phy_status status;
+@@ -104,8 +104,8 @@ static int fixed_phy_update_regs(struct
+ if (fp->status.asym_pause)
+ lpa |= LPA_PAUSE_ASYM;
+
+- fp->regs[MII_PHYSID1] = fp->id >> 16;
+- fp->regs[MII_PHYSID2] = fp->id;
++ fp->regs[MII_PHYSID1] = 0;
++ fp->regs[MII_PHYSID2] = 0;
+
+ fp->regs[MII_BMSR] = bmsr;
+ fp->regs[MII_BMCR] = bmcr;
+@@ -115,7 +115,7 @@ static int fixed_phy_update_regs(struct
+ return 0;
+ }
+
+-static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
++static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
+ {
+ struct fixed_mdio_bus *fmb = bus->priv;
+ struct fixed_phy *fp;
+@@ -124,7 +124,7 @@ static int fixed_mdio_read(struct mii_bu
+ return -1;
+
+ list_for_each_entry(fp, &fmb->phys, node) {
+- if (fp->id == phy_id) {
++ if (fp->addr == phy_addr) {
+ /* Issue callback if user registered it. */
+ if (fp->link_update) {
+ fp->link_update(fp->phydev->attached_dev,
+@@ -138,7 +138,7 @@ static int fixed_mdio_read(struct mii_bu
+ return 0xFFFF;
+ }
+
+-static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num,
++static int fixed_mdio_write(struct mii_bus *bus, int phy_addr, int reg_num,
+ u16 val)
+ {
+ return 0;
+@@ -160,7 +160,7 @@ int fixed_phy_set_link_update(struct phy
+ return -EINVAL;
+
+ list_for_each_entry(fp, &fmb->phys, node) {
+- if (fp->id == phydev->phy_id) {
++ if (fp->addr == phydev->addr) {
+ fp->link_update = link_update;
+ fp->phydev = phydev;
+ return 0;
+@@ -171,7 +171,7 @@ int fixed_phy_set_link_update(struct phy
+ }
+ EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
+
+-int fixed_phy_add(unsigned int irq, int phy_id,
++int fixed_phy_add(unsigned int irq, int phy_addr,
+ struct fixed_phy_status *status)
+ {
+ int ret;
+@@ -184,9 +184,9 @@ int fixed_phy_add(unsigned int irq, int
+
+ memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM);
+
+- fmb->irqs[phy_id] = irq;
++ fmb->irqs[phy_addr] = irq;
+
+- fp->id = phy_id;
++ fp->addr = phy_addr;
+ fp->status = *status;
+
+ ret = fixed_phy_update_regs(fp);
diff --git a/target/linux/mvebu/patches-3.14/019-add_fixed_phy_register.patch b/target/linux/mvebu/patches-3.14/019-add_fixed_phy_register.patch
new file mode 100644
index 0000000000..ad37aabcf6
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/019-add_fixed_phy_register.patch
@@ -0,0 +1,134 @@
+From a75951217472c522c324adb0a4de3ba69d656ef5 Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Date: Fri, 16 May 2014 16:14:04 +0200
+Subject: net: phy: extend fixed driver with fixed_phy_register()
+
+The existing fixed_phy_add() function has several drawbacks that
+prevents it from being used as is for OF-based declaration of fixed
+PHYs:
+
+ * The address of the PHY on the fake bus needs to be passed, while a
+ dynamic allocation is desired.
+
+ * Since the phy_device instantiation is post-poned until the next
+ mdiobus scan, there is no way to associate the fixed PHY with its
+ OF node, which later prevents of_phy_connect() from finding this
+ fixed PHY from a given OF node.
+
+To solve this, this commit introduces fixed_phy_register(), which will
+allocate an available PHY address, add the PHY using fixed_phy_add()
+and instantiate the phy_device structure associated with the provided
+OF node.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Acked-by: Florian Fainelli <f.fainelli@gmail.com>
+Acked-by: Grant Likely <grant.likely@linaro.org>
+Tested-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+
+--- a/drivers/net/phy/fixed.c
++++ b/drivers/net/phy/fixed.c
+@@ -21,6 +21,7 @@
+ #include <linux/phy_fixed.h>
+ #include <linux/err.h>
+ #include <linux/slab.h>
++#include <linux/of.h>
+
+ #define MII_REGS_NUM 29
+
+@@ -203,6 +204,66 @@ err_regs:
+ }
+ EXPORT_SYMBOL_GPL(fixed_phy_add);
+
++void fixed_phy_del(int phy_addr)
++{
++ struct fixed_mdio_bus *fmb = &platform_fmb;
++ struct fixed_phy *fp, *tmp;
++
++ list_for_each_entry_safe(fp, tmp, &fmb->phys, node) {
++ if (fp->addr == phy_addr) {
++ list_del(&fp->node);
++ kfree(fp);
++ return;
++ }
++ }
++}
++EXPORT_SYMBOL_GPL(fixed_phy_del);
++
++static int phy_fixed_addr;
++static DEFINE_SPINLOCK(phy_fixed_addr_lock);
++
++int fixed_phy_register(unsigned int irq,
++ struct fixed_phy_status *status,
++ struct device_node *np)
++{
++ struct fixed_mdio_bus *fmb = &platform_fmb;
++ struct phy_device *phy;
++ int phy_addr;
++ int ret;
++
++ /* Get the next available PHY address, up to PHY_MAX_ADDR */
++ spin_lock(&phy_fixed_addr_lock);
++ if (phy_fixed_addr == PHY_MAX_ADDR) {
++ spin_unlock(&phy_fixed_addr_lock);
++ return -ENOSPC;
++ }
++ phy_addr = phy_fixed_addr++;
++ spin_unlock(&phy_fixed_addr_lock);
++
++ ret = fixed_phy_add(PHY_POLL, phy_addr, status);
++ if (ret < 0)
++ return ret;
++
++ phy = get_phy_device(fmb->mii_bus, phy_addr, false);
++ if (!phy || IS_ERR(phy)) {
++ fixed_phy_del(phy_addr);
++ return -EINVAL;
++ }
++
++ of_node_get(np);
++ phy->dev.of_node = np;
++
++ ret = phy_device_register(phy);
++ if (ret) {
++ phy_device_free(phy);
++ of_node_put(np);
++ fixed_phy_del(phy_addr);
++ return ret;
++ }
++
++ return 0;
++}
++
+ static int __init fixed_mdio_bus_init(void)
+ {
+ struct fixed_mdio_bus *fmb = &platform_fmb;
+--- a/include/linux/phy_fixed.h
++++ b/include/linux/phy_fixed.h
+@@ -9,15 +9,26 @@ struct fixed_phy_status {
+ int asym_pause;
+ };
+
++struct device_node;
++
+ #ifdef CONFIG_FIXED_PHY
+ extern int fixed_phy_add(unsigned int irq, int phy_id,
+ struct fixed_phy_status *status);
++extern int fixed_phy_register(unsigned int irq,
++ struct fixed_phy_status *status,
++ struct device_node *np);
+ #else
+ static inline int fixed_phy_add(unsigned int irq, int phy_id,
+ struct fixed_phy_status *status)
+ {
+ return -ENODEV;
+ }
++static inline int fixed_phy_register(unsigned int irq,
++ struct fixed_phy_status *status,
++ struct device_node *np)
++{
++ return -ENODEV;
++}
+ #endif /* CONFIG_FIXED_PHY */
+
+ /*
diff --git a/target/linux/mvebu/patches-3.14/020-of_fixed_link_phy.patch b/target/linux/mvebu/patches-3.14/020-of_fixed_link_phy.patch
new file mode 100644
index 0000000000..1f68576c91
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/020-of_fixed_link_phy.patch
@@ -0,0 +1,170 @@
+From 3be2a49e5c08d268f8af0dd4fe89a24ea8cdc339 Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Date: Fri, 16 May 2014 16:14:05 +0200
+Subject: of: provide a binding for fixed link PHYs
+
+Some Ethernet MACs have a "fixed link", and are not connected to a
+normal MDIO-managed PHY device. For those situations, a Device Tree
+binding allows to describe a "fixed link" using a special PHY node.
+
+This patch adds:
+
+ * A documentation for the fixed PHY Device Tree binding.
+
+ * An of_phy_is_fixed_link() function that an Ethernet driver can call
+ on its PHY phandle to find out whether it's a fixed link PHY or
+ not. It should typically be used to know if
+ of_phy_register_fixed_link() should be called.
+
+ * An of_phy_register_fixed_link() function that instantiates the
+ fixed PHY into the PHY subsystem, so that when the driver calls
+ of_phy_connect(), the PHY device associated to the OF node will be
+ found.
+
+These two additional functions also support the old fixed-link Device
+Tree binding used on PowerPC platforms, so that ultimately, the
+network device drivers for those platforms could be converted to use
+of_phy_is_fixed_link() and of_phy_register_fixed_link() instead of
+of_phy_connect_fixed_link(), while keeping compatibility with their
+respective Device Tree bindings.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Tested-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/net/fixed-link.txt
+@@ -0,0 +1,30 @@
++Fixed link Device Tree binding
++------------------------------
++
++Some Ethernet MACs have a "fixed link", and are not connected to a
++normal MDIO-managed PHY device. For those situations, a Device Tree
++binding allows to describe a "fixed link".
++
++Such a fixed link situation is described by creating a 'fixed-link'
++sub-node of the Ethernet MAC device node, with the following
++properties:
++
++* 'speed' (integer, mandatory), to indicate the link speed. Accepted
++ values are 10, 100 and 1000
++* 'full-duplex' (boolean, optional), to indicate that full duplex is
++ used. When absent, half duplex is assumed.
++* 'pause' (boolean, optional), to indicate that pause should be
++ enabled.
++* 'asym-pause' (boolean, optional), to indicate that asym_pause should
++ be enabled.
++
++Example:
++
++ethernet@0 {
++ ...
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ ...
++};
+--- a/drivers/of/of_mdio.c
++++ b/drivers/of/of_mdio.c
+@@ -14,6 +14,7 @@
+ #include <linux/netdevice.h>
+ #include <linux/err.h>
+ #include <linux/phy.h>
++#include <linux/phy_fixed.h>
+ #include <linux/of.h>
+ #include <linux/of_irq.h>
+ #include <linux/of_mdio.h>
+@@ -280,3 +281,69 @@ struct phy_device *of_phy_attach(struct
+ return phy_attach_direct(dev, phy, flags, iface) ? NULL : phy;
+ }
+ EXPORT_SYMBOL(of_phy_attach);
++
++#if defined(CONFIG_FIXED_PHY)
++/*
++ * of_phy_is_fixed_link() and of_phy_register_fixed_link() must
++ * support two DT bindings:
++ * - the old DT binding, where 'fixed-link' was a property with 5
++ * cells encoding various informations about the fixed PHY
++ * - the new DT binding, where 'fixed-link' is a sub-node of the
++ * Ethernet device.
++ */
++bool of_phy_is_fixed_link(struct device_node *np)
++{
++ struct device_node *dn;
++ int len;
++
++ /* New binding */
++ dn = of_get_child_by_name(np, "fixed-link");
++ if (dn) {
++ of_node_put(dn);
++ return true;
++ }
++
++ /* Old binding */
++ if (of_get_property(np, "fixed-link", &len) &&
++ len == (5 * sizeof(__be32)))
++ return true;
++
++ return false;
++}
++EXPORT_SYMBOL(of_phy_is_fixed_link);
++
++int of_phy_register_fixed_link(struct device_node *np)
++{
++ struct fixed_phy_status status = {};
++ struct device_node *fixed_link_node;
++ const __be32 *fixed_link_prop;
++ int len;
++
++ /* New binding */
++ fixed_link_node = of_get_child_by_name(np, "fixed-link");
++ if (fixed_link_node) {
++ status.link = 1;
++ status.duplex = of_property_read_bool(np, "full-duplex");
++ if (of_property_read_u32(fixed_link_node, "speed", &status.speed))
++ return -EINVAL;
++ status.pause = of_property_read_bool(np, "pause");
++ status.asym_pause = of_property_read_bool(np, "asym-pause");
++ of_node_put(fixed_link_node);
++ return fixed_phy_register(PHY_POLL, &status, np);
++ }
++
++ /* Old binding */
++ fixed_link_prop = of_get_property(np, "fixed-link", &len);
++ if (fixed_link_prop && len == (5 * sizeof(__be32))) {
++ status.link = 1;
++ status.duplex = be32_to_cpu(fixed_link_prop[1]);
++ status.speed = be32_to_cpu(fixed_link_prop[2]);
++ status.pause = be32_to_cpu(fixed_link_prop[3]);
++ status.asym_pause = be32_to_cpu(fixed_link_prop[4]);
++ return fixed_phy_register(PHY_POLL, &status, np);
++ }
++
++ return -ENODEV;
++}
++EXPORT_SYMBOL(of_phy_register_fixed_link);
++#endif
+--- a/include/linux/of_mdio.h
++++ b/include/linux/of_mdio.h
+@@ -67,4 +67,19 @@ static inline struct mii_bus *of_mdio_fi
+ }
+ #endif /* CONFIG_OF */
+
++#if defined(CONFIG_OF) && defined(CONFIG_FIXED_PHY)
++extern int of_phy_register_fixed_link(struct device_node *np);
++extern bool of_phy_is_fixed_link(struct device_node *np);
++#else
++static inline int of_phy_register_fixed_link(struct device_node *np)
++{
++ return -ENOSYS;
++}
++static inline bool of_phy_is_fixed_link(struct device_node *np)
++{
++ return false;
++}
++#endif
++
++
+ #endif /* __LINUX_OF_MDIO_H */
diff --git a/target/linux/mvebu/patches-3.14/021-mvneta_support_fixed_links.patch b/target/linux/mvebu/patches-3.14/021-mvneta_support_fixed_links.patch
new file mode 100644
index 0000000000..5df6757d68
--- /dev/null
+++ b/target/linux/mvebu/patches-3.14/021-mvneta_support_fixed_links.patch
@@ -0,0 +1,40 @@
+From 83895bedeee6fbf56d887af4280bf9edcc80da60 Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Date: Fri, 16 May 2014 16:14:06 +0200
+Subject: net: mvneta: add support for fixed links
+
+Following the introduction of of_phy_register_fixed_link(), this patch
+introduces fixed link support in the mvneta driver, for Marvell Armada
+370/XP SOCs.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -2808,9 +2808,22 @@ static int mvneta_probe(struct platform_
+
+ phy_node = of_parse_phandle(dn, "phy", 0);
+ if (!phy_node) {
+- dev_err(&pdev->dev, "no associated PHY\n");
+- err = -ENODEV;
+- goto err_free_irq;
++ if (!of_phy_is_fixed_link(dn)) {
++ dev_err(&pdev->dev, "no PHY specified\n");
++ err = -ENODEV;
++ goto err_free_irq;
++ }
++
++ err = of_phy_register_fixed_link(dn);
++ if (err < 0) {
++ dev_err(&pdev->dev, "cannot register fixed PHY\n");
++ goto err_free_irq;
++ }
++
++ /* In the case of a fixed PHY, the DT node associated
++ * to the PHY is the Ethernet MAC DT node.
++ */
++ phy_node = dn;
+ }
+
+ phy_mode = of_get_phy_mode(dn);