diff options
| author | Alexandros C. Couloumbis <alex@ozo.com> | 2010-10-08 12:10:18 +0000 |
|---|---|---|
| committer | Alexandros C. Couloumbis <alex@ozo.com> | 2010-10-08 12:10:18 +0000 |
| commit | ff0ca066b820c970c900187d960f89c0506ea9d5 (patch) | |
| tree | 059ad1fcf4d3fb24797ef02b4f4d92d5f74817a1 /target/linux | |
| parent | 03965bd6f312c14c35512aae8c0c1393ca662dbe (diff) | |
| download | upstream-ff0ca066b820c970c900187d960f89c0506ea9d5.tar.gz upstream-ff0ca066b820c970c900187d960f89c0506ea9d5.tar.bz2 upstream-ff0ca066b820c970c900187d960f89c0506ea9d5.zip | |
linux/ar71xx: add preliminary 2.6.36 kernel support (refresh patches)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23317 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux')
37 files changed, 1354 insertions, 0 deletions
diff --git a/target/linux/ar71xx/config-2.6.36 b/target/linux/ar71xx/config-2.6.36 new file mode 100644 index 0000000000..598dd3578c --- /dev/null +++ b/target/linux/ar71xx/config-2.6.36 @@ -0,0 +1,257 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_AG71XX=y +CONFIG_AG71XX_AR8216_SUPPORT=y +# CONFIG_AG71XX_DEBUG is not set +# CONFIG_AG71XX_DEBUG_FS is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_AR7 is not set +CONFIG_AR71XX_DEV_AP91_ETH=y +CONFIG_AR71XX_DEV_AP91_PCI=y +CONFIG_AR71XX_DEV_AP94_PCI=y +CONFIG_AR71XX_DEV_AR913X_WMAC=y +CONFIG_AR71XX_DEV_DSA=y +CONFIG_AR71XX_DEV_GPIO_BUTTONS=y +CONFIG_AR71XX_DEV_LEDS_GPIO=y +CONFIG_AR71XX_DEV_M25P80=y +CONFIG_AR71XX_DEV_PB42_PCI=y +CONFIG_AR71XX_DEV_PB9X_PCI=y +CONFIG_AR71XX_DEV_USB=y +CONFIG_AR71XX_MACH_AP81=y +CONFIG_AR71XX_MACH_AP83=y +CONFIG_AR71XX_MACH_AP96=y +CONFIG_AR71XX_MACH_AW_NR580=y +CONFIG_AR71XX_MACH_DIR_600_A1=y +CONFIG_AR71XX_MACH_DIR_615_C1=y +CONFIG_AR71XX_MACH_DIR_825_B1=y +CONFIG_AR71XX_MACH_EAP7660D=y +CONFIG_AR71XX_MACH_JWAP003=y +CONFIG_AR71XX_MACH_MZK_W04NU=y +CONFIG_AR71XX_MACH_MZK_W300NH=y +CONFIG_AR71XX_MACH_NBG460N=y +CONFIG_AR71XX_MACH_PB42=y +CONFIG_AR71XX_MACH_PB44=y +CONFIG_AR71XX_MACH_PB92=y +CONFIG_AR71XX_MACH_RB4XX=y +CONFIG_AR71XX_MACH_RB750=y +CONFIG_AR71XX_MACH_TEW_632BRP=y +CONFIG_AR71XX_MACH_TL_MR3420=y +CONFIG_AR71XX_MACH_TL_WA901ND=y +CONFIG_AR71XX_MACH_TL_WR1043ND=y +CONFIG_AR71XX_MACH_TL_WR741ND=y +CONFIG_AR71XX_MACH_TL_WR841N_V1=y +CONFIG_AR71XX_MACH_TL_WR941ND=y +CONFIG_AR71XX_MACH_UBNT=y +CONFIG_AR71XX_MACH_WNDR3700=y +CONFIG_AR71XX_MACH_WNR2000=y +CONFIG_AR71XX_MACH_WP543=y +CONFIG_AR71XX_MACH_WRT160NL=y +CONFIG_AR71XX_MACH_WRT400N=y +CONFIG_AR71XX_MACH_WZR_HP_G300NH=y +CONFIG_AR71XX_MACH_ZCN_1523H=y +CONFIG_AR71XX_NVRAM=y +CONFIG_AR71XX_PCI_ATH9K_FIXUP=y +CONFIG_AR71XX_WDT=y +CONFIG_AR8216_PHY=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ATHEROS_AR71XX=y +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set +CONFIG_BITREVERSE=y +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR2=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +CONFIG_CSRC_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +# CONFIG_FSNOTIFY is not set +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_NXP_74HC153=y +CONFIG_GPIO_PCF857X=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HW_HAS_PCI=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_GPIO=y +CONFIG_IMAGE_CMDLINE_HACK=y +# CONFIG_INITRAMFS_COMPRESSION_LZO is not set +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_SOURCE="../../root" +CONFIG_IRQ_CPU=y +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_RB750 is not set +# CONFIG_LEDS_WNDR3700_USB is not set +CONFIG_LOONGSON_UART_BASE=y +# CONFIG_M25PXX_USE_FAST_READ is not set +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_LOONGSON is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +CONFIG_MICREL_PHY=y +# CONFIG_MIKROTIK_RB532 is not set +CONFIG_MIPS=y +# CONFIG_MIPS_COBALT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_SIM is not set +CONFIG_MTD_AR91XX_FLASH=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_MYLOADER_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_WRT160NL_PARTS=y +CONFIG_MYLOADER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_AR7240=y +CONFIG_NET_DSA_MV88E6060=y +CONFIG_NET_DSA_MV88E6063=y +# CONFIG_NET_DSA_MV88E6123_61_65 is not set +# CONFIG_NET_DSA_MV88E6131 is not set +# CONFIG_NET_DSA_MV88E6XXX is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +# CONFIG_NET_DSA_TAG_DSA is not set +# CONFIG_NET_DSA_TAG_EDSA is not set +CONFIG_NET_DSA_TAG_QINQ=y +CONFIG_NET_DSA_TAG_TRAILER=y +# CONFIG_NO_IOPORT is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PHYLIB=y +CONFIG_MARVELL_PHY=y +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_POWERTV is not set +CONFIG_RTL8306_PHY=y +CONFIG_RTL8366RB_PHY=y +CONFIG_RTL8366S_PHY=y +CONFIG_RTL8366_SMI=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +# CONFIG_SCSI_DMA is not set +CONFIG_SCSI_MOD=y +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SPI=y +CONFIG_SPI_AP83=y +CONFIG_SPI_AR71XX=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_PB44=y +# CONFIG_SPI_RB4XX is not set +# CONFIG_SPI_RB4XX_CPLD is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_VSC7385 is not set +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +# CONFIG_TC35815 is not set +CONFIG_TRAD_SIGNALS=y +CONFIG_USB_SUPPORT=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar71xx/patches-2.6.36/001-ar71xx_core.patch b/target/linux/ar71xx/patches-2.6.36/001-ar71xx_core.patch new file mode 100644 index 0000000000..5a13dac3ac --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/001-ar71xx_core.patch @@ -0,0 +1,50 @@ +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -162,6 +162,13 @@ ifeq (,$(findstring march=octeon, $(cfla + cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon + endif + ++# ++# Atheros AR71xx ++# ++core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/ ++cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx ++load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000 ++ + cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) + cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) + cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -60,6 +60,23 @@ config AR7 + Support for the Texas Instruments AR7 System-on-a-Chip + family: TNETD7100, 7200 and 7300. + ++config ATHEROS_AR71XX ++ bool "Atheros AR71xx based boards" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select ARCH_REQUIRE_GPIOLIB ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_HAS_EARLY_PRINTK ++ select MIPS_MACHINE ++ help ++ Support for Atheros AR71xx based boards. ++ + config BCM47XX + bool "Broadcom BCM47XX based boards" + select CEVT_R4K +@@ -709,6 +726,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD + endchoice + + source "arch/mips/alchemy/Kconfig" ++source "arch/mips/ar71xx/Kconfig" + source "arch/mips/bcm63xx/Kconfig" + source "arch/mips/jazz/Kconfig" + source "arch/mips/jz4740/Kconfig" diff --git a/target/linux/ar71xx/patches-2.6.36/002-ar71xx_pci.patch b/target/linux/ar71xx/patches-2.6.36/002-ar71xx_pci.patch new file mode 100644 index 0000000000..3facce9d70 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/002-ar71xx_pci.patch @@ -0,0 +1,10 @@ +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o + obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o + obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ + ops-bcm63xx.o ++obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o + + # + # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/ar71xx/patches-2.6.36/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.36/003-ar71xx_usb_host.patch new file mode 100644 index 0000000000..9fea1b4b6c --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/003-ar71xx_usb_host.patch @@ -0,0 +1,58 @@ +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -112,6 +112,13 @@ config XPS_USB_HCD_XILINX + support both high speed and full speed devices, or high speed + devices only. + ++config USB_EHCI_AR71XX ++ bool "USB EHCI support for AR71xx" ++ depends on USB_EHCI_HCD && ATHEROS_AR71XX ++ default y ++ help ++ Support for Atheros AR71xx built-in EHCI controller ++ + config USB_EHCI_FSL + bool "Support for Freescale on-chip EHCI USB controller" + depends on USB_EHCI_HCD && FSL_SOC +@@ -225,6 +232,13 @@ config USB_OHCI_HCD_OMAP3 + Enables support for the on-chip OHCI controller on + OMAP3 and later chips. + ++config USB_OHCI_AR71XX ++ bool "USB OHCI support for Atheros AR71xx" ++ depends on USB_OHCI_HCD && ATHEROS_AR71XX ++ default y ++ help ++ Support for Atheros AR71xx built-in OHCI controller ++ + config USB_OHCI_HCD_PPC_SOC + bool "OHCI support for on-chip PPC USB controller" + depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -1197,6 +1197,11 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER ehci_atmel_driver + #endif + ++#ifdef CONFIG_USB_EHCI_AR71XX ++#include "ehci-ar71xx.c" ++#define PLATFORM_DRIVER ehci_ar71xx_driver ++#endif ++ + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ + !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ + !defined(XILINX_OF_PLATFORM_DRIVER) +--- a/drivers/usb/host/ohci-hcd.c ++++ b/drivers/usb/host/ohci-hcd.c +@@ -1100,6 +1100,11 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER ohci_hcd_jz4740_driver + #endif + ++#ifdef CONFIG_USB_OHCI_AR71XX ++#include "ohci-ar71xx.c" ++#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver ++#endif ++ + #if !defined(PCI_DRIVER) && \ + !defined(PLATFORM_DRIVER) && \ + !defined(OMAP1_PLATFORM_DRIVER) && \ diff --git a/target/linux/ar71xx/patches-2.6.36/004-ar71xx_spi_controller.patch b/target/linux/ar71xx/patches-2.6.36/004-ar71xx_spi_controller.patch new file mode 100644 index 0000000000..9c196e077e --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/004-ar71xx_spi_controller.patch @@ -0,0 +1,26 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -53,6 +53,13 @@ if SPI_MASTER + + comment "SPI Master Controller Drivers" + ++config SPI_AR71XX ++ tristate "Atheros AR71xx SPI Controller" ++ depends on SPI_MASTER && ATHEROS_AR71XX ++ select SPI_BITBANG ++ help ++ This is the SPI contoller driver for Atheros AR71xx. ++ + config SPI_ATMEL + tristate "Atmel SPI Controller" + depends on (ARCH_AT91 || AVR32) +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -11,6 +11,7 @@ endif + obj-$(CONFIG_SPI_MASTER) += spi.o + + # SPI master controller drivers (bus) ++obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o + obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o + obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o + obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o diff --git a/target/linux/ar71xx/patches-2.6.36/005-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-2.6.36/005-ar71xx_mac_driver.patch new file mode 100644 index 0000000000..01b7a2e143 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/005-ar71xx_mac_driver.patch @@ -0,0 +1,21 @@ +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -2045,6 +2045,8 @@ config ACENIC_OMIT_TIGON_I + + The safe and default value for this is N. + ++source drivers/net/ag71xx/Kconfig ++ + config DL2K + tristate "DL2000/TC902x-based Gigabit Ethernet support" + depends on PCI +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -109,6 +109,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/ + # end link order section + # + ++obj-$(CONFIG_AG71XX) += ag71xx/ + obj-$(CONFIG_SUNDANCE) += sundance.o + obj-$(CONFIG_HAMACHI) += hamachi.o + obj-$(CONFIG_NET) += Space.o loopback.o diff --git a/target/linux/ar71xx/patches-2.6.36/006-ar71xx_wdt_driver.patch b/target/linux/ar71xx/patches-2.6.36/006-ar71xx_wdt_driver.patch new file mode 100644 index 0000000000..bbdf382ef0 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/006-ar71xx_wdt_driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -916,6 +916,13 @@ config OCTEON_WDT + from the first interrupt, it is then only poked when the + device is written. + ++config AR71XX_WDT ++ tristate "Atheros AR71xx Watchdog Timer" ++ depends on ATHEROS_AR71XX ++ help ++ Hardware driver for the built-in watchdog timer on the Atheros ++ AR71xx SoCs. ++ + # PARISC Architecture + + # POWERPC Architecture +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -114,6 +114,7 @@ obj-$(CONFIG_INDYDOG) += indydog.o + obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o + obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o ++obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o + obj-$(CONFIG_TXX9_WDT) += txx9wdt.o + obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o diff --git a/target/linux/ar71xx/patches-2.6.36/007-ar91xx_flash_driver.patch b/target/linux/ar71xx/patches-2.6.36/007-ar91xx_flash_driver.patch new file mode 100644 index 0000000000..817f2ccb90 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/007-ar91xx_flash_driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/mtd/maps/Kconfig ++++ b/drivers/mtd/maps/Kconfig +@@ -251,6 +251,13 @@ config MTD_NETtel + help + Support for flash chips on NETtel/SecureEdge/SnapGear boards. + ++config MTD_AR91XX_FLASH ++ tristate "Atheros AR91xx parallel flash support" ++ depends on ATHEROS_AR71XX ++ select MTD_COMPLEX_MAPPINGS ++ help ++ Parallel flash driver for the Atheros AR91xx based boards. ++ + config MTD_DILNETPC + tristate "CFI Flash device mapped on DIL/Net PC" + depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN +--- a/drivers/mtd/maps/Makefile ++++ b/drivers/mtd/maps/Makefile +@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2 + obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o + obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o + obj-$(CONFIG_MTD_PCI) += pci.o ++obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o + obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o + obj-$(CONFIG_MTD_EDB7312) += edb7312.o + obj-$(CONFIG_MTD_IMPA7) += impa7.o diff --git a/target/linux/ar71xx/patches-2.6.36/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.36/101-ksz8041_phy_driver.patch new file mode 100644 index 0000000000..64418c9830 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/101-ksz8041_phy_driver.patch @@ -0,0 +1,24 @@ +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -119,6 +119,11 @@ config RTL8306_PHY + tristate "Driver for Realtek RTL8306S switches" + select SWCONFIG + ++config MICREL_PHY ++ tristate "Drivers for Micrel/Kendin PHYs" ++ ---help--- ++ Currently has a driver for the KSZ8041 ++ + config FIXED_PHY + bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" + depends on PHYLIB=y +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi + obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o + obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o + obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o ++obj-$(CONFIG_MICREL) += micrel.o + obj-$(CONFIG_FIXED_PHY) += fixed.o + obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o + obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/ar71xx/patches-2.6.36/102-mtd_m25p80_add_myloader_parser.patch b/target/linux/ar71xx/patches-2.6.36/102-mtd_m25p80_add_myloader_parser.patch new file mode 100644 index 0000000000..dcf7a6deff --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/102-mtd_m25p80_add_myloader_parser.patch @@ -0,0 +1,19 @@ +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -933,6 +933,16 @@ static int __devinit m25p_probe(struct s + part_probes, &parts, 0); + } + ++#ifdef CONFIG_MTD_MYLOADER_PARTS ++ if (nr_parts <= 0) { ++ static const char *part_probes[] ++ = { "MyLoader", NULL, }; ++ ++ nr_parts = parse_mtd_partitions(&flash->mtd, ++ part_probes, &parts, 0); ++ } ++#endif ++ + if (nr_parts <= 0 && data && data->parts) { + parts = data->parts; + nr_parts = data->nr_parts; diff --git a/target/linux/ar71xx/patches-2.6.36/104-mtd_m25p80_add_redboot_parser.patch b/target/linux/ar71xx/patches-2.6.36/104-mtd_m25p80_add_redboot_parser.patch new file mode 100644 index 0000000000..bb0ff7d3f8 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/104-mtd_m25p80_add_redboot_parser.patch @@ -0,0 +1,18 @@ +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -943,6 +943,15 @@ static int __devinit m25p_probe(struct s + } + #endif + ++#ifdef CONFIG_MTD_REDBOOT_PARTS ++ if (nr_parts <= 0) { ++ static const char *part_probes[] ++ = { "RedBoot", NULL, }; ++ ++ nr_parts = parse_mtd_partitions(&flash->mtd, ++ part_probes, &parts, 0); ++ } ++#endif + if (nr_parts <= 0 && data && data->parts) { + parts = data->parts; + nr_parts = data->nr_parts; diff --git a/target/linux/ar71xx/patches-2.6.36/107-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-2.6.36/107-mtd-SST39VF6401B-support.patch new file mode 100644 index 0000000000..246abd5dc0 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/107-mtd-SST39VF6401B-support.patch @@ -0,0 +1,29 @@ +--- a/drivers/mtd/chips/jedec_probe.c ++++ b/drivers/mtd/chips/jedec_probe.c +@@ -148,6 +148,7 @@ + #define SST39LF160 0x2782 + #define SST39VF1601 0x234b + #define SST39VF3201 0x235b ++#define SST39VF6401B 0x236d + #define SST39WF1601 0x274b + #define SST39WF1602 0x274a + #define SST39LF512 0x00D4 +@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec + ERASEINFO(0x10000,64), + } + }, { ++ .mfr_id = CFI_MFR_SST, ++ .dev_id = SST39VF6401B, ++ .name = "SST 39VF6401B", ++ .devtypes = CFI_DEVICETYPE_X16, ++ .uaddr = MTD_UADDR_0xAAAA_0x5555, ++ .dev_size = SIZE_8MiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x10000,128) ++ } ++ }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M29F800AB, + .name = "ST M29F800AB", diff --git a/target/linux/ar71xx/patches-2.6.36/108-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-2.6.36/108-mtd_fix_cfi_cmdset_0002_status_check.patch new file mode 100644 index 0000000000..ebb3b1ddf2 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/108-mtd_fix_cfi_cmdset_0002_status_check.patch @@ -0,0 +1,69 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -1190,8 +1190,8 @@ static int __xipram do_write_oneword(str + break; + } + +- if (chip_ready(map, adr)) +- break; ++ if (chip_good(map, adr, datum)) ++ goto enable_xip; + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1); +@@ -1207,6 +1207,8 @@ static int __xipram do_write_oneword(str + + ret = -EIO; + } ++ ++ enable_xip: + xip_enable(map, chip, adr); + op_done: + chip->state = FL_READY; +@@ -1553,7 +1555,6 @@ static int cfi_amdstd_write_buffers(stru + return 0; + } + +- + /* + * Handle devices with one erase region, that only implement + * the chip erase command. +@@ -1617,8 +1618,8 @@ static int __xipram do_erase_chip(struct + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) +- break; ++ if (chip_good(map, adr, map_word_ff(map))) ++ goto op_done; + + if (time_after(jiffies, timeo)) { + printk(KERN_WARNING "MTD %s(): software timeout\n", +@@ -1638,6 +1639,7 @@ static int __xipram do_erase_chip(struct + ret = -EIO; + } + ++ op_done: + chip->state = FL_READY; + xip_enable(map, chip, adr); + put_chip(map, chip, adr); +@@ -1705,9 +1707,9 @@ static int __xipram do_erase_oneblock(st + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) { ++ if (chip_good(map, adr, map_word_ff(map))) { + xip_enable(map, chip, adr); +- break; ++ goto op_done; + } + + if (time_after(jiffies, timeo)) { +@@ -1729,6 +1731,7 @@ static int __xipram do_erase_oneblock(st + ret = -EIO; + } + ++ op_done: + chip->state = FL_READY; + put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); diff --git a/target/linux/ar71xx/patches-2.6.36/109-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-2.6.36/109-mtd-wrt160nl-trx-parser.patch new file mode 100644 index 0000000000..c8012f57d6 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/109-mtd-wrt160nl-trx-parser.patch @@ -0,0 +1,44 @@ +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -952,6 +952,16 @@ static int __devinit m25p_probe(struct s + part_probes, &parts, 0); + } + #endif ++ ++#ifdef CONFIG_MTD_WRT160NL_PARTS ++ if (nr_parts <= 0) { ++ static const char *part_probes[] ++ = { "wrt160nl", NULL, }; ++ ++ nr_parts = parse_mtd_partitions(&flash->mtd, ++ part_probes, &parts, 0); ++ } ++#endif + if (nr_parts <= 0 && data && data->parts) { + parts = data->parts; + nr_parts = data->nr_parts; +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -181,6 +181,12 @@ config MTD_AR7_PARTS + ---help--- + TI AR7 partitioning support + ++config MTD_WRT160NL_PARTS ++ tristate "Linksys WRT160NL partitioning support" ++ depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL ++ ---help--- ++ Linksys WRT160NL partitioning support ++ + config MTD_MYLOADER_PARTS + tristate "MyLoader partition parsing" + depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX) +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o + obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o ++obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o + obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o + diff --git a/target/linux/ar71xx/patches-2.6.36/110-usb-ehci-add-war-for-synopsys-hc-bug.patch b/target/linux/ar71xx/patches-2.6.36/110-usb-ehci-add-war-for-synopsys-hc-bug.patch new file mode 100644 index 0000000000..047239d5cc --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/110-usb-ehci-add-war-for-synopsys-hc-bug.patch @@ -0,0 +1,22 @@ +--- a/drivers/usb/host/ehci-q.c ++++ b/drivers/usb/host/ehci-q.c +@@ -1193,6 +1193,9 @@ static void end_unlink_async (struct ehc + ehci->reclaim = NULL; + start_unlink_async (ehci, next); + } ++ ++ if (ehci->has_synopsys_hc_bug) ++ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next); + } + + /* makes sure the async qh will become idle */ +--- a/drivers/usb/host/ehci.h ++++ b/drivers/usb/host/ehci.h +@@ -131,6 +131,7 @@ struct ehci_hcd { /* one per controlle + unsigned need_io_watchdog:1; + unsigned broken_periodic:1; + unsigned fs_i_thresh:1; /* Intel iso scheduling */ ++ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ + + /* required for usb32 quirk */ + #define OHCI_CTRL_HCFS (3 << 6) diff --git a/target/linux/ar71xx/patches-2.6.36/111-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-2.6.36/111-mtd-cfi_cmdset_0002-force-word-write.patch new file mode 100644 index 0000000000..73800738fe --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/111-mtd-cfi_cmdset_0002-force-word-write.patch @@ -0,0 +1,61 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -39,7 +39,7 @@ + #include <linux/mtd/xip.h> + + #define AMD_BOOTLOC_BUG +-#define FORCE_WORD_WRITE 0 ++#define FORCE_WORD_WRITE 1 + + #define MAX_WORD_RETRIES 3 + +@@ -50,7 +50,9 @@ + + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#if !FORCE_WORD_WRITE + static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#endif + static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); + static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); + static void cfi_amdstd_sync (struct mtd_info *); +@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m + } + #endif + ++#if !FORCE_WORD_WRITE + static void fixup_use_write_buffers(struct mtd_info *mtd, void *param) + { + struct map_info *map = mtd->priv; +@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru + mtd->write = cfi_amdstd_write_buffers; + } + } ++#endif /* !FORCE_WORD_WRITE */ + + /* Atmel chips don't use the same PRI format as AMD chips */ + static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) +@@ -1364,6 +1368,7 @@ static int cfi_amdstd_write_words(struct + /* + * FIXME: interleaved mode not tested, and probably not supported! + */ ++#if !FORCE_WORD_WRITE + static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, + unsigned long adr, const u_char *buf, + int len) +@@ -1475,7 +1480,6 @@ static int __xipram do_write_buffer(stru + return ret; + } + +- + static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) + { +@@ -1554,6 +1558,7 @@ static int cfi_amdstd_write_buffers(stru + + return 0; + } ++#endif /* !FORCE_WORD_WRITE */ + + /* + * Handle devices with one erase region, that only implement diff --git a/target/linux/ar71xx/patches-2.6.36/120-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-2.6.36/120-dsa-trailer-tag-validation-fix.patch new file mode 100644 index 0000000000..3e3902bac0 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/120-dsa-trailer-tag-validation-fix.patch @@ -0,0 +1,11 @@ +--- a/net/dsa/tag_trailer.c ++++ b/net/dsa/tag_trailer.c +@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s + + trailer = skb_tail_pointer(skb) - 4; + if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 || +- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00) ++ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00) + goto out_drop; + + source_port = trailer[1] & 7; diff --git a/target/linux/ar71xx/patches-2.6.36/121-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-2.6.36/121-dsa-add-88e6063-driver.patch new file mode 100644 index 0000000000..1a11a69c6f --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/121-dsa-add-88e6063-driver.patch @@ -0,0 +1,26 @@ +--- a/net/dsa/Kconfig ++++ b/net/dsa/Kconfig +@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060 + This enables support for the Marvell 88E6060 ethernet switch + chip. + ++config NET_DSA_MV88E6063 ++ bool "Marvell 88E6063 ethernet switch chip support" ++ select NET_DSA_TAG_TRAILER ++ ---help--- ++ This enables support for the Marvell 88E6063 ethernet switch ++ chip ++ + config NET_DSA_MV88E6XXX_NEED_PPU + bool + default n +--- a/net/dsa/Makefile ++++ b/net/dsa/Makefile +@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag + # switch drivers + obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o + obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o ++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o + obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o + obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o + diff --git a/target/linux/ar71xx/patches-2.6.36/122-dsa-add-qinq-tagging-format.patch b/target/linux/ar71xx/patches-2.6.36/122-dsa-add-qinq-tagging-format.patch new file mode 100644 index 0000000000..ee3713bf8e --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/122-dsa-add-qinq-tagging-format.patch @@ -0,0 +1,79 @@ +--- a/include/linux/if_ether.h ++++ b/include/linux/if_ether.h +@@ -81,6 +81,7 @@ + #define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ + #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ + #define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ ++#define ETH_P_QINQ 0x9100 /* QinQ VLAN Stacking Protocol */ + #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ + + /* +--- a/net/dsa/dsa_priv.h ++++ b/net/dsa/dsa_priv.h +@@ -174,6 +174,9 @@ netdev_tx_t dsa_xmit(struct sk_buff *skb + /* tag_edsa.c */ + netdev_tx_t edsa_xmit(struct sk_buff *skb, struct net_device *dev); + ++/* tag_qinq.c */ ++netdev_tx_t qinq_xmit(struct sk_buff *skb, struct net_device *dev); ++ + /* tag_trailer.c */ + netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev); + +--- a/net/dsa/Kconfig ++++ b/net/dsa/Kconfig +@@ -23,6 +23,10 @@ config NET_DSA_TAG_TRAILER + bool + default n + ++config NET_DSA_TAG_QINQ ++ bool ++ default y ++ + + # switch drivers + config NET_DSA_MV88E6XXX +--- a/net/dsa/Makefile ++++ b/net/dsa/Makefile +@@ -1,6 +1,7 @@ + # tagging formats + obj-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o + obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o ++obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qinq.o + obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o + + # switch drivers +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -320,6 +320,19 @@ static const struct net_device_ops edsa_ + .ndo_do_ioctl = dsa_slave_ioctl, + }; + #endif ++#ifdef CONFIG_NET_DSA_TAG_QINQ ++static const struct net_device_ops qinq_netdev_ops = { ++ .ndo_init = dsa_slave_init, ++ .ndo_open = dsa_slave_open, ++ .ndo_stop = dsa_slave_close, ++ .ndo_start_xmit = qinq_xmit, ++ .ndo_change_rx_flags = dsa_slave_change_rx_flags, ++ .ndo_set_rx_mode = dsa_slave_set_rx_mode, ++ .ndo_set_multicast_list = dsa_slave_set_rx_mode, ++ .ndo_set_mac_address = dsa_slave_set_mac_address, ++ .ndo_do_ioctl = dsa_slave_ioctl, ++}; ++#endif + #ifdef CONFIG_NET_DSA_TAG_TRAILER + static const struct net_device_ops trailer_netdev_ops = { + .ndo_init = dsa_slave_init, +@@ -365,6 +378,11 @@ dsa_slave_create(struct dsa_switch *ds, + slave_dev->netdev_ops = &edsa_netdev_ops; + break; + #endif ++#ifdef CONFIG_NET_DSA_TAG_QINQ ++ case htons(ETH_P_QINQ): ++ slave_dev->netdev_ops = &qinq_netdev_ops; ++ break; ++#endif + #ifdef CONFIG_NET_DSA_TAG_TRAILER + case htons(ETH_P_TRAILER): + slave_dev->netdev_ops = &trailer_netdev_ops; diff --git a/target/linux/ar71xx/patches-2.6.36/123-dsa-add-ar7240-built-in-switch-support.patch b/target/linux/ar71xx/patches-2.6.36/123-dsa-add-ar7240-built-in-switch-support.patch new file mode 100644 index 0000000000..50e6e5de27 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/123-dsa-add-ar7240-built-in-switch-support.patch @@ -0,0 +1,28 @@ +--- a/net/dsa/Kconfig ++++ b/net/dsa/Kconfig +@@ -29,6 +29,15 @@ config NET_DSA_TAG_QINQ + + + # switch drivers ++config NET_DSA_AR7240 ++ bool "Atheros AR7240 built-in ethernet switch support" ++ depends on ATHEROS_AR71XX ++ default n ++ select NET_DSA_TAG_QINQ ++ ---help--- ++ This enables support for the built-in ethernet switch of the ++ Atheros AR7240 SoC. ++ + config NET_DSA_MV88E6XXX + bool + default n +--- a/net/dsa/Makefile ++++ b/net/dsa/Makefile +@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qi + obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o + + # switch drivers ++obj-$(CONFIG_NET_DSA_AR7240) += ar7240.o + obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o + obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o + obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o diff --git a/target/linux/ar71xx/patches-2.6.36/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.36/140-redboot_partition_scan.patch new file mode 100644 index 0000000000..a09271a069 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/140-redboot_partition_scan.patch @@ -0,0 +1,54 @@ +--- a/drivers/mtd/redboot.c ++++ b/drivers/mtd/redboot.c +@@ -78,31 +78,32 @@ static int parse_redboot_partitions(stru + static char nullstring[] = "unallocated"; + #endif + ++ buf = vmalloc(master->erasesize); ++ if (!buf) ++ return -ENOMEM; ++ ++ restart: + if ( directory < 0 ) { + offset = master->size + directory * master->erasesize; +- while (master->block_isbad && ++ while (master->block_isbad && + master->block_isbad(master, offset)) { + if (!offset) { + nogood: + printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); ++ vfree(buf); + return -EIO; + } + offset -= master->erasesize; + } + } else { + offset = directory * master->erasesize; +- while (master->block_isbad && ++ while (master->block_isbad && + master->block_isbad(master, offset)) { + offset += master->erasesize; + if (offset == master->size) + goto nogood; + } + } +- buf = vmalloc(master->erasesize); +- +- if (!buf) +- return -ENOMEM; +- + printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", + master->name, offset); + +@@ -174,6 +175,11 @@ static int parse_redboot_partitions(stru + } + if (i == numslots) { + /* Didn't find it */ ++ if (offset + master->erasesize < master->size) { ++ /* not at the end of the flash yet, maybe next block :) */ ++ directory++; ++ goto restart; ++ } + printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", + master->name); + ret = 0; diff --git a/target/linux/ar71xx/patches-2.6.36/150-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-2.6.36/150-drivers-link-spi-before-mtd.patch new file mode 100644 index 0000000000..eb922dd431 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/150-drivers-link-spi-before-mtd.patch @@ -0,0 +1,12 @@ +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -45,8 +45,8 @@ obj-y += macintosh/ + obj-$(CONFIG_IDE) += ide/ + obj-$(CONFIG_SCSI) += scsi/ + obj-$(CONFIG_ATA) += ata/ +-obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPI) += spi/ ++obj-$(CONFIG_MTD) += mtd/ + obj-y += net/ + obj-$(CONFIG_ATM) += atm/ + obj-$(CONFIG_FUSION) += message/ diff --git a/target/linux/ar71xx/patches-2.6.36/151-spi-add-various-flags.patch b/target/linux/ar71xx/patches-2.6.36/151-spi-add-various-flags.patch new file mode 100644 index 0000000000..b72fd51941 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/151-spi-add-various-flags.patch @@ -0,0 +1,19 @@ +--- a/include/linux/spi/spi.h ++++ b/include/linux/spi/spi.h +@@ -438,6 +438,8 @@ struct spi_transfer { + dma_addr_t rx_dma; + + unsigned cs_change:1; ++ unsigned verify:1; ++ unsigned fast_write:1; + u8 bits_per_word; + u16 delay_usecs; + u32 speed_hz; +@@ -479,6 +481,7 @@ struct spi_message { + struct spi_device *spi; + + unsigned is_dma_mapped:1; ++ unsigned fast_read:1; + + /* REVISIT: we might want a flag affecting the behavior of the + * last transfer ... allowing things like "read 16 bit length L" diff --git a/target/linux/ar71xx/patches-2.6.36/152-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-2.6.36/152-rb4xx-spi-driver.patch new file mode 100644 index 0000000000..1a59b44387 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/152-rb4xx-spi-driver.patch @@ -0,0 +1,25 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -259,6 +259,12 @@ config SPI_PXA2XX + The driver can be configured to use any SSP port and additional + documentation can be found a Documentation/spi/pxa2xx. + ++config SPI_RB4XX ++ tristate "Mikrotik RB4XX SPI master" ++ depends on SPI_MASTER && AR71XX_MACH_RB4XX ++ help ++ SPI controller driver for the Mikrotik RB4xx series boards. ++ + config SPI_S3C24XX + tristate "Samsung S3C24XX series SPI" + depends on ARCH_S3C2410 && EXPERIMENTAL +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -49,6 +49,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci. + obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o + obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o + obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o ++obj-$(CONFIG_SPI_RB4XX) += rb4xx_spi.o + + # special build for s3c24xx spi driver with fiq support + spi_s3c24xx_hw-y := spi_s3c24xx.o diff --git a/target/linux/ar71xx/patches-2.6.36/153-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-2.6.36/153-spi-rb4xx-cpld-driver.patch new file mode 100644 index 0000000000..435effdfec --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/153-spi-rb4xx-cpld-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -401,6 +401,13 @@ config SPI_TLE62X0 + sysfs interface, with each line presented as a kind of GPIO + exposing both switch control and diagnostic feedback. + ++config SPI_RB4XX_CPLD ++ tristate "MikroTik RB4XX CPLD driver" ++ depends on AR71XX_MACH_RB4XX ++ help ++ SPI driver for the Xilinx CPLD chip present on the ++ MikroTik RB4xx boards. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -58,6 +58,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) + # ... add above this line ... + + # SPI protocol drivers (device/link on bus) ++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o + obj-$(CONFIG_SPI_SPIDEV) += spidev.o + obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o + # ... add above this line ... diff --git a/target/linux/ar71xx/patches-2.6.36/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.36/200-rb4xx_nand_driver.patch new file mode 100644 index 0000000000..4bf1193887 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/200-rb4xx_nand_driver.patch @@ -0,0 +1,21 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -531,4 +531,8 @@ config MTD_NAND_JZ4740 + help + Enables support for NAND Flash on JZ4740 SoC based boards. + ++config MTD_NAND_RB4XX ++ tristate "NAND flash driver for RouterBoard 4xx series" ++ depends on MTD_NAND && AR71XX_MACH_RB4XX ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27 + obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o + obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o ++obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o + obj-$(CONFIG_MTD_ALAUDA) += alauda.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-2.6.36/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.36/201-ap83_spi_controller.patch new file mode 100644 index 0000000000..32f9f0d5f2 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/201-ap83_spi_controller.patch @@ -0,0 +1,62 @@ +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -11,6 +11,7 @@ endif + obj-$(CONFIG_SPI_MASTER) += spi.o + + # SPI master controller drivers (bus) ++obj-$(CONFIG_SPI_AP83) += ap83_spi.o + obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o + obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o + obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -53,6 +53,14 @@ if SPI_MASTER + + comment "SPI Master Controller Drivers" + ++config SPI_AP83 ++ tristate "Atheros AP83 specific SPI Controller" ++ depends on SPI_MASTER && AR71XX_MACH_AP83 ++ select SPI_BITBANG ++ help ++ This is a specific SPI controller driver for the Atheros AP83 ++ reference board. ++ + config SPI_AR71XX + tristate "Atheros AR71xx SPI Controller" + depends on SPI_MASTER && ATHEROS_AR71XX +--- a/drivers/spi/ap83_spi.c ++++ b/drivers/spi/ap83_spi.c +@@ -132,28 +132,28 @@ static u32 ap83_spi_txrx_mode0(struct sp + unsigned nsecs, u32 word, u8 bits) + { + dev_dbg(&spi->dev, "TXRX0 word=%08x, bits=%u\n", word, bits); +- return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); ++ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); + } + + static u32 ap83_spi_txrx_mode1(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) + { + dev_dbg(&spi->dev, "TXRX1 word=%08x, bits=%u\n", word, bits); +- return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits); ++ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); + } + + static u32 ap83_spi_txrx_mode2(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) + { + dev_dbg(&spi->dev, "TXRX2 word=%08x, bits=%u\n", word, bits); +- return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits); ++ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); + } + + static u32 ap83_spi_txrx_mode3(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) + { + dev_dbg(&spi->dev, "TXRX3 word=%08x, bits=%u\n", word, bits); +- return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits); ++ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); + } + + static int ap83_spi_probe(struct platform_device *pdev) diff --git a/target/linux/ar71xx/patches-2.6.36/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.36/202-spi_vsc7385_driver.patch new file mode 100644 index 0000000000..46fe39331a --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/202-spi_vsc7385_driver.patch @@ -0,0 +1,24 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -416,6 +416,11 @@ config SPI_RB4XX_CPLD + SPI driver for the Xilinx CPLD chip present on the + MikroTik RB4xx boards. + ++config SPI_VSC7385 ++ tristate "Vitesse VSC7385 ethernet switch driver" ++ help ++ SPI driver for the Vitesse VSC7385 ethernet switch. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -61,6 +61,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) + # SPI protocol drivers (device/link on bus) + obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o + obj-$(CONFIG_SPI_SPIDEV) += spidev.o ++obj-$(CONFIG_SPI_VSC7385) += spi_vsc7385.o + obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o + # ... add above this line ... + diff --git a/target/linux/ar71xx/patches-2.6.36/203-pb44_spi_controller.patch b/target/linux/ar71xx/patches-2.6.36/203-pb44_spi_controller.patch new file mode 100644 index 0000000000..9107187984 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/203-pb44_spi_controller.patch @@ -0,0 +1,27 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -68,6 +68,14 @@ config SPI_AR71XX + help + This is the SPI contoller driver for Atheros AR71xx. + ++config SPI_PB44 ++ tristate "Atheros PB44 board specific SPI controller" ++ depends on SPI_MASTER && AR71XX_MACH_PB44 ++ select SPI_BITBANG ++ help ++ This is a specific SPI controller driver for the Atheros PB44 ++ reference board. ++ + config SPI_ATMEL + tristate "Atmel SPI Controller" + depends on (ARCH_AT91 || AVR32) +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -28,6 +28,7 @@ obj-$(CONFIG_SPI_GPIO) += spi_gpio.o + obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o + obj-$(CONFIG_SPI_IMX) += spi_imx.o + obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o ++obj-$(CONFIG_SPI_PB44) += pb44_spi.o + obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o + obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o + obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o diff --git a/target/linux/ar71xx/patches-2.6.36/205-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-2.6.36/205-wndr3700-usb-led-driver.patch new file mode 100644 index 0000000000..27b0d507ff --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/205-wndr3700-usb-led-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -320,6 +320,13 @@ config LEDS_TRIGGERS + + if LEDS_TRIGGERS + ++config LEDS_WNDR3700_USB ++ tristate "NETGEAR WNDR3700 USB LED driver" ++ depends on LEDS_CLASS && AR71XX_MACH_WNDR3700 ++ help ++ This option enables support for the USB LED found on the ++ NETGEAR WNDR3700 board. ++ + comment "LED Triggers" + + config LEDS_TRIGGER_TIMER +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -31,6 +31,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903 + obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o + obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o + obj-$(CONFIG_LEDS_PWM) += leds-pwm.o ++obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o + obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o + obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o + obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o diff --git a/target/linux/ar71xx/patches-2.6.36/206-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-2.6.36/206-nxp-74hc153-gpio-chip-driver.patch new file mode 100644 index 0000000000..c2d097616f --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/206-nxp-74hc153-gpio-chip-driver.patch @@ -0,0 +1,25 @@ +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -361,4 +361,12 @@ config GPIO_JANZ_TTL + This driver provides support for driving the pins in output + mode only. Input mode is not supported. + ++comment "Other GPIO expanders" ++ ++config GPIO_NXP_74HC153 ++ tristate "NXP 74HC153 Dual 4-input multiplexer" ++ help ++ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This ++ provides a GPIO interface supporting inputs. ++ + endif +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_MAX7301) += max7301.o + obj-$(CONFIG_GPIO_MAX732X) += max732x.o + obj-$(CONFIG_GPIO_MC33880) += mc33880.o + obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o ++obj-$(CONFIG_GPIO_NXP_74HC153) += nxp_74hc153.o + obj-$(CONFIG_GPIO_PCA953X) += pca953x.o + obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o + obj-$(CONFIG_GPIO_PL061) += pl061.o diff --git a/target/linux/ar71xx/patches-2.6.36/207-rb750-led-driver.patch b/target/linux/ar71xx/patches-2.6.36/207-rb750-led-driver.patch new file mode 100644 index 0000000000..9e4ba2cd1c --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/207-rb750-led-driver.patch @@ -0,0 +1,23 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -327,6 +327,10 @@ config LEDS_WNDR3700_USB + This option enables support for the USB LED found on the + NETGEAR WNDR3700 board. + ++config LEDS_RB750 ++ tristate "LED driver for the Mikrotik RouterBOARD 750" ++ depends on LEDS_CLASS && AR71XX_MACH_RB750 ++ + comment "LED Triggers" + + config LEDS_TRIGGER_TIMER +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -38,6 +38,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359 + obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o + obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o + obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o ++obj-$(CONFIG_LEDS_RB750) += leds-rb750.o + obj-$(CONFIG_LEDS_NS2) += leds-ns2.o + + # LED SPI Drivers diff --git a/target/linux/ar71xx/patches-2.6.36/208-rb750-nand-driver.patch b/target/linux/ar71xx/patches-2.6.36/208-rb750-nand-driver.patch new file mode 100644 index 0000000000..cfc8c3626b --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/208-rb750-nand-driver.patch @@ -0,0 +1,21 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -535,4 +535,8 @@ config MTD_NAND_RB4XX + tristate "NAND flash driver for RouterBoard 4xx series" + depends on MTD_NAND && AR71XX_MACH_RB4XX + ++config MTD_NAND_RB750 ++ tristate "NAND flash driver for the RouterBoard 750" ++ depends on MTD_NAND && AR71XX_MACH_RB750 ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx + obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o + obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o ++obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o + obj-$(CONFIG_MTD_ALAUDA) += alauda.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-2.6.36/210-spi_bitbang_txrx.patch b/target/linux/ar71xx/patches-2.6.36/210-spi_bitbang_txrx.patch new file mode 100644 index 0000000000..d4b8ecba4c --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/210-spi_bitbang_txrx.patch @@ -0,0 +1,12 @@ +--- a/drivers/spi/ap83_spi.c ++++ b/drivers/spi/ap83_spi.c +@@ -125,8 +125,8 @@ static void ap83_spi_chipselect(struct s + do_spidelay(spi, nsecs); \ + } while (0) + +-#define EXPAND_BITBANG_TXRX + #include <linux/spi/spi_bitbang.h> ++#include "spi_bitbang_txrx.h" + + static u32 ap83_spi_txrx_mode0(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) diff --git a/target/linux/ar71xx/patches-2.6.36/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.36/300-mips_fw_myloader.patch new file mode 100644 index 0000000000..772cfb7a50 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/300-mips_fw_myloader.patch @@ -0,0 +1,22 @@ +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -185,6 +185,7 @@ endif + # + libs-$(CONFIG_ARC) += arch/mips/fw/arc/ + libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ ++libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ + libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ + libs-y += arch/mips/fw/lib/ + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -901,6 +901,9 @@ config MIPS_NILE4 + config MIPS_DISABLE_OBSOLETE_IDE + bool + ++config MYLOADER ++ bool ++ + config SYNC_R4K + bool + diff --git a/target/linux/ar71xx/patches-2.6.36/400-2.6.35-fix-nand_scan_ident-options.patch b/target/linux/ar71xx/patches-2.6.36/400-2.6.35-fix-nand_scan_ident-options.patch new file mode 100644 index 0000000000..dfaad1e0e7 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/400-2.6.35-fix-nand_scan_ident-options.patch @@ -0,0 +1,22 @@ +--- a/drivers/mtd/nand/rb4xx_nand.c ++++ b/drivers/mtd/nand/rb4xx_nand.c +@@ -218,7 +218,7 @@ static int __init rb4xx_nand_probe(struc + + platform_set_drvdata(pdev, info); + +- ret = nand_scan_ident(&info->mtd, 1); ++ ret = nand_scan_ident(&info->mtd, 1, NULL); + if (ret) { + ret = -ENXIO; + goto err_free_info; +--- a/drivers/mtd/nand/rb750_nand.c ++++ b/drivers/mtd/nand/rb750_nand.c +@@ -287,7 +287,7 @@ static int __init rb750_nand_probe(struc + + platform_set_drvdata(pdev, info); + +- ret = nand_scan_ident(&info->mtd, 1); ++ ret = nand_scan_ident(&info->mtd, 1, NULL); + if (ret) { + ret = -ENXIO; + goto err_free_info; diff --git a/target/linux/ar71xx/patches-2.6.36/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.36/901-get_c0_compare_irq_function.patch new file mode 100644 index 0000000000..3c09a78c11 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.36/901-get_c0_compare_irq_function.patch @@ -0,0 +1,29 @@ +--- a/arch/mips/kernel/traps.c ++++ b/arch/mips/kernel/traps.c +@@ -53,6 +53,7 @@ + #include <asm/stacktrace.h> + #include <asm/irq.h> + #include <asm/uasm.h> ++#include <asm/time.h> + + extern void check_wait(void); + extern asmlinkage void r4k_wait(void); +@@ -1539,6 +1540,8 @@ void __cpuinit per_cpu_trap_init(void) + if (cpu_has_mips_r2) { + cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; + cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; ++ if (get_c0_compare_irq) ++ cp0_compare_irq = get_c0_compare_irq(); + cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; + if (cp0_perfcount_irq == cp0_compare_irq) + cp0_perfcount_irq = -1; +--- a/arch/mips/include/asm/time.h ++++ b/arch/mips/include/asm/time.h +@@ -52,6 +52,7 @@ extern int (*perf_irq)(void); + */ + #ifdef CONFIG_CEVT_R4K_LIB + extern unsigned int __weak get_c0_compare_int(void); ++extern unsigned int __weak get_c0_compare_irq(void); + extern int r4k_clockevent_init(void); + #endif + |