aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorJohn Crispin <blogic@openwrt.org>2014-11-26 09:00:08 +0000
committerJohn Crispin <blogic@openwrt.org>2014-11-26 09:00:08 +0000
commit7d4dfd7dd7ce1ac02d84ad7482e3f7d168d61ec9 (patch)
tree24af078d708bfb6b3027ff4064114d439e4213e1 /target/linux
parent2088d1ea438e14be13e9d579ebf847f9cc50245d (diff)
downloadupstream-7d4dfd7dd7ce1ac02d84ad7482e3f7d168d61ec9.tar.gz
upstream-7d4dfd7dd7ce1ac02d84ad7482e3f7d168d61ec9.tar.bz2
upstream-7d4dfd7dd7ce1ac02d84ad7482e3f7d168d61ec9.zip
add new target 'oxnas'
This is the oxnas target previously developed at http://gitorious.org/openwrt-oxnas Basically, this consolidates the changes and addtionas from http://github.org/kref/linux-oxnas into a new OpenWrt hardware target 'oxnas' adding support for PLX Technology NAS7820/NAS7821/NAS7825/... formally known as Oxford Semiconductor OXE810SE/OXE815/OX820/... For now there are 4 supported boards: Cloud Engines Pogoplug V3 (without PCIe) fully supported Cloud Engines Pogoplug Pro (with PCIe) fully supported MitraStar STG-212 aka ZyXEL NSA-212, aka Medion Akoya P89625 / P89636 / P89626 / P89630, aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587 fully supported, see http://wiki.openwrt.org/toh/medion/md86587 Shuttle KD-20 partially supported (S-ATA driver lacks support for 2nd port) Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43388 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/oxnas/Makefile28
-rw-r--r--target/linux/oxnas/base-files.mk3
-rwxr-xr-xtarget/linux/oxnas/base-files/etc/board.d/01_leds25
-rwxr-xr-xtarget/linux/oxnas/base-files/etc/board.d/02_network12
-rwxr-xr-xtarget/linux/oxnas/base-files/etc/diag.sh35
-rwxr-xr-xtarget/linux/oxnas/base-files/lib/oxnas.sh48
-rw-r--r--target/linux/oxnas/base-files/lib/preinit/03_preinit_do_oxnas.sh9
-rw-r--r--target/linux/oxnas/base-files/lib/upgrade/platform.sh35
-rw-r--r--target/linux/oxnas/config-3.18366
-rw-r--r--target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts136
-rw-r--r--target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts86
-rw-r--r--target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts83
-rw-r--r--target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts91
-rw-r--r--target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi342
-rw-r--r--target/linux/oxnas/files/arch/arm/configs/ox820_defconfig104
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig24
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile8
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot2
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S87
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S27
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c112
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h233
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h33
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h7
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h34
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h6
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h32
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h34
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c284
-rw-r--r--target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c315
-rw-r--r--target/linux/oxnas/files/drivers/ata/sata_oxnas.c1889
-rw-r--r--target/linux/oxnas/files/drivers/clk/clk-oxnas.c262
-rw-r--r--target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c96
-rw-r--r--target/linux/oxnas/files/drivers/irqchip/irq-rps.c146
-rw-r--r--target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c102
-rw-r--r--target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c676
-rw-r--r--target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c1480
-rw-r--r--target/linux/oxnas/files/drivers/reset/reset-ox820.c107
-rw-r--r--target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c316
-rw-r--r--target/linux/oxnas/image/Makefile135
-rw-r--r--target/linux/oxnas/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch62
-rw-r--r--target/linux/oxnas/patches-3.18/250-add-plxtech-vendor-prefix.patch12
-rw-r--r--target/linux/oxnas/patches-3.18/300-introduce-oxnas-platform.patch79
-rw-r--r--target/linux/oxnas/patches-3.18/310-oxnas-clocksource.patch29
-rw-r--r--target/linux/oxnas/patches-3.18/320-oxnas-irqchip.patch40
-rw-r--r--target/linux/oxnas/patches-3.18/330-oxnas-pinctrl.patch32
-rw-r--r--target/linux/oxnas/patches-3.18/340-oxnas-pcie.patch26
-rw-r--r--target/linux/oxnas/patches-3.18/350-oxnas-reset.patch24
-rw-r--r--target/linux/oxnas/patches-3.18/400-oxnas-nand.patch28
-rw-r--r--target/linux/oxnas/patches-3.18/500-oxnas-sata.patch30
-rw-r--r--target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch30
-rw-r--r--target/linux/oxnas/patches-3.18/900-more-boards.patch16
-rw-r--r--target/linux/oxnas/profiles/100-Generic.mk53
53 files changed, 8311 insertions, 0 deletions
diff --git a/target/linux/oxnas/Makefile b/target/linux/oxnas/Makefile
new file mode 100644
index 0000000000..67d45bc4f6
--- /dev/null
+++ b/target/linux/oxnas/Makefile
@@ -0,0 +1,28 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=arm
+BOARD:=oxnas
+BOARDNAME:=PLXTECH NAS782X
+DEVICE_TYPE:=nas
+FEATURES:=gpio nand pcie usb usbgadget ramdisk rtc squashfs
+CPU_TYPE:=mpcore
+
+MAINTAINER:=Daniel Golle <daniel@makrotopia.org>
+
+KERNEL_PATCHVER:=3.18
+
+include $(INCLUDE_DIR)/target.mk
+
+DEFAULT_PACKAGES += \
+ kmod-button-hotplug kmod-input-gpio-keys-polled kmod-leds-gpio \
+ kmod-i2c-gpio uboot-envtools uboot-oxnas-ox820
+
+KERNELNAME:=zImage dtbs
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/oxnas/base-files.mk b/target/linux/oxnas/base-files.mk
new file mode 100644
index 0000000000..fdd2c714b2
--- /dev/null
+++ b/target/linux/oxnas/base-files.mk
@@ -0,0 +1,3 @@
+define Package/base-files/install-target
+ rm -f $(1)/etc/config/network
+endef
diff --git a/target/linux/oxnas/base-files/etc/board.d/01_leds b/target/linux/oxnas/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..17e37cd91c
--- /dev/null
+++ b/target/linux/oxnas/base-files/etc/board.d/01_leds
@@ -0,0 +1,25 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults-new.sh
+. /lib/oxnas.sh
+
+board=$(oxnas_board_name)
+board_config_update
+
+case $board in
+ stg-212)
+ ucidef_set_led_default "power" "power" "zyxel:blue:status" "1"
+ ucidef_set_led_usbdev "usb" "USB" "$1" "1-1"
+ ;;
+ kd20)
+ ucidef_set_led_default "power" "power" "kd20:blue:status" "1"
+ ;;
+ pogoplugpro | pogoplugv3)
+ ucidef_set_led_default "power" "power" "pogoplug:blue:internal" "1"
+ ;;
+
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/oxnas/base-files/etc/board.d/02_network b/target/linux/oxnas/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..3a1058402e
--- /dev/null
+++ b/target/linux/oxnas/base-files/etc/board.d/02_network
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults-new.sh
+. /lib/functions/system.sh
+
+board_config_update
+
+ucidef_set_interface_lan "eth0"
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/oxnas/base-files/etc/diag.sh b/target/linux/oxnas/base-files/etc/diag.sh
new file mode 100755
index 0000000000..ba42218049
--- /dev/null
+++ b/target/linux/oxnas/base-files/etc/diag.sh
@@ -0,0 +1,35 @@
+#!/bin/sh
+# Copyright (C) 2009-2013 OpenWrt.org
+
+. /lib/functions/leds.sh
+. /lib/oxnas.sh
+
+get_status_led() {
+ case $(oxnas_board_name) in
+ stg212)
+ status_led="zyxel:blue:status"
+ ;;
+ kd20)
+ status_led="kd20:blue:status"
+ ;;
+ pogoplugpro | pogoplugv3)
+ status_led="pogoplug:blue:internal"
+ ;;
+ esac
+}
+
+set_state() {
+ get_status_led
+
+ case "$1" in
+ preinit)
+ status_led_blink_preinit
+ ;;
+ failsafe)
+ status_led_blink_failsafe
+ ;;
+ done)
+ status_led_on
+ ;;
+ esac
+}
diff --git a/target/linux/oxnas/base-files/lib/oxnas.sh b/target/linux/oxnas/base-files/lib/oxnas.sh
new file mode 100755
index 0000000000..1a04d558d0
--- /dev/null
+++ b/target/linux/oxnas/base-files/lib/oxnas.sh
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+
+OXNAS_BOARD_NAME=
+OXNAS_MODEL=
+
+oxnas_board_detect() {
+ local machine
+ local name
+
+ machine=$(cat /proc/device-tree/model)
+
+ case "$machine" in
+ *"MitraStar Technology Corp. STG-212"*)
+ name="stg212"
+ ;;
+ *"Shuttle KD20"*)
+ name="kd20"
+ ;;
+ *"Pogoplug Pro"*)
+ name="pogoplugpro"
+ ;;
+ *"Pogoplug V3"*)
+ name="pogoplugv3"
+ ;;
+ esac
+
+ [ -z "$name" ] && name="unknown"
+
+ [ -z "$OXNAS_BOARD_NAME" ] && OXNAS_BOARD_NAME="$name"
+ [ -z "$OXNAS_MODEL" ] && OXNAS_MODEL="$machine"
+
+ [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
+
+ echo "$OXNAS_BOARD_NAME" > /tmp/sysinfo/board_name
+ echo "$OXNAS_MODEL" > /tmp/sysinfo/model
+}
+
+oxnas_board_name() {
+ local name
+
+ [ -f /tmp/sysinfo/board_name ] && name=$(cat /tmp/sysinfo/board_name)
+ [ -z "$name" ] && name="unknown"
+
+ echo "$name"
+}
diff --git a/target/linux/oxnas/base-files/lib/preinit/03_preinit_do_oxnas.sh b/target/linux/oxnas/base-files/lib/preinit/03_preinit_do_oxnas.sh
new file mode 100644
index 0000000000..ca7bce1054
--- /dev/null
+++ b/target/linux/oxnas/base-files/lib/preinit/03_preinit_do_oxnas.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+do_oxnas() {
+ . /lib/oxnas.sh
+
+ oxnas_board_detect
+}
+
+boot_hook_add preinit_main do_oxnas
diff --git a/target/linux/oxnas/base-files/lib/upgrade/platform.sh b/target/linux/oxnas/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000000..8591c7de67
--- /dev/null
+++ b/target/linux/oxnas/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,35 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+
+. /lib/oxnas.sh
+
+RAMFS_COPY_DATA=/lib/oxnas.sh
+
+platform_check_image() {
+ local board=$(oxnas_board_name)
+
+ [ "$ARGC" -gt 1 ] && return 1
+
+ nand_do_platform_check $board $1
+ return $?
+}
+
+platform_do_upgrade() {
+ if [ $$ -ne 1 ]; then
+ echo "not PID 1, upgrade aborted."
+ return 1;
+ fi
+ platform_do_upgrade_phase2 "$1" "$CONF_TAR" "$SAVE_CONFIG"
+}
+
+
+disable_watchdog() {
+ killall watchdog
+ ( ps | grep -v 'grep' | grep '/dev/watchdog' ) && {
+ echo 'Could not disable watchdog'
+ return 1
+ }
+}
+
+append sysupgrade_pre_upgrade disable_watchdog
diff --git a/target/linux/oxnas/config-3.18 b/target/linux/oxnas/config-3.18
new file mode 100644
index 0000000000..4997dc1c31
--- /dev/null
+++ b/target/linux/oxnas/config-3.18
@@ -0,0 +1,366 @@
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OXNAS=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_GIC=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ATA=y
+# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_RPS_TIMER=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="console=ttyS0,115200n8 earlyprintk=serial"
+CONFIG_COMMON_CLK=y
+# CONFIG_COMMON_CLK_PXA is not set
+CONFIG_COMPACTION=y
+CONFIG_CONSOLE_POLL=y
+CONFIG_COREDUMP=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_ABRT_EV6=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_V6K=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_XZ=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_LL_UART_8250 is not set
+CONFIG_DEBUG_LL_UART_NONE=y
+# CONFIG_DEBUG_LL_UART_PL01X is not set
+# CONFIG_DEBUG_UART_8250 is not set
+# CONFIG_DEBUG_UART_BCM63XX is not set
+# CONFIG_DEBUG_UART_PL01X is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=8
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DIRECT_IO=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_CACHE_FIQ_BROADCAST=y
+# CONFIG_DMA_CACHE_RWFO is not set
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+# CONFIG_DW_DMAC_CORE is not set
+# CONFIG_DW_DMAC_PCI is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIQ=y
+# CONFIG_FSL_EDMA is not set
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_GPIO_SYSCON is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_LRO=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_INET_UDP_DIAG=y
+CONFIG_INPUT=y
+# CONFIG_INPUT_MISC is not set
+# CONFIG_INTEL_SOC_PMIC is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISDN is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_JUMP_LABEL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KERNFS=y
+CONFIG_KGDB=y
+# CONFIG_KGDB_KDB is not set
+CONFIG_KGDB_SERIAL_CONSOLE=y
+# CONFIG_KGDB_TESTS is not set
+# CONFIG_LDM_DEBUG is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LEDS_SYSCON is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_LEDS_TRIGGER_NETDEV is not set
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LIBFDT=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_OX820=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAILBOX=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MFD_AXP20X is not set
+CONFIG_MFD_CORE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MFD_VEXPRESS_SYSREG=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MIGRATION=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MODULE_STRIPPED is not set
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_OXNAS=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+# CONFIG_NBPFAXI_DMA is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NLS=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=2
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IOMMU=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PACKET_DIAG=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+# CONFIG_PCIEASPM_POWERSAVE is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_PME=y
+CONFIG_PCI_OXNAS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_OXNAS=y
+CONFIG_PLXTECH_RPS=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PPS=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_PWM=y
+# CONFIG_PWM_FSL_FTM is not set
+CONFIG_PWM_SYSFS=y
+CONFIG_RAS=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=21
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REALTEK_PHY=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_RELAY=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_CONTROLLER_OXNAS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SATA_OXNAS=y
+CONFIG_SCHED_HRTICK=y
+CONFIG_SCSI=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_EARLYCON=y
+# CONFIG_SERIAL_KGDB_NMI is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SOCK_DIAG=y
+CONFIG_STMMAC_DA=y
+CONFIG_STMMAC_DEBUG_FS=y
+CONFIG_STMMAC_ETH=y
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_PLATFORM=y
+CONFIG_STOP_MACHINE=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_SWIOTLB=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TREE_RCU=y
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_XZ=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UID16=y
+CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VEXPRESS_CONFIG is not set
+# CONFIG_VEXPRESS_SYSCFG is not set
+# CONFIG_VFP is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts
new file mode 100644
index 0000000000..e7ee5871c4
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "ox820.dtsi"
+
+/ {
+ model = "Shuttle KD20";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
+ };
+
+ pcie-controller@47C00000 {
+ status = "okay";
+ };
+
+ uart@44200000 {
+ status = "okay";
+ };
+
+ sata@45900000 {
+ status = "okay";
+ };
+
+ nand@41000000 {
+ status = "okay";
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x00e00000>;
+ /*read-only;*/
+ };
+
+ partition@e00000 {
+ label = "ubi";
+ reg = <0x00e00000 0x07200000>;
+ };
+ };
+
+ ethernet@40400000 {
+ status = "okay";
+ snps,phy-addr = <1>;
+ phy-mode = "rgmii-id";
+ };
+
+ ehci@40200100 {
+ status = "okay";
+ };
+
+ i2c-gpio {
+ compatible = "i2c-gpio";
+ gpios = <&GPIOB 9 0 &GPIOB 10 0>;
+ i2c-gpio,delay-us = <10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ power {
+ label = "power";
+ gpios = <&GPIOA 10 1>;
+ linux,code = <116>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&GPIOA 11 1>;
+ linux,code = <0x198>;
+ };
+ eject1 {
+ label = "eject1";
+ gpios = <&GPIOA 5 1>;
+ linux,code = <161>;
+ };
+ eject2 {
+ label = "eject2";
+ gpios = <&GPIOA 6 1>;
+ linux,code = <162>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ status {
+ label = "kd20:blue:status";
+ gpios = <&GPIOB 16 0>;
+ };
+ status2 {
+ label = "kd20:red:status";
+ gpios = <&GPIOB 17 0>;
+ };
+ hdd1blue {
+ label = "kd20:blue:hdd1";
+ gpios = <&GPIOA 27 0>;
+ };
+ hdd1red {
+ label = "kd20:red:hdd1";
+ gpios = <&GPIOB 4 0>;
+ };
+ hdd2blue {
+ label = "kd20:blue:hdd2";
+ gpios = <&GPIOB 6 0>;
+ };
+ hdd2red {
+ label = "kd20:red:hdd2";
+ gpios = <&GPIOB 7 0>;
+ };
+ usb {
+ label = "kd20:blue:usb";
+ gpios = <&GPIOB 8 0>;
+ };
+ buzzer {
+ label = "kd20:buzzer";
+ gpios = <&GPIOB 11 0>;
+ };
+ };
+
+ gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&GPIOA 2 1>;
+ };
+};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts
new file mode 100644
index 0000000000..f3730c32a6
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "ox820.dtsi"
+
+/ {
+ model = "Pogoplug Pro";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
+ };
+
+ pcie-controller@47C00000 {
+ status = "okay";
+ };
+
+ uart@44200000 {
+ status = "okay";
+ };
+
+ sata@45900000 {
+ status = "okay";
+ };
+
+ nand@41000000 {
+ status = "okay";
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x00e00000>;
+ /*read-only;*/
+ };
+
+ partition@e00000 {
+ label = "ubi";
+ reg = <0x00e00000 0x07200000>;
+ };
+ };
+
+ ethernet@40400000 {
+ status = "okay";
+ };
+
+ ehci@40200100 {
+ status = "okay";
+ };
+
+ pinctrl {
+ leds {
+ pinctrl_leds: leds-0 {
+ plxtech,pins =
+ <0 2 0 0 /* MF_A2 */
+ 1 16 0 0 /* MF_B16 */
+ 1 17 0 0>; /* MF_B17 */
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ blue {
+ label = "pogoplug:blue:internal";
+ gpios = <&GPIOA 2 0>;
+
+ };
+
+ orange {
+ label = "pogoplug:orange:usr";
+ gpios = <&GPIOB 16 1>;
+ };
+
+ green {
+ label = "pogoplug:green:usr";
+ gpios = <&GPIOB 17 1>;
+ };
+ };
+};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts
new file mode 100644
index 0000000000..802913273b
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org>
+ * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "ox820.dtsi"
+
+/ {
+ model = "Pogoplug V3";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
+ };
+
+ uart@44200000 {
+ status = "okay";
+ };
+
+ sata@45900000 {
+ status = "okay";
+ };
+
+ nand@41000000 {
+ status = "okay";
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x00e00000>;
+ /*read-only;*/
+ };
+
+ partition@e00000 {
+ label = "ubi";
+ reg = <0x00e00000 0x07200000>;
+ };
+ };
+
+ ethernet@40400000 {
+ status = "okay";
+ };
+
+ ehci@40200100 {
+ status = "okay";
+ };
+
+ pinctrl {
+ leds {
+ pinctrl_leds: leds-0 {
+ plxtech,pins =
+ <0 2 0 0 /* MF_A2 */
+ 1 16 0 0 /* MF_B16 */
+ 1 17 0 0>; /* MF_B17 */
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ blue {
+ label = "pogoplug:blue:internal";
+ gpios = <&GPIOA 2 0>;
+ };
+
+ orange {
+ label = "pogoplug:orange:usr";
+ gpios = <&GPIOB 16 1>;
+ };
+
+ green {
+ label = "pogoplug:green:usr";
+ gpios = <&GPIOB 17 1>;
+ };
+ };
+
+};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts
new file mode 100644
index 0000000000..5d838065ce
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2013 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "ox820.dtsi"
+
+/ {
+ model = "MitraStar Technology Corp. STG-212";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
+ };
+
+ uart@44200000 {
+ status = "okay";
+ };
+
+ sata@45900000 {
+ status = "okay";
+ };
+
+ nand@41000000 {
+ status = "okay";
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x00e00000>;
+ /*read-only;*/
+ };
+
+ partition@e00000 {
+ label = "ubi";
+ reg = <0x00e00000 0x07200000>;
+ };
+ };
+
+ ethernet@40400000 {
+ status = "okay";
+ };
+
+ ehci@40200100 {
+ status = "okay";
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&GPIOB 11 1>;
+ linux,code = <0x198>;
+ };
+ copy {
+ label = "copy";
+ gpios = <&GPIOB 13 1>;
+ linux,code = <0x85>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ status {
+ label = "zyxel:blue:status";
+ gpios = <&GPIOB 5 0>;
+ };
+ status2 {
+ label = "zyxel:red:status";
+ gpios = <&GPIOB 6 1>;
+ };
+ copy {
+ label = "zyxel:orange:copy";
+ gpios = <&GPIOB 8 1>;
+ };
+ };
+
+ i2c-gpio {
+ compatible = "i2c-gpio";
+ gpios = <&GPIOB 9 0 &GPIOB 10 0>;
+ i2c-gpio,delay-us = <10>;
+ };
+
+};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi b/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi
new file mode 100644
index 0000000000..0a643a4e81
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi
@@ -0,0 +1,342 @@
+/*
+ * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "plxtech,nas7820", "plxtech,nas782x";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart0;
+ /* alias to determine bank index */
+ gpio0 = &GPIOA;
+ gpio1 = &GPIOB;
+
+ ethernet0 = &gmac;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm11mpcore";
+ };
+ cpu@1 {
+ compatible = "arm,arm11mpcore";
+ };
+ };
+
+ gic: gic@47001000 {
+ compatible = "arm,arm11mp-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x47001000 0x1000>,
+ <0x47000100 0x0100>;
+ };
+
+ rst: reset-controller@44E00034 {
+ compatible = "plxtech,nas782x-reset";
+ #reset-cells = <1>;
+ reg = <0x44E00034 0x8>; /* currently not used */
+ };
+
+ rps: rps@44400000 {
+ compatible = "plxtech,nas782x-rps";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x44400000 0x14>;
+ interrupts = <0 5 0x304>;
+ };
+
+ /* external oscillator */
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clocks = <&osc>;
+ };
+
+ plla: plla@44e001f0 {
+ compatible = "plxtech,nas782x-plla";
+ #clock-cells = <0>;
+ clocks = <&osc>;
+ reg = <0x44e001f0 0x10>;
+ };
+
+ pllb: pllb@44f001f0 {
+ compatible = "plxtech,nas782x-pllb";
+ #clock-cells = <0>;
+ clocks = <&osc>;
+ reg = <0x44f001f0 0x10>;
+ resets = <&rst 31>;
+ };
+
+ stdclk: stdclk {
+ compatible = "plxtech,nas782x-stdclk";
+ #clock-cells = <1>;
+ clocks = <&osc>;
+ };
+
+ twdclk: twdclk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&plla>;
+ };
+
+ gmacclk: gmacclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ pinctrl {
+ /* act as a simple bus, so children will be probed automatically */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "plxtech,nas782x-pinctrl", "simple-bus";
+ ranges;
+
+ plxtech,mux-mask = <
+ 0xFFFFFFFF 0xCC0FFDF9 0xFC000E60 0x0F03F7E0 0xF00C0FE0
+ 0x0003FFFF 0x00037FFF 0x0003FFF8 0x00000F00 0x0003F7F3
+ >;
+
+ GPIOA: gpio@44000000 {
+ compatible = "plxtech,nas782x-gpio";
+ reg = <0x44000000 0x100>, <0x44E00000 0x200>;
+ interrupts = <0 21 0x304>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #gpio-lines = <32>; /* real gpio pin count */
+ };
+
+ GPIOB: gpio@44100000 {
+ compatible = "plxtech,nas782x-gpio";
+ reg = <0x44100000 0x100>, <0x44F00000 0x200>;
+ interrupts = <0 22 0x304>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #gpio-lines = <18>; /* real gpio pin count */
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ plxtech,pins =
+ <0 30 5 0 /* MF_A30 PINMUX_ALT PINMUX_UARTA_SIN */
+ 0 31 5 0>; /* MF_A31 PINMUX_ALT PINMUX_UARTA_SOUT */
+ };
+ };
+
+ gmac0 {
+ pinctrl_gmac0: gmac0-0 {
+ plxtech,pins =
+ <0 3 1 0 /* MF_A3 PINMUX_2 PINMUX_MACA_MDC */
+ 0 4 1 0>; /* MF_A4 PINMUX_2 PINMUX_MACA_MDIO */
+ };
+ };
+
+ nand0 {
+ pinctrl_nand0: nand0-0 {
+ plxtech,pins =
+ <0 12 1 0 /* MF_A12 PINMUX_2 PINMUX_STATIC_DATA0 */
+ 0 13 1 0 /* MF_A13 PINMUX_2 PINMUX_STATIC_DATA1 */
+ 0 14 1 0 /* MF_A14 PINMUX_2 PINMUX_STATIC_DATA2 */
+ 0 15 1 0 /* MF_A15 PINMUX_2 PINMUX_STATIC_DATA3 */
+ 0 16 1 0 /* MF_A16 PINMUX_2 PINMUX_STATIC_DATA4 */
+ 0 17 1 0 /* MF_A17 PINMUX_2 PINMUX_STATIC_DATA5 */
+ 0 18 1 0 /* MF_A18 PINMUX_2 PINMUX_STATIC_DATA6 */
+ 0 19 1 0 /* MF_A19 PINMUX_2 PINMUX_STATIC_DATA7 */
+
+ 0 20 1 0 /* MF_A20 PINMUX_2 PINMUX_STATIC_NWE */
+ 0 21 1 0 /* MF_A21 PINMUX_2 PINMUX_STATIC_NOE */
+ 0 22 1 0 /* MF_A22 PINMUX_2 PINMUX_STATIC_NCS */
+ 0 23 1 0 /* MF_A23 PINMUX_2 PINMUX_STATIC_ADDR18 */
+ 0 24 1 0>; /* MF_A24 PINMUX_2 PINMUX_STATIC_ADDR19 */
+ };
+ };
+ };
+
+ pcie-controller@47C00000 {
+ compatible = "plxtech,nas782x-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* flag & space bus address host address size */
+ ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000
+ 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000
+ 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000
+ 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>;
+
+ bus-range = <0x00 0x7f>;
+
+ /* cfg inbound translator phy*/
+ reg = <0x47C00000 0x1000>, <0x47D00000 0x100>, <0x44A00000 0x10>;
+
+ #interrupt-cells = <1>;
+ /* wild card mask, match all bus address & interrupt specifier */
+ /* format: bus address mask, interrupt specifier mask */
+ /* each bit 1 means need match, 0 means ignored when match */
+ interrupt-map-mask = <0 0 0 0>;
+ /* format: a list of: bus address, interrupt specifier,
+ * parent interrupt controller & specifier */
+ interrupt-map = <0 0 0 0 &gic 0 19 0x304>;
+
+ gpios = <&GPIOB 12 0>;
+ clocks = <&stdclk 8>, <&pllb>;
+ clock-names = "pcie", "busclk";
+ resets = <&rst 7>, <&rst 14>;
+ reset-names = "pcie", "phy";
+
+ plxtech,pcie-hcsl-bit = <2>;
+ plxtech,pcie-ctrl-offset = <0x120>;
+ plxtech,pcie-outbound-offset = <0x138>;
+ status = "disabled";
+ };
+
+ pcie-controller@47E00000 {
+ compatible = "plxtech,nas782x-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* flag & space bus address host address size */
+ ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000
+ 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000
+ 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000
+ 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>;
+
+ bus-range = <0x80 0xff>;
+
+ /* cfg inbound translator phy*/
+ reg = <0x47E00000 0x1000>, <0x47F00000 0x100>, <0x44A00000 0x10>;
+
+ #interrupt-cells = <1>;
+ /* wild card mask, match all bus address & interrupt specifier */
+ /* format: bus address mask, interrupt specifier mask */
+ /* each bit 1 means need match, 0 means ignored when match */
+ interrupt-map-mask = <0 0 0 0>;
+ /* format: a list of: bus address, interrupt specifier,
+ * parent interrupt controller & specifier */
+ interrupt-map = <0 0 0 0 &gic 0 20 0x304>;
+
+ /* gpios = <&GPIOB 12 0>; */
+ clocks = <&stdclk 11>, <&pllb>;
+ clock-names = "pcie", "busclk";
+ resets = <&rst 23>, <&rst 14>;
+ reset-names = "pcie", "phy";
+
+ plxtech,pcie-hcsl-bit = <3>;
+ plxtech,pcie-ctrl-offset = <0x124>;
+ plxtech,pcie-outbound-offset = <0x174>;
+ status = "disabled";
+ };
+
+ local-timer@47000600 {
+ compatible = "arm,arm11mp-twd-timer";
+ reg = <0x47000600 0x20>;
+ interrupts = <1 13 0x304>; /* percpu, irq 29, cpu mask 3, level high */
+ clocks = <&twdclk>;
+ };
+
+ watchdog@47000620 {
+ compatible = "mpcore_wdt";
+ reg = <0x47000620 0x20>;
+ interrupts = <1 14 0x304>; /* percpu, irq 30, cpu mask 3, level high */
+ clocks = <&twdclk>;
+ };
+
+ timer@44400200 {
+ compatible = "plxtech,nas782x-rps-timer";
+ reg = <0x44400200 0x40>;
+ clocks = <&sysclk>;
+ };
+
+ uart0: uart@44200000 {
+ compatible = "ns16550a";
+ reg = <0x44200000 0x100>;
+ clock-frequency = <6250000>;
+ interrupts = <0 23 0x304>;
+ reg-shift = <0>;
+ fifo-size = <16>;
+ reg-io-width = <1>;
+ current-speed = <115200>;
+ no-loopback-test;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "disabled";
+ };
+
+ sata@45900000 {
+ compatible = "plxtech,nas782x-sata";
+ /* port sgdma core */
+ reg = <0x45900000 0x100>, <0x459B0000 0x10>, <0x459E0000 0x2000>,
+ /* phy descriptors (optional) */
+ <0x44900000 0x0C>, <0x50000000 0x1000>;
+ interrupts = <0 18 0x304>;
+ clocks = <&stdclk 4>;
+ resets = <&rst 11>, <&rst 12>, <&rst 13>;
+ reset-names = "sata", "link", "phy";
+ status = "disabled";
+ };
+
+ nand@41000000 {
+ compatible = "plxtech,nand-nas782x", "gen_nand";
+ reg = <0x41000000 0x100000>, <0x41C00000 0x20>;
+ nand-ecc-mode = "soft";
+ clocks = <&stdclk 9>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand0>;
+ resets = <&rst 15>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
+
+ gmac: ethernet@40400000 {
+ compatible = "plxtech,nas782x-gmac", "snps,dwmac";
+ reg = <0x40400000 0x2000>;
+ interrupts = <0 8 0x304>, <0 17 0x304>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ mac-address = [000000000000]; /* Filled in by U-Boot */
+ phy-mode = "rgmii";
+ clocks = <&stdclk 7>, <&gmacclk>;
+ clock-names = "gmac", "stmmaceth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gmac0>;
+ resets = <&rst 6>;
+ status = "disabled";
+ };
+
+ ehci@40200100 {
+ compatible = "plxtech,nas782x-ehci";
+ reg = <0x40200100 0xf00>;
+ interrupts = <0 7 0x304>;
+ clocks = <&stdclk 6>, <&pllb>, <&stdclk 12>;
+ clock-names = "usb", "refsrc", "phyref";
+ resets = <&rst 4>, <&rst 5>, <&rst 26>;
+ reset-names = "host", "phya", "phyb";
+ /* Otherwise ref300 is used, which is derived from sata phy
+ * in that case, usb depends on sata initialization */
+ /* FIXME: how to make this dependency explicit ? */
+ plxtch,ehci_use_pllb;
+ status = "disabled";
+ };
+};
diff --git a/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig b/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig
new file mode 100644
index 0000000000..bb0a9d68a8
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig
@@ -0,0 +1,104 @@
+CONFIG_CROSS_COMPILE="arm-linux-gnueabi-"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_CGROUPS=y
+CONFIG_NAMESPACES=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_ARCH_OXNAS=y
+# CONFIG_DMA_CACHE_RWFO is not set
+CONFIG_DMA_CACHE_FIQ_BROADCAST=y
+CONFIG_PCI=y
+CONFIG_PCI_OXNAS=y
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+CONFIG_NR_CPUS=2
+CONFIG_HOTPLUG_CPU=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_USE_OF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IPV6=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_MAC80211_RC_PID=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_OXNAS=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_SATA_OXNAS=y
+CONFIG_NETDEVICES=y
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_DEBUG_FS=y
+CONFIG_STMMAC_DA=y
+CONFIG_ATH_CARDS=y
+CONFIG_ATH9K=y
+CONFIG_ATH9K_LEGACY_RATE_CONTROL=y
+# CONFIG_RTL_CARDS is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_OXNAS=y
+CONFIG_USB_STORAGE=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_COMMON_CLK_DEBUG=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_8250=y
+CONFIG_DEBUG_UART_PHYS=0x44200000
+CONFIG_DEBUG_UART_VIRT=0xF0000000
+CONFIG_DEBUG_UART_8250_SHIFT=0
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig b/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig
new file mode 100644
index 0000000000..eb96f1b74c
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig
@@ -0,0 +1,24 @@
+choice
+ prompt "Oxnas platform type"
+ default MACH_OXNAS
+ depends on ARCH_OXNAS
+
+config MACH_OX820
+ bool "Generic NAS7820 Support"
+ select ARM_GIC
+ select GENERIC_CLOCKEVENTS
+ select CPU_V6K
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if SMP
+ select HAVE_SMP
+ select PLXTECH_RPS
+ select CLKSRC_OF
+ select CLKSRC_RPS_TIMER
+ select USB_ARCH_HAS_EHCI
+ select PINCTRL_OXNAS
+ select PINCTRL
+ select RESET_CONTROLLER_OXNAS
+ help
+ Include support for the ox820 platform.
+
+endchoice
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile
new file mode 100644
index 0000000000..6862c34981
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-$(CONFIG_MACH_OX820) += mach-ox820.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_DMA_CACHE_FIQ_BROADCAST) += fiq.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot
new file mode 100644
index 0000000000..b52e473d64
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y += 0x60008000
+params_phys-y := 0x60000100
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S b/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S
new file mode 100644
index 0000000000..6acd5a7394
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2012 Gateworks Corporation
+ * Chris Lang <clang@gateworks.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+
+#define D_CACHE_LINE_SIZE 32
+
+ .text
+
+/*
+ * R8 - DMA Start Address
+ * R9 - DMA Length
+ * R10 - DMA Direction
+ * R11 - DMA type
+ * R12 - fiq_buffer Address
+*/
+
+ .global ox820_fiq_end
+ENTRY(ox820_fiq_start)
+ str r8, [r13]
+
+ ldmia r12, {r8, r9, r10}
+ and r11, r10, #0x3000000
+ and r10, r10, #0xff
+
+ teq r11, #0x1000000
+ beq ox820_dma_map_area
+ teq r11, #0x2000000
+ beq ox820_dma_unmap_area
+ /* fall through */
+ox820_dma_flush_range:
+ bic r8, r8, #D_CACHE_LINE_SIZE - 1
+1:
+ mcr p15, 0, r8, c7, c14, 1 @ clean & invalidate D line
+ add r8, r8, #D_CACHE_LINE_SIZE
+ cmp r8, r9
+ blo 1b
+ /* fall through */
+ox820_fiq_exit:
+ mov r8, #0
+ str r8, [r12, #8]
+ mcr p15, 0, r8, c7, c10, 4 @ drain write buffer
+ subs pc, lr, #4
+
+ox820_dma_map_area:
+ add r9, r9, r8
+ teq r10, #DMA_FROM_DEVICE
+ beq ox820_dma_inv_range
+ teq r10, #DMA_TO_DEVICE
+ bne ox820_dma_flush_range
+ /* fall through */
+ox820_dma_clean_range:
+ bic r8, r8, #D_CACHE_LINE_SIZE - 1
+1:
+ mcr p15, 0, r8, c7, c10, 1 @ clean D line
+ add r8, r8, #D_CACHE_LINE_SIZE
+ cmp r8, r9
+ blo 1b
+ b ox820_fiq_exit
+
+ox820_dma_unmap_area:
+ add r9, r9, r8
+ teq r10, #DMA_TO_DEVICE
+ beq ox820_fiq_exit
+ /* fall through */
+ox820_dma_inv_range:
+ tst r8, #D_CACHE_LINE_SIZE - 1
+ bic r8, r8, #D_CACHE_LINE_SIZE - 1
+ mcrne p15, 0, r8, c7, c10, 1 @ clean D line
+ tst r9, #D_CACHE_LINE_SIZE - 1
+ bic r9, r9, #D_CACHE_LINE_SIZE - 1
+ mcrne p15, 0, r9, c7, c14, 1 @ clean & invalidate D line
+1:
+ mcr p15, 0, r8, c7, c6, 1 @ invalidate D line
+ add r8, r8, #D_CACHE_LINE_SIZE
+ cmp r8, r9
+ blo 1b
+ b ox820_fiq_exit
+
+ox820_fiq_end:
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S b/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S
new file mode 100644
index 0000000000..a63edae62b
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S
@@ -0,0 +1,27 @@
+/*
+ * linux/arch/arm/mach-ox820/headsmp.S
+ *
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __INIT
+
+/*
+ * OX820 specific entry point for secondary CPUs.
+ */
+ENTRY(ox820_secondary_startup)
+ mov r4, #0
+ /* invalidate both caches and branch target cache */
+ mcr p15, 0, r4, c7, c7, 0
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c
new file mode 100644
index 0000000000..861beee7b3
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c
@@ -0,0 +1,112 @@
+/*
+ * linux/arch/arm/mach-realview/hotplug.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+#include <mach/smp.h>
+
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ " mcr p15, 0, %1, c7, c5, 0\n"
+ " mcr p15, 0, %1, c7, c10, 4\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, #0x20\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0), "Ir" (CR_C)
+ : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, #0x20\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C)
+ : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+ /*
+ * there is no power-control hardware on this platform, so all
+ * we can do is put the core into WFI; this is safe as the calling
+ * code will have already disabled interrupts
+ */
+ for (;;) {
+ /*
+ * here's the WFI
+ */
+ asm(".word 0xe320f003\n"
+ :
+ :
+ : "memory", "cc");
+
+ if (read_pen_release() == cpu_logical_map(cpu)) {
+ /*
+ * OK, proper wakeup, we're done
+ */
+ break;
+ }
+
+ /*
+ * Getting here, means that we have come out of WFI without
+ * having been woken up - this shouldn't happen
+ *
+ * Just note it happening - when we're woken, we can report
+ * its occurrence.
+ */
+ (*spurious)++;
+ }
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __ref ox820_cpu_die(unsigned int cpu)
+{
+ int spurious = 0;
+
+ /*
+ * we're ready for shutdown now, so do it
+ */
+ cpu_enter_lowpower();
+ platform_do_lowpower(cpu, &spurious);
+
+ /*
+ * bring this CPU back into the world of cache
+ * coherency, and then restore interrupts
+ */
+ cpu_leave_lowpower();
+
+ if (spurious)
+ pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h
new file mode 100644
index 0000000000..caae772c31
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h
@@ -0,0 +1,233 @@
+/*
+ * arch/arm/mach-0x820/include/mach/hardware.h
+ *
+ * Copyright (C) 2009 Oxford Semiconductor Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <linux/io.h>
+#include <mach/iomap.h>
+
+/*
+ * Location of flags and vectors in SRAM for controlling the booting of the
+ * secondary ARM11 processors.
+ */
+
+#define OXNAS_SCU_BASE_VA OXNAS_PERCPU_BASE_VA
+#define OXNAS_GICN_BASE_VA(n) (OXNAS_PERCPU_BASE_VA + 0x200 + n*0x100)
+
+#define HOLDINGPEN_CPU IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
+#define HOLDINGPEN_LOCATION IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
+
+/**
+ * System block reset and clock control
+ */
+#define SYS_CTRL_PCI_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x20)
+#define SYSCTRL_CLK_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x24)
+#define SYS_CTRL_CLK_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x2C)
+#define SYS_CTRL_CLK_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x30)
+#define SYS_CTRL_RST_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x34)
+#define SYS_CTRL_RST_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x38)
+
+#define SYS_CTRL_PLLSYS_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x48)
+#define SYS_CTRL_CLK_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x64)
+#define SYS_CTRL_PLLSYS_KEY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x6C)
+#define SYS_CTRL_GMAC_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x78)
+#define SYS_CTRL_GMAC_DELAY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x100)
+
+/* Scratch registers */
+#define SYS_CTRL_SCRATCHWORD0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
+#define SYS_CTRL_SCRATCHWORD1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
+#define SYS_CTRL_SCRATCHWORD2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xcc)
+#define SYS_CTRL_SCRATCHWORD3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xd0)
+
+#define SYS_CTRL_PLLA_CTRL0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F0)
+#define SYS_CTRL_PLLA_CTRL1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F4)
+#define SYS_CTRL_PLLA_CTRL2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F8)
+#define SYS_CTRL_PLLA_CTRL3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1FC)
+
+#define SYS_CTRL_USBHSMPH_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x40)
+#define SYS_CTRL_USBHSMPH_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x44)
+#define SYS_CTRL_REF300_DIV IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xF8)
+#define SYS_CTRL_USBHSPHY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x84)
+#define SYS_CTRL_USB_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x90)
+
+/* pcie */
+#define SYS_CTRL_HCSL_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x114)
+
+/* System control multi-function pin function selection */
+#define SYS_CTRL_SECONDARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x14)
+#define SYS_CTRL_TERTIARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x8c)
+#define SYS_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x94)
+#define SYS_CTRL_DEBUG_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x9c)
+#define SYS_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xa4)
+#define SYS_CTRL_PULLUP_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xac)
+
+/* Secure control multi-function pin function selection */
+#define SEC_CTRL_SECONDARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x14)
+#define SEC_CTRL_TERTIARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x8c)
+#define SEC_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x94)
+#define SEC_CTRL_DEBUG_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x9c)
+#define SEC_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xa4)
+#define SEC_CTRL_PULLUP_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xac)
+
+#define SEC_CTRL_COPRO_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x68)
+#define SEC_CTRL_SECURE_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x98)
+#define SEC_CTRL_LEON_DEBUG IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF0)
+#define SEC_CTRL_PLLB_DIV_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF8)
+#define SEC_CTRL_PLLB_CTRL0 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F0)
+#define SEC_CTRL_PLLB_CTRL1 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
+#define SEC_CTRL_PLLB_CTRL8 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
+
+#define RPSA_IRQ_SOFT IOMEM(OXNAS_RPSA_BASE_VA + 0x10)
+#define RPSA_FIQ_ENABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x108)
+#define RPSA_FIQ_DISABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x10C)
+#define RPSA_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSA_BASE_VA + 0x1FC)
+
+#define RPSC_IRQ_SOFT IOMEM(OXNAS_RPSC_BASE_VA + 0x10)
+#define RPSC_FIQ_ENABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x108)
+#define RPSC_FIQ_DISABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x10C)
+#define RPSC_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSC_BASE_VA + 0x1FC)
+
+#define RPSA_TIMER2_VAL IOMEM(OXNAS_RPSA_BASE_VA + 0x224)
+
+#define REF300_DIV_INT_SHIFT 8
+#define REF300_DIV_FRAC_SHIFT 0
+#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT)
+#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT)
+
+#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16
+#define USBHSPHY_SUSPENDM_MANUAL_STATE 15
+#define USBHSPHY_ATE_ESET 14
+#define USBHSPHY_TEST_DIN 6
+#define USBHSPHY_TEST_ADD 2
+#define USBHSPHY_TEST_DOUT_SEL 1
+#define USBHSPHY_TEST_CLK 0
+
+#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5
+#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
+#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
+#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
+
+#define USBAMUX_DEVICE BIT(4)
+
+#define USBPHY_REFCLKDIV_SHIFT 2
+#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT)
+#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT)
+#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT)
+
+#define USB_CTRL_USB_CKO_SEL_BIT 0
+
+#define USB_INT_CLK_XTAL 0
+#define USB_INT_CLK_REF300 2
+#define USB_INT_CLK_PLLB 3
+
+#define SYS_CTRL_GMAC_CKEN_RX_IN 14
+#define SYS_CTRL_GMAC_CKEN_RXN_OUT 13
+#define SYS_CTRL_GMAC_CKEN_RX_OUT 12
+#define SYS_CTRL_GMAC_CKEN_TX_IN 10
+#define SYS_CTRL_GMAC_CKEN_TXN_OUT 9
+#define SYS_CTRL_GMAC_CKEN_TX_OUT 8
+#define SYS_CTRL_GMAC_RX_SOURCE 7
+#define SYS_CTRL_GMAC_TX_SOURCE 6
+#define SYS_CTRL_GMAC_LOW_TX_SOURCE 4
+#define SYS_CTRL_GMAC_AUTO_TX_SOURCE 3
+#define SYS_CTRL_GMAC_RGMII 2
+#define SYS_CTRL_GMAC_SIMPLE_MUX 1
+#define SYS_CTRL_GMAC_CKEN_GTX 0
+#define SYS_CTRL_GMAC_TX_VARDELAY_SHIFT 0
+#define SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT 8
+#define SYS_CTRL_GMAC_RX_VARDELAY_SHIFT 16
+#define SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT 24
+#define SYS_CTRL_GMAC_TX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TX_VARDELAY_SHIFT)
+#define SYS_CTRL_GMAC_TXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT)
+#define SYS_CTRL_GMAC_RX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RX_VARDELAY_SHIFT)
+#define SYS_CTRL_GMAC_RXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT)
+
+#define PLLB_BYPASS 1
+#define PLLB_ENSAT 3
+#define PLLB_OUTDIV 4
+#define PLLB_REFDIV 8
+#define PLLB_DIV_INT_SHIFT 8
+#define PLLB_DIV_FRAC_SHIFT 0
+#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT)
+#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT)
+
+#define SYS_CTRL_CKCTRL_PCI_DIV_BIT 0
+#define SYS_CTRL_CKCTRL_SLOW_BIT 8
+
+#define SYS_CTRL_UART2_DEQ_EN 0
+#define SYS_CTRL_UART3_DEQ_EN 1
+#define SYS_CTRL_UART3_IQ_EN 2
+#define SYS_CTRL_UART4_IQ_EN 3
+#define SYS_CTRL_UART4_NOT_PCI_MODE 4
+
+#define SYS_CTRL_PCI_CTRL1_PCI_STATIC_RQ_BIT 11
+
+#define PLLA_REFDIV_MASK 0x3F
+#define PLLA_REFDIV_SHIFT 8
+#define PLLA_OUTDIV_MASK 0x7
+#define PLLA_OUTDIV_SHIFT 4
+
+/* bit numbers of clock control register */
+#define SYS_CTRL_CLK_COPRO 0
+#define SYS_CTRL_CLK_DMA 1
+#define SYS_CTRL_CLK_CIPHER 2
+#define SYS_CTRL_CLK_SD 3
+#define SYS_CTRL_CLK_SATA 4
+#define SYS_CTRL_CLK_I2S 5
+#define SYS_CTRL_CLK_USBHS 6
+#define SYS_CTRL_CLK_MACA 7
+#define SYS_CTRL_CLK_MAC SYS_CTRL_CLK_MACA
+#define SYS_CTRL_CLK_PCIEA 8
+#define SYS_CTRL_CLK_STATIC 9
+#define SYS_CTRL_CLK_MACB 10
+#define SYS_CTRL_CLK_PCIEB 11
+#define SYS_CTRL_CLK_REF600 12
+#define SYS_CTRL_CLK_USBDEV 13
+#define SYS_CTRL_CLK_DDR 14
+#define SYS_CTRL_CLK_DDRPHY 15
+#define SYS_CTRL_CLK_DDRCK 16
+
+
+/* bit numbers of reset control register */
+#define SYS_CTRL_RST_SCU 0
+#define SYS_CTRL_RST_COPRO 1
+#define SYS_CTRL_RST_ARM0 2
+#define SYS_CTRL_RST_ARM1 3
+#define SYS_CTRL_RST_USBHS 4
+#define SYS_CTRL_RST_USBHSPHYA 5
+#define SYS_CTRL_RST_MACA 6
+#define SYS_CTRL_RST_MAC SYS_CTRL_RST_MACA
+#define SYS_CTRL_RST_PCIEA 7
+#define SYS_CTRL_RST_SGDMA 8
+#define SYS_CTRL_RST_CIPHER 9
+#define SYS_CTRL_RST_DDR 10
+#define SYS_CTRL_RST_SATA 11
+#define SYS_CTRL_RST_SATA_LINK 12
+#define SYS_CTRL_RST_SATA_PHY 13
+#define SYS_CTRL_RST_PCIEPHY 14
+#define SYS_CTRL_RST_STATIC 15
+#define SYS_CTRL_RST_GPIO 16
+#define SYS_CTRL_RST_UART1 17
+#define SYS_CTRL_RST_UART2 18
+#define SYS_CTRL_RST_MISC 19
+#define SYS_CTRL_RST_I2S 20
+#define SYS_CTRL_RST_SD 21
+#define SYS_CTRL_RST_MACB 22
+#define SYS_CTRL_RST_PCIEB 23
+#define SYS_CTRL_RST_VIDEO 24
+#define SYS_CTRL_RST_DDR_PHY 25
+#define SYS_CTRL_RST_USBHSPHYB 26
+#define SYS_CTRL_RST_USBDEV 27
+#define SYS_CTRL_RST_ARMDBG 29
+#define SYS_CTRL_RST_PLLA 30
+#define SYS_CTRL_RST_PLLB 31
+
+#endif
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h
new file mode 100644
index 0000000000..01de7b78ef
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h
@@ -0,0 +1,33 @@
+#ifndef __MACH_OXNAS_IOMAP_H
+#define __MACH_OXNAS_IOMAP_H
+
+#include <linux/sizes.h>
+
+#define OXNAS_UART1_BASE 0x44200000
+#define OXNAS_UART1_SIZE SZ_32
+#define OXNAS_UART1_BASE_VA 0xF0000000
+
+#define OXNAS_UART2_BASE 0x44300000
+#define OXNAS_UART2_SIZE SZ_32
+
+#define OXNAS_PERCPU_BASE 0x47000000
+#define OXNAS_PERCPU_SIZE SZ_8K
+#define OXNAS_PERCPU_BASE_VA 0xF0002000
+
+#define OXNAS_SYSCRTL_BASE 0x44E00000
+#define OXNAS_SYSCRTL_SIZE SZ_4K
+#define OXNAS_SYSCRTL_BASE_VA 0xF0004000
+
+#define OXNAS_SECCRTL_BASE 0x44F00000
+#define OXNAS_SECCRTL_SIZE SZ_4K
+#define OXNAS_SECCRTL_BASE_VA 0xF0005000
+
+#define OXNAS_RPSA_BASE 0x44400000
+#define OXNAS_RPSA_SIZE SZ_4K
+#define OXNAS_RPSA_BASE_VA 0xF0006000
+
+#define OXNAS_RPSC_BASE 0x44500000
+#define OXNAS_RPSC_SIZE SZ_4K
+#define OXNAS_RPSC_BASE_VA 0xF0007000
+
+#endif
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h
new file mode 100644
index 0000000000..bcafd10ae0
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_SOFT 1
+#define NR_IRQS 160
+
+#endif
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h
new file mode 100644
index 0000000000..1128635963
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h
@@ -0,0 +1,34 @@
+/*
+ * smp.h
+ *
+ * Created on: Sep 24, 2013
+ * Author: mahaijun
+ */
+
+#ifndef _NAS782X_SMP_H_
+#define _NAS782X_SMP_H_
+
+#include <mach/hardware.h>
+
+extern void ox820_secondary_startup(void);
+extern void ox820_cpu_die(unsigned int cpu);
+
+static inline void write_pen_release(int val)
+{
+ writel(val, HOLDINGPEN_CPU);
+}
+
+static inline int read_pen_release(void)
+{
+ return readl(HOLDINGPEN_CPU);
+}
+
+extern struct smp_operations ox820_smp_ops;
+
+extern unsigned char ox820_fiq_start, ox820_fiq_end;
+extern void v6_dma_map_area(const void *, size_t, int);
+extern void v6_dma_unmap_area(const void *, size_t, int);
+extern void v6_dma_flush_range(const void *, const void *);
+extern void v6_flush_kern_dcache_area(void *, size_t);
+
+#endif /* _NAS782X_SMP_H_ */
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h
new file mode 100644
index 0000000000..4133594d16
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 6250000
+
+#endif
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h
new file mode 100644
index 0000000000..fbc372787e
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h
@@ -0,0 +1,32 @@
+/* linux/include/asm-arm/arch-oxnas/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#define OXNAS_UART1_BASE 0x44200000
+
+static inline void putc(int c)
+{
+ static volatile unsigned char *uart =
+ (volatile unsigned char *)OXNAS_UART1_BASE;
+
+ while (!(uart[5] & 0x20)) { /* LSR reg THR empty bit */
+ barrier();
+ }
+ uart[0] = c; /* THR register */
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h
new file mode 100644
index 0000000000..910d7019c7
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h
@@ -0,0 +1,34 @@
+#ifndef _NAS782X_UTILS_H
+#define _NAS782X_UTILS_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask)
+{
+ u32 val = readl_relaxed(p);
+
+ val &= ~mask;
+ writel_relaxed(val, p);
+}
+
+static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask)
+{
+ u32 val = readl_relaxed(p);
+
+ val |= mask;
+ writel_relaxed(val, p);
+}
+
+static inline void oxnas_register_value_mask(void __iomem *p,
+ unsigned mask, unsigned new_value)
+{
+ /* TODO sanity check mask & new_value = new_value */
+ u32 val = readl_relaxed(p);
+
+ val &= ~mask;
+ val |= new_value;
+ writel_relaxed(val, p);
+}
+
+#endif /* _NAS782X_UTILS_H */
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c
new file mode 100644
index 0000000000..4b247b6b56
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c
@@ -0,0 +1,284 @@
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/of_platform.h>
+#include <linux/clocksource.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/stmmac.h>
+#include <linux/slab.h>
+#include <linux/gfp.h>
+#include <linux/reset.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+#include <asm/page.h>
+#include <mach/iomap.h>
+#include <mach/hardware.h>
+#include <mach/utils.h>
+#include <mach/smp.h>
+
+static struct map_desc ox820_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long)OXNAS_PERCPU_BASE_VA,
+ .pfn = __phys_to_pfn(OXNAS_PERCPU_BASE),
+ .length = OXNAS_PERCPU_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)OXNAS_SYSCRTL_BASE_VA,
+ .pfn = __phys_to_pfn(OXNAS_SYSCRTL_BASE),
+ .length = OXNAS_SYSCRTL_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)OXNAS_SECCRTL_BASE_VA,
+ .pfn = __phys_to_pfn(OXNAS_SECCRTL_BASE),
+ .length = OXNAS_SECCRTL_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)OXNAS_RPSA_BASE_VA,
+ .pfn = __phys_to_pfn(OXNAS_RPSA_BASE),
+ .length = OXNAS_RPSA_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)OXNAS_RPSC_BASE_VA,
+ .pfn = __phys_to_pfn(OXNAS_RPSC_BASE),
+ .length = OXNAS_RPSC_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init ox820_map_common_io(void)
+{
+ debug_ll_io_init();
+ iotable_init(ox820_io_desc, ARRAY_SIZE(ox820_io_desc));
+}
+
+struct plat_gmac_data {
+ struct plat_stmmacenet_data stmmac;
+ struct clk *clk;
+};
+
+void *ox820_gmac_setup(struct platform_device *pdev)
+{
+ struct plat_gmac_data *pdata = pdev->dev.platform_data;
+
+ pdata->clk = clk_get(&pdev->dev, "gmac");
+ return (void *) pdata->clk;
+};
+
+int ox820_gmac_init(struct platform_device *pdev, void *priv)
+{
+ int ret;
+ unsigned value;
+
+ ret = device_reset(&pdev->dev);
+ if (ret)
+ return ret;
+
+ if (IS_ERR(priv))
+ return PTR_ERR(priv);
+ clk_prepare_enable(priv);
+
+ value = readl(SYS_CTRL_GMAC_CTRL);
+
+ /* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */
+ value |= BIT(SYS_CTRL_GMAC_CKEN_GTX);
+ /* Use simple mux for 25/125 Mhz clock switching */
+ value |= BIT(SYS_CTRL_GMAC_SIMPLE_MUX);
+ /* set auto switch tx clock source */
+ value |= BIT(SYS_CTRL_GMAC_AUTO_TX_SOURCE);
+ /* enable tx & rx vardelay */
+ value |= BIT(SYS_CTRL_GMAC_CKEN_TX_OUT);
+ value |= BIT(SYS_CTRL_GMAC_CKEN_TXN_OUT);
+ value |= BIT(SYS_CTRL_GMAC_CKEN_TX_IN);
+ value |= BIT(SYS_CTRL_GMAC_CKEN_RX_OUT);
+ value |= BIT(SYS_CTRL_GMAC_CKEN_RXN_OUT);
+ value |= BIT(SYS_CTRL_GMAC_CKEN_RX_IN);
+ writel(value, SYS_CTRL_GMAC_CTRL);
+
+ /* set tx & rx vardelay */
+ value = 0;
+ value |= SYS_CTRL_GMAC_TX_VARDELAY(4);
+ value |= SYS_CTRL_GMAC_TXN_VARDELAY(2);
+ value |= SYS_CTRL_GMAC_RX_VARDELAY(10);
+ value |= SYS_CTRL_GMAC_RXN_VARDELAY(8);
+ writel(value, SYS_CTRL_GMAC_DELAY_CTRL);
+
+ return 0;
+}
+
+void ox820_gmac_exit(struct platform_device *pdev, void *priv)
+{
+ struct reset_control *rstc;
+
+ clk_disable_unprepare(priv);
+ clk_put(priv);
+
+ rstc = reset_control_get(&pdev->dev, NULL);
+ if (!IS_ERR(rstc)) {
+ reset_control_assert(rstc);
+ reset_control_put(rstc);
+ }
+}
+
+static int __init ox820_ether_init(void)
+{
+ struct device_node *node;
+ struct platform_device *pdev;
+ struct plat_gmac_data *pdata;
+
+ node = of_find_compatible_node(NULL, NULL, "plxtech,nas782x-gmac");
+ if (!node)
+ return -ENOENT;
+
+ pdev = of_find_device_by_node(node);
+ of_node_put(node);
+
+ if (!pdev)
+ return -EINVAL;
+
+ pdata = kzalloc(sizeof(struct plat_gmac_data), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->stmmac.setup = ox820_gmac_setup;
+ pdata->stmmac.init = ox820_gmac_init;
+ pdata->stmmac.exit = ox820_gmac_exit;
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+
+static void __init ox820_dt_init(void)
+{
+ int ret;
+
+ ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
+ NULL);
+
+ if (ret) {
+ pr_err("of_platform_populate failed: %d\n", ret);
+ BUG();
+ }
+
+ ret = ox820_ether_init();
+
+ if (ret)
+ pr_info("ox820_ether_init failed: %d\n", ret);
+}
+
+static void __init ox820_timer_init(void)
+{
+ of_clk_init(NULL);
+ clocksource_of_init();
+}
+
+void ox820_init_early(void)
+{
+
+}
+
+void ox820_assert_system_reset(enum reboot_mode mode, const char *cmd)
+{
+ u32 value;
+
+/* Assert reset to cores as per power on defaults
+ * Don't touch the DDR interface as things will come to an impromptu stop
+ * NB Possibly should be asserting reset for PLLB, but there are timing
+ * concerns here according to the docs */
+ value = BIT(SYS_CTRL_RST_COPRO) |
+ BIT(SYS_CTRL_RST_USBHS) |
+ BIT(SYS_CTRL_RST_USBHSPHYA) |
+ BIT(SYS_CTRL_RST_MACA) |
+ BIT(SYS_CTRL_RST_PCIEA) |
+ BIT(SYS_CTRL_RST_SGDMA) |
+ BIT(SYS_CTRL_RST_CIPHER) |
+ BIT(SYS_CTRL_RST_SATA) |
+ BIT(SYS_CTRL_RST_SATA_LINK) |
+ BIT(SYS_CTRL_RST_SATA_PHY) |
+ BIT(SYS_CTRL_RST_PCIEPHY) |
+ BIT(SYS_CTRL_RST_STATIC) |
+ BIT(SYS_CTRL_RST_UART1) |
+ BIT(SYS_CTRL_RST_UART2) |
+ BIT(SYS_CTRL_RST_MISC) |
+ BIT(SYS_CTRL_RST_I2S) |
+ BIT(SYS_CTRL_RST_SD) |
+ BIT(SYS_CTRL_RST_MACB) |
+ BIT(SYS_CTRL_RST_PCIEB) |
+ BIT(SYS_CTRL_RST_VIDEO) |
+ BIT(SYS_CTRL_RST_USBHSPHYB) |
+ BIT(SYS_CTRL_RST_USBDEV);
+
+ writel(value, SYS_CTRL_RST_SET_CTRL);
+
+ /* Release reset to cores as per power on defaults */
+ writel(BIT(SYS_CTRL_RST_GPIO), SYS_CTRL_RST_CLR_CTRL);
+
+ /* Disable clocks to cores as per power-on defaults - must leave DDR
+ * related clocks enabled otherwise we'll stop rather abruptly. */
+ value =
+ BIT(SYS_CTRL_CLK_COPRO) |
+ BIT(SYS_CTRL_CLK_DMA) |
+ BIT(SYS_CTRL_CLK_CIPHER) |
+ BIT(SYS_CTRL_CLK_SD) |
+ BIT(SYS_CTRL_CLK_SATA) |
+ BIT(SYS_CTRL_CLK_I2S) |
+ BIT(SYS_CTRL_CLK_USBHS) |
+ BIT(SYS_CTRL_CLK_MAC) |
+ BIT(SYS_CTRL_CLK_PCIEA) |
+ BIT(SYS_CTRL_CLK_STATIC) |
+ BIT(SYS_CTRL_CLK_MACB) |
+ BIT(SYS_CTRL_CLK_PCIEB) |
+ BIT(SYS_CTRL_CLK_REF600) |
+ BIT(SYS_CTRL_CLK_USBDEV);
+
+ writel(value, SYS_CTRL_CLK_CLR_CTRL);
+
+ /* Enable clocks to cores as per power-on defaults */
+
+ /* Set sys-control pin mux'ing as per power-on defaults */
+ writel(0, SYS_CTRL_SECONDARY_SEL);
+ writel(0, SYS_CTRL_TERTIARY_SEL);
+ writel(0, SYS_CTRL_QUATERNARY_SEL);
+ writel(0, SYS_CTRL_DEBUG_SEL);
+ writel(0, SYS_CTRL_ALTERNATIVE_SEL);
+ writel(0, SYS_CTRL_PULLUP_SEL);
+
+ writel(0, SYS_CTRL_SECONDARY_SEL);
+ writel(0, SYS_CTRL_TERTIARY_SEL);
+ writel(0, SYS_CTRL_QUATERNARY_SEL);
+ writel(0, SYS_CTRL_DEBUG_SEL);
+ writel(0, SYS_CTRL_ALTERNATIVE_SEL);
+ writel(0, SYS_CTRL_PULLUP_SEL);
+
+ /* No need to save any state, as the ROM loader can determine whether
+ * reset is due to power cycling or programatic action, just hit the
+ * (self-clearing) CPU reset bit of the block reset register */
+ value =
+ BIT(SYS_CTRL_RST_SCU) |
+ BIT(SYS_CTRL_RST_ARM0) |
+ BIT(SYS_CTRL_RST_ARM1);
+
+ writel(value, SYS_CTRL_RST_SET_CTRL);
+}
+
+static const char * const ox820_dt_board_compat[] = {
+ "plxtech,nas7820",
+ "plxtech,nas7821",
+ "plxtech,nas7825",
+ NULL
+};
+
+DT_MACHINE_START(OX820_DT, "PLXTECH NAS782X SoC (Flattened Device Tree)")
+ .map_io = ox820_map_common_io,
+ .smp = smp_ops(ox820_smp_ops),
+ .init_early = ox820_init_early,
+ .init_time = ox820_timer_init,
+ .init_machine = ox820_dt_init,
+ .restart = ox820_assert_system_reset,
+ .dt_compat = ox820_dt_board_compat,
+MACHINE_END
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c
new file mode 100644
index 0000000000..c41a3d1d16
--- /dev/null
+++ b/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c
@@ -0,0 +1,315 @@
+/*
+ * arch/arm/mach-ox820/platsmp.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/cache.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/tlbflush.h>
+#include <asm/cputype.h>
+#include <linux/delay.h>
+#include <asm/fiq.h>
+
+#include <linux/irqchip/arm-gic.h>
+#include <mach/iomap.h>
+#include <mach/smp.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#ifdef CONFIG_DMA_CACHE_FIQ_BROADCAST
+
+#define FIQ_GENERATE 0x00000002
+#define OXNAS_MAP_AREA 0x01000000
+#define OXNAS_UNMAP_AREA 0x02000000
+#define OXNAS_FLUSH_RANGE 0x03000000
+
+struct fiq_req {
+ union {
+ struct {
+ const void *addr;
+ size_t size;
+ } map;
+ struct {
+ const void *addr;
+ size_t size;
+ } unmap;
+ struct {
+ const void *start;
+ const void *end;
+ } flush;
+ };
+ volatile uint flags;
+ void __iomem *reg;
+} ____cacheline_aligned;
+
+static struct fiq_handler fh = {
+ .name = "oxnas-fiq"
+};
+
+DEFINE_PER_CPU(struct fiq_req, fiq_data);
+
+static inline void __cpuinit ox820_set_fiq_regs(unsigned int cpu)
+{
+ struct pt_regs FIQ_regs;
+ struct fiq_req *fiq_req = &per_cpu(fiq_data, !cpu);
+
+ FIQ_regs.ARM_r8 = 0;
+ FIQ_regs.ARM_ip = (unsigned int)fiq_req;
+ FIQ_regs.ARM_sp = (int)(cpu ? RPSC_IRQ_SOFT : RPSA_IRQ_SOFT);
+ fiq_req->reg = cpu ? RPSC_IRQ_SOFT : RPSA_IRQ_SOFT;
+
+ set_fiq_regs(&FIQ_regs);
+}
+
+static void __init ox820_init_fiq(void)
+{
+ void *fiqhandler_start;
+ unsigned int fiqhandler_length;
+ int ret;
+
+ fiqhandler_start = &ox820_fiq_start;
+ fiqhandler_length = &ox820_fiq_end - &ox820_fiq_start;
+
+ ret = claim_fiq(&fh);
+
+ if (ret)
+ return;
+
+ set_fiq_handler(fiqhandler_start, fiqhandler_length);
+
+ writel(IRQ_SOFT, RPSA_FIQ_IRQ_TO_FIQ);
+ writel(1, RPSA_FIQ_ENABLE);
+ writel(IRQ_SOFT, RPSC_FIQ_IRQ_TO_FIQ);
+ writel(1, RPSC_FIQ_ENABLE);
+}
+
+void fiq_dma_map_area(const void *addr, size_t size, int dir)
+{
+ unsigned long flags;
+ struct fiq_req *req;
+
+ raw_local_irq_save(flags);
+ /* currently, not possible to take cpu0 down, so only check cpu1 */
+ if (!cpu_online(1)) {
+ raw_local_irq_restore(flags);
+ v6_dma_map_area(addr, size, dir);
+ return;
+ }
+
+ req = this_cpu_ptr(&fiq_data);
+ req->map.addr = addr;
+ req->map.size = size;
+ req->flags = dir | OXNAS_MAP_AREA;
+ smp_mb();
+
+ writel_relaxed(FIQ_GENERATE, req->reg);
+
+ v6_dma_map_area(addr, size, dir);
+ while (req->flags)
+ barrier();
+
+ raw_local_irq_restore(flags);
+}
+
+void fiq_dma_unmap_area(const void *addr, size_t size, int dir)
+{
+ unsigned long flags;
+ struct fiq_req *req;
+
+ raw_local_irq_save(flags);
+ /* currently, not possible to take cpu0 down, so only check cpu1 */
+ if (!cpu_online(1)) {
+ raw_local_irq_restore(flags);
+ v6_dma_unmap_area(addr, size, dir);
+ return;
+ }
+
+ req = this_cpu_ptr(&fiq_data);
+ req->unmap.addr = addr;
+ req->unmap.size = size;
+ req->flags = dir | OXNAS_UNMAP_AREA;
+ smp_mb();
+
+ writel_relaxed(FIQ_GENERATE, req->reg);
+
+ v6_dma_unmap_area(addr, size, dir);
+ while (req->flags)
+ barrier();
+
+ raw_local_irq_restore(flags);
+}
+
+void fiq_dma_flush_range(const void *start, const void *end)
+{
+ unsigned long flags;
+ struct fiq_req *req;
+
+ raw_local_irq_save(flags);
+ /* currently, not possible to take cpu0 down, so only check cpu1 */
+ if (!cpu_online(1)) {
+ raw_local_irq_restore(flags);
+ v6_dma_flush_range(start, end);
+ return;
+ }
+
+ req = this_cpu_ptr(&fiq_data);
+
+ req->flush.start = start;
+ req->flush.end = end;
+ req->flags = OXNAS_FLUSH_RANGE;
+ smp_mb();
+
+ writel_relaxed(FIQ_GENERATE, req->reg);
+
+ v6_dma_flush_range(start, end);
+
+ while (req->flags)
+ barrier();
+
+ raw_local_irq_restore(flags);
+}
+
+void fiq_flush_kern_dcache_area(void *addr, size_t size)
+{
+ fiq_dma_flush_range(addr, addr + size);
+}
+#else
+
+#define ox820_set_fiq_regs(cpu) do {} while (0) /* nothing */
+#define ox820_init_fiq() do {} while (0) /* nothing */
+
+#endif /* DMA_CACHE_FIQ_BROADCAST */
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit ox820_secondary_init(unsigned int cpu)
+{
+ /*
+ * Setup Secondary Core FIQ regs
+ */
+ ox820_set_fiq_regs(1);
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ write_pen_release(-1);
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit ox820_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * Set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * This is really belt and braces; we hold unintended secondary
+ * CPUs in the holding pen until we're ready for them. However,
+ * since we haven't sent them a soft interrupt, they shouldn't
+ * be there.
+ */
+ write_pen_release(cpu);
+
+ writel(1, IOMEM(OXNAS_GICN_BASE_VA(cpu) + GIC_CPU_CTRL));
+
+ /*
+ * Send the secondary CPU a soft interrupt, thereby causing
+ * the boot monitor to read the system wide flags register,
+ * and branch to the address found there.
+ */
+
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ smp_rmb();
+ if (read_pen_release() == -1)
+ break;
+
+ udelay(10);
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return read_pen_release() != -1 ? -ENOSYS : 0;
+}
+
+void *scu_base_addr(void)
+{
+ return IOMEM(OXNAS_SCU_BASE_VA);
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+static void __init ox820_smp_init_cpus(void)
+{
+ void __iomem *scu_base = scu_base_addr();
+ unsigned int i, ncores;
+
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+ /* sanity check */
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+static void __init ox820_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+ scu_enable(scu_base_addr());
+
+ /*
+ * Write the address of secondary startup into the
+ * system-wide flags register. The BootMonitor waits
+ * until it receives a soft interrupt, and then the
+ * secondary CPU branches to this address.
+ */
+ writel(virt_to_phys(ox820_secondary_startup),
+ HOLDINGPEN_LOCATION);
+ ox820_init_fiq();
+
+ ox820_set_fiq_regs(0);
+}
+
+struct smp_operations ox820_smp_ops __initdata = {
+ .smp_init_cpus = ox820_smp_init_cpus,
+ .smp_prepare_cpus = ox820_smp_prepare_cpus,
+ .smp_secondary_init = ox820_secondary_init,
+ .smp_boot_secondary = ox820_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = ox820_cpu_die,
+#endif
+};
diff --git a/target/linux/oxnas/files/drivers/ata/sata_oxnas.c b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c
new file mode 100644
index 0000000000..b3685bdda0
--- /dev/null
+++ b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c
@@ -0,0 +1,1889 @@
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/of_platform.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+
+#include <mach/utils.h>
+
+/* sgdma request structure */
+struct sgdma_request {
+ volatile u32 qualifier;
+ volatile u32 control;
+ dma_addr_t src_pa;
+ dma_addr_t dst_pa;
+} __packed __aligned(4);
+
+
+/* Controller information */
+enum {
+ SATA_OXNAS_MAX_PRD = 254,
+ SATA_OXNAS_DMA_SIZE = SATA_OXNAS_MAX_PRD *
+ sizeof(struct ata_bmdma_prd) +
+ sizeof(struct sgdma_request),
+ SATA_OXNAS_MAX_PORTS = 1,
+ /** The different Oxsemi SATA core version numbers */
+ SATA_OXNAS_CORE_VERSION = 0x1f3,
+ SATA_OXNAS_IRQ_FLAG = IRQF_SHARED,
+ SATA_OXNAS_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
+ ATA_FLAG_NO_ATAPI /*| ATA_FLAG_NCQ*/),
+ SATA_OXNAS_QUEUE_DEPTH = 32,
+
+ SATA_OXNAS_DMA_BOUNDARY = 0xFFFFFFFF,
+};
+
+
+/*
+ * SATA Port Registers
+ */
+enum {
+ /** sata host port register offsets */
+ ORB1 = 0x00,
+ ORB2 = 0x04,
+ ORB3 = 0x08,
+ ORB4 = 0x0C,
+ ORB5 = 0x10,
+ MASTER_STATUS = 0x10,
+ FIS_CTRL = 0x18,
+ FIS_DATA = 0x1C,
+ INT_STATUS = 0x30,
+ INT_CLEAR = 0x30,
+ INT_ENABLE = 0x34,
+ INT_DISABLE = 0x38,
+ VERSION = 0x3C,
+ SATA_CONTROL = 0x5C,
+ SATA_COMMAND = 0x60,
+ HID_FEATURES = 0x64,
+ PORT_CONTROL = 0x68,
+ DRIVE_CONTROL = 0x6C,
+ /** These registers allow access to the link layer registers
+ that reside in a different clock domain to the processor bus */
+ LINK_DATA = 0x70,
+ LINK_RD_ADDR = 0x74,
+ LINK_WR_ADDR = 0x78,
+ LINK_CONTROL = 0x7C,
+ /* window control */
+ WIN1LO = 0x80,
+ WIN1HI = 0x84,
+ WIN2LO = 0x88,
+ WIN2HI = 0x8C,
+ WIN0_CONTROL = 0x90,
+
+};
+
+/** sata port register bits */
+enum{
+ /**
+ * commands to issue in the master status to tell it to move shadow ,
+ * registers to the actual device ,
+ */
+ SATA_OPCODE_MASK = 0x00000007,
+ CMD_WRITE_TO_ORB_REGS_NO_COMMAND = 0x4,
+ CMD_WRITE_TO_ORB_REGS = 0x2,
+ CMD_SYNC_ESCAPE = 0x7,
+ CMD_CORE_BUSY = (1 << 7),
+ CMD_DRIVE_SELECT_SHIFT = 12,
+ CMD_DRIVE_SELECT_MASK = (0xf << CMD_DRIVE_SELECT_SHIFT),
+
+ /** interrupt bits */
+ INT_END_OF_CMD = 1 << 0,
+ INT_LINK_SERROR = 1 << 1,
+ INT_ERROR = 1 << 2,
+ INT_LINK_IRQ = 1 << 3,
+ INT_REG_ACCESS_ERR = 1 << 7,
+ INT_BIST_FIS = 1 << 11,
+ INT_MASKABLE = INT_END_OF_CMD |
+ INT_LINK_SERROR |
+ INT_ERROR |
+ INT_LINK_IRQ |
+ INT_REG_ACCESS_ERR |
+ INT_BIST_FIS,
+ INT_WANT = INT_END_OF_CMD |
+ INT_LINK_SERROR |
+ INT_REG_ACCESS_ERR |
+ INT_ERROR,
+ INT_ERRORS = INT_LINK_SERROR |
+ INT_REG_ACCESS_ERR |
+ INT_ERROR,
+
+ /** raw interrupt bits, unmaskable, but do not generate interrupts */
+ RAW_END_OF_CMD = INT_END_OF_CMD << 16,
+ RAW_LINK_SERROR = INT_LINK_SERROR << 16,
+ RAW_ERROR = INT_ERROR << 16,
+ RAW_LINK_IRQ = INT_LINK_IRQ << 16,
+ RAW_REG_ACCESS_ERR = INT_REG_ACCESS_ERR << 16,
+ RAW_BIST_FIS = INT_BIST_FIS << 16,
+ RAW_WANT = INT_WANT << 16,
+ RAW_ERRORS = INT_ERRORS << 16,
+
+ /**
+ * variables to write to the device control register to set the current
+ * device, ie. master or slave.
+ */
+ DR_CON_48 = 2,
+ DR_CON_28 = 0,
+
+ SATA_CTL_ERR_MASK = 0x00000016,
+
+};
+
+/* ATA SGDMA register offsets */
+enum {
+ SGDMA_CONTROL = 0x0,
+ SGDMA_STATUS = 0x4,
+ SGDMA_REQUESTPTR = 0x8,
+ SGDMA_RESETS = 0xC,
+ SGDMA_CORESIZE = 0x10,
+};
+
+enum {
+ /* see DMA core docs for the values. Out means from memory (bus A) out
+ * to disk (bus B) */
+ SGDMA_REQCTL0OUT = 0x0497c03d,
+ /* burst mode disabled when no micro code used */
+ SGDMA_REQCTL0IN = 0x0493a3c1,
+ SGDMA_REQCTL1OUT = 0x0497c07d,
+ SGDMA_REQCTL1IN = 0x0497a3c5,
+ SGDMA_CONTROL_NOGO = 0x3e,
+ SGDMA_CONTROL_GO = SGDMA_CONTROL_NOGO | 1,
+ SGDMA_ERRORMASK = 0x3f,
+ SGDMA_BUSY = 0x80,
+
+ SGDMA_RESETS_CTRL = 1 << 0,
+ SGDMA_RESETS_ARBT = 1 << 1,
+ SGDMA_RESETS_AHB = 1 << 2,
+ SGDMA_RESETS_ALL = SGDMA_RESETS_CTRL |
+ SGDMA_RESETS_ARBT |
+ SGDMA_RESETS_AHB,
+
+ /* Final EOTs */
+ SGDMA_REQQUAL = 0x00220001,
+
+};
+
+/** SATA core register offsets */
+enum {
+ DM_DBG1 = 0x000,
+ RAID_SET = 0x004,
+ DM_DBG2 = 0x008,
+ DATACOUNT_PORT0 = 0x010,
+ DATACOUNT_PORT1 = 0x014,
+ CORE_INT_STATUS = 0x030,
+ CORE_INT_CLEAR = 0x030,
+ CORE_INT_ENABLE = 0x034,
+ CORE_INT_DISABLE = 0x038,
+ CORE_REBUILD_ENABLE = 0x050,
+ CORE_FAILED_PORT_R = 0x054,
+ DEVICE_CONTROL = 0x068,
+ EXCESS = 0x06C,
+ RAID_SIZE_LOW = 0x070,
+ RAID_SIZE_HIGH = 0x074,
+ PORT_ERROR_MASK = 0x078,
+ IDLE_STATUS = 0x07C,
+ RAID_CONTROL = 0x090,
+ DATA_PLANE_CTRL = 0x0AC,
+ CORE_DATAPLANE_STAT = 0x0b8,
+ PROC_PC = 0x100,
+ CONFIG_IN = 0x3d8,
+ PROC_START = 0x3f0,
+ PROC_RESET = 0x3f4,
+ UCODE_STORE = 0x1000,
+ RAID_WP_BOT_LOW = 0x1FF0,
+ RAID_WP_BOT_HIGH = 0x1FF4,
+ RAID_WP_TOP_LOW = 0x1FF8,
+ RAID_WP_TOP_HIGH = 0x1FFC,
+ DATA_MUX_RAM0 = 0x8000,
+ DATA_MUX_RAM1 = 0xA000,
+};
+
+enum {
+ /* Sata core debug1 register bits */
+ CORE_PORT0_DATA_DIR_BIT = 20,
+ CORE_PORT1_DATA_DIR_BIT = 21,
+ CORE_PORT0_DATA_DIR = 1 << CORE_PORT0_DATA_DIR_BIT,
+ CORE_PORT1_DATA_DIR = 1 << CORE_PORT1_DATA_DIR_BIT,
+
+ /** sata core control register bits */
+ SCTL_CLR_ERR = 0x00003016,
+ RAID_CLR_ERR = 0x0000011e,
+
+ /* Interrupts direct from the ports */
+ NORMAL_INTS_WANTED = 0x00000303,
+
+ /* shift these left by port number */
+ COREINT_HOST = 0x00000001,
+ COREINT_END = 0x00000100,
+ CORERAW_HOST = COREINT_HOST << 16,
+ CORERAW_END = COREINT_END << 16,
+
+ /* Interrupts from the RAID controller only */
+ RAID_INTS_WANTED = 0x00008300,
+
+ /* The bits in the IDLE_STATUS that, when set indicate an idle core */
+ IDLE_CORES = (1 << 18) | (1 << 19),
+
+ /* Data plane control error-mask mask and bit, these bit in the data
+ * plane control mask out errors from the ports that prevent the SGDMA
+ * care from sending an interrupt */
+ DPC_ERROR_MASK = 0x00000300,
+ DPC_ERROR_MASK_BIT = 0x00000100,
+ /* enable jbod micro-code */
+ DPC_JBOD_UCODE = 1 << 0,
+ DPC_FIS_SWCH = 1 << 1,
+
+ /** Device Control register bits */
+ DEVICE_CONTROL_DMABT = 1 << 4,
+ DEVICE_CONTROL_ABORT = 1 << 2,
+ DEVICE_CONTROL_PAD = 1 << 3,
+ DEVICE_CONTROL_PADPAT = 1 << 16,
+ DEVICE_CONTROL_PRTRST = 1 << 8,
+ DEVICE_CONTROL_RAMRST = 1 << 12,
+ DEVICE_CONTROL_ATA_ERR_OVERRIDE = 1 << 28,
+
+ /** oxsemi HW raid modes */
+ OXNASSATA_NOTRAID = 0,
+ OXNASSATA_RAID0 = 1,
+ OXNASSATA_RAID1 = 2,
+ /** OX820 specific HW-RAID register values */
+ RAID_TWODISKS = 3,
+ UNKNOWN_MODE = ~0,
+};
+
+/* SATA PHY Registers */
+enum {
+ PHY_STAT = 0x00,
+ PHY_DATA = 0x04,
+};
+
+enum {
+ STAT_READ_VALID = (1 << 21),
+ STAT_CR_ACK = (1 << 20),
+ STAT_CR_READ = (1 << 19),
+ STAT_CR_WRITE = (1 << 18),
+ STAT_CAP_DATA = (1 << 17),
+ STAT_CAP_ADDR = (1 << 16),
+
+ STAT_ACK_ANY = STAT_CR_ACK |
+ STAT_CR_READ |
+ STAT_CR_WRITE |
+ STAT_CAP_DATA |
+ STAT_CAP_ADDR,
+
+ CR_READ_ENABLE = (1 << 16),
+ CR_WRITE_ENABLE = (1 << 17),
+ CR_CAP_DATA = (1 << 18),
+};
+
+enum {
+ /* Link layer registers */
+ SERROR_IRQ_MASK = 5,
+};
+
+enum {
+ OXNAS_SATA_SOFTRESET = 1,
+ OXNAS_SATA_REINIT = 2,
+};
+
+enum {
+ OXNAS_SATA_UCODE_RAID0,
+ OXNAS_SATA_UCODE_RAID1,
+ OXNAS_SATA_UCODE_JBOD,
+ OXNAS_SATA_UCODE_NONE,
+};
+
+struct sata_oxnas_host_priv {
+ void __iomem *port_base[SATA_OXNAS_MAX_PORTS];
+ void __iomem *sgdma_base[SATA_OXNAS_MAX_PORTS];
+ void __iomem *core_base;
+ void __iomem *phy_base;
+ dma_addr_t dma_base;
+ void __iomem *dma_base_va;
+ size_t dma_size;
+ int irq;
+ u32 port_in_eh;
+ struct clk *clk;
+ struct reset_control *rst_sata;
+ struct reset_control *rst_link;
+ struct reset_control *rst_phy;
+};
+
+
+struct sata_oxnas_port_priv {
+ void __iomem *port_base;
+ void __iomem *sgdma_base;
+ void __iomem *core_base;
+ struct sgdma_request *sgdma_request;
+ dma_addr_t sgdma_request_pa;
+};
+
+static u8 sata_oxnas_check_status(struct ata_port *ap);
+static int sata_oxnas_cleanup(struct ata_host *ah);
+static void sata_oxnas_tf_load(struct ata_port *ap,
+ const struct ata_taskfile *tf);
+static void sata_oxnas_irq_on(struct ata_port *ap);
+static void sata_oxnas_post_reset_init(struct ata_port *ap);
+
+/* ??????????????????????????????????? */
+static void wait_cr_ack(void __iomem *phy_base)
+{
+ while ((ioread32(phy_base + PHY_STAT) >> 16) & 0x1f)
+ ; /* wait for an ack bit to be set */
+}
+
+static u16 read_cr(void __iomem *phy_base, u16 address)
+{
+ iowrite32((u32)address, phy_base + PHY_STAT);
+ wait_cr_ack(phy_base);
+ iowrite32(CR_READ_ENABLE, phy_base + PHY_DATA);
+ wait_cr_ack(phy_base);
+ return (u16)ioread32(phy_base + PHY_STAT);
+}
+
+static void write_cr(void __iomem *phy_base, u16 data, u16 address)
+{
+ iowrite32((u32)address, phy_base + PHY_STAT);
+ wait_cr_ack(phy_base);
+ iowrite32((data | CR_CAP_DATA), phy_base + PHY_DATA);
+ wait_cr_ack(phy_base);
+ iowrite32(CR_WRITE_ENABLE, phy_base + PHY_DATA);
+ wait_cr_ack(phy_base);
+}
+
+#define PH_GAIN 2
+#define FR_GAIN 3
+#define PH_GAIN_OFFSET 6
+#define FR_GAIN_OFFSET 8
+#define PH_GAIN_MASK (0x3 << PH_GAIN_OFFSET)
+#define FR_GAIN_MASK (0x3 << FR_GAIN_OFFSET)
+#define USE_INT_SETTING (1<<5)
+
+void workaround5458(struct ata_host *ah)
+{
+ struct sata_oxnas_host_priv *hd = ah->private_data;
+ void __iomem *phy_base = hd->phy_base;
+ u16 rx_control;
+ unsigned i;
+
+ for (i = 0; i < 2; i++) {
+ rx_control = read_cr(phy_base, 0x201d + (i << 8));
+ rx_control &= ~(PH_GAIN_MASK | FR_GAIN_MASK);
+ rx_control |= PH_GAIN << PH_GAIN_OFFSET;
+ rx_control |= (FR_GAIN << FR_GAIN_OFFSET) | USE_INT_SETTING;
+ write_cr(phy_base, rx_control, 0x201d+(i<<8));
+ }
+}
+
+/**
+ * allows access to the link layer registers
+ * @param link_reg the link layer register to access (oxsemi indexing ie
+ * 00 = static config, 04 = phy ctrl)
+ */
+void sata_oxnas_link_write(struct ata_port *ap, unsigned int link_reg, u32 val)
+{
+ struct sata_oxnas_port_priv *port_priv = ap->private_data;
+ void __iomem *port_base = port_priv->port_base;
+ u32 patience;
+
+ DPRINTK("[0x%02x]->0x%08x\n", link_reg, val);
+
+ iowrite32(val, port_base + LINK_DATA);
+
+ /* accessed twice as a work around for a bug in the SATA abp bridge
+ * hardware (bug 6828) */
+ iowrite32(link_reg , port_base + LINK_WR_ADDR);
+ ioread32(port_base + LINK_WR_ADDR);
+
+ for (patience = 0x100000; patience > 0; --patience) {
+ if (ioread32(port_base + LINK_CONTROL) & 0x00000001)
+ break;
+ }
+}
+
+static int sata_oxnas_scr_write_port(struct ata_port *ap, unsigned int sc_reg,
+ u32 val)
+{
+ sata_oxnas_link_write(ap, 0x20 + (sc_reg * 4), val);
+ return 0;
+}
+
+static int sata_oxnas_scr_write(struct ata_link *link, unsigned int sc_reg,
+ u32 val)
+{
+ return sata_oxnas_scr_write_port(link->ap, sc_reg, val);
+}
+
+/* FIXME lock */
+u32 sata_oxnas_link_read(struct ata_port *ap, unsigned int link_reg)
+{
+ struct sata_oxnas_port_priv *pd = ap->private_data;
+ void __iomem *port_base = pd->port_base;
+ u32 result;
+ u32 patience;
+
+ /* accessed twice as a work around for a bug in the SATA abp bridge
+ * hardware (bug 6828) */
+ iowrite32(link_reg, port_base + LINK_RD_ADDR);
+ ioread32(port_base + LINK_RD_ADDR);
+
+ for (patience = 0x100000; patience > 0; --patience) {
+ if (ioread32(port_base + LINK_CONTROL) & 0x00000001)
+ break;
+ }
+ if (patience == 0)
+ DPRINTK("link read timed out\n");
+
+ result = readl(port_base + LINK_DATA);
+
+ return result;
+}
+
+static int sata_oxnas_scr_read_port(struct ata_port *ap, unsigned int sc_reg,
+ u32 *val)
+{
+ *val = sata_oxnas_link_read(ap, 0x20 + (sc_reg*4));
+ return 0;
+}
+
+static int sata_oxnas_scr_read(struct ata_link *link,
+ unsigned int sc_reg, u32 *val)
+{
+
+ return sata_oxnas_scr_read_port(link->ap, sc_reg, val);
+}
+
+/**
+ * sata_oxnas_irq_clear is called during probe just before the interrupt handler is
+ * registered, to be sure hardware is quiet. It clears and masks interrupt bits
+ * in the SATA core.
+ *
+ * @param ap hardware with the registers in
+ */
+static void sata_oxnas_irq_clear(struct ata_port *ap)
+{
+ struct sata_oxnas_port_priv *port_priv = ap->private_data;
+
+ /* clear pending interrupts */
+ iowrite32(~0, port_priv->port_base + INT_CLEAR);
+ iowrite32(COREINT_END, port_priv->core_base + CORE_INT_CLEAR);
+}
+
+/**
+ * qc_issue is used to make a command active, once the hardware and S/G tables
+ * have been prepared. IDE BMDMA drivers use the helper function
+ * ata_qc_issue_prot() for taskfile protocol-based dispatch. More advanced
+ * drivers roll their own ->qc_issue implementation, using this as the
+ * "issue new ATA command to hardware" hook.
+ * @param qc the queued command to issue
+ */
+static unsigned int sata_oxnas_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct sata_oxnas_port_priv *pd = qc->ap->private_data;
+ void __iomem *port_base = pd->port_base;
+ void __iomem *core_base = pd->core_base;
+ int port_no = qc->ap->port_no;
+ u32 reg;
+
+ /* check the core is idle */
+ if (ioread32(port_base + SATA_COMMAND) & CMD_CORE_BUSY) {
+ int count = 0;
+
+ DPRINTK("core busy for a command on port %d\n",
+ qc->ap->port_no);
+ do {
+ mdelay(1);
+ if (++count > 100) {
+ DPRINTK("core busy for a command on port %d\n",
+ qc->ap->port_no);
+ /* CrazyDumpDebug(); */
+ sata_oxnas_cleanup(qc->ap->host);
+ }
+ } while (ioread32(port_base + SATA_COMMAND) & CMD_CORE_BUSY);
+ }
+
+ /* enable passing of error signals to DMA sub-core by clearing the
+ * appropriate bit (all transfers are on dma channel 0) */
+ reg = ioread32(core_base + DATA_PLANE_CTRL);
+ reg &= ~(DPC_ERROR_MASK_BIT << port_no);
+ iowrite32(reg, core_base + DATA_PLANE_CTRL);
+
+ /* Disable all interrupts for ports and RAID controller */
+ iowrite32(~0, port_base + INT_DISABLE);
+
+ /* Disable all interrupts for core */
+ iowrite32(~0, core_base + CORE_INT_DISABLE);
+ wmb();
+
+ /* Load the command settings into the orb registers */
+ sata_oxnas_tf_load(qc->ap, &qc->tf);
+
+ /* both pio and dma commands use dma */
+ if (ata_is_dma(qc->tf.protocol) || ata_is_pio(qc->tf.protocol)) {
+ /* Start the DMA */
+ iowrite32(SGDMA_CONTROL_GO, pd->sgdma_base + SGDMA_CONTROL);
+ wmb();
+ }
+
+ /* enable End of command interrupt */
+ iowrite32(INT_WANT, port_base + INT_ENABLE);
+ iowrite32(COREINT_END, core_base + CORE_INT_ENABLE);
+ wmb();
+
+ /* Start the command */
+ reg = ioread32(port_base + SATA_COMMAND);
+ reg &= ~SATA_OPCODE_MASK;
+ reg |= CMD_WRITE_TO_ORB_REGS;
+ iowrite32(reg , port_base + SATA_COMMAND);
+ wmb();
+
+ return 0;
+}
+
+/**
+ * Will schedule the libATA error handler on the premise that there has
+ * been a hotplug event on the port specified
+ */
+void sata_oxnas_checkforhotplug(struct ata_port *ap)
+{
+ DPRINTK("ENTER\n");
+
+ ata_ehi_hotplugged(&ap->link.eh_info);
+ ata_port_freeze(ap);
+}
+
+
+static inline int sata_oxnas_is_host_frozen(struct ata_host *ah)
+{
+ struct sata_oxnas_host_priv *hd = ah->private_data;
+
+ smp_rmb();
+ return hd->port_in_eh;
+}
+
+static inline u32 sata_oxnas_hostportbusy(struct ata_port *ap)
+{
+ struct sata_oxnas_port_priv *pd = ap->private_data;
+
+ return ioread32(pd->port_base + SATA_COMMAND) & CMD_CORE_BUSY;
+}
+
+static inline u32 sata_oxnas_hostdmabusy(struct ata_port *ap)
+{
+ struct sata_oxnas_port_priv *pd = ap->private_data;
+
+ return ioread32(pd->sgdma_base + SGDMA_STATUS) & SGDMA_BUSY;
+}
+
+
+/**
+ * Turns on the cores clock and resets it
+ */
+static void sata_oxnas_reset_core(struct ata_host *ah)
+{
+ struct sata_oxnas_host_priv *host_priv = ah->private_data;
+
+ DPRINTK("ENTER\n");
+ clk_prepare_enable(host_priv->clk);
+
+ reset_control_assert(host_priv->rst_sata);
+ reset_control_assert(host_priv->rst_link);
+ reset_control_assert(host_priv->rst_phy);
+
+ udelay(50);
+
+ /* un-reset the PHY, then Link and Controller */
+ reset_control_deassert(host_priv->rst_phy);
+ udelay(50);
+
+ reset_control_deassert(host_priv->rst_sata);
+ reset_control_deassert(host_priv->rst_link);
+ udelay(50);
+
+ workaround5458(ah);
+ /* tune for sata compatability */
+ sata_oxnas_link_write(ah->ports[0], 0x60, 0x2988);
+
+ /* each port in turn */
+ sata_oxnas_link_write(ah->ports[0], 0x70, 0x55629);
+ udelay(50);
+}
+
+
+/**
+ * Called after an identify device command has worked out what kind of device
+ * is on the port
+ *
+ * @param port The port to configure
+ * @param pdev The hardware associated with controlling the port
+ */
+static void sata_oxnas_dev_config(struct ata_device *pdev)
+{
+ struct sata_oxnas_port_priv *pd = pdev->link->ap->private_data;
+ void __iomem *port_base = pd->port_base;
+ u32 reg;
+
+ DPRINTK("ENTER\n");
+ /* Set the bits to put the port into 28 or 48-bit node */
+ reg = ioread32(port_base + DRIVE_CONTROL);
+ reg &= ~3;
+ reg |= (pdev->flags & ATA_DFLAG_LBA48) ? DR_CON_48 : DR_CON_28;
+ iowrite32(reg, port_base + DRIVE_CONTROL);
+
+ /* if this is an ATA-6 disk, put port into ATA-5 auto translate mode */
+ if (pdev->flags & ATA_DFLAG_LBA48) {
+ reg = ioread32(port_base + PORT_CONTROL);
+ reg |= 2;
+ iowrite32(reg, port_base + PORT_CONTROL);
+ }
+}
+/**
+ * called to write a taskfile into the ORB registers
+ * @param ap hardware with the registers in
+ * @param tf taskfile to write to the registers
+ */
+static void sata_oxnas_tf_load(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ u32 count = 0;
+ u32 Orb1 = 0;
+ u32 Orb2 = 0;
+ u32 Orb3 = 0;
+ u32 Orb4 = 0;
+ u32 Command_Reg;
+
+ struct sata_oxnas_port_priv *port_priv = ap->private_data;
+ void __iomem *port_base = port_priv->port_base;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ /* wait a maximum of 10ms for the core to be idle */
+ do {
+ Command_Reg = ioread32(port_base + SATA_COMMAND);
+ if (!(Command_Reg & CMD_CORE_BUSY))
+ break;
+ count++;
+ udelay(50);
+ } while (count < 200);
+
+ /* check if the ctl register has interrupts disabled or enabled and
+ * modify the interrupt enable registers on the ata core as required */
+ if (tf->ctl & ATA_NIEN) {
+ /* interrupts disabled */
+ u32 mask = (COREINT_END << ap->port_no);
+
+ iowrite32(mask, port_priv->core_base + CORE_INT_DISABLE);
+ sata_oxnas_irq_clear(ap);
+ } else {
+ sata_oxnas_irq_on(ap);
+ }
+
+ Orb2 |= (tf->command) << 24;
+
+ /* write 48 or 28 bit tf parameters */
+ if (is_addr) {
+ /* set LBA bit as it's an address */
+ Orb1 |= (tf->device & ATA_LBA) << 24;
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ Orb1 |= ATA_LBA << 24;
+ Orb2 |= (tf->hob_nsect) << 8;
+ Orb3 |= (tf->hob_lbal) << 24;
+ Orb4 |= (tf->hob_lbam) << 0;
+ Orb4 |= (tf->hob_lbah) << 8;
+ Orb4 |= (tf->hob_feature) << 16;
+ } else {
+ Orb3 |= (tf->device & 0xf) << 24;
+ }
+
+ /* write 28-bit lba */
+ Orb2 |= (tf->nsect) << 0;
+ Orb2 |= (tf->feature) << 16;
+ Orb3 |= (tf->lbal) << 0;
+ Orb3 |= (tf->lbam) << 8;
+ Orb3 |= (tf->lbah) << 16;
+ Orb4 |= (tf->ctl) << 24;
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE)
+ Orb1 |= (tf->device) << 24;
+
+ ap->last_ctl = tf->ctl;
+
+ /* write values to registers */
+ iowrite32(Orb1, port_base + ORB1);
+ iowrite32(Orb2, port_base + ORB2);
+ iowrite32(Orb3, port_base + ORB3);
+ iowrite32(Orb4, port_base + ORB4);
+}
+
+
+void sata_oxnas_set_mode(struct ata_port *ap, u32 mode, u32 force)
+{
+ struct sata_oxnas_port_priv *port_priv = ap->private_data;
+ void __iomem *core_base = port_priv->core_base;
+
+ unsigned int *src;
+ void __iomem *dst;
+ unsigned int progmicrocode = 0;
+ unsigned int changeparameters = 0;
+ static u32 previous_mode = UNKNOWN_MODE;
+
+ /* these micro-code programs _should_ include the version word */
+
+ /* JBOD */
+ static const unsigned int jbod[] = {
+ 0x07B400AC, 0x0228A280, 0x00200001, 0x00204002, 0x00224001,
+ 0x00EE0009, 0x00724901, 0x01A24903, 0x00E40009, 0x00224001,
+ 0x00621120, 0x0183C908, 0x00E20005, 0x00718908, 0x0198A206,
+ 0x00621124, 0x0183C908, 0x00E20046, 0x00621104, 0x0183C908,
+ 0x00E20015, 0x00EE009D, 0x01A3E301, 0x00E2001B, 0x0183C900,
+ 0x00E2001B, 0x00210001, 0x00EE0020, 0x01A3E302, 0x00E2009D,
+ 0x0183C901, 0x00E2009D, 0x00210002, 0x0235D700, 0x0208A204,
+ 0x0071C908, 0x000F8207, 0x000FC207, 0x0071C920, 0x000F8507,
+ 0x000FC507, 0x0228A240, 0x02269A40, 0x00094004, 0x00621104,
+ 0x0180C908, 0x00E40031, 0x00621112, 0x01A3C801, 0x00E2002B,
+ 0x00294000, 0x0228A220, 0x01A69ABF, 0x002F8000, 0x002FC000,
+ 0x0198A204, 0x0001C022, 0x01B1A220, 0x0001C106, 0x00088007,
+ 0x0183C903, 0x00E2009D, 0x0228A220, 0x0071890C, 0x0208A206,
+ 0x0198A206, 0x0001C022, 0x01B1A220, 0x0001C106, 0x00088007,
+ 0x00EE009D, 0x00621104, 0x0183C908, 0x00E2004A, 0x00EE009D,
+ 0x01A3C901, 0x00E20050, 0x0021E7FF, 0x0183E007, 0x00E2009D,
+ 0x00EE0054, 0x0061600B, 0x0021E7FF, 0x0183C507, 0x00E2009D,
+ 0x01A3E301, 0x00E2005A, 0x0183C900, 0x00E2005A, 0x00210001,
+ 0x00EE005F, 0x01A3E302, 0x00E20005, 0x0183C901, 0x00E20005,
+ 0x00210002, 0x0235D700, 0x0208A204, 0x000F8109, 0x000FC109,
+ 0x0071C918, 0x000F8407, 0x000FC407, 0x0001C022, 0x01A1A2BF,
+ 0x0001C106, 0x00088007, 0x02269A40, 0x00094004, 0x00621112,
+ 0x01A3C801, 0x00E4007F, 0x00621104, 0x0180C908, 0x00E4008D,
+ 0x00621128, 0x0183C908, 0x00E2006C, 0x01A3C901, 0x00E2007B,
+ 0x0021E7FF, 0x0183E007, 0x00E2007F, 0x00EE006C, 0x0061600B,
+ 0x0021E7FF, 0x0183C507, 0x00E4006C, 0x00621111, 0x01A3C801,
+ 0x00E2007F, 0x00621110, 0x01A3C801, 0x00E20082, 0x0228A220,
+ 0x00621119, 0x01A3C801, 0x00E20086, 0x0001C022, 0x01B1A220,
+ 0x0001C106, 0x00088007, 0x0198A204, 0x00294000, 0x01A69ABF,
+ 0x002F8000, 0x002FC000, 0x0183C903, 0x00E20005, 0x0228A220,
+ 0x0071890C, 0x0208A206, 0x0198A206, 0x0001C022, 0x01B1A220,
+ 0x0001C106, 0x00088007, 0x00EE009D, 0x00621128, 0x0183C908,
+ 0x00E20005, 0x00621104, 0x0183C908, 0x00E200A6, 0x0062111C,
+ 0x0183C908, 0x00E20005, 0x0071890C, 0x0208A206, 0x0198A206,
+ 0x00718908, 0x0208A206, 0x00EE0005, ~0
+ };
+
+ /* Bi-Modal RAID-0/1 */
+ static const unsigned int raid[] = {
+ 0x00F20145, 0x00EE20FA, 0x00EE20A7, 0x0001C009, 0x00EE0004,
+ 0x00220000, 0x0001000B, 0x037003FF, 0x00700018, 0x037003FE,
+ 0x037043FD, 0x00704118, 0x037043FC, 0x01A3D240, 0x00E20017,
+ 0x00B3C235, 0x00E40018, 0x0093C104, 0x00E80014, 0x0093C004,
+ 0x00E80017, 0x01020000, 0x00274020, 0x00EE0083, 0x0080C904,
+ 0x0093C104, 0x00EA0020, 0x0093C103, 0x00EC001F, 0x00220002,
+ 0x00924104, 0x0005C009, 0x00EE0058, 0x0093CF04, 0x00E80026,
+ 0x00900F01, 0x00600001, 0x00910400, 0x00EE0058, 0x00601604,
+ 0x01A00003, 0x00E2002C, 0x01018000, 0x00274040, 0x00EE0083,
+ 0x0093CF03, 0x00EC0031, 0x00220003, 0x00924F04, 0x0005C009,
+ 0x00810104, 0x00B3C235, 0x00E20037, 0x0022C000, 0x00218210,
+ 0x00EE0039, 0x0022C001, 0x00218200, 0x00600401, 0x00A04901,
+ 0x00604101, 0x01A0C401, 0x00E20040, 0x00216202, 0x00EE0041,
+ 0x00216101, 0x02018506, 0x00EE2141, 0x00904901, 0x00E20049,
+ 0x00A00401, 0x00600001, 0x02E0C301, 0x00EE2141, 0x00216303,
+ 0x037003EE, 0x01A3C001, 0x00E40105, 0x00250080, 0x00204000,
+ 0x002042F1, 0x0004C001, 0x00230001, 0x00100006, 0x02C18605,
+ 0x00100006, 0x01A3D502, 0x00E20055, 0x00EE0053, 0x00004009,
+ 0x00000004, 0x00B3C235, 0x00E40062, 0x0022C001, 0x0020C000,
+ 0x00EE2141, 0x0020C001, 0x00EE2141, 0x00EE006B, 0x0022C000,
+ 0x0060D207, 0x00EE2141, 0x00B3C242, 0x00E20069, 0x01A3D601,
+ 0x00E2006E, 0x02E0C301, 0x00EE2141, 0x00230001, 0x00301303,
+ 0x00EE007B, 0x00218210, 0x01A3C301, 0x00E20073, 0x00216202,
+ 0x00EE0074, 0x00216101, 0x02018506, 0x00214000, 0x037003EE,
+ 0x01A3C001, 0x00E40108, 0x00230001, 0x00100006, 0x00250080,
+ 0x00204000, 0x002042F1, 0x0004C001, 0x00EE007F, 0x0024C000,
+ 0x01A3D1F0, 0x00E20088, 0x00230001, 0x00300000, 0x01A3D202,
+ 0x00E20085, 0x00EE00A5, 0x00B3C800, 0x00E20096, 0x00218000,
+ 0x00924709, 0x0005C009, 0x00B20802, 0x00E40093, 0x037103FD,
+ 0x00710418, 0x037103FC, 0x00EE0006, 0x00220000, 0x0001000F,
+ 0x00EE0006, 0x00800B0C, 0x00B00001, 0x00204000, 0x00208550,
+ 0x00208440, 0x002083E0, 0x00208200, 0x00208100, 0x01008000,
+ 0x037083EE, 0x02008212, 0x02008216, 0x01A3C201, 0x00E400A5,
+ 0x0100C000, 0x00EE20FA, 0x02800000, 0x00208000, 0x00B24C00,
+ 0x00E400AD, 0x00224001, 0x00724910, 0x0005C009, 0x00B3CDC4,
+ 0x00E200D5, 0x00B3CD29, 0x00E200D5, 0x00B3CD20, 0x00E200D5,
+ 0x00B3CD24, 0x00E200D5, 0x00B3CDC5, 0x00E200D2, 0x00B3CD39,
+ 0x00E200D2, 0x00B3CD30, 0x00E200D2, 0x00B3CD34, 0x00E200D2,
+ 0x00B3CDCA, 0x00E200CF, 0x00B3CD35, 0x00E200CF, 0x00B3CDC8,
+ 0x00E200CC, 0x00B3CD25, 0x00E200CC, 0x00B3CD40, 0x00E200CB,
+ 0x00B3CD42, 0x00E200CB, 0x01018000, 0x00EE0083, 0x0025C000,
+ 0x036083EE, 0x0000800D, 0x00EE00D8, 0x036083EE, 0x00208035,
+ 0x00EE00DA, 0x036083EE, 0x00208035, 0x00EE00DA, 0x00208007,
+ 0x036083EE, 0x00208025, 0x036083EF, 0x02400000, 0x01A3D208,
+ 0x00E200D8, 0x0067120A, 0x0021C000, 0x0021C224, 0x00220000,
+ 0x00404B1C, 0x00600105, 0x00800007, 0x0020C00E, 0x00214000,
+ 0x01004000, 0x01A0411F, 0x00404E01, 0x01A3C101, 0x00E200F1,
+ 0x00B20800, 0x00E400D8, 0x00220001, 0x0080490B, 0x00B04101,
+ 0x0040411C, 0x00EE00E1, 0x02269A01, 0x01020000, 0x02275D80,
+ 0x01A3D202, 0x00E200F4, 0x01B75D80, 0x01030000, 0x01B69A01,
+ 0x00EE00D8, 0x01A3D204, 0x00E40104, 0x00224000, 0x0020C00E,
+ 0x0020001E, 0x00214000, 0x01004000, 0x0212490E, 0x00214001,
+ 0x01004000, 0x02400000, 0x00B3D702, 0x00E80112, 0x00EE010E,
+ 0x00B3D702, 0x00E80112, 0x00B3D702, 0x00E4010E, 0x00230001,
+ 0x00EE0140, 0x00200005, 0x036003EE, 0x00204001, 0x00EE0116,
+ 0x00230001, 0x00100006, 0x02C18605, 0x00100006, 0x01A3D1F0,
+ 0x00E40083, 0x037003EE, 0x01A3C002, 0x00E20121, 0x0020A300,
+ 0x0183D102, 0x00E20124, 0x037003EE, 0x01A00005, 0x036003EE,
+ 0x01A0910F, 0x00B3C20F, 0x00E2012F, 0x01A3D502, 0x00E20116,
+ 0x01A3C002, 0x00E20116, 0x00B3D702, 0x00E4012C, 0x00300000,
+ 0x00EE011F, 0x02C18605, 0x00100006, 0x00EE0116, 0x01A3D1F0,
+ 0x00E40083, 0x037003EE, 0x01A3C004, 0x00E20088, 0x00200003,
+ 0x036003EE, 0x01A3D502, 0x00E20136, 0x00230001, 0x00B3C101,
+ 0x00E4012C, 0x00100006, 0x02C18605, 0x00100006, 0x00204000,
+ 0x00EE0116, 0x00100006, 0x01A3D1F0, 0x00E40083, 0x01000000,
+ 0x02400000, ~0
+ };
+
+ if (force)
+ previous_mode = UNKNOWN_MODE;
+
+ if (mode == previous_mode)
+ return;
+
+ /* decide what needs to be done using the STD in my logbook */
+ switch (previous_mode) {
+ case OXNASSATA_RAID1:
+ switch (mode) {
+ case OXNASSATA_RAID0:
+ changeparameters = 1;
+ break;
+ case OXNASSATA_NOTRAID:
+ changeparameters = 1;
+ progmicrocode = 1;
+ break;
+ }
+ break;
+ case OXNASSATA_RAID0:
+ switch (mode) {
+ case OXNASSATA_RAID1:
+ changeparameters = 1;
+ break;
+ case OXNASSATA_NOTRAID:
+ changeparameters = 1;
+ progmicrocode = 1;
+ break;
+ }
+ break;
+ case OXNASSATA_NOTRAID:
+ case UNKNOWN_MODE:
+ changeparameters = 1;
+ progmicrocode = 1;
+ break;
+ }
+
+ /* no need to reprogram everything if already in the right mode */
+ if (progmicrocode) {
+ /* reset micro-code processor */
+ iowrite32(1, core_base + PROC_RESET);
+ wmb();
+
+ /* select micro-code */
+ switch (mode) {
+ case OXNASSATA_RAID1:
+ case OXNASSATA_RAID0:
+ VPRINTK("Loading RAID micro-code\n");
+ src = (unsigned int *)&raid[1];
+ break;
+ case OXNASSATA_NOTRAID:
+ VPRINTK("Loading JBOD micro-code\n");
+ src = (unsigned int *)&jbod[1];
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ /* load micro code */
+ dst = core_base + UCODE_STORE;
+ while (*src != ~0) {
+ iowrite32(*src, dst);
+ src++;
+ dst += sizeof(*src);
+ }
+ wmb();
+ }
+
+ if (changeparameters) {
+ u32 reg;
+ /* set other mode dependent flags */
+ switch (mode) {
+ case OXNASSATA_RAID1:
+ /* clear JBOD mode */
+ reg = ioread32(core_base + DATA_PLANE_CTRL);
+ reg |= DPC_JBOD_UCODE;
+ reg &= ~DPC_FIS_SWCH;
+ iowrite32(reg, core_base + DATA_PLANE_CTRL);
+ wmb();
+
+ /* set the hardware up for RAID-1 */
+ iowrite32(0, core_base + RAID_WP_BOT_LOW);
+ iowrite32(0, core_base + RAID_WP_BOT_HIGH);
+ iowrite32(0xffffffff, core_base + RAID_WP_TOP_LOW);
+ iowrite32(0x7fffffff, core_base + RAID_WP_TOP_HIGH);
+ iowrite32(0, core_base + RAID_SIZE_LOW);
+ iowrite32(0, core_base + RAID_SIZE_HIGH);
+ wmb();
+ break;
+ case OXNASSATA_RAID0:
+ /* clear JBOD mode */
+ reg = ioread32(core_base + DATA_PLANE_CTRL);
+ reg |= DPC_JBOD_UCODE;
+ reg &= ~DPC_FIS_SWCH;
+ iowrite32(reg, core_base + DATA_PLANE_CTRL);
+ wmb();
+
+ /* set the hardware up for RAID-1 */
+ iowrite32(0, core_base + RAID_WP_BOT_LOW);
+ iowrite32(0, core_base + RAID_WP_BOT_HIGH);
+ iowrite32(0xffffffff, core_base + RAID_WP_TOP_LOW);
+ iowrite32(0x7fffffff, core_base + RAID_WP_TOP_HIGH);
+ iowrite32(0xffffffff, core_base + RAID_SIZE_LOW);
+ iowrite32(0x7fffffff, core_base + RAID_SIZE_HIGH);
+ wmb();
+ break;
+ case OXNASSATA_NOTRAID:
+ /* enable jbod mode */
+ reg = ioread32(core_base + DATA_PLANE_CTRL);
+ reg &= ~DPC_JBOD_UCODE;
+ reg |= DPC_FIS_SWCH;
+ iowrite32(reg, core_base + DATA_PLANE_CTRL);
+ wmb();
+
+ /* start micro-code processor*/
+ iowrite32(1, core_base + PROC_START);
+ break;
+ default:
+ break;
+ }
+ }
+
+ previous_mode = mode;
+}
+
+/**
+ * sends a sync-escape if there is a link present
+ */
+static inline void sata_oxnas_send_sync_escape(struct ata_port *ap)
+{
+ struct sata_oxnas_port_priv *pd = ap->private_data;
+ u32 reg;
+
+ /* read the SSTATUS register and only send a sync escape if there is a
+ * link active */
+ if ((sata_oxnas_link_read(ap, 0x20) & 3) == 3) {
+ reg = ioread32(pd->port_base + SATA_COMMAND);
+ reg &= ~SATA_OPCODE_MASK;
+ reg |= CMD_SYNC_ESCAPE;
+ iowrite32(reg, pd->port_base + SATA_COMMAND);
+ }
+}
+
+/* clears errors */
+static inline void sata_oxnas_clear_CS_error(u32 *base)
+{
+ u32 reg;
+
+ reg = ioread32(base + SATA_CONTROL);
+ reg &= SATA_CTL_ERR_MASK;
+ iowrite32(reg, base + SATA_CONTROL);
+}
+
+/**
+ * Clears the error caused by the core's registers being accessed when the
+ * core is busy.
+ */
+static inline void sata_oxnas_clear_reg_access_error(u32 *base)
+{
+ u32 reg;
+
+ reg = ioread32(base + INT_STATUS);
+
+ DPRINTK("ENTER\n");
+ if (reg & INT_REG_ACCESS_ERR) {
+ printk(KERN_INFO "clearing register access error\n");
+ iowrite32(INT_REG_ACCESS_ERR, base + INT_STATUS);
+ }
+ if (reg & INT_REG_ACCESS_ERR)
+ printk(KERN_INFO "register access error didn't clear\n");
+}
+
+/**
+ * Clean up all the state machines in the sata core.
+ * @return post cleanup action required
+ */
+static int sata_oxnas_cleanup(struct ata_host *ah)
+{
+ int actions_required = 0;
+
+ printk(KERN_INFO "ox820sata: reseting SATA core\n");
+
+ /* core not recovering, reset it */
+ mdelay(5);
+ sata_oxnas_reset_core(ah);
+ mdelay(5);
+ actions_required |= OXNAS_SATA_REINIT;
+ /* Perform any SATA core re-initialisation after reset post reset init
+ * needs to be called for both ports as there's one reset for both
+ * ports */
+
+ sata_oxnas_post_reset_init(ah->ports[0]);
+
+ return actions_required;
+}
+
+void sata_oxnas_freeze_host(struct ata_port *ap)
+{
+ struct sata_oxnas_host_priv *hd = ap->host->private_data;
+
+ DPRINTK("ENTER\n");
+ hd->port_in_eh |= BIT(ap->port_no);
+ smp_wmb();
+}
+
+void sata_oxnas_thaw_host(struct ata_port *ap)
+{
+ struct sata_oxnas_host_priv *hd = ap->host->private_data;
+
+ DPRINTK("ENTER\n");
+ hd->port_in_eh &= ~BIT(ap->port_no);
+ smp_wmb();
+}
+
+static void sata_oxnas_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ DPRINTK("ENTER\n");
+ /* If the core is busy here, make it idle */
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ sata_oxnas_cleanup(qc->ap->host);
+}
+
+
+/**
+ * turn on the interrupts
+ *
+ * @param ap Hardware with the registers in
+ */
+static void sata_oxnas_irq_on(struct ata_port *ap)
+{
+ struct sata_oxnas_port_priv *pd = ap->private_data;
+ u32 mask = (COREINT_END << ap->port_no);
+
+ /* Clear pending interrupts */
+ iowrite32(~0, pd->port_base + INT_CLEAR);
+ iowrite32(mask, pd->core_base + CORE_INT_STATUS);
+ wmb();
+
+ /* enable End of command interrupt */
+ iowrite32(INT_WANT, pd->port_base + INT_ENABLE);
+ iowrite32(mask, pd->core_base + CORE_INT_ENABLE);
+}
+
+
+/** @return true if the port has a cable connected */
+int sata_oxnas_check_link(struct ata_port *ap)
+{
+ int reg;
+
+ sata_oxnas_scr_read_port(ap, SCR_STATUS, &reg);
+ /* Check for the cable present indicated by SCR status bit-0 set */
+ return reg & 0x1;
+}
+
+/**
+ * ata_std_postreset - standard postreset callback
+ * @link: the target ata_link
+ * @classes: classes of attached devices
+ *
+ * This function is invoked after a successful reset. Note that
+ * the device might have been reset more than once using
+ * different reset methods before postreset is invoked.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+static void sata_oxnas_postreset(struct ata_link *link, unsigned int *classes)
+{
+ struct ata_port *ap = link->ap;
+
+ unsigned int dev;
+
+ DPRINTK("ENTER\n");
+ ata_std_postreset(link, classes);
+
+ /* turn on phy error detection by removing the masks */
+ sata_oxnas_link_write(ap , 0x0c, 0x30003);
+
+ /* bail out if no device is present */
+ if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+ DPRINTK("EXIT, no device\n");
+ return;
+ }
+
+ /* go through all the devices and configure them */
+ for (dev = 0; dev < ATA_MAX_DEVICES; ++dev) {
+ if (ap->link.device[dev].class == ATA_DEV_ATA)
+ sata_oxnas_dev_config(&(ap->link.device[dev]));
+ }
+
+ DPRINTK("EXIT\n");
+}
+
+/**
+ * Called to read the hardware registers / DMA buffers, to
+ * obtain the current set of taskfile register values.
+ * @param ap hardware with the registers in
+ * @param tf taskfile to read the registers into
+ */
+static void sata_oxnas_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct sata_oxnas_port_priv *port_priv = ap->private_data;
+ void __iomem *port_base = port_priv->port_base;
+ /* read the orb registers */
+ u32 Orb1 = ioread32(port_base + ORB1);
+ u32 Orb2 = ioread32(port_base + ORB2);
+ u32 Orb3 = ioread32(port_base + ORB3);
+ u32 Orb4 = ioread32(port_base + ORB4);
+
+ /* read common 28/48 bit tf parameters */
+ tf->device = (Orb1 >> 24);
+ tf->nsect = (Orb2 >> 0);
+ tf->feature = (Orb2 >> 16);
+ tf->command = sata_oxnas_check_status(ap);
+
+ /* read 48 or 28 bit tf parameters */
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ tf->hob_nsect = (Orb2 >> 8);
+ tf->lbal = (Orb3 >> 0);
+ tf->lbam = (Orb3 >> 8);
+ tf->lbah = (Orb3 >> 16);
+ tf->hob_lbal = (Orb3 >> 24);
+ tf->hob_lbam = (Orb4 >> 0);
+ tf->hob_lbah = (Orb4 >> 8);
+ /* feature ext and control are write only */
+ } else {
+ /* read 28-bit lba */
+ tf->lbal = (Orb3 >> 0);
+ tf->lbam = (Orb3 >> 8);
+ tf->lbah = (Orb3 >> 16);
+ }
+}
+
+/**
+ * Read a result task-file from the sata core registers.
+ */
+static bool sata_oxnas_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ /* Read the most recently received FIS from the SATA core ORB registers
+ and convert to an ATA taskfile */
+ sata_oxnas_tf_read(qc->ap, &qc->result_tf);
+ return true;
+}
+
+/**
+ * Reads the Status ATA shadow register from hardware.
+ *
+ * @return The status register
+ */
+static u8 sata_oxnas_check_status(struct ata_port *ap)
+{
+ u32 Reg;
+ u8 status;
+ struct sata_oxnas_port_priv *port_priv = ap->private_data;
+ void __iomem *port_base = port_priv->port_base;
+
+ /* read byte 3 of Orb2 register */
+ status = ioread32(port_base + ORB2) >> 24;
+
+ /* check for the drive going missing indicated by SCR status bits
+ * 0-3 = 0 */
+ sata_oxnas_scr_read_port(ap, SCR_STATUS, &Reg);
+
+ if (!(Reg & 0x1)) {
+ status |= ATA_DF;
+ status |= ATA_ERR;
+ }
+
+ return status;
+}
+
+/**
+ * Prepare as much as possible for a command without involving anything that is
+ * shared between ports.
+ */
+static void sata_oxnas_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct sata_oxnas_port_priv *pd;
+ int port_no = qc->ap->port_no;
+
+ /* if the port's not connected, complete now with an error */
+ /*
+ if (!sata_oxnas_check_link(qc->ap)) {
+ printk(KERN_ERR "port %d not connected completing with error\n",
+ qc->ap->port_no);
+ qc->err_mask |= AC_ERR_ATA_BUS;
+ ata_qc_complete(qc);
+ }
+ */
+ /* both pio and dma commands use dma */
+ if (ata_is_dma(qc->tf.protocol) || ata_is_pio(qc->tf.protocol)) {
+ /* program the scatterlist into the prd table */
+ ata_bmdma_qc_prep(qc);
+
+ /* point the sgdma controller at the dma request structure */
+ pd = qc->ap->private_data;
+
+ iowrite32(pd->sgdma_request_pa,
+ pd->sgdma_base + SGDMA_REQUESTPTR);
+
+ /* setup the request table */
+ if (port_no == 0) {
+ pd->sgdma_request->control =
+ (qc->dma_dir == DMA_FROM_DEVICE) ?
+ SGDMA_REQCTL0IN : SGDMA_REQCTL0OUT;
+ } else {
+ pd->sgdma_request->control =
+ (qc->dma_dir == DMA_FROM_DEVICE) ?
+ SGDMA_REQCTL1IN : SGDMA_REQCTL1OUT;
+ }
+ pd->sgdma_request->qualifier = SGDMA_REQQUAL;
+ pd->sgdma_request->src_pa = qc->ap->bmdma_prd_dma;
+ pd->sgdma_request->dst_pa = qc->ap->bmdma_prd_dma;
+ smp_wmb();
+
+ /* tell it to wait */
+ iowrite32(SGDMA_CONTROL_NOGO, pd->sgdma_base + SGDMA_CONTROL);
+ }
+}
+
+static int sata_oxnas_port_start(struct ata_port *ap)
+{
+ struct sata_oxnas_host_priv *host_priv = ap->host->private_data;
+ struct device *dev = ap->host->dev;
+ struct sata_oxnas_port_priv *pp;
+ void *mem;
+ dma_addr_t mem_dma;
+
+ DPRINTK("ENTER\n");
+
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+
+ pp->port_base = host_priv->port_base[ap->port_no];
+ pp->sgdma_base = host_priv->sgdma_base[ap->port_no];
+ pp->core_base = host_priv->core_base;
+
+ /* preallocated */
+ if (host_priv->dma_size >= SATA_OXNAS_DMA_SIZE * SATA_OXNAS_MAX_PORTS) {
+ mem_dma = host_priv->dma_base +
+ ap->port_no * SATA_OXNAS_DMA_SIZE;
+ mem = ioremap(mem_dma, SATA_OXNAS_DMA_SIZE);
+
+ } else {
+ mem = dma_alloc_coherent(dev, SATA_OXNAS_DMA_SIZE, &mem_dma,
+ GFP_KERNEL);
+ }
+ if (!mem)
+ goto err_ret;
+
+ pp->sgdma_request_pa = mem_dma;
+ pp->sgdma_request = mem;
+ ap->bmdma_prd_dma = mem_dma + sizeof(struct sgdma_request);
+ ap->bmdma_prd = mem + sizeof(struct sgdma_request);
+
+ ap->private_data = pp;
+
+ sata_oxnas_post_reset_init(ap);
+
+ return 0;
+
+err_ret:
+ kfree(pp);
+ return -ENOMEM;
+
+}
+
+static void sata_oxnas_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host->dev;
+ struct sata_oxnas_port_priv *pp = ap->private_data;
+ struct sata_oxnas_host_priv *host_priv = ap->host->private_data;
+
+ DPRINTK("ENTER\n");
+ ap->private_data = NULL;
+ if (host_priv->dma_size) {
+ iounmap(pp->sgdma_request);
+ } else {
+ dma_free_coherent(dev, SATA_OXNAS_DMA_SIZE,
+ pp->sgdma_request, pp->sgdma_request_pa);
+ }
+
+ kfree(pp);
+}
+
+static void sata_oxnas_post_reset_init(struct ata_port *ap)
+{
+ struct sata_oxnas_port_priv *pd = ap->private_data;
+ uint dev;
+ int no_microcode = 0;
+
+ DPRINTK("ENTER\n");
+ if (no_microcode) {
+ u32 reg;
+ sata_oxnas_set_mode(ap, UNKNOWN_MODE, 1);
+ reg = readl(pd->core_base + DEVICE_CONTROL);
+ reg |= DEVICE_CONTROL_ATA_ERR_OVERRIDE;
+ writel(reg, pd->core_base + DEVICE_CONTROL);
+ } else {
+ /* JBOD uCode */
+ sata_oxnas_set_mode(ap, OXNASSATA_NOTRAID, 1);
+ /* Turn the work around off as it may have been left on by any
+ * HW-RAID code that we've been working with */
+ writel(0x0, pd->core_base + PORT_ERROR_MASK);
+ }
+ /* turn on phy error detection by removing the masks */
+ sata_oxnas_link_write(ap, 0x0C, 0x30003);
+
+ /* enable hotplug event detection */
+ sata_oxnas_scr_write_port(ap, SCR_ERROR, ~0);
+ sata_oxnas_scr_write_port(ap, SERROR_IRQ_MASK, 0x03feffff);
+ sata_oxnas_scr_write_port(ap, SCR_ACTIVE, ~0 & ~(1 << 26) & ~(1 << 16));
+
+ /* enable interrupts for ports */
+ sata_oxnas_irq_on(ap);
+
+ /* go through all the devices and configure them */
+ for (dev = 0; dev < ATA_MAX_DEVICES; ++dev) {
+ if (ap->link.device[dev].class == ATA_DEV_ATA) {
+ sata_std_hardreset(&ap->link, NULL, jiffies + HZ);
+ sata_oxnas_dev_config(&(ap->link.device[dev]));
+ }
+ }
+
+ /* clean up any remaining errors */
+ sata_oxnas_scr_write_port(ap, SCR_ERROR, ~0);
+ VPRINTK("done\n");
+}
+
+/**
+ * host_stop() is called when the rmmod or hot unplug process begins. The
+ * hook must stop all hardware interrupts, DMA engines, etc.
+ *
+ * @param ap hardware with the registers in
+ */
+static void sata_oxnas_host_stop(struct ata_host *host_set)
+{
+ DPRINTK("\n");
+}
+
+
+#define ERROR_HW_ACQUIRE_TIMEOUT_JIFFIES (10 * HZ)
+static void sata_oxnas_error_handler(struct ata_port *ap)
+{
+ DPRINTK("Enter port_no %d\n", ap->port_no);
+ sata_oxnas_freeze_host(ap);
+
+ /* If the core is busy here, make it idle */
+ sata_oxnas_cleanup(ap->host);
+
+ ata_std_error_handler(ap);
+
+ sata_oxnas_thaw_host(ap);
+}
+
+static int sata_oxnas_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct sata_oxnas_port_priv *pd = ap->private_data;
+ void __iomem *port_base = pd->port_base;
+ int rc;
+
+ struct ata_taskfile tf;
+ u32 Command_Reg;
+
+ DPRINTK("ENTER\n");
+
+ port_base = pd->port_base;
+
+ if (ata_link_offline(link)) {
+ DPRINTK("PHY reports no device\n");
+ *class = ATA_DEV_NONE;
+ goto out;
+ }
+
+ /* write value to register */
+ iowrite32((ap->ctl) << 24, port_base + ORB4);
+
+ /* command the core to send a control FIS */
+ Command_Reg = ioread32(port_base + SATA_COMMAND);
+ Command_Reg &= ~SATA_OPCODE_MASK;
+ Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND;
+ iowrite32(Command_Reg, port_base + SATA_COMMAND);
+ udelay(20); /* FIXME: flush */
+
+ /* write value to register */
+ iowrite32((ap->ctl | ATA_SRST) << 24, port_base + ORB4);
+
+ /* command the core to send a control FIS */
+ Command_Reg &= ~SATA_OPCODE_MASK;
+ Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND;
+ iowrite32(Command_Reg, port_base + SATA_COMMAND);
+ udelay(20); /* FIXME: flush */
+
+ /* write value to register */
+ iowrite32((ap->ctl) << 24, port_base + ORB4);
+
+ /* command the core to send a control FIS */
+ Command_Reg &= ~SATA_OPCODE_MASK;
+ Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND;
+ iowrite32(Command_Reg, port_base + SATA_COMMAND);
+
+ msleep(150);
+
+ rc = ata_sff_wait_ready(link, deadline);
+
+ /* if link is occupied, -ENODEV too is an error */
+ if (rc && (rc != -ENODEV || sata_scr_valid(link))) {
+ ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
+ return rc;
+ }
+
+ /* determine by signature whether we have ATA or ATAPI devices */
+ sata_oxnas_tf_read(ap, &tf);
+ *class = ata_dev_classify(&tf);
+
+ if (*class == ATA_DEV_UNKNOWN)
+ *class = ATA_DEV_NONE;
+
+out:
+ DPRINTK("EXIT, class=%u\n", *class);
+ return 0;
+}
+
+
+int sata_oxnas_init_controller(struct ata_host *host)
+{
+ return 0;
+}
+
+/**
+ * Ref bug-6320
+ *
+ * This code is a work around for a DMA hardware bug that will repeat the
+ * penultimate 8-bytes on some reads. This code will check that the amount
+ * of data transferred is a multiple of 512 bytes, if not the in it will
+ * fetch the correct data from a buffer in the SATA core and copy it into
+ * memory.
+ *
+ * @param port SATA port to check and if necessary, correct.
+ */
+static int ox820sata_bug_6320_workaround(struct ata_port *ap)
+{
+ struct sata_oxnas_port_priv *pd = ap->private_data;
+ void __iomem *core_base = pd->core_base;
+ int is_read;
+ int quads_transferred;
+ int remainder;
+ int sector_quads_remaining;
+ int bug_present = 0;
+
+ /* Only want to apply fix to reads */
+ is_read = !(readl(core_base + DM_DBG1) & (ap->port_no ?
+ BIT(CORE_PORT1_DATA_DIR_BIT) :
+ BIT(CORE_PORT0_DATA_DIR_BIT)));
+
+ /* Check for an incomplete transfer, i.e. not a multiple of 512 bytes
+ transferred (datacount_port register counts quads transferred) */
+ quads_transferred =
+ readl(core_base + (ap->port_no ?
+ DATACOUNT_PORT1 : DATACOUNT_PORT0));
+
+ remainder = quads_transferred & 0x7f;
+ sector_quads_remaining = remainder ? (0x80 - remainder) : 0;
+
+ if (is_read && (sector_quads_remaining == 2)) {
+ bug_present = 1;
+ } else if (sector_quads_remaining) {
+ if (is_read) {
+ printk(KERN_WARNING "SATA read fixup cannot deal with" \
+ " %d quads remaining\n",
+ sector_quads_remaining);
+ } else {
+ printk(KERN_WARNING "SATA write fixup of %d quads" \
+ " remaining not supported\n",
+ sector_quads_remaining);
+ }
+ }
+
+ return bug_present;
+}
+
+/* This port done an interrupt */
+static void sata_oxnas_port_irq(struct ata_port *ap, int force_error)
+{
+ struct ata_queued_cmd *qc;
+ struct sata_oxnas_port_priv *pd = ap->private_data;
+ void __iomem *port_base = pd->port_base;
+
+ u32 int_status;
+ unsigned long flags = 0;
+
+ /* DPRINTK("ENTER irqstatus %x\n", ioread32(port_base + INT_STATUS)); */
+/*
+ if (ap->qc_active & (1 << ATA_TAG_INTERNAL)) {
+ qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
+ DPRINTK("completing non-ncq cmd\n");
+
+ if (qc) {
+ ata_qc_complete(qc);
+ }
+ return;
+ }
+*/
+
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+
+
+ /* record the port's interrupt */
+ int_status = ioread32(port_base + INT_STATUS);
+
+ /* If there's no command associated with this IRQ, ignore it. We may get
+ * spurious interrupts when cleaning-up after a failed command, ignore
+ * these too. */
+ if (likely(qc)) {
+ /* get the status before any error cleanup */
+ qc->err_mask = ac_err_mask(sata_oxnas_check_status(ap));
+ if (force_error) {
+ /* Pretend there has been a link error */
+ qc->err_mask |= AC_ERR_ATA_BUS;
+ DPRINTK(" ####force error####\n");
+ }
+ /* tell libata we're done */
+ local_irq_save(flags);
+ sata_oxnas_irq_clear(ap);
+ local_irq_restore(flags);
+ ata_qc_complete(qc);
+ } else {
+ VPRINTK("Ignoring interrupt, can't find the command tag=" \
+ "%d %08x\n", ap->link.active_tag, ap->qc_active);
+ }
+
+ /* maybe a hotplug event */
+ if (unlikely(int_status & INT_LINK_SERROR)) {
+ u32 serror;
+
+ sata_oxnas_scr_read_port(ap, SCR_ERROR, &serror);
+ if (serror & (SERR_DEV_XCHG | SERR_PHYRDY_CHG)) {
+ ata_ehi_hotplugged(&ap->link.eh_info);
+ ata_port_freeze(ap);
+ }
+ }
+}
+
+/**
+ * irq_handler is the interrupt handling routine registered with the system,
+ * by libata.
+ */
+static irqreturn_t sata_oxnas_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *ah = dev_instance;
+ struct sata_oxnas_host_priv *hd = ah->private_data;
+ void __iomem *core_base = hd->core_base;
+
+ u32 int_status;
+ irqreturn_t ret = IRQ_NONE;
+ u32 port_no;
+ u32 mask;
+ int bug_present;
+
+ /* loop until there are no more interrupts */
+ while ((int_status = ioread32(core_base + CORE_INT_STATUS)) &
+ COREINT_END) {
+
+ /* clear any interrupt */
+ iowrite32(int_status, core_base + CORE_INT_CLEAR);
+
+ /* Only need this workaround for single disk systems as dual
+ * disk will use uCode which prevents this read underrun problem
+ * from occuring.
+ * All single disk systems will use port 0 */
+
+ for (port_no = 0; port_no < SATA_OXNAS_MAX_PORTS; ++port_no) {
+ /* check the raw end of command interrupt to see if the
+ * port is done */
+ mask = (CORERAW_HOST << port_no);
+ if (int_status & mask) {
+ /* this port had an interrupt, clear it */
+ iowrite32(mask, core_base + CORE_INT_CLEAR);
+ bug_present = ox820sata_bug_6320_workaround(
+ ah->ports[port_no]);
+ sata_oxnas_port_irq(ah->ports[port_no],
+ bug_present);
+ ret = IRQ_HANDLED;
+ }
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * scsi mid-layer and libata interface structures
+ */
+static struct scsi_host_template sata_oxnas_sht = {
+ ATA_NCQ_SHT("sata_oxnas"),
+ .can_queue = SATA_OXNAS_QUEUE_DEPTH,
+ .sg_tablesize = SATA_OXNAS_MAX_PRD,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .unchecked_isa_dma = 0,
+};
+
+
+static struct ata_port_operations sata_oxnas_ops = {
+ .inherits = &sata_port_ops,
+ .qc_prep = sata_oxnas_qc_prep,
+ .qc_issue = sata_oxnas_qc_issue,
+ .qc_fill_rtf = sata_oxnas_qc_fill_rtf,
+
+ .scr_read = sata_oxnas_scr_read,
+ .scr_write = sata_oxnas_scr_write,
+
+ /* .freeze = sata_oxnas_freeze, */
+ /* .thaw = sata_oxnas_thaw, */
+ .softreset = sata_oxnas_softreset,
+ /* .hardreset = sata_oxnas_hardreset, */
+ .postreset = sata_oxnas_postreset,
+ .error_handler = sata_oxnas_error_handler,
+ .post_internal_cmd = sata_oxnas_post_internal_cmd,
+
+ .port_start = sata_oxnas_port_start,
+ .port_stop = sata_oxnas_port_stop,
+
+ .host_stop = sata_oxnas_host_stop,
+ /* .pmp_attach = sata_oxnas_pmp_attach, */
+ /* .pmp_detach = sata_oxnas_pmp_detach, */
+ .sff_check_status = sata_oxnas_check_status,
+};
+
+static const struct ata_port_info sata_oxnas_port_info = {
+ .flags = SATA_OXNAS_HOST_FLAGS,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &sata_oxnas_ops,
+};
+
+static int sata_oxnas_probe(struct platform_device *ofdev)
+{
+ int retval = -ENXIO;
+ void __iomem *port_base = NULL;
+ void __iomem *sgdma_base = NULL;
+ void __iomem *core_base = NULL;
+ void __iomem *phy_base = NULL;
+ struct reset_control *rstc;
+
+ struct resource res = {};
+ struct sata_oxnas_host_priv *host_priv = NULL;
+ int irq = 0;
+ struct ata_host *host = NULL;
+ struct clk *clk = NULL;
+
+ const struct ata_port_info *ppi[] = { &sata_oxnas_port_info, NULL };
+
+ port_base = of_iomap(ofdev->dev.of_node, 0);
+ if (!port_base)
+ goto error_exit_with_cleanup;
+
+ sgdma_base = of_iomap(ofdev->dev.of_node, 1);
+ if (!sgdma_base)
+ goto error_exit_with_cleanup;
+
+ core_base = of_iomap(ofdev->dev.of_node, 2);
+ if (!core_base)
+ goto error_exit_with_cleanup;
+
+ phy_base = of_iomap(ofdev->dev.of_node, 3);
+ if (!phy_base)
+ goto error_exit_with_cleanup;
+
+ host_priv = devm_kzalloc(&ofdev->dev,
+ sizeof(struct sata_oxnas_host_priv),
+ GFP_KERNEL);
+ if (!host_priv)
+ goto error_exit_with_cleanup;
+
+ host_priv->port_base[0] = port_base;
+ host_priv->sgdma_base[0] = sgdma_base;
+ host_priv->core_base = core_base;
+ host_priv->phy_base = phy_base;
+
+ if (!of_address_to_resource(ofdev->dev.of_node, 4, &res)) {
+ host_priv->dma_base = res.start;
+ host_priv->dma_size = resource_size(&res);
+ }
+
+ irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+ if (!irq) {
+ dev_err(&ofdev->dev, "invalid irq from platform\n");
+ goto error_exit_with_cleanup;
+ }
+ host_priv->irq = irq;
+
+ clk = of_clk_get(ofdev->dev.of_node, 0);
+ if (IS_ERR(clk)) {
+ retval = PTR_ERR(clk);
+ clk = NULL;
+ goto error_exit_with_cleanup;
+ }
+ host_priv->clk = clk;
+
+ rstc = devm_reset_control_get(&ofdev->dev, "sata");
+ if (IS_ERR(rstc)) {
+ retval = PTR_ERR(rstc);
+ goto error_exit_with_cleanup;
+ }
+ host_priv->rst_sata = rstc;
+
+ rstc = devm_reset_control_get(&ofdev->dev, "link");
+ if (IS_ERR(rstc)) {
+ retval = PTR_ERR(rstc);
+ goto error_exit_with_cleanup;
+ }
+ host_priv->rst_link = rstc;
+
+ rstc = devm_reset_control_get(&ofdev->dev, "phy");
+ if (IS_ERR(rstc)) {
+ retval = PTR_ERR(rstc);
+ goto error_exit_with_cleanup;
+ }
+ host_priv->rst_phy = rstc;
+
+ /* allocate host structure */
+ host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_OXNAS_MAX_PORTS);
+ if (!host) {
+ retval = -ENOMEM;
+ goto error_exit_with_cleanup;
+ }
+ host->private_data = host_priv;
+ host->iomap = port_base;
+
+ /* initialize host controller */
+ retval = sata_oxnas_init_controller(host);
+ if (retval)
+ goto error_exit_with_cleanup;
+
+ /*
+ * Now, register with libATA core, this will also initiate the
+ * device discovery process, invoking our port_start() handler &
+ * error_handler() to execute a dummy softreset EH session
+ */
+ ata_host_activate(host, irq, sata_oxnas_interrupt, SATA_OXNAS_IRQ_FLAG,
+ &sata_oxnas_sht);
+
+ return 0;
+
+error_exit_with_cleanup:
+ if (irq)
+ irq_dispose_mapping(host_priv->irq);
+ if (clk)
+ clk_put(clk);
+ if (host)
+ ata_host_detach(host);
+ if (port_base)
+ iounmap(port_base);
+ if (sgdma_base)
+ iounmap(sgdma_base);
+ if (core_base)
+ iounmap(core_base);
+ if (phy_base)
+ iounmap(phy_base);
+ return retval;
+}
+
+
+static int sata_oxnas_remove(struct platform_device *ofdev)
+{
+ struct ata_host *host = dev_get_drvdata(&ofdev->dev);
+ struct sata_oxnas_host_priv *host_priv = host->private_data;
+
+ ata_host_detach(host);
+
+ irq_dispose_mapping(host_priv->irq);
+ iounmap(host_priv->port_base);
+ iounmap(host_priv->sgdma_base);
+ iounmap(host_priv->core_base);
+
+ /* reset Controller, Link and PHY */
+ reset_control_assert(host_priv->rst_sata);
+ reset_control_assert(host_priv->rst_link);
+ reset_control_assert(host_priv->rst_phy);
+
+ /* Disable the clock to the SATA block */
+ clk_disable_unprepare(host_priv->clk);
+ clk_put(host_priv->clk);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sata_oxnas_suspend(struct platform_device *op, pm_message_t state)
+{
+ struct ata_host *host = dev_get_drvdata(&op->dev);
+
+ return ata_host_suspend(host, state);
+}
+
+static int sata_oxnas_resume(struct platform_device *op)
+{
+ struct ata_host *host = dev_get_drvdata(&op->dev);
+ int ret;
+
+ ret = sata_oxnas_init_controller(host);
+ if (ret) {
+ dev_err(&op->dev, "Error initializing hardware\n");
+ return ret;
+ }
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
+
+
+static struct of_device_id oxnas_sata_match[] = {
+ {
+ .compatible = "plxtech,nas782x-sata",
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, oxnas_sata_match);
+
+static struct platform_driver oxnas_sata_driver = {
+ .driver = {
+ .name = "oxnas-sata",
+ .owner = THIS_MODULE,
+ .of_match_table = oxnas_sata_match,
+ },
+ .probe = sata_oxnas_probe,
+ .remove = sata_oxnas_remove,
+#ifdef CONFIG_PM
+ .suspend = sata_oxnas_suspend,
+ .resume = sata_oxnas_resume,
+#endif
+};
+
+module_platform_driver(oxnas_sata_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0");
+MODULE_AUTHOR("Oxford Semiconductor Ltd.");
+MODULE_DESCRIPTION("934 SATA core controler");
diff --git a/target/linux/oxnas/files/drivers/clk/clk-oxnas.c b/target/linux/oxnas/files/drivers/clk/clk-oxnas.c
new file mode 100644
index 0000000000..8d80c4f2b8
--- /dev/null
+++ b/target/linux/oxnas/files/drivers/clk/clk-oxnas.c
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2010 Broadcom
+ * Copyright (C) 2012 Stephen Warren
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/stringify.h>
+#include <linux/reset.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/utils.h>
+
+#define MHZ (1000 * 1000)
+
+static unsigned long plla_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned long fin = parent_rate;
+ unsigned long pll0;
+ unsigned long fbdiv, refdiv, outdiv;
+
+ pll0 = readl_relaxed(SYS_CTRL_PLLA_CTRL0);
+ refdiv = (pll0 >> PLLA_REFDIV_SHIFT) & PLLA_REFDIV_MASK;
+ refdiv += 1;
+ outdiv = (pll0 >> PLLA_OUTDIV_SHIFT) & PLLA_OUTDIV_MASK;
+ outdiv += 1;
+ fbdiv = readl_relaxed(SYS_CTRL_PLLA_CTRL1);
+
+ /* seems we will not be here when pll is bypassed, so ignore this
+ * case */
+
+ return fin / MHZ * fbdiv / (refdiv * outdiv) / 32768 * MHZ;
+}
+
+static const char *pll_clk_parents[] = {
+ "oscillator",
+};
+
+static struct clk_ops plla_ops = {
+ .recalc_rate = plla_clk_recalc_rate,
+};
+
+static struct clk_init_data clk_plla_init = {
+ .name = "plla",
+ .ops = &plla_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_hw plla_hw = {
+ .init = &clk_plla_init,
+};
+
+static struct device_node *node_pllb;
+
+int pllb_clk_enable(struct clk_hw *hw)
+{
+ struct reset_control *rstc;
+
+ rstc = of_reset_control_get(node_pllb, NULL);
+ if (IS_ERR(rstc))
+ return PTR_ERR(rstc);
+
+ /* put PLL into bypass */
+ oxnas_register_set_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS));
+ wmb();
+ udelay(10);
+ reset_control_assert(rstc);
+ udelay(10);
+ /* set PLL B control information */
+ writel((1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV),
+ SEC_CTRL_PLLB_CTRL0);
+ reset_control_deassert(rstc);
+ reset_control_put(rstc);
+ udelay(100);
+ oxnas_register_clear_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS));
+
+ return 0;
+}
+
+void pllb_clk_disable(struct clk_hw *hw)
+{
+ struct reset_control *rstc;
+
+ /* put PLL into bypass */
+ oxnas_register_set_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS));
+ wmb();
+ udelay(10);
+
+ rstc = of_reset_control_get(node_pllb, NULL);
+ if (!IS_ERR(rstc))
+ reset_control_assert(rstc);
+}
+
+static struct clk_ops pllb_ops = {
+ .enable = pllb_clk_enable,
+ .disable = pllb_clk_disable,
+};
+
+static struct clk_init_data clk_pllb_init = {
+ .name = "pllb",
+ .ops = &pllb_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_hw pllb_hw = {
+ .init = &clk_pllb_init,
+};
+
+/* standard gate clock */
+struct clk_std {
+ struct clk_hw hw;
+ signed char bit;
+};
+
+#define NUM_STD_CLKS 17
+#define to_stdclk(_hw) container_of(_hw, struct clk_std, hw)
+
+static int std_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_std *std = to_stdclk(hw);
+
+ return readl_relaxed(SYSCTRL_CLK_STAT) & BIT(std->bit);
+}
+
+static int std_clk_enable(struct clk_hw *hw)
+{
+ struct clk_std *std = to_stdclk(hw);
+
+ writel(BIT(std->bit), SYS_CTRL_CLK_SET_CTRL);
+ return 0;
+}
+
+static void std_clk_disable(struct clk_hw *hw)
+{
+ struct clk_std *std = to_stdclk(hw);
+
+ writel(BIT(std->bit), SYS_CTRL_CLK_CLR_CTRL);
+}
+
+static struct clk_ops std_clk_ops = {
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+ .is_enabled = std_clk_is_enabled,
+};
+
+static const char *std_clk_parents[] = {
+ "oscillator",
+};
+
+static const char *eth_parents[] = {
+ "gmacclk",
+};
+
+#define DECLARE_STD_CLKP(__clk, __bit, __parent) \
+static struct clk_init_data clk_##__clk##_init = { \
+ .name = __stringify(__clk), \
+ .ops = &std_clk_ops, \
+ .parent_names = __parent, \
+ .num_parents = ARRAY_SIZE(__parent), \
+}; \
+ \
+static struct clk_std clk_##__clk = { \
+ .bit = __bit, \
+ .hw = { \
+ .init = &clk_##__clk##_init, \
+ }, \
+}
+
+#define DECLARE_STD_CLK(__clk, __bit) DECLARE_STD_CLKP(__clk, __bit, \
+ std_clk_parents)
+
+DECLARE_STD_CLK(leon, 0);
+DECLARE_STD_CLK(dma_sgdma, 1);
+DECLARE_STD_CLK(cipher, 2);
+DECLARE_STD_CLK(sd, 3);
+DECLARE_STD_CLK(sata, 4);
+DECLARE_STD_CLK(audio, 5);
+DECLARE_STD_CLK(usbmph, 6);
+DECLARE_STD_CLKP(etha, 7, eth_parents);
+DECLARE_STD_CLK(pciea, 8);
+DECLARE_STD_CLK(static, 9);
+DECLARE_STD_CLK(ethb, 10);
+DECLARE_STD_CLK(pcieb, 11);
+DECLARE_STD_CLK(ref600, 12);
+DECLARE_STD_CLK(usbdev, 13);
+
+struct clk_hw *std_clk_hw_tbl[] = {
+ &clk_leon.hw,
+ &clk_dma_sgdma.hw,
+ &clk_cipher.hw,
+ &clk_sd.hw,
+ &clk_sata.hw,
+ &clk_audio.hw,
+ &clk_usbmph.hw,
+ &clk_etha.hw,
+ &clk_pciea.hw,
+ &clk_static.hw,
+ &clk_ethb.hw,
+ &clk_pcieb.hw,
+ &clk_ref600.hw,
+ &clk_usbdev.hw,
+};
+
+struct clk *std_clk_tbl[ARRAY_SIZE(std_clk_hw_tbl)];
+
+static struct clk_onecell_data std_clk_data;
+
+void __init oxnas_init_stdclk(struct device_node *np)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(std_clk_hw_tbl); i++) {
+ std_clk_tbl[i] = clk_register(NULL, std_clk_hw_tbl[i]);
+ BUG_ON(IS_ERR(std_clk_tbl[i]));
+ }
+ std_clk_data.clks = std_clk_tbl;
+ std_clk_data.clk_num = ARRAY_SIZE(std_clk_tbl);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &std_clk_data);
+}
+CLK_OF_DECLARE(oxnas_pllstd, "plxtech,nas782x-stdclk", oxnas_init_stdclk);
+
+void __init oxnas_init_plla(struct device_node *np)
+{
+ struct clk *clk;
+
+ clk = clk_register(NULL, &plla_hw);
+ BUG_ON(IS_ERR(clk));
+ /* mark it as enabled */
+ clk_prepare_enable(clk);
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(oxnas_plla, "plxtech,nas782x-plla", oxnas_init_plla);
+
+void __init oxnas_init_pllb(struct device_node *np)
+{
+ struct clk *clk;
+
+ node_pllb = np;
+
+ clk = clk_register(NULL, &pllb_hw);
+ BUG_ON(IS_ERR(clk));
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(oxnas_pllb, "plxtech,nas782x-pllb", oxnas_init_pllb);
diff --git a/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c b/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c
new file mode 100644
index 0000000000..7c8c4cf435
--- /dev/null
+++ b/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-ox820/rps-time.c
+ *
+ * Copyright (C) 2009 Oxford Semiconductor Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/sched_clock.h>
+#include <mach/hardware.h>
+
+enum {
+ TIMER_LOAD = 0,
+ TIMER_CURR = 4,
+ TIMER_CTRL = 8,
+ TIMER_CLRINT = 0xC,
+
+ TIMER_BITS = 24,
+
+ TIMER_MAX_VAL = (1 << TIMER_BITS) - 1,
+
+ TIMER_PERIODIC = (1 << 6),
+ TIMER_ENABLE = (1 << 7),
+
+ TIMER_DIV1 = (0 << 2),
+ TIMER_DIV16 = (1 << 2),
+ TIMER_DIV256 = (2 << 2),
+
+ TIMER1_OFFSET = 0,
+ TIMER2_OFFSET = 0x20,
+
+};
+
+static u64 notrace rps_read_sched_clock(void)
+{
+ return ~readl_relaxed(RPSA_TIMER2_VAL);
+}
+
+static void __init rps_clocksource_init(void __iomem *base, ulong ref_rate)
+{
+ int ret;
+ ulong clock_rate;
+ /* use prescale 16 */
+ clock_rate = ref_rate / 16;
+
+ iowrite32(TIMER_MAX_VAL, base + TIMER_LOAD);
+ iowrite32(TIMER_PERIODIC | TIMER_ENABLE | TIMER_DIV16,
+ base + TIMER_CTRL);
+
+ ret = clocksource_mmio_init(base + TIMER_CURR, "rps_clocksource_timer",
+ clock_rate, 250, TIMER_BITS,
+ clocksource_mmio_readl_down);
+ if (ret)
+ panic("can't register clocksource\n");
+
+ sched_clock_register(rps_read_sched_clock, TIMER_BITS, clock_rate);
+}
+
+static void __init rps_timer_init(struct device_node *np)
+{
+ struct clk *refclk;
+ unsigned long ref_rate;
+ void __iomem *base;
+
+ refclk = of_clk_get(np, 0);
+
+ if (IS_ERR(refclk) || clk_prepare_enable(refclk))
+ panic("rps_timer_init: failed to get refclk\n");
+ ref_rate = clk_get_rate(refclk);
+
+ base = of_iomap(np, 0);
+ if (!base)
+ panic("rps_timer_init: failed to map io\n");
+
+ rps_clocksource_init(base + TIMER2_OFFSET, ref_rate);
+}
+
+CLOCKSOURCE_OF_DECLARE(nas782x, "plxtech,nas782x-rps-timer", rps_timer_init);
diff --git a/target/linux/oxnas/files/drivers/irqchip/irq-rps.c b/target/linux/oxnas/files/drivers/irqchip/irq-rps.c
new file mode 100644
index 0000000000..5795406fef
--- /dev/null
+++ b/target/linux/oxnas/files/drivers/irqchip/irq-rps.c
@@ -0,0 +1,146 @@
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "irqchip.h"
+
+struct rps_chip_data {
+ void __iomem *base;
+ struct irq_chip chip;
+ struct irq_domain *domain;
+} rps_data;
+
+enum {
+ RPS_IRQ_BASE = 64,
+ RPS_IRQ_COUNT = 32,
+ PRS_HWIRQ_BASE = 0,
+
+ RPS_STATUS = 0,
+ RPS_RAW_STATUS = 4,
+ RPS_UNMASK = 8,
+ RPS_MASK = 0xc,
+};
+
+/*
+ * Routines to acknowledge, disable and enable interrupts
+ */
+static void rps_mask_irq(struct irq_data *d)
+{
+ struct rps_chip_data *chip_data = irq_data_get_irq_chip_data(d);
+ u32 mask = BIT(d->hwirq);
+
+ iowrite32(mask, chip_data->base + RPS_MASK);
+}
+
+static void rps_unmask_irq(struct irq_data *d)
+{
+ struct rps_chip_data *chip_data = irq_data_get_irq_chip_data(d);
+ u32 mask = BIT(d->hwirq);
+
+ iowrite32(mask, chip_data->base + RPS_UNMASK);
+}
+
+static struct irq_chip rps_chip = {
+ .name = "RPS",
+ .irq_mask = rps_mask_irq,
+ .irq_unmask = rps_unmask_irq,
+};
+
+static int rps_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ if (d->of_node != controller)
+ return -EINVAL;
+ if (intsize < 1)
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+ /* Honestly I do not know the type */
+ *out_type = IRQ_TYPE_LEVEL_HIGH;
+
+ return 0;
+}
+
+static int rps_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &rps_chip, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ irq_set_chip_data(irq, d->host_data);
+ return 0;
+}
+
+const struct irq_domain_ops rps_irq_domain_ops = {
+ .map = rps_irq_domain_map,
+ .xlate = rps_irq_domain_xlate,
+};
+
+static void rps_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct rps_chip_data *chip_data = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+ unsigned int cascade_irq, rps_irq;
+ u32 status;
+
+ chained_irq_enter(chip, desc);
+
+ status = ioread32(chip_data->base + RPS_STATUS);
+ rps_irq = __ffs(status);
+ cascade_irq = irq_find_mapping(chip_data->domain, rps_irq);
+
+ if (unlikely(rps_irq >= RPS_IRQ_COUNT))
+ handle_bad_irq(cascade_irq, desc);
+ else
+ generic_handle_irq(cascade_irq);
+
+ chained_irq_exit(chip, desc);
+}
+
+#ifdef CONFIG_OF
+int __init rps_of_init(struct device_node *node, struct device_node *parent)
+{
+ void __iomem *rps_base;
+ int irq_start = RPS_IRQ_BASE;
+ int irq_base;
+ int irq;
+
+ if (WARN_ON(!node))
+ return -ENODEV;
+
+ rps_base = of_iomap(node, 0);
+ WARN(!rps_base, "unable to map rps registers\n");
+ rps_data.base = rps_base;
+
+ irq_base = irq_alloc_descs(irq_start, 0, RPS_IRQ_COUNT, numa_node_id());
+ if (IS_ERR_VALUE(irq_base)) {
+ WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
+ irq_start);
+ irq_base = irq_start;
+ }
+
+ rps_data.domain = irq_domain_add_legacy(node, RPS_IRQ_COUNT, irq_base,
+ PRS_HWIRQ_BASE, &rps_irq_domain_ops, &rps_data);
+
+ if (WARN_ON(!rps_data.domain))
+ return -ENOMEM;
+
+ if (parent) {
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq_set_handler_data(irq, &rps_data) != 0)
+ BUG();
+ irq_set_chained_handler(irq, rps_handle_cascade_irq);
+ }
+ return 0;
+
+}
+
+IRQCHIP_DECLARE(nas782x, "plxtech,nas782x-rps", rps_of_init);
+#endif
diff --git a/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c b/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c
new file mode 100644
index 0000000000..55eb009bac
--- /dev/null
+++ b/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c
@@ -0,0 +1,102 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <mach/utils.h>
+
+/* nand commands */
+#define NAND_CMD_ALE BIT(18)
+#define NAND_CMD_CLE BIT(19)
+#define NAND_CMD_CS 0
+#define NAND_CMD_RESET 0xff
+#define NAND_CMD (NAND_CMD_CS | NAND_CMD_CLE)
+#define NAND_ADDR (NAND_CMD_CS | NAND_CMD_ALE)
+#define NAND_DATA (NAND_CMD_CS)
+
+static void oxnas_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ nandaddr &= ~(NAND_CMD | NAND_ADDR);
+ if (ctrl & NAND_CLE)
+ nandaddr |= NAND_CMD;
+ else if (ctrl & NAND_ALE)
+ nandaddr |= NAND_ADDR;
+ this->IO_ADDR_W = (void __iomem *) nandaddr;
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, (void __iomem *) nandaddr);
+}
+
+static int oxnas_nand_probe(struct platform_device *pdev)
+{
+ /* enable clock and release static block reset */
+ struct clk *clk = of_clk_get(pdev->dev.of_node, 0);
+
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ clk_prepare_enable(clk);
+ device_reset(&pdev->dev);
+
+ return 0;
+}
+
+/* allow users to override the partition in DT using the cmdline */
+static const char * part_probes[] = { "cmdlinepart", "ofpart", NULL };
+
+static struct platform_nand_data oxnas_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_delay = 30,
+ .part_probe_types = part_probes,
+ },
+ .ctrl = {
+ .probe = oxnas_nand_probe,
+ .cmd_ctrl = oxnas_cmd_ctrl,
+ }
+};
+
+/*
+ * Try to find the node inside the DT. If it is available attach out
+ * platform_nand_data
+ */
+static int __init oxnas_register_nand(void)
+{
+ struct device_node *node;
+ struct platform_device *pdev;
+
+ node = of_find_compatible_node(NULL, NULL, "plxtech,nand-nas782x");
+ if (!node)
+ return -ENOENT;
+ pdev = of_find_device_by_node(node);
+ if (!pdev)
+ return -EINVAL;
+ pdev->dev.platform_data = &oxnas_nand_data;
+ of_node_put(node);
+ return 0;
+}
+
+subsys_initcall(oxnas_register_nand);
+
+static const struct of_device_id oxnas_nand_ids[] = {
+ { .compatible = "plxtech,nand-nas782x"},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, oxnas_nand_ids);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ma Haijun");
+MODULE_DESCRIPTION("NAND glue for Oxnas platforms");
+MODULE_ALIAS("platform:oxnas_nand");
diff --git a/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
new file mode 100644
index 0000000000..9e8d6d9f93
--- /dev/null
+++ b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
@@ -0,0 +1,676 @@
+/*
+ * PCIe driver for PLX NAS782X SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/mbus.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <mach/iomap.h>
+#include <mach/hardware.h>
+#include <mach/utils.h>
+
+#define VERSION_ID_MAGIC 0x082510b5
+#define LINK_UP_TIMEOUT_SECONDS 1
+#define NUM_CONTROLLERS 1
+
+enum {
+ PCIE_DEVICE_TYPE_MASK = 0x0F,
+ PCIE_DEVICE_TYPE_ENDPOINT = 0,
+ PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1,
+ PCIE_DEVICE_TYPE_ROOT = 4,
+
+ PCIE_LTSSM = BIT(4),
+ PCIE_READY_ENTR_L23 = BIT(9),
+ PCIE_LINK_UP = BIT(11),
+ PCIE_OBTRANS = BIT(12),
+};
+
+enum {
+ HCSL_BIAS_ON = BIT(0),
+ HCSL_PCIE_EN = BIT(1),
+ HCSL_PCIEA_EN = BIT(2),
+ HCSL_PCIEB_EN = BIT(3),
+};
+
+enum {
+ /* pcie phy reg offset */
+ PHY_ADDR = 0,
+ PHY_DATA = 4,
+ /* phy data reg bits */
+ READ_EN = BIT(16),
+ WRITE_EN = BIT(17),
+ CAP_DATA = BIT(18),
+};
+
+/* core config registers */
+enum {
+ PCI_CONFIG_VERSION_DEVICEID = 0,
+ PCI_CONFIG_COMMAND_STATUS = 4,
+};
+
+/* inbound config registers */
+enum {
+ IB_ADDR_XLATE_ENABLE = 0xFC,
+
+ /* bits */
+ ENABLE_IN_ADDR_TRANS = BIT(0),
+};
+
+/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */
+enum {
+ PCIE_POM0_MEM_ADDR = 0,
+ PCIE_POM1_MEM_ADDR = 4,
+ PCIE_IN0_MEM_ADDR = 8,
+ PCIE_IN1_MEM_ADDR = 12,
+ PCIE_IN_IO_ADDR = 16,
+ PCIE_IN_CFG0_ADDR = 20,
+ PCIE_IN_CFG1_ADDR = 24,
+ PCIE_IN_MSG_ADDR = 28,
+ PCIE_IN0_MEM_LIMIT = 32,
+ PCIE_IN1_MEM_LIMIT = 36,
+ PCIE_IN_IO_LIMIT = 40,
+ PCIE_IN_CFG0_LIMIT = 44,
+ PCIE_IN_CFG1_LIMIT = 48,
+ PCIE_IN_MSG_LIMIT = 52,
+ PCIE_AHB_SLAVE_CTRL = 56,
+
+ PCIE_SLAVE_BE_SHIFT = 22,
+};
+
+#define ADDR_VAL(val) ((val) & 0xFFFF)
+#define DATA_VAL(val) ((val) & 0xFFFF)
+
+#define PCIE_SLAVE_BE(val) ((val) << PCIE_SLAVE_BE_SHIFT)
+#define PCIE_SLAVE_BE_MASK PCIE_SLAVE_BE(0xF)
+
+struct oxnas_pcie_shared {
+ /* seems all access are serialized, no lock required */
+ int refcount;
+};
+
+/* Structure representing one PCIe interfaces */
+struct oxnas_pcie {
+ void __iomem *cfgbase;
+ void __iomem *base;
+ void __iomem *inbound;
+ void __iomem *outbound;
+ void __iomem *pcie_ctrl;
+
+ int haslink;
+ struct platform_device *pdev;
+ struct resource io;
+ struct resource cfg;
+ struct resource pre_mem; /* prefetchable */
+ struct resource non_mem; /* non-prefetchable */
+ struct resource busn; /* max available bus numbers */
+ int card_reset; /* gpio pin, optional */
+ unsigned hcsl_en; /* hcsl pci enable bit */
+ struct clk *clk;
+ struct clk *busclk; /* for pcie bus, actually the PLLB */
+ void *private_data[1];
+ spinlock_t lock;
+};
+
+static struct oxnas_pcie_shared pcie_shared = {
+ .refcount = 0,
+};
+
+static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys)
+{
+ return sys->private_data;
+}
+
+
+static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes)
+{
+ oxnas_register_value_mask(pcie->outbound + PCIE_AHB_SLAVE_CTRL,
+ PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes));
+ wmb();
+}
+
+static int oxnas_pcie_link_up(struct oxnas_pcie *pcie)
+{
+ unsigned long end;
+
+ /* Poll for PCIE link up */
+ end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ);
+ while (!time_after(jiffies, end)) {
+ if (readl(pcie->pcie_ctrl) & PCIE_LINK_UP)
+ return 1;
+ }
+ return 0;
+}
+
+static void __init oxnas_pcie_setup_hw(struct oxnas_pcie *pcie)
+{
+ /* We won't have any inbound address translation. This allows PCI
+ * devices to access anywhere in the AHB address map. Might be regarded
+ * as a bit dangerous, but let's get things working before we worry
+ * about that
+ */
+ oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE,
+ ENABLE_IN_ADDR_TRANS);
+ wmb();
+
+ /*
+ * Program outbound translation windows
+ *
+ * Outbound window is what is referred to as "PCI client" region in HRM
+ *
+ * Could use the larger alternative address space to get >>64M regions
+ * for graphics cards etc., but will not bother at this point.
+ *
+ * IP bug means that AMBA window size must be a power of 2
+ *
+ * Set mem0 window for first 16MB of outbound window non-prefetchable
+ * Set mem1 window for second 16MB of outbound window prefetchable
+ * Set io window for next 16MB of outbound window
+ * Set cfg0 for final 1MB of outbound window
+ *
+ * Ignore mem1, cfg1 and msg windows for now as no obvious use cases for
+ * 820 that would need them
+ *
+ * Probably ideally want no offset between mem0 window start as seen by
+ * ARM and as seen on PCI bus and get Linux to assign memory regions to
+ * PCI devices using the same "PCI client" region start address as seen
+ * by ARM
+ */
+
+ /* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */
+ writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_IN0_MEM_ADDR);
+ writel_relaxed(pcie->non_mem.end, pcie->outbound + PCIE_IN0_MEM_LIMIT);
+ writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_POM0_MEM_ADDR);
+
+ /* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */
+ writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_IN1_MEM_ADDR);
+ writel_relaxed(pcie->pre_mem.end, pcie->outbound + PCIE_IN1_MEM_LIMIT);
+ writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_POM1_MEM_ADDR);
+
+ /* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/
+ writel_relaxed(pcie->io.start, pcie->outbound + PCIE_IN_IO_ADDR);
+ writel_relaxed(pcie->io.end, pcie->outbound + PCIE_IN_IO_LIMIT);
+
+ /* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/
+ writel_relaxed(pcie->cfg.start, pcie->outbound + PCIE_IN_CFG0_ADDR);
+ writel_relaxed(pcie->cfg.end, pcie->outbound + PCIE_IN_CFG0_LIMIT);
+ wmb();
+
+ /* Enable outbound address translation */
+ oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_OBTRANS);
+ wmb();
+
+ /*
+ * Program PCIe command register for core to:
+ * enable memory space
+ * enable bus master
+ * enable io
+ */
+ writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS);
+ /* which is which */
+ wmb();
+}
+
+static unsigned oxnas_pcie_cfg_to_offset(
+ struct pci_sys_data *sys,
+ unsigned char bus_number,
+ unsigned int devfn,
+ int where)
+{
+ unsigned int function = PCI_FUNC(devfn);
+ unsigned int slot = PCI_SLOT(devfn);
+ unsigned char bus_number_offset;
+
+ bus_number_offset = bus_number - sys->busnr;
+
+ /*
+ * We'll assume for now that the offset, function, slot, bus encoding
+ * should map onto linear, contiguous addresses in PCIe config space,
+ * albeit that the majority will be unused as only slot 0 is valid for
+ * any PCIe bus and most devices have only function 0
+ *
+ * Could be that PCIe in fact works by not encoding the slot number into
+ * the config space address as it's known that only slot 0 is valid.
+ * We'll have to experiment if/when we get a PCIe switch connected to
+ * the PCIe host
+ */
+ return (bus_number_offset << 20) | (slot << 15) | (function << 12) |
+ (where & ~3);
+}
+
+/* PCI configuration space write function */
+static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ unsigned long flags;
+ struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
+ unsigned offset;
+ u32 value;
+ u32 lanes;
+
+ /* Only a single device per bus for PCIe point-to-point links */
+ if (PCI_SLOT(devfn) > 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (!pcie->haslink)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
+ where);
+
+ value = val << (8 * (where & 3));
+ lanes = (0xf >> (4-size)) << (where & 3);
+ /* it race with mem and io write, but the possibility is low, normally
+ * all config writes happens at driver initialize stage, wont interleave
+ * with others.
+ * and many pcie cards use dword (4bytes) access mem/io access only,
+ * so not bother to copy that ugly work-around now. */
+ spin_lock_irqsave(&pcie->lock, flags);
+ set_out_lanes(pcie, lanes);
+ writel_relaxed(value, pcie->cfgbase + offset);
+ set_out_lanes(pcie, 0xf);
+ spin_unlock_irqrestore(&pcie->lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCI configuration space read function */
+static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
+ unsigned offset;
+ u32 value;
+ u32 left_bytes, right_bytes;
+
+ /* Only a single device per bus for PCIe point-to-point links */
+ if (PCI_SLOT(devfn) > 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ if (!pcie->haslink) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
+ where);
+ value = readl_relaxed(pcie->cfgbase + offset);
+ left_bytes = where & 3;
+ right_bytes = 4 - left_bytes - size;
+ value <<= right_bytes * 8;
+ value >>= (left_bytes + right_bytes) * 8;
+ *val = value;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops oxnas_pcie_ops = {
+ .read = oxnas_pcie_rd_conf,
+ .write = oxnas_pcie_wr_conf,
+};
+
+static int __init oxnas_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+ struct oxnas_pcie *pcie = sys_to_pcie(sys);
+
+ pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset);
+ pci_add_resource(&sys->resources, &pcie->busn);
+ if (sys->busnr == 0) { /* default one */
+ sys->busnr = pcie->busn.start;
+ }
+ /* do not use devm_ioremap_resource, it does not like cfg resource */
+ pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start,
+ resource_size(&pcie->cfg));
+ if (!pcie->cfgbase)
+ return -ENOMEM;
+
+ oxnas_pcie_setup_hw(pcie);
+
+ return 1;
+}
+
+static void __init oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie)
+{
+ struct hw_pci hw;
+ int i;
+
+ memset(&hw, 0, sizeof(hw));
+ for (i = 0; i < NUM_CONTROLLERS; i++)
+ pcie->private_data[i] = pcie;
+
+ hw.nr_controllers = NUM_CONTROLLERS;
+/* I think use stack pointer is a bad idea though it is valid in this case */
+ hw.private_data = pcie->private_data;
+ hw.setup = oxnas_pcie_setup;
+ hw.map_irq = of_irq_parse_and_map_pci;
+ hw.ops = &oxnas_pcie_ops;
+
+ /* pass dev to maintain of tree, interrupt mapping rely on this */
+ pci_common_init_dev(dev, &hw);
+}
+
+void oxnas_pcie_init_shared_hw(struct platform_device *pdev,
+ void __iomem *phybase)
+{
+ struct reset_control *rstc;
+ int ret;
+
+ /* generate clocks from HCSL buffers, shared parts */
+ writel(HCSL_BIAS_ON|HCSL_PCIE_EN, SYS_CTRL_HCSL_CTRL);
+
+ /* Ensure PCIe PHY is properly reset */
+ rstc = reset_control_get(&pdev->dev, "phy");
+ if (IS_ERR(rstc)) {
+ ret = PTR_ERR(rstc);
+ } else {
+ ret = reset_control_reset(rstc);
+ reset_control_put(rstc);
+ }
+
+ if (ret) {
+ dev_err(&pdev->dev, "phy reset failed %d\n", ret);
+ return;
+ }
+
+ /* Enable PCIe Pre-Emphasis: What these value means? */
+
+ writel(ADDR_VAL(0x0014), phybase + PHY_ADDR);
+ writel(DATA_VAL(0xce10) | CAP_DATA, phybase + PHY_DATA);
+ writel(DATA_VAL(0xce10) | WRITE_EN, phybase + PHY_DATA);
+
+ writel(ADDR_VAL(0x2004), phybase + PHY_ADDR);
+ writel(DATA_VAL(0x82c7) | CAP_DATA, phybase + PHY_DATA);
+ writel(DATA_VAL(0x82c7) | WRITE_EN, phybase + PHY_DATA);
+}
+
+static int oxnas_pcie_shared_init(struct platform_device *pdev)
+{
+ if (++pcie_shared.refcount == 1) {
+ /* we are the first */
+ struct device_node *np = pdev->dev.of_node;
+ void __iomem *phy = of_iomap(np, 2);
+ if (!phy) {
+ --pcie_shared.refcount;
+ return -ENOMEM;
+ }
+ oxnas_pcie_init_shared_hw(pdev, phy);
+ iounmap(phy);
+ return 0;
+ } else {
+ return 0;
+ }
+}
+
+#if 0
+/* maybe we will call it when enter low power state */
+static void oxnas_pcie_shared_deinit(struct platform_device *pdev)
+{
+ if (--pcie_shared.refcount == 0) {
+ /* no cleanup needed */;
+ }
+}
+#endif
+
+static int __init
+oxnas_pcie_map_registers(struct platform_device *pdev,
+ struct device_node *np,
+ struct oxnas_pcie *pcie)
+{
+ struct resource regs;
+ int ret = 0;
+ u32 outbound_ctrl_offset;
+ u32 pcie_ctrl_offset;
+
+ /* 2 is reserved for shared phy */
+ ret = of_address_to_resource(np, 0, &regs);
+ if (ret)
+ return -EINVAL;
+ pcie->base = devm_ioremap_resource(&pdev->dev, &regs);
+ if (!pcie->base)
+ return -ENOMEM;
+
+ ret = of_address_to_resource(np, 1, &regs);
+ if (ret)
+ return -EINVAL;
+ pcie->inbound = devm_ioremap_resource(&pdev->dev, &regs);
+ if (!pcie->inbound)
+ return -ENOMEM;
+
+
+ if (of_property_read_u32(np, "plxtech,pcie-outbound-offset",
+ &outbound_ctrl_offset))
+ return -EINVAL;
+ /* SYSCRTL is shared by too many drivers, so is mapped by board file */
+ pcie->outbound = IOMEM(OXNAS_SYSCRTL_BASE_VA + outbound_ctrl_offset);
+
+ if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset",
+ &pcie_ctrl_offset))
+ return -EINVAL;
+ pcie->pcie_ctrl = IOMEM(OXNAS_SYSCRTL_BASE_VA + pcie_ctrl_offset);
+
+ return 0;
+}
+
+static int __init oxnas_pcie_init_res(struct platform_device *pdev,
+ struct oxnas_pcie *pcie,
+ struct device_node *np)
+{
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+ int ret;
+
+ if (of_pci_range_parser_init(&parser, np))
+ return -EINVAL;
+
+ /* Get the I/O and memory ranges from DT */
+ for_each_of_pci_range(&parser, &range) {
+
+ unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
+ if (restype == IORESOURCE_IO) {
+ of_pci_range_to_resource(&range, np, &pcie->io);
+ pcie->io.name = "I/O";
+ }
+ if (restype == IORESOURCE_MEM) {
+ if (range.flags & IORESOURCE_PREFETCH) {
+ of_pci_range_to_resource(&range, np, &pcie->pre_mem);
+ pcie->pre_mem.name = "PRE MEM";
+ } else {
+ of_pci_range_to_resource(&range, np, &pcie->non_mem);
+ pcie->non_mem.name = "NON MEM";
+ }
+
+ }
+ if (restype == 0)
+ of_pci_range_to_resource(&range, np, &pcie->cfg);
+ }
+
+ /* Get the bus range */
+ ret = of_pci_parse_bus_range(np, &pcie->busn);
+
+ if (ret) {
+ dev_err(&pdev->dev, "failed to parse bus-range property: %d\n",
+ ret);
+ return ret;
+ }
+
+ pcie->card_reset = of_get_gpio(np, 0);
+ if (pcie->card_reset < 0)
+ dev_info(&pdev->dev, "card reset gpio pin not exists\n");
+
+ if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en))
+ return -EINVAL;
+
+ pcie->clk = of_clk_get_by_name(np, "pcie");
+ if (IS_ERR(pcie->clk)) {
+ return PTR_ERR(pcie->clk);
+ }
+
+ pcie->busclk = of_clk_get_by_name(np, "busclk");
+ if (IS_ERR(pcie->busclk)) {
+ clk_put(pcie->clk);
+ return PTR_ERR(pcie->busclk);
+ }
+
+ return 0;
+}
+
+static void oxnas_pcie_init_hw(struct platform_device *pdev,
+ struct oxnas_pcie *pcie)
+{
+ u32 version_id;
+ int ret;
+
+ clk_prepare_enable(pcie->busclk);
+
+ /* reset PCIe cards use hard-wired gpio pin */
+ if (pcie->card_reset >= 0 &&
+ !gpio_direction_output(pcie->card_reset, 0)) {
+ wmb();
+ mdelay(10);
+ /* must tri-state the pin to pull it up */
+ gpio_direction_input(pcie->card_reset);
+ wmb();
+ mdelay(100);
+ }
+
+ oxnas_register_set_mask(SYS_CTRL_HCSL_CTRL, BIT(pcie->hcsl_en));
+
+ /* core */
+ ret = device_reset(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "core reset failed %d\n", ret);
+ return;
+ }
+
+ /* Start PCIe core clocks */
+ clk_prepare_enable(pcie->clk);
+
+ version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID);
+ dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id);
+
+ if (version_id != VERSION_ID_MAGIC) {
+ dev_info(&pdev->dev, "PCIe controller not found\n");
+ pcie->haslink = 0;
+ return;
+ }
+
+ /* allow entry to L23 state */
+ oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_READY_ENTR_L23);
+
+ /* Set PCIe core into RootCore mode */
+ oxnas_register_value_mask(pcie->pcie_ctrl, PCIE_DEVICE_TYPE_MASK,
+ PCIE_DEVICE_TYPE_ROOT);
+ wmb();
+
+ /* Bring up the PCI core */
+ oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_LTSSM);
+ wmb();
+}
+
+static int __init oxnas_pcie_probe(struct platform_device *pdev)
+{
+ struct oxnas_pcie *pcie;
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie),
+ GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ pcie->pdev = pdev;
+ pcie->haslink = 1;
+ spin_lock_init(&pcie->lock);
+
+ ret = oxnas_pcie_init_res(pdev, pcie, np);
+ if (ret)
+ return ret;
+ if (pcie->card_reset >= 0) {
+ ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN,
+ dev_name(&pdev->dev));
+ if (ret) {
+ dev_err(&pdev->dev, "cannot request gpio pin %d\n",
+ pcie->card_reset);
+ return ret;
+ }
+ }
+
+ ret = oxnas_pcie_map_registers(pdev, np, pcie);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot map registers\n");
+ goto err_free_gpio;
+ }
+
+ ret = oxnas_pcie_shared_init(pdev);
+ if (ret)
+ goto err_free_gpio;
+
+ /* if hw not found, haslink cleared */
+ oxnas_pcie_init_hw(pdev, pcie);
+
+ if (pcie->haslink && oxnas_pcie_link_up(pcie)) {
+ pcie->haslink = 1;
+ dev_info(&pdev->dev, "link up\n");
+ } else {
+ pcie->haslink = 0;
+ dev_info(&pdev->dev, "link down\n");
+ }
+ /* should we register our controller even when pcie->haslink is 0 ? */
+ /* register the controller with framework */
+ oxnas_pcie_enable(&pdev->dev, pcie);
+
+ return 0;
+
+err_free_gpio:
+ if (pcie->card_reset)
+ gpio_free(pcie->card_reset);
+
+ return ret;
+}
+
+static const struct of_device_id oxnas_pcie_of_match_table[] = {
+ { .compatible = "plxtech,nas782x-pcie", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, oxnas_pcie_of_match_table);
+
+static struct platform_driver oxnas_pcie_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "oxnas-pcie",
+ .of_match_table =
+ of_match_ptr(oxnas_pcie_of_match_table),
+ },
+};
+
+static int __init oxnas_pcie_init(void)
+{
+ return platform_driver_probe(&oxnas_pcie_driver,
+ oxnas_pcie_probe);
+}
+
+subsys_initcall(oxnas_pcie_init);
+
+MODULE_AUTHOR("Ma Haijun <mahaijuns@gmail.com>");
+MODULE_DESCRIPTION("NAS782x PCIe driver");
+MODULE_LICENSE("GPLv2");
diff --git a/target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c b/target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c
new file mode 100644
index 0000000000..6cc8f72c60
--- /dev/null
+++ b/target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c
@@ -0,0 +1,1480 @@
+/*
+ * oxnas pinctrl driver based on at91 pinctrl driver
+ *
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+/* Since we request GPIOs from ourself */
+#include <linux/pinctrl/consumer.h>
+
+#include "core.h"
+
+#include <mach/utils.h>
+
+#define MAX_NB_GPIO_PER_BANK 32
+#define MAX_GPIO_BANKS 2
+
+struct oxnas_gpio_chip {
+ struct gpio_chip chip;
+ struct pinctrl_gpio_range range;
+ void __iomem *regbase; /* GPIOA/B virtual address */
+ void __iomem *ctrlbase; /* SYS/SEC_CTRL virtual address */
+ struct irq_domain *domain; /* associated irq domain */
+};
+
+#define to_oxnas_gpio_chip(c) container_of(c, struct oxnas_gpio_chip, chip)
+
+static struct oxnas_gpio_chip *gpio_chips[MAX_GPIO_BANKS];
+
+static int gpio_banks;
+
+#define PULL_UP (1 << 0)
+#define PULL_DOWN (1 << 1)
+#define DEBOUNCE (1 << 2)
+
+/**
+ * struct oxnas_pmx_func - describes pinmux functions
+ * @name: the name of this specific function
+ * @groups: corresponding pin groups
+ * @ngroups: the number of groups
+ */
+struct oxnas_pmx_func {
+ const char *name;
+ const char **groups;
+ unsigned ngroups;
+};
+
+enum oxnas_mux {
+ OXNAS_PINMUX_GPIO,
+ OXNAS_PINMUX_FUNC2,
+ OXNAS_PINMUX_FUNC3,
+ OXNAS_PINMUX_FUNC4,
+ OXNAS_PINMUX_DEBUG,
+ OXNAS_PINMUX_ALT,
+};
+
+enum {
+ INPUT_VALUE = 0,
+ OUTPUT_ENABLE = 4,
+ IRQ_PENDING = 0xC,
+ OUTPUT_VALUE = 0x10,
+ OUTPUT_SET = 0x14,
+ OUTPUT_CLEAR = 0x18,
+ OUTPUT_EN_SET = 0x1C,
+ OUTPUT_EN_CLEAR = 0x20,
+ DEBOUNCE_ENABLE = 0x24,
+ RE_IRQ_ENABLE = 0x28, /* rising edge */
+ FE_IRQ_ENABLE = 0x2C, /* falling edge */
+ RE_IRQ_PENDING = 0x30, /* rising edge */
+ FE_IRQ_PENDING = 0x34, /* falling edge */
+ CLOCK_DIV = 0x48,
+ PULL_ENABLE = 0x50,
+ PULL_SENSE = 0x54, /* 1 up, 0 down */
+
+
+ DEBOUNCE_MASK = 0x3FFF0000,
+ /* put hw debounce and soft config at same bit position*/
+ DEBOUNCE_SHIFT = 16
+};
+
+enum {
+ PINMUX_SECONDARY_SEL = 0x14,
+ PINMUX_TERTIARY_SEL = 0x8c,
+ PINMUX_QUATERNARY_SEL = 0x94,
+ PINMUX_DEBUG_SEL = 0x9c,
+ PINMUX_ALTERNATIVE_SEL = 0xa4,
+ PINMUX_PULLUP_SEL = 0xac,
+};
+
+/**
+ * struct oxnas_pmx_pin - describes an pin mux
+ * @bank: the bank of the pin
+ * @pin: the pin number in the @bank
+ * @mux: the mux mode : gpio or periph_x of the pin i.e. alternate function.
+ * @conf: the configuration of the pin: PULL_UP, MULTIDRIVE etc...
+ */
+struct oxnas_pmx_pin {
+ uint32_t bank;
+ uint32_t pin;
+ enum oxnas_mux mux;
+ unsigned long conf;
+};
+
+/**
+ * struct oxnas_pin_group - describes an pin group
+ * @name: the name of this specific pin group
+ * @pins_conf: the mux mode for each pin in this group. The size of this
+ * array is the same as pins.
+ * @pins: an array of discrete physical pins used in this group, taken
+ * from the driver-local pin enumeration space
+ * @npins: the number of pins in this group array, i.e. the number of
+ * elements in .pins so we can iterate over that array
+ */
+struct oxnas_pin_group {
+ const char *name;
+ struct oxnas_pmx_pin *pins_conf;
+ unsigned int *pins;
+ unsigned npins;
+};
+
+struct oxnas_pinctrl {
+ struct device *dev;
+ struct pinctrl_dev *pctl;
+
+ int nbanks;
+
+ uint32_t *mux_mask;
+ int nmux;
+
+ struct oxnas_pmx_func *functions;
+ int nfunctions;
+
+ struct oxnas_pin_group *groups;
+ int ngroups;
+};
+
+static const inline struct oxnas_pin_group *oxnas_pinctrl_find_group_by_name(
+ const struct oxnas_pinctrl *info,
+ const char *name)
+{
+ const struct oxnas_pin_group *grp = NULL;
+ int i;
+
+ for (i = 0; i < info->ngroups; i++) {
+ if (strcmp(info->groups[i].name, name))
+ continue;
+
+ grp = &info->groups[i];
+ dev_dbg(info->dev, "%s: %d 0:%d\n", name, grp->npins,
+ grp->pins[0]);
+ break;
+ }
+
+ return grp;
+}
+
+static int oxnas_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+ return info->ngroups;
+}
+
+static const char *oxnas_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+ return info->groups[selector].name;
+}
+
+static int oxnas_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
+ const unsigned **pins,
+ unsigned *npins)
+{
+ struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+ if (selector >= info->ngroups)
+ return -EINVAL;
+
+ *pins = info->groups[selector].pins;
+ *npins = info->groups[selector].npins;
+
+ return 0;
+}
+
+static void oxnas_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
+ unsigned offset)
+{
+ seq_printf(s, "%s", dev_name(pctldev->dev));
+}
+
+static int oxnas_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map, unsigned *num_maps)
+{
+ struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+ const struct oxnas_pin_group *grp;
+ struct pinctrl_map *new_map;
+ struct device_node *parent;
+ int map_num = 1;
+ int i;
+
+ /*
+ * first find the group of this node and check if we need create
+ * config maps for pins
+ */
+ grp = oxnas_pinctrl_find_group_by_name(info, np->name);
+ if (!grp) {
+ dev_err(info->dev, "unable to find group for node %s\n",
+ np->name);
+ return -EINVAL;
+ }
+
+ map_num += grp->npins;
+ new_map = devm_kzalloc(pctldev->dev, sizeof(*new_map) * map_num,
+ GFP_KERNEL);
+ if (!new_map)
+ return -ENOMEM;
+
+ *map = new_map;
+ *num_maps = map_num;
+
+ /* create mux map */
+ parent = of_get_parent(np);
+ if (!parent) {
+ devm_kfree(pctldev->dev, new_map);
+ return -EINVAL;
+ }
+ new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
+ new_map[0].data.mux.function = parent->name;
+ new_map[0].data.mux.group = np->name;
+ of_node_put(parent);
+
+ /* create config map */
+ new_map++;
+ for (i = 0; i < grp->npins; i++) {
+ new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
+ new_map[i].data.configs.group_or_pin =
+ pin_get_name(pctldev, grp->pins[i]);
+ new_map[i].data.configs.configs = &grp->pins_conf[i].conf;
+ new_map[i].data.configs.num_configs = 1;
+ }
+
+ dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n",
+ (*map)->data.mux.function, (*map)->data.mux.group, map_num);
+
+ return 0;
+}
+
+static void oxnas_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps)
+{
+}
+
+static const struct pinctrl_ops oxnas_pctrl_ops = {
+ .get_groups_count = oxnas_get_groups_count,
+ .get_group_name = oxnas_get_group_name,
+ .get_group_pins = oxnas_get_group_pins,
+ .pin_dbg_show = oxnas_pin_dbg_show,
+ .dt_node_to_map = oxnas_dt_node_to_map,
+ .dt_free_map = oxnas_dt_free_map,
+};
+
+static void __iomem *pin_to_gpioctrl(struct oxnas_pinctrl *info,
+ unsigned int bank)
+{
+ return gpio_chips[bank]->regbase;
+}
+
+static void __iomem *pin_to_muxctrl(struct oxnas_pinctrl *info,
+ unsigned int bank)
+{
+ return gpio_chips[bank]->ctrlbase;
+}
+
+
+static inline int pin_to_bank(unsigned pin)
+{
+ return pin / MAX_NB_GPIO_PER_BANK;
+}
+
+static unsigned pin_to_mask(unsigned int pin)
+{
+ return 1 << pin;
+}
+
+static void oxnas_mux_disable_interrupt(void __iomem *pio, unsigned mask)
+{
+ oxnas_register_clear_mask(pio + RE_IRQ_ENABLE, mask);
+ oxnas_register_clear_mask(pio + FE_IRQ_ENABLE, mask);
+}
+
+static unsigned oxnas_mux_get_pullup(void __iomem *pio, unsigned pin)
+{
+ return (readl_relaxed(pio + PULL_ENABLE) & BIT(pin)) &&
+ (readl_relaxed(pio + PULL_SENSE) & BIT(pin));
+}
+
+static void oxnas_mux_set_pullup(void __iomem *pio, unsigned mask, bool on)
+{
+ if (on) {
+ oxnas_register_set_mask(pio + PULL_SENSE, mask);
+ oxnas_register_set_mask(pio + PULL_ENABLE, mask);
+ } else {
+ oxnas_register_clear_mask(pio + PULL_ENABLE, mask);
+ }
+}
+
+static bool oxnas_mux_get_pulldown(void __iomem *pio, unsigned pin)
+{
+ return (readl_relaxed(pio + PULL_ENABLE) & BIT(pin)) &&
+ (!(readl_relaxed(pio + PULL_SENSE) & BIT(pin)));
+}
+
+static void oxnas_mux_set_pulldown(void __iomem *pio, unsigned mask, bool on)
+{
+ if (on) {
+ oxnas_register_clear_mask(pio + PULL_SENSE, mask);
+ oxnas_register_set_mask(pio + PULL_ENABLE, mask);
+ } else {
+ oxnas_register_clear_mask(pio + PULL_ENABLE, mask);
+ };
+}
+
+/* unfortunately debounce control are shared */
+static bool oxnas_mux_get_debounce(void __iomem *pio, unsigned pin, u32 *div)
+{
+ *div = __raw_readl(pio + CLOCK_DIV) & DEBOUNCE_MASK;
+ return __raw_readl(pio + DEBOUNCE_ENABLE) & BIT(pin);
+}
+
+static void oxnas_mux_set_debounce(void __iomem *pio, unsigned mask,
+ bool is_on, u32 div)
+{
+ if (is_on) {
+ oxnas_register_value_mask(pio + CLOCK_DIV, DEBOUNCE_MASK, div);
+ oxnas_register_set_mask(pio + DEBOUNCE_ENABLE, mask);
+ } else {
+ oxnas_register_clear_mask(pio + DEBOUNCE_ENABLE, mask);
+ }
+}
+
+
+static void oxnas_mux_set_func2(void __iomem *cio, unsigned mask)
+{
+/* in fact, SECONDARY takes precedence, so clear others is not necessary */
+ oxnas_register_set_mask(cio + PINMUX_SECONDARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
+}
+
+static void oxnas_mux_set_func3(void __iomem *cio, unsigned mask)
+{
+ oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask);
+ oxnas_register_set_mask(cio + PINMUX_TERTIARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
+}
+
+static void oxnas_mux_set_func4(void __iomem *cio, unsigned mask)
+{
+ oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask);
+ oxnas_register_set_mask(cio + PINMUX_QUATERNARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
+}
+
+static void oxnas_mux_set_func_dbg(void __iomem *cio, unsigned mask)
+{
+ oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask);
+ oxnas_register_set_mask(cio + PINMUX_DEBUG_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
+}
+
+static void oxnas_mux_set_func_alt(void __iomem *cio, unsigned mask)
+{
+ oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask);
+ oxnas_register_set_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
+}
+
+static void oxnas_mux_set_gpio(void __iomem *cio, unsigned mask)
+{
+ oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask);
+ oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
+}
+
+static enum oxnas_mux oxnas_mux_get_func(void __iomem *cio, unsigned mask)
+{
+ if (readl_relaxed(cio + PINMUX_SECONDARY_SEL) & mask)
+ return OXNAS_PINMUX_FUNC2;
+ if (readl_relaxed(cio + PINMUX_TERTIARY_SEL) & mask)
+ return OXNAS_PINMUX_FUNC3;
+ if (readl_relaxed(cio + PINMUX_QUATERNARY_SEL) & mask)
+ return OXNAS_PINMUX_FUNC4;
+ if (readl_relaxed(cio + PINMUX_DEBUG_SEL) & mask)
+ return OXNAS_PINMUX_DEBUG;
+ if (readl_relaxed(cio + PINMUX_ALTERNATIVE_SEL) & mask)
+ return OXNAS_PINMUX_ALT;
+ return OXNAS_PINMUX_GPIO;
+}
+
+
+static void oxnas_pin_dbg(const struct device *dev,
+ const struct oxnas_pmx_pin *pin)
+{
+ if (pin->mux) {
+ dev_dbg(dev,
+ "MF_%c%d configured as periph%c with conf = 0x%lu\n",
+ pin->bank + 'A', pin->pin, pin->mux - 1 + 'A',
+ pin->conf);
+ } else {
+ dev_dbg(dev, "MF_%c%d configured as gpio with conf = 0x%lu\n",
+ pin->bank + 'A', pin->pin, pin->conf);
+ }
+}
+
+static int pin_check_config(struct oxnas_pinctrl *info, const char *name,
+ int index, const struct oxnas_pmx_pin *pin)
+{
+ int mux;
+
+ /* check if it's a valid config */
+ if (pin->bank >= info->nbanks) {
+ dev_err(info->dev, "%s: pin conf %d bank_id %d >= nbanks %d\n",
+ name, index, pin->bank, info->nbanks);
+ return -EINVAL;
+ }
+
+ if (pin->pin >= MAX_NB_GPIO_PER_BANK) {
+ dev_err(info->dev, "%s: pin conf %d pin_bank_id %d >= %d\n",
+ name, index, pin->pin, MAX_NB_GPIO_PER_BANK);
+ return -EINVAL;
+ }
+ /* gpio always allowed */
+ if (!pin->mux)
+ return 0;
+
+ mux = pin->mux - 1;
+
+ if (mux >= info->nmux) {
+ dev_err(info->dev, "%s: pin conf %d mux_id %d >= nmux %d\n",
+ name, index, mux, info->nmux);
+ return -EINVAL;
+ }
+
+ if (!(info->mux_mask[pin->bank * info->nmux + mux] & 1 << pin->pin)) {
+ dev_err(info->dev, "%s: pin conf %d mux_id %d not supported for MF_%c%d\n",
+ name, index, mux, pin->bank + 'A', pin->pin);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void oxnas_mux_gpio_enable(void __iomem *cio, void __iomem *pio,
+ unsigned mask, bool input)
+{
+ oxnas_mux_set_gpio(cio, mask);
+ if (input)
+ writel_relaxed(mask, pio + OUTPUT_EN_CLEAR);
+ else
+ writel_relaxed(mask, pio + OUTPUT_EN_SET);
+}
+
+static void oxnas_mux_gpio_disable(void __iomem *cio, void __iomem *pio,
+ unsigned mask)
+{
+ /* when switch to other function, gpio is disabled automatically */
+ return;
+}
+
+static int oxnas_pmx_set_mux(struct pinctrl_dev *pctldev, unsigned selector,
+ unsigned group)
+{
+ struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+ const struct oxnas_pmx_pin *pins_conf = info->groups[group].pins_conf;
+ const struct oxnas_pmx_pin *pin;
+ uint32_t npins = info->groups[group].npins;
+ int i, ret;
+ unsigned mask;
+ void __iomem *pio;
+ void __iomem *cio;
+
+ dev_dbg(info->dev, "enable function %s group %s\n",
+ info->functions[selector].name, info->groups[group].name);
+
+ /* first check that all the pins of the group are valid with a valid
+ * paramter */
+ for (i = 0; i < npins; i++) {
+ pin = &pins_conf[i];
+ ret = pin_check_config(info, info->groups[group].name, i, pin);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < npins; i++) {
+ pin = &pins_conf[i];
+ oxnas_pin_dbg(info->dev, pin);
+
+ pio = pin_to_gpioctrl(info, pin->bank);
+ cio = pin_to_muxctrl(info, pin->bank);
+
+ mask = pin_to_mask(pin->pin);
+ oxnas_mux_disable_interrupt(pio, mask);
+
+ switch (pin->mux) {
+ case OXNAS_PINMUX_GPIO:
+ oxnas_mux_gpio_enable(cio, pio, mask, 1);
+ break;
+ case OXNAS_PINMUX_FUNC2:
+ oxnas_mux_set_func2(cio, mask);
+ break;
+ case OXNAS_PINMUX_FUNC3:
+ oxnas_mux_set_func3(cio, mask);
+ break;
+ case OXNAS_PINMUX_FUNC4:
+ oxnas_mux_set_func4(cio, mask);
+ break;
+ case OXNAS_PINMUX_DEBUG:
+ oxnas_mux_set_func_dbg(cio, mask);
+ break;
+ case OXNAS_PINMUX_ALT:
+ oxnas_mux_set_func_alt(cio, mask);
+ break;
+ }
+ if (pin->mux)
+ oxnas_mux_gpio_disable(cio, pio, mask);
+ }
+
+ return 0;
+}
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 16, 0))
+static void oxnas_pmx_disable(struct pinctrl_dev *pctldev, unsigned selector,
+ unsigned group)
+{
+ struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+ const struct oxnas_pmx_pin *pins_conf = info->groups[group].pins_conf;
+ const struct oxnas_pmx_pin *pin;
+ uint32_t npins = info->groups[group].npins;
+ int i;
+ unsigned mask;
+ void __iomem *pio;
+ void __iomem *cio;
+
+ for (i = 0; i < npins; i++) {
+ pin = &pins_conf[i];
+ oxnas_pin_dbg(info->dev, pin);
+ pio = pin_to_gpioctrl(info, pin->bank);
+ cio = pin_to_muxctrl(info, pin->bank);
+ mask = pin_to_mask(pin->pin);
+ oxnas_mux_gpio_enable(cio, pio, mask, 1);
+ }
+}
+#endif
+
+static int oxnas_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+ struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+ return info->nfunctions;
+}
+
+static const char *oxnas_pmx_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+ return info->functions[selector].name;
+}
+
+static int oxnas_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = info->functions[selector].groups;
+ *num_groups = info->functions[selector].ngroups;
+
+ return 0;
+}
+
+static int oxnas_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct oxnas_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+ struct oxnas_gpio_chip *oxnas_chip;
+ struct gpio_chip *chip;
+ unsigned mask;
+
+ if (!range) {
+ dev_err(npct->dev, "invalid range\n");
+ return -EINVAL;
+ }
+ if (!range->gc) {
+ dev_err(npct->dev, "missing GPIO chip in range\n");
+ return -EINVAL;
+ }
+ chip = range->gc;
+ oxnas_chip = container_of(chip, struct oxnas_gpio_chip, chip);
+
+ dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset);
+
+ mask = 1 << (offset - chip->base);
+
+ dev_dbg(npct->dev, "enable pin %u as MF_%c%d 0x%x\n",
+ offset, 'A' + range->id, offset - chip->base, mask);
+
+ oxnas_mux_set_gpio(oxnas_chip->ctrlbase, mask);
+
+ return 0;
+}
+
+static void oxnas_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct oxnas_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+
+ dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset);
+ /* Set the pin to some default state, GPIO is usually default */
+}
+
+static const struct pinmux_ops oxnas_pmx_ops = {
+ .get_functions_count = oxnas_pmx_get_funcs_count,
+ .get_function_name = oxnas_pmx_get_func_name,
+ .get_function_groups = oxnas_pmx_get_groups,
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 18, 0))
+ .set_mux = oxnas_pmx_set_mux,
+#else
+ .enable = oxnas_pmx_set_mux,
+#endif
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 16, 0))
+ .disable = oxnas_pmx_disable,
+#endif
+ .gpio_request_enable = oxnas_gpio_request_enable,
+ .gpio_disable_free = oxnas_gpio_disable_free,
+};
+
+static int oxnas_pinconf_get(struct pinctrl_dev *pctldev,
+ unsigned pin_id, unsigned long *config)
+{
+ struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+ void __iomem *pio;
+ unsigned pin;
+ int div;
+
+ dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__,
+ __LINE__, pin_id, *config);
+ pio = pin_to_gpioctrl(info, pin_to_bank(pin_id));
+ pin = pin_id % MAX_NB_GPIO_PER_BANK;
+
+ if (oxnas_mux_get_pullup(pio, pin))
+ *config |= PULL_UP;
+
+ if (oxnas_mux_get_pulldown(pio, pin))
+ *config |= PULL_DOWN;
+
+ if (oxnas_mux_get_debounce(pio, pin, &div))
+ *config |= DEBOUNCE | div;
+ return 0;
+}
+
+static int oxnas_pinconf_set(struct pinctrl_dev *pctldev,
+ unsigned pin_id, unsigned long *configs,
+ unsigned num_configs)
+{
+ struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+ unsigned mask;
+ void __iomem *pio;
+ int i;
+ unsigned long config;
+
+ pio = pin_to_gpioctrl(info, pin_to_bank(pin_id));
+ mask = pin_to_mask(pin_id % MAX_NB_GPIO_PER_BANK);
+
+ for (i = 0; i < num_configs; i++) {
+ config = configs[i];
+
+ dev_dbg(info->dev,
+ "%s:%d, pin_id=%d, config=0x%lx",
+ __func__, __LINE__, pin_id, config);
+
+ if ((config & PULL_UP) && (config & PULL_DOWN))
+ return -EINVAL;
+
+ oxnas_mux_set_pullup(pio, mask, config & PULL_UP);
+ oxnas_mux_set_pulldown(pio, mask, config & PULL_DOWN);
+ oxnas_mux_set_debounce(pio, mask, config & DEBOUNCE,
+ config & DEBOUNCE_MASK);
+
+ } /* for each config */
+
+ return 0;
+}
+
+static void oxnas_pinconf_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s, unsigned pin_id)
+{
+
+}
+
+static void oxnas_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s, unsigned group)
+{
+}
+
+static const struct pinconf_ops oxnas_pinconf_ops = {
+ .pin_config_get = oxnas_pinconf_get,
+ .pin_config_set = oxnas_pinconf_set,
+ .pin_config_dbg_show = oxnas_pinconf_dbg_show,
+ .pin_config_group_dbg_show = oxnas_pinconf_group_dbg_show,
+};
+
+static struct pinctrl_desc oxnas_pinctrl_desc = {
+ .pctlops = &oxnas_pctrl_ops,
+ .pmxops = &oxnas_pmx_ops,
+ .confops = &oxnas_pinconf_ops,
+ .owner = THIS_MODULE,
+};
+
+static const char *gpio_compat = "plxtech,nas782x-gpio";
+
+static void oxnas_pinctrl_child_count(struct oxnas_pinctrl *info,
+ struct device_node *np)
+{
+ struct device_node *child;
+
+ for_each_child_of_node(np, child) {
+ if (of_device_is_compatible(child, gpio_compat)) {
+ info->nbanks++;
+ } else {
+ info->nfunctions++;
+ info->ngroups += of_get_child_count(child);
+ }
+ }
+}
+
+static int oxnas_pinctrl_mux_mask(struct oxnas_pinctrl *info,
+ struct device_node *np)
+{
+ int ret = 0;
+ int size;
+ const __be32 *list;
+
+ list = of_get_property(np, "plxtech,mux-mask", &size);
+ if (!list) {
+ dev_err(info->dev, "can not read the mux-mask of %d\n", size);
+ return -EINVAL;
+ }
+
+ size /= sizeof(*list);
+ if (!size || size % info->nbanks) {
+ dev_err(info->dev, "wrong mux mask array should be by %d\n",
+ info->nbanks);
+ return -EINVAL;
+ }
+ info->nmux = size / info->nbanks;
+
+ info->mux_mask = devm_kzalloc(info->dev, sizeof(u32) * size, GFP_KERNEL);
+ if (!info->mux_mask) {
+ dev_err(info->dev, "could not alloc mux_mask\n");
+ return -ENOMEM;
+ }
+
+ ret = of_property_read_u32_array(np, "plxtech,mux-mask",
+ info->mux_mask, size);
+ if (ret)
+ dev_err(info->dev, "can not read the mux-mask of %d\n", size);
+ return ret;
+}
+
+static int oxnas_pinctrl_parse_groups(struct device_node *np,
+ struct oxnas_pin_group *grp,
+ struct oxnas_pinctrl *info, u32 index)
+{
+ struct oxnas_pmx_pin *pin;
+ int size;
+ const __be32 *list;
+ int i, j;
+
+ dev_dbg(info->dev, "group(%d): %s\n", index, np->name);
+
+ /* Initialise group */
+ grp->name = np->name;
+
+ /*
+ * the binding format is plxtech,pins = <bank pin mux CONFIG ...>,
+ * do sanity check and calculate pins number
+ */
+ list = of_get_property(np, "plxtech,pins", &size);
+ /* we do not check return since it's safe node passed down */
+ size /= sizeof(*list);
+ if (!size || size % 4) {
+ dev_err(info->dev, "wrong pins number or pins and configs"
+ " should be divisible by 4\n");
+ return -EINVAL;
+ }
+
+ grp->npins = size / 4;
+ pin = grp->pins_conf = devm_kzalloc(info->dev,
+ grp->npins * sizeof(struct oxnas_pmx_pin),
+ GFP_KERNEL);
+ grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int),
+ GFP_KERNEL);
+ if (!grp->pins_conf || !grp->pins)
+ return -ENOMEM;
+
+ for (i = 0, j = 0; i < size; i += 4, j++) {
+ pin->bank = be32_to_cpu(*list++);
+ pin->pin = be32_to_cpu(*list++);
+ grp->pins[j] = pin->bank * MAX_NB_GPIO_PER_BANK + pin->pin;
+ pin->mux = be32_to_cpu(*list++);
+ pin->conf = be32_to_cpu(*list++);
+
+ oxnas_pin_dbg(info->dev, pin);
+ pin++;
+ }
+
+ return 0;
+}
+
+static int oxnas_pinctrl_parse_functions(struct device_node *np,
+ struct oxnas_pinctrl *info, u32 index)
+{
+ struct device_node *child;
+ struct oxnas_pmx_func *func;
+ struct oxnas_pin_group *grp;
+ int ret;
+ static u32 grp_index;
+ u32 i = 0;
+
+ dev_dbg(info->dev, "parse function(%d): %s\n", index, np->name);
+
+ func = &info->functions[index];
+
+ /* Initialise function */
+ func->name = np->name;
+ func->ngroups = of_get_child_count(np);
+ if (func->ngroups <= 0) {
+ dev_err(info->dev, "no groups defined\n");
+ return -EINVAL;
+ }
+ func->groups = devm_kzalloc(info->dev,
+ func->ngroups * sizeof(char *), GFP_KERNEL);
+ if (!func->groups)
+ return -ENOMEM;
+
+ for_each_child_of_node(np, child) {
+ func->groups[i] = child->name;
+ grp = &info->groups[grp_index++];
+ ret = oxnas_pinctrl_parse_groups(child, grp, info, i++);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct of_device_id oxnas_pinctrl_of_match[] = {
+ { .compatible = "plxtech,nas782x-pinctrl"},
+ { /* sentinel */ }
+};
+
+static int oxnas_pinctrl_probe_dt(struct platform_device *pdev,
+ struct oxnas_pinctrl *info)
+{
+ int ret = 0;
+ int i, j;
+ uint32_t *tmp;
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *child;
+
+ if (!np)
+ return -ENODEV;
+
+ info->dev = &pdev->dev;
+
+ oxnas_pinctrl_child_count(info, np);
+
+ if (info->nbanks < 1) {
+ dev_err(&pdev->dev, "you need to specify atleast one gpio-controller\n");
+ return -EINVAL;
+ }
+
+ ret = oxnas_pinctrl_mux_mask(info, np);
+ if (ret)
+ return ret;
+
+ dev_dbg(&pdev->dev, "nmux = %d\n", info->nmux);
+
+ dev_dbg(&pdev->dev, "mux-mask\n");
+ tmp = info->mux_mask;
+ for (i = 0; i < info->nbanks; i++)
+ for (j = 0; j < info->nmux; j++, tmp++)
+ dev_dbg(&pdev->dev, "%d:%d\t0x%x\n", i, j, tmp[0]);
+
+ dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
+ dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
+ info->functions = devm_kzalloc(&pdev->dev, info->nfunctions *
+ sizeof(struct oxnas_pmx_func),
+ GFP_KERNEL);
+ if (!info->functions)
+ return -ENOMEM;
+
+ info->groups = devm_kzalloc(&pdev->dev, info->ngroups *
+ sizeof(struct oxnas_pin_group),
+ GFP_KERNEL);
+ if (!info->groups)
+ return -ENOMEM;
+
+ dev_dbg(&pdev->dev, "nbanks = %d\n", info->nbanks);
+ dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
+ dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
+
+ i = 0;
+
+ for_each_child_of_node(np, child) {
+ if (of_device_is_compatible(child, gpio_compat))
+ continue;
+ ret = oxnas_pinctrl_parse_functions(child, info, i++);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to parse function\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int oxnas_pinctrl_probe(struct platform_device *pdev)
+{
+ struct oxnas_pinctrl *info;
+ struct pinctrl_pin_desc *pdesc;
+ int ret, i, j, k;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ ret = oxnas_pinctrl_probe_dt(pdev, info);
+ if (ret)
+ return ret;
+
+ /*
+ * We need all the GPIO drivers to probe FIRST, or we will not be able
+ * to obtain references to the struct gpio_chip * for them, and we
+ * need this to proceed.
+ */
+ for (i = 0; i < info->nbanks; i++) {
+ if (!gpio_chips[i]) {
+ dev_warn(&pdev->dev,
+ "GPIO chip %d not registered yet\n", i);
+ devm_kfree(&pdev->dev, info);
+ return -EPROBE_DEFER;
+ }
+ }
+
+ oxnas_pinctrl_desc.name = dev_name(&pdev->dev);
+ oxnas_pinctrl_desc.npins = info->nbanks * MAX_NB_GPIO_PER_BANK;
+ oxnas_pinctrl_desc.pins = pdesc =
+ devm_kzalloc(&pdev->dev, sizeof(*pdesc) *
+ oxnas_pinctrl_desc.npins, GFP_KERNEL);
+
+ if (!oxnas_pinctrl_desc.pins)
+ return -ENOMEM;
+
+ for (i = 0 , k = 0; i < info->nbanks; i++) {
+ for (j = 0; j < MAX_NB_GPIO_PER_BANK; j++, k++) {
+ pdesc->number = k;
+ pdesc->name = kasprintf(GFP_KERNEL, "MF_%c%d", i + 'A',
+ j);
+ pdesc++;
+ }
+ }
+
+ platform_set_drvdata(pdev, info);
+ info->pctl = pinctrl_register(&oxnas_pinctrl_desc, &pdev->dev, info);
+
+ if (!info->pctl) {
+ dev_err(&pdev->dev, "could not register OX820 pinctrl driver\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* We will handle a range of GPIO pins */
+ for (i = 0; i < info->nbanks; i++)
+ pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range);
+
+ dev_info(&pdev->dev, "initialized OX820 pinctrl driver\n");
+
+ return 0;
+
+err:
+ return ret;
+}
+
+static int oxnas_pinctrl_remove(struct platform_device *pdev)
+{
+ struct oxnas_pinctrl *info = platform_get_drvdata(pdev);
+
+ pinctrl_unregister(info->pctl);
+
+ return 0;
+}
+
+static int oxnas_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ /*
+ * Map back to global GPIO space and request muxing, the direction
+ * parameter does not matter for this controller.
+ */
+ int gpio = chip->base + offset;
+ int bank = chip->base / chip->ngpio;
+
+ dev_dbg(chip->dev, "%s:%d MF_%c%d(%d)\n", __func__, __LINE__,
+ 'A' + bank, offset, gpio);
+
+ return pinctrl_request_gpio(gpio);
+}
+
+static void oxnas_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ pinctrl_free_gpio(gpio);
+}
+
+static int oxnas_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
+ void __iomem *pio = oxnas_gpio->regbase;
+
+ writel_relaxed(BIT(offset), pio + OUTPUT_EN_CLEAR);
+ return 0;
+}
+
+static int oxnas_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
+ void __iomem *pio = oxnas_gpio->regbase;
+ unsigned mask = 1 << offset;
+ u32 pdsr;
+
+ pdsr = readl_relaxed(pio + INPUT_VALUE);
+ return (pdsr & mask) != 0;
+}
+
+static void oxnas_gpio_set(struct gpio_chip *chip, unsigned offset,
+ int val)
+{
+ struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
+ void __iomem *pio = oxnas_gpio->regbase;
+
+ if (val)
+ writel_relaxed(BIT(offset), pio + OUTPUT_SET);
+ else
+ writel_relaxed(BIT(offset), pio + OUTPUT_CLEAR);
+
+}
+
+static int oxnas_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int val)
+{
+ struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
+ void __iomem *pio = oxnas_gpio->regbase;
+
+ if (val)
+ writel_relaxed(BIT(offset), pio + OUTPUT_SET);
+ else
+ writel_relaxed(BIT(offset), pio + OUTPUT_CLEAR);
+
+ writel_relaxed(BIT(offset), pio + OUTPUT_EN_SET);
+
+ return 0;
+}
+
+static int oxnas_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
+ int virq;
+
+ if (offset < chip->ngpio)
+ virq = irq_create_mapping(oxnas_gpio->domain, offset);
+ else
+ virq = -ENXIO;
+
+ dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n",
+ chip->label, offset + chip->base, virq);
+ return virq;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void oxnas_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ enum oxnas_mux mode;
+ int i;
+ struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
+ void __iomem *pio = oxnas_gpio->regbase;
+ void __iomem *cio = oxnas_gpio->ctrlbase;
+
+ for (i = 0; i < chip->ngpio; i++) {
+ unsigned pin = chip->base + i;
+ unsigned mask = pin_to_mask(pin);
+ const char *gpio_label;
+ u32 pdsr;
+
+ gpio_label = gpiochip_is_requested(chip, i);
+ if (!gpio_label)
+ continue;
+ /* FIXME */
+ mode = oxnas_mux_get_func(cio, mask);
+ seq_printf(s, "[%s] GPIO%s%d: ",
+ gpio_label, chip->label, i);
+ if (mode == OXNAS_PINMUX_GPIO) {
+ pdsr = readl_relaxed(pio + INPUT_VALUE);
+
+ seq_printf(s, "[gpio] %s\n",
+ pdsr & mask ?
+ "set" : "clear");
+ } else {
+ seq_printf(s, "[periph %c]\n",
+ mode + 'A' - 1);
+ }
+ }
+}
+#else
+#define oxnas_gpio_dbg_show NULL
+#endif
+
+/* Several AIC controller irqs are dispatched through this GPIO handler.
+ * To use any AT91_PIN_* as an externally triggered IRQ, first call
+ * oxnas_set_gpio_input() then maybe enable its glitch filter.
+ * Then just request_irq() with the pin ID; it works like any ARM IRQ
+ * handler.
+ */
+
+static void gpio_irq_mask(struct irq_data *d)
+{
+ struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(d);
+ void __iomem *pio = oxnas_gpio->regbase;
+ unsigned mask = 1 << d->hwirq;
+ unsigned type = irqd_get_trigger_type(d);
+
+ /* FIXME: need proper lock */
+ if (type & IRQ_TYPE_EDGE_RISING)
+ oxnas_register_clear_mask(pio + RE_IRQ_ENABLE, mask);
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ oxnas_register_clear_mask(pio + FE_IRQ_ENABLE, mask);
+}
+
+static void gpio_irq_unmask(struct irq_data *d)
+{
+ struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(d);
+ void __iomem *pio = oxnas_gpio->regbase;
+ unsigned mask = 1 << d->hwirq;
+ unsigned type = irqd_get_trigger_type(d);
+
+ /* FIXME: need proper lock */
+ if (type & IRQ_TYPE_EDGE_RISING)
+ oxnas_register_set_mask(pio + RE_IRQ_ENABLE, mask);
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ oxnas_register_set_mask(pio + FE_IRQ_ENABLE, mask);
+}
+
+
+static int gpio_irq_type(struct irq_data *d, unsigned type)
+{
+ if ((type & IRQ_TYPE_EDGE_BOTH) == 0) {
+ pr_warn("OX820: Unsupported type for irq %d\n",
+ gpio_to_irq(d->irq));
+ return -EINVAL;
+ }
+ /* seems no way to set trigger type without enable irq, so leave it to unmask time */
+
+ return 0;
+}
+
+static struct irq_chip gpio_irqchip = {
+ .name = "GPIO",
+ .irq_disable = gpio_irq_mask,
+ .irq_mask = gpio_irq_mask,
+ .irq_unmask = gpio_irq_unmask,
+ .irq_set_type = gpio_irq_type,
+};
+
+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct irq_data *idata = irq_desc_get_irq_data(desc);
+ struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(idata);
+ void __iomem *pio = oxnas_gpio->regbase;
+ unsigned long isr;
+ int n;
+
+ chained_irq_enter(chip, desc);
+ for (;;) {
+ /* TODO: see if it works */
+ isr = readl_relaxed(pio + IRQ_PENDING);
+ if (!isr)
+ break;
+ /* acks pending interrupts */
+ writel_relaxed(isr, pio + IRQ_PENDING);
+
+ for_each_set_bit(n, &isr, BITS_PER_LONG) {
+ generic_handle_irq(irq_find_mapping(oxnas_gpio->domain,
+ n));
+ }
+ }
+ chained_irq_exit(chip, desc);
+ /* now it may re-trigger */
+}
+
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
+static int oxnas_gpio_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct oxnas_gpio_chip *oxnas_gpio = h->host_data;
+
+ irq_set_lockdep_class(virq, &gpio_lock_class);
+
+ irq_set_chip_and_handler(virq, &gpio_irqchip, handle_edge_irq);
+ set_irq_flags(virq, IRQF_VALID);
+ irq_set_chip_data(virq, oxnas_gpio);
+
+ return 0;
+}
+
+static int oxnas_gpio_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *ctrlr,
+ const u32 *intspec,
+ unsigned int intsize,
+ irq_hw_number_t *out_hwirq,
+ unsigned int *out_type)
+{
+ struct oxnas_gpio_chip *oxnas_gpio = d->host_data;
+ int ret;
+ int pin = oxnas_gpio->chip.base + intspec[0];
+
+ if (WARN_ON(intsize < 2))
+ return -EINVAL;
+ *out_hwirq = intspec[0];
+ *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+
+ ret = gpio_request(pin, ctrlr->full_name);
+ if (ret)
+ return ret;
+
+ ret = gpio_direction_input(pin);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static struct irq_domain_ops oxnas_gpio_ops = {
+ .map = oxnas_gpio_irq_map,
+ .xlate = oxnas_gpio_irq_domain_xlate,
+};
+
+static int oxnas_gpio_of_irq_setup(struct device_node *node,
+ struct oxnas_gpio_chip *oxnas_gpio,
+ unsigned int irq)
+{
+ /* Disable irqs of this controller */
+ writel_relaxed(0, oxnas_gpio->regbase + RE_IRQ_ENABLE);
+ writel_relaxed(0, oxnas_gpio->regbase + FE_IRQ_ENABLE);
+
+ /* Setup irq domain */
+ oxnas_gpio->domain = irq_domain_add_linear(node, oxnas_gpio->chip.ngpio,
+ &oxnas_gpio_ops, oxnas_gpio);
+ if (!oxnas_gpio->domain)
+ panic("oxnas_gpio: couldn't allocate irq domain (DT).\n");
+
+ irq_set_chip_data(irq, oxnas_gpio);
+ irq_set_chained_handler(irq, gpio_irq_handler);
+
+ return 0;
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip oxnas_gpio_template = {
+ .request = oxnas_gpio_request,
+ .free = oxnas_gpio_free,
+ .direction_input = oxnas_gpio_direction_input,
+ .get = oxnas_gpio_get,
+ .direction_output = oxnas_gpio_direction_output,
+ .set = oxnas_gpio_set,
+ .to_irq = oxnas_gpio_to_irq,
+ .dbg_show = oxnas_gpio_dbg_show,
+ .can_sleep = 0,
+ .ngpio = MAX_NB_GPIO_PER_BANK,
+};
+
+static struct of_device_id oxnas_gpio_of_match[] = {
+ { .compatible = "plxtech,nas782x-gpio"},
+ { /* sentinel */ }
+};
+
+static int oxnas_gpio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct resource *res;
+ struct oxnas_gpio_chip *oxnas_chip = NULL;
+ struct gpio_chip *chip;
+ struct pinctrl_gpio_range *range;
+ int ret = 0;
+ int irq, i;
+ int alias_idx = of_alias_get_id(np, "gpio");
+ uint32_t ngpio;
+ char **names;
+
+ BUG_ON(alias_idx >= ARRAY_SIZE(gpio_chips));
+ if (gpio_chips[alias_idx]) {
+ ret = -EBUSY;
+ goto err;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = irq;
+ goto err;
+ }
+
+ oxnas_chip = devm_kzalloc(&pdev->dev, sizeof(*oxnas_chip), GFP_KERNEL);
+ if (!oxnas_chip) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ oxnas_chip->regbase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(oxnas_chip->regbase)) {
+ ret = PTR_ERR(oxnas_chip->regbase);
+ goto err;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ oxnas_chip->ctrlbase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(oxnas_chip->ctrlbase)) {
+ ret = PTR_ERR(oxnas_chip->ctrlbase);
+ goto err;
+ }
+
+ oxnas_chip->chip = oxnas_gpio_template;
+
+ chip = &oxnas_chip->chip;
+ chip->of_node = np;
+ chip->label = dev_name(&pdev->dev);
+ chip->dev = &pdev->dev;
+ chip->owner = THIS_MODULE;
+ chip->base = alias_idx * MAX_NB_GPIO_PER_BANK;
+
+ if (!of_property_read_u32(np, "#gpio-lines", &ngpio)) {
+ if (ngpio > MAX_NB_GPIO_PER_BANK)
+ pr_err("oxnas_gpio.%d, gpio-nb >= %d failback to %d\n",
+ alias_idx, MAX_NB_GPIO_PER_BANK,
+ MAX_NB_GPIO_PER_BANK);
+ else
+ chip->ngpio = ngpio;
+ }
+
+ names = devm_kzalloc(&pdev->dev, sizeof(char *) * chip->ngpio,
+ GFP_KERNEL);
+
+ if (!names) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0; i < chip->ngpio; i++)
+ names[i] = kasprintf(GFP_KERNEL, "MF_%c%d", alias_idx + 'A', i);
+
+ chip->names = (const char *const *)names;
+
+ range = &oxnas_chip->range;
+ range->name = chip->label;
+ range->id = alias_idx;
+ range->pin_base = range->base = range->id * MAX_NB_GPIO_PER_BANK;
+
+ range->npins = chip->ngpio;
+ range->gc = chip;
+
+ ret = gpiochip_add(chip);
+ if (ret)
+ goto err;
+
+ gpio_chips[alias_idx] = oxnas_chip;
+ gpio_banks = max(gpio_banks, alias_idx + 1);
+
+ oxnas_gpio_of_irq_setup(np, oxnas_chip, irq);
+
+ dev_info(&pdev->dev, "at address %p\n", oxnas_chip->regbase);
+
+ return 0;
+err:
+ dev_err(&pdev->dev, "Failure %i for GPIO %i\n", ret, alias_idx);
+
+ return ret;
+}
+
+static struct platform_driver oxnas_gpio_driver = {
+ .driver = {
+ .name = "gpio-oxnas",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(oxnas_gpio_of_match),
+ },
+ .probe = oxnas_gpio_probe,
+};
+
+static struct platform_driver oxnas_pinctrl_driver = {
+ .driver = {
+ .name = "pinctrl-oxnas",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(oxnas_pinctrl_of_match),
+ },
+ .probe = oxnas_pinctrl_probe,
+ .remove = oxnas_pinctrl_remove,
+};
+
+static int __init oxnas_pinctrl_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&oxnas_gpio_driver);
+ if (ret)
+ return ret;
+ return platform_driver_register(&oxnas_pinctrl_driver);
+}
+arch_initcall(oxnas_pinctrl_init);
+
+static void __exit oxnas_pinctrl_exit(void)
+{
+ platform_driver_unregister(&oxnas_pinctrl_driver);
+}
+
+module_exit(oxnas_pinctrl_exit);
+MODULE_AUTHOR("Ma Hajun <mahaijuns@gmail.com>");
+MODULE_DESCRIPTION("Plxtech Nas782x pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/oxnas/files/drivers/reset/reset-ox820.c b/target/linux/oxnas/files/drivers/reset/reset-ox820.c
new file mode 100644
index 0000000000..0a28de55f4
--- /dev/null
+++ b/target/linux/oxnas/files/drivers/reset/reset-ox820.c
@@ -0,0 +1,107 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <mach/hardware.h>
+
+static int ox820_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ writel(BIT(id), SYS_CTRL_RST_SET_CTRL);
+ writel(BIT(id), SYS_CTRL_RST_CLR_CTRL);
+ return 0;
+}
+
+static int ox820_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ writel(BIT(id), SYS_CTRL_RST_SET_CTRL);
+
+ return 0;
+}
+
+static int ox820_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ writel(BIT(id), SYS_CTRL_RST_CLR_CTRL);
+
+ return 0;
+}
+
+static struct reset_control_ops ox820_reset_ops = {
+ .reset = ox820_reset_reset,
+ .assert = ox820_reset_assert,
+ .deassert = ox820_reset_deassert,
+};
+
+static const struct of_device_id ox820_reset_dt_ids[] = {
+ { .compatible = "plxtech,nas782x-reset", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ox820_reset_dt_ids);
+
+struct reset_controller_dev rcdev;
+
+static int ox820_reset_probe(struct platform_device *pdev)
+{
+ struct reset_controller_dev *rcdev;
+
+ rcdev = devm_kzalloc(&pdev->dev, sizeof(*rcdev), GFP_KERNEL);
+ if (!rcdev)
+ return -ENOMEM;
+
+ /* note: reset controller is statically mapped */
+
+ rcdev->owner = THIS_MODULE;
+ rcdev->nr_resets = 32;
+ rcdev->ops = &ox820_reset_ops;
+ rcdev->of_node = pdev->dev.of_node;
+ reset_controller_register(rcdev);
+ platform_set_drvdata(pdev, rcdev);
+
+ return 0;
+}
+
+static int ox820_reset_remove(struct platform_device *pdev)
+{
+ struct reset_controller_dev *rcdev = platform_get_drvdata(pdev);
+
+ reset_controller_unregister(rcdev);
+
+ return 0;
+}
+
+static struct platform_driver ox820_reset_driver = {
+ .probe = ox820_reset_probe,
+ .remove = ox820_reset_remove,
+ .driver = {
+ .name = "ox820-reset",
+ .owner = THIS_MODULE,
+ .of_match_table = ox820_reset_dt_ids,
+ },
+};
+
+static int __init ox820_reset_init(void)
+{
+ return platform_driver_probe(&ox820_reset_driver,
+ ox820_reset_probe);
+}
+/*
+ * reset controller does not support probe deferral, so it has to be
+ * initialized before any user, in particular, PCIE uses subsys_initcall.
+ */
+arch_initcall(ox820_reset_init);
+
+MODULE_AUTHOR("Ma Haijun");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c b/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c
new file mode 100644
index 0000000000..23c5061ec5
--- /dev/null
+++ b/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c
@@ -0,0 +1,316 @@
+/*
+ * drivers/usb/host/ehci-oxnas.c
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <mach/hardware.h>
+#include <mach/utils.h>
+
+#include "ehci.h"
+
+struct oxnas_hcd {
+ struct clk *clk;
+ struct clk *refsrc;
+ struct clk *phyref;
+ int use_pllb;
+ int use_phya;
+ struct reset_control *rst_host;
+ struct reset_control *rst_phya;
+ struct reset_control *rst_phyb;
+};
+
+#define DRIVER_DESC "Oxnas On-Chip EHCI Host Controller"
+
+static struct hc_driver __read_mostly oxnas_hc_driver;
+
+static void start_oxnas_usb_ehci(struct oxnas_hcd *oxnas)
+{
+ u32 reg;
+
+ if (oxnas->use_pllb) {
+ /* enable pllb */
+ clk_prepare_enable(oxnas->refsrc);
+ /* enable ref600 */
+ clk_prepare_enable(oxnas->phyref);
+ /* 600MHz pllb divider for 12MHz */
+ writel(PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0),
+ SEC_CTRL_PLLB_DIV_CTRL);
+
+ } else {
+ /* ref 300 divider for 12MHz */
+ writel(REF300_DIV_INT(25) | REF300_DIV_FRAC(0),
+ SYS_CTRL_REF300_DIV);
+ }
+
+ /* Ensure the USB block is properly reset */
+ reset_control_reset(oxnas->rst_host);
+ reset_control_reset(oxnas->rst_phya);
+ reset_control_reset(oxnas->rst_phyb);
+
+ /* Force the high speed clock to be generated all the time, via serial
+ programming of the USB HS PHY */
+ writel((2UL << USBHSPHY_TEST_ADD) |
+ (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
+
+ writel((1UL << USBHSPHY_TEST_CLK) |
+ (2UL << USBHSPHY_TEST_ADD) |
+ (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
+
+ writel((0xfUL << USBHSPHY_TEST_ADD) |
+ (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
+
+ writel((1UL << USBHSPHY_TEST_CLK) |
+ (0xfUL << USBHSPHY_TEST_ADD) |
+ (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
+
+ if (oxnas->use_pllb) /* use pllb clock */
+ writel(USB_CLK_INTERNAL | USB_INT_CLK_PLLB, SYS_CTRL_USB_CTRL);
+ else /* use ref300 derived clock */
+ writel(USB_CLK_INTERNAL | USB_INT_CLK_REF300,
+ SYS_CTRL_USB_CTRL);
+
+ if (oxnas->use_phya) {
+ /* Configure USB PHYA as a host */
+ reg = readl(SYS_CTRL_USB_CTRL);
+ reg &= ~USBAMUX_DEVICE;
+ writel(reg, SYS_CTRL_USB_CTRL);
+ }
+
+ /* Enable the clock to the USB block */
+ clk_prepare_enable(oxnas->clk);
+}
+
+static void stop_oxnas_usb_ehci(struct oxnas_hcd *oxnas)
+{
+ reset_control_assert(oxnas->rst_host);
+ reset_control_assert(oxnas->rst_phya);
+ reset_control_assert(oxnas->rst_phyb);
+
+ if (oxnas->use_pllb) {
+ clk_disable_unprepare(oxnas->phyref);
+ clk_disable_unprepare(oxnas->refsrc);
+ }
+ clk_disable_unprepare(oxnas->clk);
+}
+
+static int ehci_oxnas_reset(struct usb_hcd *hcd)
+{
+ #define txttfill_tuning reserved2[0]
+
+ struct ehci_hcd *ehci;
+ u32 tmp;
+ int retval = ehci_setup(hcd);
+ if (retval)
+ return retval;
+
+ ehci = hcd_to_ehci(hcd);
+ tmp = ehci_readl(ehci, &ehci->regs->txfill_tuning);
+ tmp &= ~0x00ff0000;
+ tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes) */
+ tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/
+ ehci_writel(ehci, tmp, &ehci->regs->txfill_tuning);
+
+ tmp = ehci_readl(ehci, &ehci->regs->txttfill_tuning);
+ tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */
+ ehci_writel(ehci, tmp, &ehci->regs->txttfill_tuning);
+
+ return retval;
+}
+
+static int ehci_oxnas_drv_probe(struct platform_device *ofdev)
+{
+ struct device_node *np = ofdev->dev.of_node;
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ struct resource res;
+ struct oxnas_hcd *oxnas;
+ int irq, err;
+ struct reset_control *rstc;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ if (!ofdev->dev.dma_mask)
+ ofdev->dev.dma_mask = &ofdev->dev.coherent_dma_mask;
+ if (!ofdev->dev.coherent_dma_mask)
+ ofdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ hcd = usb_create_hcd(&oxnas_hc_driver, &ofdev->dev,
+ dev_name(&ofdev->dev));
+ if (!hcd)
+ return -ENOMEM;
+
+ err = of_address_to_resource(np, 0, &res);
+ if (err)
+ goto err_res;
+
+ hcd->rsrc_start = res.start;
+ hcd->rsrc_len = resource_size(&res);
+
+ hcd->regs = devm_ioremap_resource(&ofdev->dev, &res);
+ if (IS_ERR(hcd->regs)) {
+ dev_err(&ofdev->dev, "devm_ioremap_resource failed\n");
+ err = PTR_ERR(hcd->regs);
+ goto err_ioremap;
+ }
+
+ oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv;
+
+ oxnas->use_pllb = of_property_read_bool(np, "plxtch,ehci_use_pllb");
+ oxnas->use_phya = of_property_read_bool(np, "plxtch,ehci_use_phya");
+
+ oxnas->clk = of_clk_get_by_name(np, "usb");
+ if (IS_ERR(oxnas->clk)) {
+ err = PTR_ERR(oxnas->clk);
+ goto err_clk;
+ }
+
+ if (oxnas->use_pllb) {
+ oxnas->refsrc = of_clk_get_by_name(np, "refsrc");
+ if (IS_ERR(oxnas->refsrc)) {
+ err = PTR_ERR(oxnas->refsrc);
+ goto err_refsrc;
+ }
+ oxnas->phyref = of_clk_get_by_name(np, "phyref");
+ if (IS_ERR(oxnas->refsrc)) {
+ err = PTR_ERR(oxnas->refsrc);
+ goto err_phyref;
+ }
+
+ } else {
+ oxnas->refsrc = NULL;
+ oxnas->phyref = NULL;
+ }
+
+ rstc = devm_reset_control_get(&ofdev->dev, "host");
+ if (IS_ERR(rstc)) {
+ err = PTR_ERR(rstc);
+ goto err_rst;
+ }
+ oxnas->rst_host = rstc;
+
+ rstc = devm_reset_control_get(&ofdev->dev, "phya");
+ if (IS_ERR(rstc)) {
+ err = PTR_ERR(rstc);
+ goto err_rst;
+ }
+ oxnas->rst_phya = rstc;
+
+ rstc = devm_reset_control_get(&ofdev->dev, "phyb");
+ if (IS_ERR(rstc)) {
+ err = PTR_ERR(rstc);
+ goto err_rst;
+ }
+ oxnas->rst_phyb = rstc;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n");
+ err = -EBUSY;
+ goto err_irq;
+ }
+
+ hcd->has_tt = 1;
+ ehci = hcd_to_ehci(hcd);
+ ehci->caps = hcd->regs;
+
+ start_oxnas_usb_ehci(oxnas);
+
+ err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+ if (err)
+ goto err_hcd;
+
+ return 0;
+
+err_hcd:
+ stop_oxnas_usb_ehci(oxnas);
+err_irq:
+err_rst:
+ if (oxnas->phyref)
+ clk_put(oxnas->phyref);
+err_phyref:
+ if (oxnas->refsrc)
+ clk_put(oxnas->refsrc);
+err_refsrc:
+ clk_put(oxnas->clk);
+err_clk:
+err_ioremap:
+err_res:
+ usb_put_hcd(hcd);
+
+ return err;
+}
+
+static int ehci_oxnas_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct oxnas_hcd *oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv;
+
+ usb_remove_hcd(hcd);
+ if (oxnas->use_pllb) {
+ clk_disable_unprepare(oxnas->phyref);
+ clk_put(oxnas->phyref);
+ clk_disable_unprepare(oxnas->refsrc);
+ clk_put(oxnas->refsrc);
+ }
+ clk_disable_unprepare(oxnas->clk);
+ usb_put_hcd(hcd);
+
+ return 0;
+}
+
+static const struct of_device_id oxnas_ehci_dt_ids[] = {
+ { .compatible = "plxtch,nas782x-ehci" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, oxnas_ehci_dt_ids);
+
+static struct platform_driver ehci_oxnas_driver = {
+ .probe = ehci_oxnas_drv_probe,
+ .remove = ehci_oxnas_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
+ .driver.name = "oxnas-ehci",
+ .driver.of_match_table = oxnas_ehci_dt_ids,
+};
+
+static const struct ehci_driver_overrides oxnas_overrides __initconst = {
+ .reset = ehci_oxnas_reset,
+ .extra_priv_size = sizeof(struct oxnas_hcd),
+};
+
+static int __init ehci_oxnas_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ ehci_init_driver(&oxnas_hc_driver, &oxnas_overrides);
+ return platform_driver_register(&ehci_oxnas_driver);
+}
+module_init(ehci_oxnas_init);
+
+static void __exit ehci_oxnas_cleanup(void)
+{
+ platform_driver_unregister(&ehci_oxnas_driver);
+}
+module_exit(ehci_oxnas_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:oxnas-ehci");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/oxnas/image/Makefile b/target/linux/oxnas/image/Makefile
new file mode 100644
index 0000000000..3a2a58d1e9
--- /dev/null
+++ b/target/linux/oxnas/image/Makefile
@@ -0,0 +1,135 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+STG212_UBI_OPTS = -m 2048 -p 128KiB -s 512
+STG212_UBIFS_OPTS = -m 2048 -e 126KiB -c 4096
+
+KD20_UBI_OPTS = -m 2048 -p 128KiB -s 512
+KD20_UBIFS_OPTS = -m 2048 -e 126KiB -c 4096
+
+POGOPLUG_PRO_UBI_OPTS = -m 2048 -p 128KiB -s 512
+POGOPLUG_PRO_UBIFS_OPTS = -m 2048 -e 126KiB -c 4096
+
+POGOPLUG_V3_UBI_OPTS = -m 2048 -p 128KiB -s 512
+POGOPLUG_V3_UBIFS_OPTS = -m 2048 -e 126KiB -c 4096
+
+KDIR_TMP:=$(KDIR)/tmp
+VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
+UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
+
+define sanitize_profile_name
+$(shell echo $(PROFILE) | tr '[:upper:]' '[:lower:]' | sed 's/_/-/g')
+endef
+
+define Image/BuildKernel/Template
+ $(CP) $(LINUX_DIR)/arch/arm/boot/dts/ox820-$(1).dtb $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb
+
+ $(call Image/BuildKernel/MkFIT,$(1),$(KDIR)/zImage,$(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb,none,0x60008000,0x60008000)
+ $(CP) $(KDIR)/fit-$(1).itb $(BIN_DIR)/$(IMG_PREFIX)-$(1)-fit-uImage.bin
+
+ ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ $(call Image/BuildKernel/MkFIT,$(1),$(KDIR)/zImage-initramfs,$(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb,none,0x60008000,0x60008000,-initramfs)
+ $(CP) $(KDIR)/fit-$(1)-initramfs.itb $(BIN_DIR)/$(IMG_PREFIX)-$(1)-fit-uImage-initramfs.itb
+ if [ -e "$(BIN_DIR)/$(IMG_PREFIX)-ox820-u-boot.bin" ]; then \
+ ( dd if=$(BIN_DIR)/$(IMG_PREFIX)-ox820-u-boot.bin bs=128k conv=sync ; dd if=$(KDIR)/fit-$(1)-initramfs.itb bs=128k conv=sync ) \
+ > $(BIN_DIR)/$(IMG_PREFIX)-$(1)-u-boot-initramfs.itb; \
+ fi
+ endif
+
+ $(CP) $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
+ $(call Image/BuildKernel/MkuImage, \
+ none, 0x60008000, 0x60008000, \
+ $(BIN_DIR)/$(IMG_PREFIX)-zImage, \
+ $(BIN_DIR)/$(IMG_PREFIX)-uImage \
+ )
+
+ ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ $(CP) $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs
+ $(call Image/BuildKernel/MkuImage, \
+ none, 0x60008000, 0x60008000, \
+ $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs, \
+ $(BIN_DIR)/$(IMG_PREFIX)-uImage-initramfs \
+ )
+ endif
+endef
+
+define Image/InstallKernel/Template
+
+ ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_KERNEL),)
+ $(INSTALL_DIR) $(TARGET_DIR)/boot
+ ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_UIMAGE),)
+ $(CP) $(BIN_DIR)/$(IMG_PREFIX)-uImage $(TARGET_DIR)/boot/
+ ln -sf $(IMG_PREFIX)-uImage $(TARGET_DIR)/boot/uImage
+ endif
+ ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_ZIMAGE),)
+ $(CP) $(BIN_DIR)/$(IMG_PREFIX)-zImage $(TARGET_DIR)/boot/
+ ln -sf $(IMG_PREFIX)-zImage $(TARGET_DIR)/boot/zImage
+ endif
+ ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_FIT),)
+ $(CP) $(BIN_DIR)/$(IMG_PREFIX)-$(1)-fit-uImage.itb $(TARGET_DIR)/boot/
+ ln -sf $(IMG_PREFIX)-$(1)-fit-uImage.itb $(TARGET_DIR)/boot/uImage.itb
+ endif
+ endif
+
+ ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_DTB),)
+ $(INSTALL_DIR) $(TARGET_DIR)/boot
+ ifneq ($(1),)
+ $(CP) $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb $(TARGET_DIR)/boot/
+ ln -sf $(IMG_PREFIX)-$(1).dtb $(TARGET_DIR)/boot/$(1).dtb
+ endif
+ endif
+endef
+
+define Image/Build/squashfs
+ $(call Image/Build/SysupgradeNAND,$(call sanitize_profile_name),$(1),$(KDIR)/fit-$(call sanitize_profile_name).itb)
+ $(call Image/Build/UbinizeImage,$(call sanitize_profile_name),--uboot-env --kernel $(KDIR)/fit-$(call sanitize_profile_name).itb,$(1),$($(PROFILE)_UBI_OPTS))
+endef
+
+define Image/mkfs/targz
+
+ $(TAR) -czpf $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-rootfs.tar.gz --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
+endef
+
+define Image/Build/ubifs
+
+ ifneq ($($(PROFILE)_UBIFS_OPTS),)
+ $(call Image/Build/SysupgradeNAND,$(call sanitize_profile_name),ubifs,$(KDIR)/fit-$(call sanitize_profile_name).itb)
+ $(call Image/Build/UbinizeImage,$(call sanitize_profile_name),--uboot-env --kernel $(KDIR)/fit-$(call sanitize_profile_name).itb,ubifs,$($(PROFILE)_UBI_OPTS))
+ endif
+
+endef
+
+Image/BuildKernel/Template/POGOPLUG_PRO=$(call Image/BuildKernel/Template,pogoplug-pro)
+Image/InstallKernel/Template/POGOPLUG_PRO=$(call Image/InstallKernel/Template,pogoplug-pro)
+
+Image/BuildKernel/Template/POGOPLUG_V3=$(call Image/BuildKernel/Template,pogoplug-v3)
+Image/InstallKernel/Template/POGOPLUG_V3=$(call Image/InstallKernel/Template,pogoplug-v3)
+
+Image/BuildKernel/Template/STG212=$(call Image/BuildKernel/Template,stg212)
+Image/InstallKernel/Template/STG212=$(call Image/InstallKernel/Template,stg212)
+
+Image/BuildKernel/Template/KD20=$(call Image/BuildKernel/Template,kd20)
+Image/InstallKernel/Template/KD20=$(call Image/InstallKernel/Template,kd20)
+
+define Image/BuildKernel
+ $(call Image/BuildKernel/Template/$(PROFILE))
+endef
+
+define Image/InstallKernel
+ $(call Image/InstallKernel/Template/$(PROFILE))
+endef
+
+define Image/Build
+ $(if $(Image/Build/$(1)), \
+ $(call Image/Build/$(1),$(1)), \
+ $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-$(1).img \
+ )
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/oxnas/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch b/target/linux/oxnas/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch
new file mode 100644
index 0000000000..fb7547f96b
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch
@@ -0,0 +1,62 @@
+Index: linux-3.18-rc4/arch/arm/include/asm/glue-cache.h
+===================================================================
+--- linux-3.18-rc4.orig/arch/arm/include/asm/glue-cache.h
++++ linux-3.18-rc4/arch/arm/include/asm/glue-cache.h
+@@ -156,11 +156,19 @@ static inline void nop_dma_unmap_area(co
+ #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
+ #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)
+ #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
+ #define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
+
+ #define dmac_map_area __glue(_CACHE,_dma_map_area)
+ #define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
+ #define dmac_flush_range __glue(_CACHE,_dma_flush_range)
++#else
++#define __cpuc_flush_dcache_area __glue(fiq,_flush_kern_dcache_area)
++
++#define dmac_map_area __glue(fiq,_dma_map_area)
++#define dmac_unmap_area __glue(fiq,_dma_unmap_area)
++#define dmac_flush_range __glue(fiq,_dma_flush_range)
++#endif /* CONFIG_DMA_CACHE_FIQ_BROADCAST */
+ #endif
+
+ #endif
+Index: linux-3.18-rc4/arch/arm/mm/Kconfig
+===================================================================
+--- linux-3.18-rc4.orig/arch/arm/mm/Kconfig
++++ linux-3.18-rc4/arch/arm/mm/Kconfig
+@@ -843,6 +843,17 @@ config DMA_CACHE_RWFO
+ in hardware, other workarounds are needed (e.g. cache
+ maintenance broadcasting in software via FIQ).
+
++config DMA_CACHE_FIQ_BROADCAST
++ bool "Enable fiq broadcast DMA cache maintenance"
++ depends on CPU_V6K && SMP
++ select FIQ
++ help
++ The Snoop Control Unit on ARM11MPCore does not detect the
++ cache maintenance operations and the dma_{map,unmap}_area()
++ functions may leave stale cache entries on other CPUs. By
++ enabling this option, fiq broadcast in the ARMv6
++ DMA cache maintenance functions is performed.
++
+ config OUTER_CACHE
+ bool
+
+Index: linux-3.18-rc4/arch/arm/mm/flush.c
+===================================================================
+--- linux-3.18-rc4.orig/arch/arm/mm/flush.c
++++ linux-3.18-rc4/arch/arm/mm/flush.c
+@@ -314,7 +314,11 @@ void flush_dcache_page(struct page *page
+
+ mapping = page_mapping(page);
+
++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
+ if (!cache_ops_need_broadcast() &&
++#else
++ if (
++#endif
+ mapping && !page_mapped(page))
+ clear_bit(PG_dcache_clean, &page->flags);
+ else {
diff --git a/target/linux/oxnas/patches-3.18/250-add-plxtech-vendor-prefix.patch b/target/linux/oxnas/patches-3.18/250-add-plxtech-vendor-prefix.patch
new file mode 100644
index 0000000000..c495258d30
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/250-add-plxtech-vendor-prefix.patch
@@ -0,0 +1,12 @@
+Index: linux-3.18-rc4/Documentation/devicetree/bindings/vendor-prefixes.txt
+===================================================================
+--- linux-3.18-rc4.orig/Documentation/devicetree/bindings/vendor-prefixes.txt
++++ linux-3.18-rc4/Documentation/devicetree/bindings/vendor-prefixes.txt
+@@ -113,6 +113,7 @@ panasonic Panasonic Corporation
+ phytec PHYTEC Messtechnik GmbH
+ picochip Picochip Ltd
+ plathome Plat'Home Co., Ltd.
++plxtech PLX Technology, Inc.
+ pixcir PIXCIR MICROELECTRONICS Co., Ltd
+ powervr PowerVR (deprecated, use img)
+ qca Qualcomm Atheros, Inc.
diff --git a/target/linux/oxnas/patches-3.18/300-introduce-oxnas-platform.patch b/target/linux/oxnas/patches-3.18/300-introduce-oxnas-platform.patch
new file mode 100644
index 0000000000..17ec83b63f
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/300-introduce-oxnas-platform.patch
@@ -0,0 +1,79 @@
+Index: linux-3.18-rc4/arch/arm/Kconfig
+===================================================================
+--- linux-3.18-rc4.orig/arch/arm/Kconfig
++++ linux-3.18-rc4/arch/arm/Kconfig
+@@ -369,6 +369,17 @@ config ARCH_VERSATILE
+ help
+ This enables support for ARM Ltd Versatile board.
+
++config ARCH_OXNAS
++ bool "Oxford Semiconductor 815/820/825 NAS SoC"
++ select ARCH_REQUIRE_GPIOLIB
++ select CLKDEV_LOOKUP
++ select GENERIC_CLOCKEVENTS
++ select COMMON_CLK
++ select MIGHT_HAVE_PCI
++ select ARCH_HAS_RESET_CONTROLLER
++ help
++ This enables support for Oxsemi 815/820/825 NAS SoC
++
+ config ARCH_AT91
+ bool "Atmel AT91"
+ select ARCH_REQUIRE_GPIOLIB
+@@ -922,6 +933,8 @@ source "arch/arm/mach-omap2/Kconfig"
+
+ source "arch/arm/mach-orion5x/Kconfig"
+
++source "arch/arm/mach-oxnas/Kconfig"
++
+ source "arch/arm/mach-picoxcell/Kconfig"
+
+ source "arch/arm/mach-pxa/Kconfig"
+Index: linux-3.18-rc4/arch/arm/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/arch/arm/Makefile
++++ linux-3.18-rc4/arch/arm/Makefile
+@@ -187,6 +187,7 @@ machine-$(CONFIG_ARCH_NSPIRE) += nspire
+ machine-$(CONFIG_ARCH_OMAP1) += omap1
+ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
+ machine-$(CONFIG_ARCH_ORION5X) += orion5x
++machine-$(CONFIG_ARCH_OXNAS) += oxnas
+ machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
+ machine-$(CONFIG_ARCH_PXA) += pxa
+ machine-$(CONFIG_ARCH_QCOM) += qcom
+Index: linux-3.18-rc4/arch/arm/boot/dts/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/arch/arm/boot/dts/Makefile
++++ linux-3.18-rc4/arch/arm/boot/dts/Makefile
+@@ -352,6 +352,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-la
+ orion5x-lacie-ethernet-disk-mini-v2.dtb \
+ orion5x-maxtor-shared-storage-2.dtb \
+ orion5x-rd88f5182-nas.dtb
++dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb
+ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+ dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-apq8064-cm-qs600.dtb \
+Index: linux-3.18-rc4/arch/arm/tools/mach-types
+===================================================================
+--- linux-3.18-rc4.orig/arch/arm/tools/mach-types
++++ linux-3.18-rc4/arch/arm/tools/mach-types
+@@ -228,6 +228,7 @@ edb9302a MACH_EDB9302A EDB9302A 1127
+ edb9307a MACH_EDB9307A EDB9307A 1128
+ omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138
+ vstms MACH_VSTMS VSTMS 1140
++ox820 MACH_OX820 OX820 1152
+ micro9m MACH_MICRO9M MICRO9M 1169
+ bug MACH_BUG BUG 1179
+ at91sam9263ek MACH_AT91SAM9263EK AT91SAM9263EK 1202
+Index: linux-3.18-rc4/drivers/clk/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/drivers/clk/Makefile
++++ linux-3.18-rc4/drivers/clk/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_COMMON_CLK_MAX77802) += clk
+ obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o
+ obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
+ obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
++obj-$(CONFIG_ARCH_OXNAS) += clk-oxnas.o
+ obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
+ obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o
+ obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
diff --git a/target/linux/oxnas/patches-3.18/310-oxnas-clocksource.patch b/target/linux/oxnas/patches-3.18/310-oxnas-clocksource.patch
new file mode 100644
index 0000000000..0959e53648
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/310-oxnas-clocksource.patch
@@ -0,0 +1,29 @@
+Index: linux-3.18-rc4/drivers/clocksource/Kconfig
+===================================================================
+--- linux-3.18-rc4.orig/drivers/clocksource/Kconfig
++++ linux-3.18-rc4/drivers/clocksource/Kconfig
+@@ -156,6 +156,12 @@ config VF_PIT_TIMER
+ help
+ Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+
++config CLKSRC_RPS_TIMER
++ def_bool y if ARCH_OXNAS
++ select CLKSRC_MMIO
++ help
++ This option enables support for the oxnas rps timers.
++
+ config SYS_SUPPORTS_SH_CMT
+ bool
+
+Index: linux-3.18-rc4/drivers/clocksource/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/drivers/clocksource/Makefile
++++ linux-3.18-rc4/drivers/clocksource/Makefile
+@@ -36,6 +36,7 @@ obj-$(CONFIG_CLKSRC_EFM32) += time-efm32
+ obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
+ obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
+ obj-$(CONFIG_FSL_FTM_TIMER) += fsl_ftm_timer.o
++obj-$(CONFIG_CLKSRC_RPS_TIMER) += oxnas_rps_timer.o
+ obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
+ obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
+ obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
diff --git a/target/linux/oxnas/patches-3.18/320-oxnas-irqchip.patch b/target/linux/oxnas/patches-3.18/320-oxnas-irqchip.patch
new file mode 100644
index 0000000000..e6262da78d
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/320-oxnas-irqchip.patch
@@ -0,0 +1,40 @@
+Index: linux-3.18-rc4/drivers/irqchip/Kconfig
+===================================================================
+--- linux-3.18-rc4.orig/drivers/irqchip/Kconfig
++++ linux-3.18-rc4/drivers/irqchip/Kconfig
+@@ -15,6 +15,11 @@ config ARM_GIC_V3
+ select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
+
++config PLXTECH_RPS
++ def_bool y if ARHC_OXNAS
++ depends on ARCH_OXNAS
++ select IRQ_DOMAIN
++
+ config ARM_NVIC
+ bool
+ select IRQ_DOMAIN
+Index: linux-3.18-rc4/drivers/irqchip/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/drivers/irqchip/Makefile
++++ linux-3.18-rc4/drivers/irqchip/Makefile
+@@ -28,6 +28,7 @@ obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc.
+ obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o
+ obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
+ obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
++obj-$(CONFIG_PLXTECH_RPS) += irq-rps.o
+ obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
+ obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o
+ obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
+Index: linux-3.18-rc4/drivers/irqchip/irq-gic.c
+===================================================================
+--- linux-3.18-rc4.orig/drivers/irqchip/irq-gic.c
++++ linux-3.18-rc4/drivers/irqchip/irq-gic.c
+@@ -1044,6 +1044,7 @@ IRQCHIP_DECLARE(gic_400, "arm,gic-400",
+ IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
+ IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
+ IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);
++IRQCHIP_DECLARE(arm11_mpcore_gic, "arm,arm11mp-gic", gic_of_init);
+ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
+ IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
+
diff --git a/target/linux/oxnas/patches-3.18/330-oxnas-pinctrl.patch b/target/linux/oxnas/patches-3.18/330-oxnas-pinctrl.patch
new file mode 100644
index 0000000000..3ecc6ebe77
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/330-oxnas-pinctrl.patch
@@ -0,0 +1,32 @@
+Index: linux-3.18-rc4/drivers/pinctrl/Kconfig
+===================================================================
+--- linux-3.18-rc4.orig/drivers/pinctrl/Kconfig
++++ linux-3.18-rc4/drivers/pinctrl/Kconfig
+@@ -67,6 +67,15 @@ config PINCTRL_AT91
+ help
+ Say Y here to enable the at91 pinctrl driver
+
++config PINCTRL_OXNAS
++ bool "OXNAS pinctrl driver"
++ depends on OF
++ depends on ARCH_OXNAS
++ select PINMUX
++ select PINCONF
++ help
++ Say Y here to enable the oxnas pinctrl driver
++
+ config PINCTRL_BAYTRAIL
+ bool "Intel Baytrail GPIO pin control"
+ depends on GPIOLIB && ACPI && X86
+Index: linux-3.18-rc4/drivers/pinctrl/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/drivers/pinctrl/Makefile
++++ linux-3.18-rc4/drivers/pinctrl/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl
+ obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o
+ obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
+ obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
++obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o
+ obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
+ obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
+ obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
diff --git a/target/linux/oxnas/patches-3.18/340-oxnas-pcie.patch b/target/linux/oxnas/patches-3.18/340-oxnas-pcie.patch
new file mode 100644
index 0000000000..6549db01a9
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/340-oxnas-pcie.patch
@@ -0,0 +1,26 @@
+Index: linux-3.18-rc4/drivers/pci/host/Kconfig
+===================================================================
+--- linux-3.18-rc4.orig/drivers/pci/host/Kconfig
++++ linux-3.18-rc4/drivers/pci/host/Kconfig
+@@ -91,4 +91,9 @@ config PCI_XGENE
+ There are 5 internal PCIe ports available. Each port is GEN3 capable
+ and have varied lanes from x1 to x8.
+
++config PCI_OXNAS
++ bool "PLX Oxnas PCIe controller"
++ depends on ARCH_OXNAS
++ select PCIEPORTBUS
++
+ endmenu
+Index: linux-3.18-rc4/drivers/pci/host/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/drivers/pci/host/Makefile
++++ linux-3.18-rc4/drivers/pci/host/Makefile
+@@ -3,6 +3,7 @@ obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
+ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
+ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
+ obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
++obj-$(CONFIG_PCI_OXNAS) += pcie-oxnas.o
+ obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
+ obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
+ obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o
diff --git a/target/linux/oxnas/patches-3.18/350-oxnas-reset.patch b/target/linux/oxnas/patches-3.18/350-oxnas-reset.patch
new file mode 100644
index 0000000000..5540920414
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/350-oxnas-reset.patch
@@ -0,0 +1,24 @@
+Index: linux-3.18-rc4/drivers/reset/Kconfig
+===================================================================
+--- linux-3.18-rc4.orig/drivers/reset/Kconfig
++++ linux-3.18-rc4/drivers/reset/Kconfig
+@@ -12,4 +12,9 @@ menuconfig RESET_CONTROLLER
+
+ If unsure, say no.
+
++config RESET_CONTROLLER_OXNAS
++ bool
++ select RESET_CONTROLLER
++
+ source "drivers/reset/sti/Kconfig"
++
+Index: linux-3.18-rc4/drivers/reset/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/drivers/reset/Makefile
++++ linux-3.18-rc4/drivers/reset/Makefile
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_RESET_CONTROLLER) += core.o
++obj-$(CONFIG_RESET_CONTROLLER_OXNAS) += reset-ox820.o
+ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
+ obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
+ obj-$(CONFIG_ARCH_STI) += sti/
diff --git a/target/linux/oxnas/patches-3.18/400-oxnas-nand.patch b/target/linux/oxnas/patches-3.18/400-oxnas-nand.patch
new file mode 100644
index 0000000000..90827e5b8a
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/400-oxnas-nand.patch
@@ -0,0 +1,28 @@
+Index: linux-3.18-rc4/drivers/mtd/nand/Kconfig
+===================================================================
+--- linux-3.18-rc4.orig/drivers/mtd/nand/Kconfig
++++ linux-3.18-rc4/drivers/mtd/nand/Kconfig
+@@ -516,4 +516,12 @@ config MTD_NAND_XWAY
+ Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
+ to the External Bus Unit (EBU).
+
++config MTD_NAND_OXNAS
++ tristate "Support for NAND on Plxtech NAS782X SoC"
++ depends on ARCH_OXNAS
++ select MTD_NAND_PLATFORM
++ help
++ Enables support for NAND Flash chips on Plxtech NAS782X SoCs. NAND is attached
++ to the STATIC Unit.
++
+ endif # MTD_NAND
+Index: linux-3.18-rc4/drivers/mtd/nand/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/drivers/mtd/nand/Makefile
++++ linux-3.18-rc4/drivers/mtd/nand/Makefile
+@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740
+ obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
+ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
+ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
++obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o
+
+ nand-objs := nand_base.o nand_bbt.o nand_timings.o
diff --git a/target/linux/oxnas/patches-3.18/500-oxnas-sata.patch b/target/linux/oxnas/patches-3.18/500-oxnas-sata.patch
new file mode 100644
index 0000000000..94b792b136
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/500-oxnas-sata.patch
@@ -0,0 +1,30 @@
+Index: linux-3.18-rc4/drivers/ata/Kconfig
+===================================================================
+--- linux-3.18-rc4.orig/drivers/ata/Kconfig
++++ linux-3.18-rc4/drivers/ata/Kconfig
+@@ -385,6 +385,13 @@ config SATA_VITESSE
+
+ If unsure, say N.
+
++config SATA_OXNAS
++ tristate "PLXTECH NAS782X SATA support"
++ help
++ This option enables support for Nas782x Serial ATA controller.
++
++ If unsure, say N.
++
+ comment "PATA SFF controllers with BMDMA"
+
+ config PATA_ALI
+Index: linux-3.18-rc4/drivers/ata/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/drivers/ata/Makefile
++++ linux-3.18-rc4/drivers/ata/Makefile
+@@ -37,6 +37,7 @@ obj-$(CONFIG_SATA_SVW) += sata_svw.o
+ obj-$(CONFIG_SATA_ULI) += sata_uli.o
+ obj-$(CONFIG_SATA_VIA) += sata_via.o
+ obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o
++obj-$(CONFIG_SATA_OXNAS) += sata_oxnas.o
+
+ # SFF PATA w/ BMDMA
+ obj-$(CONFIG_PATA_ALI) += pata_ali.o
diff --git a/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch b/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch
new file mode 100644
index 0000000000..f2221dda88
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch
@@ -0,0 +1,30 @@
+Index: linux-3.18-rc4/drivers/usb/host/Kconfig
+===================================================================
+--- linux-3.18-rc4.orig/drivers/usb/host/Kconfig
++++ linux-3.18-rc4/drivers/usb/host/Kconfig
+@@ -302,6 +302,13 @@ config USB_OCTEON_EHCI
+ USB 2.0 device support. All CN6XXX based chips with USB are
+ supported.
+
++config USB_EHCI_OXNAS
++ tristate "OXNAS EHCI Module"
++ depends on USB_EHCI_HCD && ARCH_OXNAS
++ select USB_EHCI_ROOT_HUB_TT
++ ---help---
++ Enable support for the OX820 SOC's on-chip EHCI controller.
++
+ endif # USB_EHCI_HCD
+
+ config USB_OXU210HP_HCD
+Index: linux-3.18-rc4/drivers/usb/host/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/drivers/usb/host/Makefile
++++ linux-3.18-rc4/drivers/usb/host/Makefile
+@@ -44,6 +44,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-
+ obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
+ obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
+ obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o
++obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o
+
+ obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
+ obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/target/linux/oxnas/patches-3.18/900-more-boards.patch b/target/linux/oxnas/patches-3.18/900-more-boards.patch
new file mode 100644
index 0000000000..b31967ad81
--- /dev/null
+++ b/target/linux/oxnas/patches-3.18/900-more-boards.patch
@@ -0,0 +1,16 @@
+Index: linux-3.18-rc4/arch/arm/boot/dts/Makefile
+===================================================================
+--- linux-3.18-rc4.orig/arch/arm/boot/dts/Makefile
++++ linux-3.18-rc4/arch/arm/boot/dts/Makefile
+@@ -352,7 +352,10 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-la
+ orion5x-lacie-ethernet-disk-mini-v2.dtb \
+ orion5x-maxtor-shared-storage-2.dtb \
+ orion5x-rd88f5182-nas.dtb
+-dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb
++dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb \
++ ox820-pogoplug-v3.dtb \
++ ox820-stg212.dtb \
++ ox820-kd20.dtb
+ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+ dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-apq8064-cm-qs600.dtb \
diff --git a/target/linux/oxnas/profiles/100-Generic.mk b/target/linux/oxnas/profiles/100-Generic.mk
new file mode 100644
index 0000000000..734b12376a
--- /dev/null
+++ b/target/linux/oxnas/profiles/100-Generic.mk
@@ -0,0 +1,53 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/POGOPLUG_PRO
+ NAME:=PogoPlug Pro
+ PACKAGES:= \
+ uboot-envtools kmod-usb2-oxnas
+endef
+
+define Profile/POGOPLUG_PRO/Description
+ Profile with built-in ox820 PogoPlug Pro device-tree
+ (board with miniPCIe slot)
+endef
+
+define Profile/POGOPLUG_V3
+ NAME:=PogoPlug V3
+ PACKAGES:= \
+ uboot-envtools kmod-usb2-oxnas
+endef
+
+define Profile/POGOPLUG_V3/Description
+ Profile with built-in ox820 PogoPlug V3 device-tree
+ (board without miniPCIe slot)
+endef
+
+define Profile/STG212
+ NAME:=MitraStar STG-212
+ PACKAGES:= \
+ uboot-envtools kmod-usb2-oxnas
+endef
+
+define Profile/STG212/Description
+ Profile with built-in ox820 STG-212 device-tree
+endef
+
+define Profile/KD20
+ NAME:=Shuttle KD20
+ PACKAGES:= \
+ uboot-envtools kmod-usb2-oxnas kmod-usb3 kmod-rtc-pcf8563
+endef
+
+define Profile/KD20/Description
+ Profile with built-in ox820 KD20 device-tree
+endef
+
+$(eval $(call Profile,POGOPLUG_PRO))
+$(eval $(call Profile,POGOPLUG_V3))
+$(eval $(call Profile,STG212))
+$(eval $(call Profile,KD20))