imx6: update Ventana dts

Update the Ventana device-tree to match upstream:
 - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
 - align pinctrl with upstream
 - consolidate multiple patches into one

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39644 3c298f89-4303-0410-b956-a3cf2f4a3e73

20 files changed, 1827 insertions, 1702 deletions

diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts
index 3368d45255..07f0acd6a1 100644
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts
@@ -11,202 +11,11 @@
 
 /dts-v1/;
 #include "imx6dl.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
 
 / {
 	model = "Gateworks Ventana i.MX6 DualLite GW51XX";
 	compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
-
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		can0 = &can1;
-		ethernet0 = &fec;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		led0 = &led0;
-		led1 = &led1;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-			default-state = "off";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_5p0v: 5p0v {
-			compatible = "regulator-fixed";
-			regulator-name = "5P0V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: usb_otg_vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 30 0>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	hwmon: gsc@29 {
-		compatible = "gw,gsp";
-		reg = <0x29>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_2>;
-	status = "okay";
-
-	pmic: ltc3676@3c {
-		compatible = "ltc,ltc3676";
-		reg = <0x3c>;
-
-		regulators {
-			sw1_reg: ltc3676__sw1 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: ltc3676__sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: ltc3676__sw3 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: ltc3676__sw4 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ltc3676__ldo2 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ltc3676__ldo4 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_2>;
-	status = "okay";
-
-	videoin: adv7180@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
-	};
 };
 
 &iomuxc {
@@ -227,44 +36,3 @@
 		};
 	};
 };
-
-&pcie {
-	reset-gpio = <&gpio1 0 0>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_2>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_1>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5_1>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts
index eef42ed38e..cafbc069d7 100644
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts
@@ -11,287 +11,11 @@
 
 /dts-v1/;
 #include "imx6dl.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
 
 / {
 	model = "Gateworks Ventana i.MX6 DualLite GW52XX";
 	compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
-
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		can0 = &can1;
-		ethernet0 = &fec;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-		usdhc2 = &usdhc3;
-	};
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_1p0v: 1p0v {
-			compatible = "regulator-fixed";
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
-
-		/* remove this fixed regulator once ltc3676__sw2 driver available */
-		reg_1p8v: 1p8v {
-			compatible = "regulator-fixed";
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_5p0v: 5p0v {
-			compatible = "regulator-fixed";
-			regulator-name = "5P0V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: usb_otg_vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1_1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 30 0>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	hwmon: gsc@29 {
-		compatible = "gw,gsp";
-		reg = <0x29>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_2>;
-	status = "okay";
-
-	pciswitch: pex8609@3f {
-		compatible = "plx,pex8609";
-		reg = <0x3f>;
-	};
-
-	pmic: ltc3676@3c {
-		compatible = "ltc,ltc3676";
-		reg = <0x3c>;
-
-		regulators {
-			sw1_reg: ltc3676__sw1 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: ltc3676__sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: ltc3676__sw3 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: ltc3676__sw4 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ltc3676__ldo2 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ltc3676__ldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ltc3676__ldo4 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_2>;
-	status = "okay";
-
-	accelerometer: fxos8700@1e {
-		compatible = "fsl,fxos8700";
-		reg = <0x13>;
-	};
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 169>;
-		VDDA-supply = <&reg_1p8v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	touchscreen: egalax_ts@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>; /* gpio7_12 active low */
-		wakeup-gpios = <&gpio7 12 0>;
-	};
-
-	videoin: adv7180@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
-	};
 };
 
 &iomuxc {
@@ -322,58 +46,3 @@
 		};
 	};
 };
-
-&ldb {
-	status = "okay";
-	lvds-channel@0 {
-		crtcs = <&ipu1 0>, <&ipu1 1>;
-	};
-};
-
-&pcie {
-	reset-gpio = <&gpio1 29 0>;
-	status = "okay";
-};
-
-&ssi1 {
-	fsl,mode = "i2s-slave";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_2>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5_1>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
-	cd-gpios = <&gpio7 0 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts
index 99d3d4c459..fe2b0291e1 100644
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts
@@ -11,303 +11,11 @@
 
 /dts-v1/;
 #include "imx6dl.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
 
 / {
 	model = "Gateworks Ventana i.MX6 DualLite GW53XX";
 	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
-
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		can0 = &can1;
-		ethernet0 = &fec;
-		ethernet1 = &eth1;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		sky2 = &eth1;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-		usdhc2 = &usdhc3;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_1p0v: 1p0v {
-			compatible = "regulator-fixed";
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
-
-		/* remove this fixed regulator once ltc3676__sw2 driver available */
-		reg_1p8v: 1p8v {
-			compatible = "regulator-fixed";
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_h1_vbus: usb_h1_vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: usb_otg_vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1_1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 30 0>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	hwmon: gsc@29 {
-		compatible = "gw,gsp";
-		reg = <0x29>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_2>;
-	status = "okay";
-
-	pciswitch: pex8609@3f {
-		compatible = "plx,pex8609";
-		reg = <0x3f>;
-	};
-
-	pmic: ltc3676@3c {
-		compatible = "ltc,ltc3676";
-		reg = <0x3c>;
-
-		regulators {
-			sw1_reg: ltc3676__sw1 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: ltc3676__sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: ltc3676__sw3 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: ltc3676__sw4 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ltc3676__ldo2 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ltc3676__ldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ltc3676__ldo4 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_2>;
-	status = "okay";
-
-	accelerometer: fxos8700@1e {
-		compatible = "fsl,fxos8700";
-		reg = <0x1e>;
-	};
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 169>;
-		VDDA-supply = <&reg_1p8v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	hdmiin: adv7611@4c {
-		compatible = "adi,adv7611";
-		reg = <0x4c>;
-	};
-
-	touchscreen: egalax_ts@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>; /* gpio7_12 active low */
-		wakeup-gpios = <&gpio7 12 0>;
-	};
-
-	videoout: adv7393@2a {
-		compatible = "adi,adv7393";
-		reg = <0x2a>;
-	};
-
-	videoin: adv7180@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
-	};
 };
 
 &iomuxc {
@@ -337,65 +45,3 @@
 		};
 	};
 };
-
-&ldb {
-	status = "okay";
-	lvds-channel@0 {
-		crtcs = <&ipu1 0>, <&ipu1 1>;
-	};
-};
-
-&pcie {
-	reset-gpio = <&gpio1 29 0>;
-	status = "okay";
-
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-		/* Filled in by U-Boot */
-		mac-address = [ 00 00 00 00 00 00 ];
-	};
-};
-
-&ssi1 {
-	fsl,mode = "i2s-slave";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_2>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5_1>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
-	cd-gpios = <&gpio7 0 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw54xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw54xx.dts
new file mode 100644
index 0000000000..6a0ad02890
--- /dev/null
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw54xx.dts
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite GW54XX";
+	compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6DL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
+				MX6DL_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
+				MX6DL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+				MX6DL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
+				MX6DL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
+				MX6DL_PAD_GPIO_2__GPIO1_IO02     0x80000000 /* CAN_STBY */
+				MX6DL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
+				MX6DL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
+				MX6DL_PAD_KEY_ROW0__GPIO4_IO07   0x80000000 /* user2 led */
+				MX6DL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
+				MX6DL_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
+				MX6DL_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
+			 >;
+		};
+	};
+};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw51xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw51xx.dts
new file mode 100644
index 0000000000..4c2f8c4022
--- /dev/null
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw51xx.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Quad GW51XX";
+	compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6Q_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
+				MX6Q_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
+				MX6Q_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
+				MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+				MX6Q_PAD_GPIO_0__GPIO1_IO00    0x80000000 /* PCIE_RST# */
+				MX6Q_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
+				MX6Q_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
+			 >;
+		};
+	};
+};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw52xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw52xx.dts
new file mode 100644
index 0000000000..18bf17dd8c
--- /dev/null
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw52xx.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Quad GW52XX";
+	compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6Q_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
+				MX6Q_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
+				MX6Q_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
+				MX6Q_PAD_EIM_D31__GPIO3_IO31   0x80000000 /* VIDDEC_PDN# */
+				MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+				MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
+				MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
+				MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+				MX6Q_PAD_GPIO_0__CCM_CLKO1     0x000130b0 /* AUD4_MCK */
+				MX6Q_PAD_GPIO_2__GPIO1_IO02    0x80000000 /* USB_SEL_PCI */
+				MX6Q_PAD_GPIO_17__GPIO7_IO12   0x80000000 /* TOUCH_IRQ# */
+				MX6Q_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
+				MX6Q_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
+				MX6Q_PAD_KEY_ROW4__GPIO4_IO15  0x80000000 /* user3 led */
+				MX6Q_PAD_SD2_CMD__GPIO1_IO11   0x80000000 /* LVDS_TCH# */
+				MX6Q_PAD_SD3_DAT5__GPIO7_IO00  0x80000000 /* SD3_CD# */
+				MX6Q_PAD_SD4_DAT3__GPIO2_IO11  0x80000000 /* UART2_EN# */
+			 >;
+		};
+	};
+};
+
+&sata {
+        status = "okay";
+};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw53xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw53xx.dts
new file mode 100644
index 0000000000..4453cb5673
--- /dev/null
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw53xx.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Quad GW53XX";
+	compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6Q_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
+				MX6Q_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
+				MX6Q_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
+				MX6Q_PAD_EIM_D31__GPIO3_IO31   0x80000000 /* VIDDEC_PDN# */
+				MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+				MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
+				MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
+				MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+				MX6Q_PAD_GPIO_0__CCM_CLKO1     0x000130b0 /* AUD4_MCK */
+				MX6Q_PAD_GPIO_17__GPIO7_IO12   0x80000000 /* TOUCH_IRQ# */
+				MX6Q_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
+				MX6Q_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
+				MX6Q_PAD_KEY_ROW4__GPIO4_IO15  0x80000000 /* user3 led */
+				MX6Q_PAD_SD2_CMD__GPIO1_IO11   0x80000000 /* LVDS_TCH# */
+				MX6Q_PAD_SD3_DAT5__GPIO7_IO00  0x80000000 /* SD3_CD# */
+				MX6Q_PAD_SD4_DAT3__GPIO2_IO11  0x80000000 /* UART2_EN# */
+			 >;
+		};
+	};
+};
+
+&sata {
+        status = "okay";
+};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 825d952ba2..9677135840 100644
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -38,10 +38,6 @@
 		bootargs = "console=ttymxc1,115200";
 	};
 
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -65,6 +61,10 @@
 		};
 	};
 
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 
@@ -406,13 +406,7 @@
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_1>;
+	pinctrl-0 = <&pinctrl_uart2_3>;
 	status = "okay";
 };
 
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts
index 828fc81183..c85133930b 100644
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts
@@ -11,344 +11,11 @@
 
 /dts-v1/;
 #include "imx6q.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
 
 / {
 	model = "Gateworks Ventana i.MX6 Quad GW54XX";
 	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
-
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		can0 = &can1;
-		ethernet0 = &fec;
-		ethernet1 = &eth1;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		sky2 = &eth1;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-		usdhc2 = &usdhc3;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_1p0v: 1p0v {
-			compatible = "regulator-fixed";
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_h1_vbus: usb_h1_vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: usb_otg_vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1_1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 30 0>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	hwmon: gsc@29 {
-		compatible = "gw,gsp";
-		reg = <0x29>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_2>;
-	status = "okay";
-
-	pmic: pfuze100@08 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	pciswitch: pex8609@3f {
-		compatible = "plx,pex8609";
-		reg = <0x3f>;
-	};
-
-	pciclkgen: si52147@6b {
-		compatible = "sil,si52147";
-		reg = <0x6b>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_2>;
-	status = "okay";
-
-	accelerometer: fxos8700@1e {
-		compatible = "fsl,fxos8700";
-		reg = <0x1e>;
-	};
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 169>;
-		VDDA-supply = <&sw4_reg>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	hdmiin: adv7611@4c {
-		compatible = "adi,adv7611";
-		reg = <0x4c>;
-	};
-
-	touchscreen: egalax_ts@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>; /* gpio7_12 active low */
-		wakeup-gpios = <&gpio7 12 0>;
-	};
-
-	videoout: adv7393@2a {
-		compatible = "adi,adv7393";
-		reg = <0x2a>;
-	};
-
-	videoin: adv7180@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
-	};
 };
 
 &iomuxc {
@@ -375,74 +42,13 @@
 	};
 };
 
-&ldb {
+&ldb {  
 	status = "okay";
 	lvds-channel@0 {
 		crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
 	};
 };
 
-&pcie {
-	reset-gpio = <&gpio1 29 0>;
-	status = "okay";
-
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-		/* Filled in by U-Boot */
-		mac-address = [ 00 00 00 00 00 00 ];
-	};
-};
-
 &sata {
 	status = "okay";
 };
-
-&ssi1 {
-	fsl,mode = "i2s-slave";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_2>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_1>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5_1>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
-	cd-gpios = <&gpio7 0 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
new file mode 100644
index 0000000000..146a337b89
--- /dev/null
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -0,0 +1,245 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		can0 = &can1;
+		ethernet0 = &fec;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_5p0v: 5p0v {
+			compatible = "regulator-fixed";
+			regulator-name = "5P0V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: usb_otg_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand_2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_2>;
+	status = "okay";
+
+	pmic: ltc3676@3c {
+		compatible = "ltc,ltc3676";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: ltc3676__sw1 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: ltc3676__sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: ltc3676__sw3 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: ltc3676__sw4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ltc3676__ldo2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ltc3676__ldo4 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_2>;
+	status = "okay";
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 0 0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_2>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_3>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
new file mode 100644
index 0000000000..5524782ad7
--- /dev/null
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -0,0 +1,344 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		can0 = &can1;
+		ethernet0 = &fec;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+		usdhc2 = &usdhc3;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_1p0v: 1p0v {
+			compatible = "regulator-fixed";
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		/* remove this fixed regulator once ltc3676__sw2 driver available */
+		reg_1p8v: 1p8v {
+			compatible = "regulator-fixed";
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_5p0v: 5p0v {
+			compatible = "regulator-fixed";
+			regulator-name = "5P0V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: usb_otg_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1_1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand_2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_2>;
+	status = "okay";
+
+	pciswitch: pex8609@3f {
+		compatible = "plx,pex8609";
+		reg = <0x3f>;
+	};
+
+	pmic: ltc3676@3c {
+		compatible = "ltc,ltc3676";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: ltc3676__sw1 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: ltc3676__sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: ltc3676__sw3 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: ltc3676__sw4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ltc3676__ldo2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ltc3676__ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ltc3676__ldo4 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_2>;
+	status = "okay";
+
+	accelerometer: fxos8700@1e {
+		compatible = "fsl,fxos8700";
+		reg = <0x13>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 169>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>; /* gpio7_12 active low */
+		wakeup-gpios = <&gpio7 12 0>;
+	};
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&ldb {
+	status = "okay";
+	lvds-channel@0 {
+		crtcs = <&ipu1 0>, <&ipu1 1>;
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 0>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_2>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
new file mode 100644
index 0000000000..40e6b4e56a
--- /dev/null
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -0,0 +1,367 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		can0 = &can1;
+		ethernet0 = &fec;
+		ethernet1 = &eth1;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		sky2 = &eth1;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+		usdhc2 = &usdhc3;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_1p0v: 1p0v {
+			compatible = "regulator-fixed";
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		/* remove this fixed regulator once ltc3676__sw2 driver available */
+		reg_1p8v: 1p8v {
+			compatible = "regulator-fixed";
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: usb_h1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: usb_otg_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1_1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand_2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_2>;
+	status = "okay";
+
+	pciswitch: pex8609@3f {
+		compatible = "plx,pex8609";
+		reg = <0x3f>;
+	};
+
+	pmic: ltc3676@3c {
+		compatible = "ltc,ltc3676";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: ltc3676__sw1 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: ltc3676__sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: ltc3676__sw3 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: ltc3676__sw4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ltc3676__ldo2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ltc3676__ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ltc3676__ldo4 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_2>;
+	status = "okay";
+
+	accelerometer: fxos8700@1e {
+		compatible = "fsl,fxos8700";
+		reg = <0x1e>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 169>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	hdmiin: adv7611@4c {
+		compatible = "adi,adv7611";
+		reg = <0x4c>;
+	};
+
+	touchscreen: egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>; /* gpio7_12 active low */
+		wakeup-gpios = <&gpio7 12 0>;
+	};
+
+	videoout: adv7393@2a {
+		compatible = "adi,adv7393";
+		reg = <0x2a>;
+	};
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&ldb {
+	status = "okay";
+	lvds-channel@0 {
+		crtcs = <&ipu1 0>, <&ipu1 1>;
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 0>;
+	status = "okay";
+
+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
+		compatible = "marvell,sky2";
+		/* Filled in by U-Boot */
+		mac-address = [ 00 00 00 00 00 00 ];
+	};
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_2>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
new file mode 100644
index 0000000000..e27b27ae92
--- /dev/null
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -0,0 +1,408 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		can0 = &can1;
+		ethernet0 = &fec;
+		ethernet1 = &eth1;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		sky2 = &eth1;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+		usdhc2 = &usdhc3;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_1p0v: 1p0v {
+			compatible = "regulator-fixed";
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: usb_h1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: usb_otg_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1_1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand_2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_2>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pciswitch: pex8609@3f {
+		compatible = "plx,pex8609";
+		reg = <0x3f>;
+	};
+
+	pciclkgen: si52147@6b {
+		compatible = "sil,si52147";
+		reg = <0x6b>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_2>;
+	status = "okay";
+
+	accelerometer: fxos8700@1e {
+		compatible = "fsl,fxos8700";
+		reg = <0x1e>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 169>;
+		VDDA-supply = <&sw4_reg>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	hdmiin: adv7611@4c {
+		compatible = "adi,adv7611";
+		reg = <0x4c>;
+	};
+
+	touchscreen: egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>; /* gpio7_12 active low */
+		wakeup-gpios = <&gpio7 12 0>;
+	};
+
+	videoout: adv7393@2a {
+		compatible = "adi,adv7393";
+		reg = <0x2a>;
+	};
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&ldb {
+	status = "okay";
+	lvds-channel@0 {
+		crtcs = <&ipu1 0>, <&ipu1 1>;
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 0>;
+	status = "okay";
+
+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
+		compatible = "marvell,sky2";
+		/* Filled in by U-Boot */
+		mac-address = [ 00 00 00 00 00 00 ];
+	};
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_2>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch b/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch
new file mode 100644
index 0000000000..1385661b04
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch
@@ -0,0 +1,263 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -117,6 +117,15 @@ dtb-$(CONFIG_ARCH_MXC) += \
+ 	imx6dl-sabresd.dtb \
+ 	imx6dl-wandboard.dtb \
+ 	imx6q-arm2.dtb \
++	imx6q-gw51xx.dtb \
++	imx6q-gw52xx.dtb \
++	imx6q-gw53xx.dtb \
++	imx6q-gw54xx.dtb \
++	imx6q-gw5400-a.dtb \
++	imx6dl-gw51xx.dtb \
++	imx6dl-gw52xx.dtb \
++	imx6dl-gw53xx.dtb \
++	imx6dl-gw54xx.dtb \
+ 	imx6q-sabreauto.dtb \
+ 	imx6q-sabrelite.dtb \
+ 	imx6q-sabresd.dtb \
+--- a/arch/arm/boot/dts/imx6q.dtsi
++++ b/arch/arm/boot/dts/imx6q.dtsi
+@@ -212,6 +212,30 @@
+ 							MX6Q_PAD_SD4_DAT0__NAND_DQS      0x00b1
+ 						>;
+ 					};
++
++					/* No strobe */
++					pinctrl_gpmi_nand_2: gpmi-nand-2 {
++						fsl,pins = <
++							MX6Q_PAD_NANDF_CLE__NAND_CLE     0xb0b1
++							MX6Q_PAD_NANDF_ALE__NAND_ALE     0xb0b1
++							MX6Q_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
++							MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
++							MX6Q_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
++							MX6Q_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
++							MX6Q_PAD_NANDF_CS2__NAND_CE2_B   0xb0b1
++							MX6Q_PAD_NANDF_CS3__NAND_CE3_B   0xb0b1
++							MX6Q_PAD_SD4_CMD__NAND_RE_B      0xb0b1
++							MX6Q_PAD_SD4_CLK__NAND_WE_B      0xb0b1
++							MX6Q_PAD_NANDF_D0__NAND_DATA00   0xb0b1
++							MX6Q_PAD_NANDF_D1__NAND_DATA01   0xb0b1
++							MX6Q_PAD_NANDF_D2__NAND_DATA02   0xb0b1
++							MX6Q_PAD_NANDF_D3__NAND_DATA03   0xb0b1
++							MX6Q_PAD_NANDF_D4__NAND_DATA04   0xb0b1
++							MX6Q_PAD_NANDF_D5__NAND_DATA05   0xb0b1
++							MX6Q_PAD_NANDF_D6__NAND_DATA06   0xb0b1
++							MX6Q_PAD_NANDF_D7__NAND_DATA07   0xb0b1
++						>;
++					};
+ 				};
+ 
+ 				i2c1 {
+@@ -230,6 +254,12 @@
+ 							MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ 						>;
+ 					};
++					pinctrl_i2c2_2: i2c2grp-2 {
++						fsl,pins = <
++							MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
++							MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
++						>;
++					};
+ 				};
+ 
+ 				i2c3 {
+@@ -239,6 +269,12 @@
+ 							MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ 						>;
+ 					};
++					pinctrl_i2c3_2: i2c3grp-2 {
++						fsl,pins = <
++							MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
++							MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
++						>;
++					};
+ 				};
+ 
+ 				uart1 {
+@@ -248,6 +284,12 @@
+ 							MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ 						>;
+ 					};
++					pinctrl_uart1_2: uart1grp-2 {
++						fsl,pins = <
++							MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
++							MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
++						>;
++					};
+ 				};
+ 
+ 				uart2 {
+@@ -257,6 +299,21 @@
+ 							MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ 						>;
+ 					};
++					pinctrl_uart2_3: uart2grp-3 {
++						fsl,pins = <
++							MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
++							MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
++						>;
++					};
++				};
++
++				uart3 {
++					pinctrl_uart3_3: uart3grp-3 {
++						fsl,pins = <
++							MX6Q_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
++							MX6Q_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
++						>;
++					};
+ 				};
+ 
+ 				uart4 {
+@@ -267,6 +324,15 @@
+ 						>;
+ 					};
+ 				};
++
++				uart5 {
++					pinctrl_uart5_1: uart5grp-1 {
++						fsl,pins = <
++							MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
++							MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
++						>;
++					};
++				};
+ 
+ 				usbotg {
+ 					pinctrl_usbotg_1: usbotggrp-1 {
+--- a/arch/arm/boot/dts/imx6dl.dtsi
++++ b/arch/arm/boot/dts/imx6dl.dtsi
+@@ -37,6 +37,18 @@
+ 				compatible = "fsl,imx6dl-iomuxc";
+ 				reg = <0x020e0000 0x4000>;
+ 
++				/* shared pinctrl settings */
++				audmux {
++					pinctrl_audmux_1: audmux-1 {
++						fsl,pins = <
++							MX6DL_PAD_SD2_DAT0__AUD4_RXD  0x80000000
++							MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
++							MX6DL_PAD_SD2_DAT2__AUD4_TXD  0x80000000
++							MX6DL_PAD_SD2_DAT3__AUD4_TXC  0x80000000
++						>;
++					};
++				};
++
+ 				enet {
+ 					pinctrl_enet_1: enetgrp-1 {
+ 						fsl,pins = <
+@@ -105,6 +117,59 @@
+ 					};
+ 				};
+ 
++				gpmi-nand {
++					/* No strobe */
++					pinctrl_gpmi_nand_2: gpmi-nand-2 {
++						fsl,pins = <
++							MX6DL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
++							MX6DL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
++							MX6DL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
++							MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
++							MX6DL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
++							MX6DL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
++							MX6DL_PAD_NANDF_CS2__NAND_CE2_B   0xb0b1
++							MX6DL_PAD_NANDF_CS3__NAND_CE3_B   0xb0b1
++							MX6DL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
++							MX6DL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
++							MX6DL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
++							MX6DL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
++							MX6DL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
++							MX6DL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
++							MX6DL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
++							MX6DL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
++							MX6DL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
++							MX6DL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
++						>;
++					};
++				};
++
++				i2c1 {
++					pinctrl_i2c1_1: i2c1grp-1 {
++						fsl,pins = <
++							MX6DL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
++							MX6DL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
++						>;
++					};
++				};
++
++				i2c2 {
++					pinctrl_i2c2_2: i2c2grp-2 {
++						fsl,pins = <
++							MX6DL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
++							MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
++						>;
++					};
++				};
++
++				i2c3 {
++					pinctrl_i2c3_2: i2c3grp-2 {
++						fsl,pins = <
++							MX6DL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
++							MX6DL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
++						>;
++					};
++				};
++
+ 				uart1 {
+ 					pinctrl_uart1_1: uart1grp-1 {
+ 						fsl,pins = <
+@@ -112,6 +177,30 @@
+ 							MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ 						>;
+ 					};
++					pinctrl_uart1_2: uart1grp-2 {
++						fsl,pins = <
++							MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
++							MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
++						>;
++					};
++				};
++
++				uart2 {
++					pinctrl_uart2_3: uart2grp-3 {
++						fsl,pins = <
++							MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
++							MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
++						>;
++					};
++				};
++
++				uart3 {
++					pinctrl_uart3_3: uart3grp-3 {
++						fsl,pins = <
++							MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
++							MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
++						>;
++					};
+ 				};
+ 
+ 				uart4 {
+@@ -123,7 +212,22 @@
+ 					};
+ 				};
+ 
++				uart5 {
++					pinctrl_uart5_1: uart5grp-1 {
++						fsl,pins = <
++							MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
++							MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
++						>;
++					};
++				};
++
+ 				usbotg {
++					pinctrl_usbotg_1: usbotggrp-1 {
++						fsl,pins = <
++							MX6DL_PAD_GPIO_1__USB_OTG_ID 0x17059
++						>;
++					};
++
+ 					pinctrl_usbotg_2: usbotggrp-2 {
+ 						fsl,pins = <
+ 							MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
diff --git a/target/linux/imx6/patches-3.10/110-gw5400-a.patch b/target/linux/imx6/patches-3.10/110-gw5400-a.patch
deleted file mode 100644
index 5a3d610530..0000000000
--- a/target/linux/imx6/patches-3.10/110-gw5400-a.patch
+++ /dev/null
@@ -1,135 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- 	imx6dl-sabresd.dtb \
- 	imx6dl-wandboard.dtb \
- 	imx6q-arm2.dtb \
-+	imx6q-gw5400-a.dtb \
- 	imx6q-sabreauto.dtb \
- 	imx6q-sabrelite.dtb \
- 	imx6q-sabresd.dtb \
---- a/arch/arm/boot/dts/imx6q.dtsi
-+++ b/arch/arm/boot/dts/imx6q.dtsi
-@@ -98,6 +98,14 @@
- 							MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
- 						>;
- 					};
-+
-+					pinctrl_audmux_3: audmux-3 {
-+						fsl,pins = <
-+							MX6Q_PAD_DISP0_DAT19__AUD5_RXD  0x80000000
-+							MX6Q_PAD_EIM_D25__AUD5_RXC      0x80000000
-+							MX6Q_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000
-+						>;
-+					};
- 				};
- 
- 				ecspi1 {
-@@ -212,6 +220,30 @@
- 							MX6Q_PAD_SD4_DAT0__NAND_DQS      0x00b1
- 						>;
- 					};
-+
-+					/* No strobe */
-+					pinctrl_gpmi_nand_2: gpmi-nand-2 {
-+						fsl,pins = <
-+							MX6Q_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-+							MX6Q_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-+							MX6Q_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-+							MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+							MX6Q_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-+							MX6Q_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-+							MX6Q_PAD_NANDF_CS2__NAND_CE2_B   0xb0b1
-+							MX6Q_PAD_NANDF_CS3__NAND_CE3_B   0xb0b1
-+							MX6Q_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-+							MX6Q_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-+							MX6Q_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-+							MX6Q_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-+							MX6Q_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-+							MX6Q_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-+							MX6Q_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-+							MX6Q_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-+							MX6Q_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-+							MX6Q_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-+						>;
-+					};
- 				};
- 
- 				i2c1 {
-@@ -230,6 +262,12 @@
- 							MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
- 						>;
- 					};
-+					pinctrl_i2c2_2: i2c2grp-2 {
-+						fsl,pins = <
-+							MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+							MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+						>;
-+					};
- 				};
- 
- 				i2c3 {
-@@ -239,6 +277,12 @@
- 							MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
- 						>;
- 					};
-+					pinctrl_i2c3_2: i2c3grp-2 {
-+						fsl,pins = <
-+							MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+							MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+						>;
-+					};
- 				};
- 
- 				uart1 {
-@@ -248,6 +292,12 @@
- 							MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- 						>;
- 					};
-+					pinctrl_uart1_2: uart1grp-2 {
-+						fsl,pins = <
-+							MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+							MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+						>;
-+					};
- 				};
- 
- 				uart2 {
-@@ -257,6 +307,21 @@
- 							MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
- 						>;
- 					};
-+					pinctrl_uart2_2: uart2grp-2 {
-+						fsl,pins = <
-+							MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+							MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+						>;
-+					};
-+				};
-+
-+				uart3 {
-+					pinctrl_uart3_1: uart3grp-1 {
-+						fsl,pins = <
-+							MX6Q_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
-+							MX6Q_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
-+						>;
-+					};
- 				};
- 
- 				uart4 {
-@@ -267,6 +332,15 @@
- 						>;
- 					};
- 				};
-+
-+				uart5 {
-+					pinctrl_uart5_1: uart5grp-1 {
-+						fsl,pins = <
-+							MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+							MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+						>;
-+					};
-+				};
- 
- 				usbotg {
- 					pinctrl_usbotg_1: usbotggrp-1 {
diff --git a/target/linux/imx6/patches-3.10/111-gw54xx.patch b/target/linux/imx6/patches-3.10/111-gw54xx.patch
deleted file mode 100644
index fa212ad711..0000000000
--- a/target/linux/imx6/patches-3.10/111-gw54xx.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- 	imx6dl-wandboard.dtb \
- 	imx6q-arm2.dtb \
- 	imx6q-gw5400-a.dtb \
-+	imx6q-gw54xx.dtb \
- 	imx6q-sabreauto.dtb \
- 	imx6q-sabrelite.dtb \
- 	imx6q-sabresd.dtb \
diff --git a/target/linux/imx6/patches-3.10/112-gw51xx.patch b/target/linux/imx6/patches-3.10/112-gw51xx.patch
deleted file mode 100644
index e222984920..0000000000
--- a/target/linux/imx6/patches-3.10/112-gw51xx.patch
+++ /dev/null
@@ -1,161 +0,0 @@
---- a/arch/arm/boot/dts/imx6dl.dtsi
-+++ b/arch/arm/boot/dts/imx6dl.dtsi
-@@ -105,6 +105,95 @@
- 					};
- 				};
- 
-+				gpmi-nand {
-+					pinctrl_gpmi_nand_1: gpmi-nand-1 {
-+						fsl,pins = <
-+							MX6DL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-+							MX6DL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-+							MX6DL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-+							MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+							MX6DL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-+							MX6DL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-+							MX6DL_PAD_NANDF_CS2__NAND_CE2_B   0xb0b1
-+							MX6DL_PAD_NANDF_CS3__NAND_CE3_B   0xb0b1
-+							MX6DL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-+							MX6DL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-+							MX6DL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-+							MX6DL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-+							MX6DL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-+							MX6DL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-+							MX6DL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-+							MX6DL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-+							MX6DL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-+							MX6DL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-+							MX6DL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-+						>;
-+					};
-+
-+					/* No strobe */
-+					pinctrl_gpmi_nand_2: gpmi-nand-2 {
-+						fsl,pins = <
-+							MX6DL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-+							MX6DL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-+							MX6DL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-+							MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+							MX6DL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-+							MX6DL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-+							MX6DL_PAD_NANDF_CS2__NAND_CE2_B   0xb0b1
-+							MX6DL_PAD_NANDF_CS3__NAND_CE3_B   0xb0b1
-+							MX6DL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-+							MX6DL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-+							MX6DL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-+							MX6DL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-+							MX6DL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-+							MX6DL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-+							MX6DL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-+							MX6DL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-+							MX6DL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-+							MX6DL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-+						>;
-+					};
-+				};
-+
-+				i2c1 {
-+					pinctrl_i2c1_1: i2c1grp-1 {
-+						fsl,pins = <
-+							MX6DL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+							MX6DL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+						>;
-+					};
-+				};
-+
-+				i2c2 {
-+					pinctrl_i2c2_1: i2c2grp-1 {
-+						fsl,pins = <
-+							MX6DL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
-+							MX6DL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
-+						>;
-+					};
-+					pinctrl_i2c2_2: i2c2grp-2 {
-+						fsl,pins = <
-+							MX6DL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+							MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+						>;
-+					};
-+				};
-+
-+				i2c3 {
-+					pinctrl_i2c3_1: i2c3grp-1 {
-+						fsl,pins = <
-+							MX6DL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-+							MX6DL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-+						>;
-+					};
-+					pinctrl_i2c3_2: i2c3grp-2 {
-+						fsl,pins = <
-+							MX6DL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+							MX6DL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+						>;
-+					};
-+				};
-+
- 				uart1 {
- 					pinctrl_uart1_1: uart1grp-1 {
- 						fsl,pins = <
-@@ -112,6 +201,36 @@
- 							MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- 						>;
- 					};
-+					pinctrl_uart1_2: uart1grp-2 {
-+						fsl,pins = <
-+							MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+							MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+						>;
-+					};
-+				};
-+
-+				uart2 {
-+					pinctrl_uart2_1: uart2grp-1 {
-+						fsl,pins = <
-+							MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+							MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+						>;
-+					};
-+					pinctrl_uart2_2: uart2grp-2 {
-+						fsl,pins = <
-+							MX6DL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1
-+							MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1
-+						>;
-+					};
-+				};
-+
-+				uart3 {
-+					pinctrl_uart3_1: uart3grp-1 {
-+						fsl,pins = <
-+							MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+							MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+						>;
-+					};
- 				};
- 
- 				uart4 {
-@@ -122,6 +241,15 @@
- 						>;
- 					};
- 				};
-+
-+				uart5 {
-+					pinctrl_uart5_1: uart5grp-1 {
-+						fsl,pins = <
-+							MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+							MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+						>;
-+					};
-+				};
- 
- 				usbotg {
- 					pinctrl_usbotg_2: usbotggrp-2 {
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -119,6 +119,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- 	imx6q-arm2.dtb \
- 	imx6q-gw5400-a.dtb \
- 	imx6q-gw54xx.dtb \
-+	imx6dl-gw51xx.dtb \
- 	imx6q-sabreauto.dtb \
- 	imx6q-sabrelite.dtb \
- 	imx6q-sabresd.dtb \
diff --git a/target/linux/imx6/patches-3.10/113-gw52xx.patch b/target/linux/imx6/patches-3.10/113-gw52xx.patch
deleted file mode 100644
index 6e48d30272..0000000000
--- a/target/linux/imx6/patches-3.10/113-gw52xx.patch
+++ /dev/null
@@ -1,57 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -120,6 +120,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- 	imx6q-gw5400-a.dtb \
- 	imx6q-gw54xx.dtb \
- 	imx6dl-gw51xx.dtb \
-+	imx6dl-gw52xx.dtb \
- 	imx6q-sabreauto.dtb \
- 	imx6q-sabrelite.dtb \
- 	imx6q-sabresd.dtb \
---- a/arch/arm/boot/dts/imx6dl.dtsi
-+++ b/arch/arm/boot/dts/imx6dl.dtsi
-@@ -37,6 +37,18 @@
- 				compatible = "fsl,imx6dl-iomuxc";
- 				reg = <0x020e0000 0x4000>;
- 
-+				/* shared pinctrl settings */
-+				audmux {
-+					pinctrl_audmux_1: audmux-1 {
-+						fsl,pins = <
-+							MX6DL_PAD_SD2_DAT0__AUD4_RXD  0x80000000
-+							MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
-+							MX6DL_PAD_SD2_DAT2__AUD4_TXD  0x80000000
-+							MX6DL_PAD_SD2_DAT3__AUD4_TXC  0x80000000
-+						>;
-+					};
-+				};
-+
- 				enet {
- 					pinctrl_enet_1: enetgrp-1 {
- 						fsl,pins = <
-@@ -222,6 +234,12 @@
- 							MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1
- 						>;
- 					};
-+					pinctrl_uart2_3: uart2grp-3 {
-+						fsl,pins = <
-+							MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+							MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+						>;
-+					};
- 				};
- 
- 				uart3 {
-@@ -252,6 +270,12 @@
- 				};
- 
- 				usbotg {
-+					pinctrl_usbotg_1: usbotggrp-1 {
-+						fsl,pins = <
-+							MX6DL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+						>;
-+					};
-+
- 					pinctrl_usbotg_2: usbotggrp-2 {
- 						fsl,pins = <
- 							MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
diff --git a/target/linux/imx6/patches-3.10/114-gw53xx.patch b/target/linux/imx6/patches-3.10/114-gw53xx.patch
deleted file mode 100644
index 9c31204640..0000000000
--- a/target/linux/imx6/patches-3.10/114-gw53xx.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -121,6 +121,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- 	imx6q-gw54xx.dtb \
- 	imx6dl-gw51xx.dtb \
- 	imx6dl-gw52xx.dtb \
-+	imx6dl-gw53xx.dtb \
- 	imx6q-sabreauto.dtb \
- 	imx6q-sabrelite.dtb \
- 	imx6q-sabresd.dtb \
diff --git a/target/linux/imx6/profiles/120-gateworks.mk b/target/linux/imx6/profiles/120-gateworks.mk
index 13c4359615..f74e2d8e8f 100644
--- a/target/linux/imx6/profiles/120-gateworks.mk
+++ b/target/linux/imx6/profiles/120-gateworks.mk
@@ -40,7 +40,11 @@ VENTANA_DTS:= \
 	imx6dl-gw51xx \
 	imx6dl-gw52xx \
 	imx6dl-gw53xx \
-	imx6q-gw5400-a \
-	imx6q-gw54xx
+	imx6dl-gw54xx \
+	imx6q-gw51xx \
+	imx6q-gw52xx \
+	imx6q-gw53xx \
+	imx6q-gw54xx \
+	imx6q-gw5400-a
 
 $(eval $(call Profile,VENTANA))