tegra: add kernel 4.19 support

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>

2 files changed, 123 insertions, 0 deletions

diff --git a/target/linux/tegra/patches-4.19/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch b/target/linux/tegra/patches-4.19/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch
new file mode 100644
index 0000000000..9e8c331934
--- /dev/null
+++ b/target/linux/tegra/patches-4.19/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch
@@ -0,0 +1,77 @@
+From patchwork Fri Jul 13 11:32:42 2018
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: serial8250 on tegra hsuart: recover from spurious interrupts due to
+ tegra2 silicon bug
+X-Patchwork-Submitter: "David R. Piegdon" <lkml@p23q.org>
+X-Patchwork-Id: 943440
+Message-Id: <4676ea34-69ce-5422-1ded-94218b89f7d9@p23q.org>
+To: linux-tegra@vger.kernel.org
+Date: Fri, 13 Jul 2018 11:32:42 +0000
+From: "David R. Piegdon" <lkml@p23q.org>
+List-Id: <linux-tegra.vger.kernel.org>
+
+Hi,
+a while back I sent a few mails regarding spurious interrupts in the
+UARTA (hsuart) block of the Tegra2 SoC, when using the 8250 driver for
+it instead of the hsuart driver. After going down a pretty deep
+debugging/testing hole, I think I found a patch that fixes the issue. So
+far testing in a reboot-cycle suggests that the error frequency dropped
+from >3% of all reboots to at least <0.05% of all reboots. Tests
+continue to run over the weekend.
+
+The patch below already is a second iteration; the first did not reset
+the MCR or contain the lines below '// clear interrupts'. This resulted
+in no more spurious interrupts, but in a few % of spurious interrupts
+that were recovered the UART block did not receive any characters any
+more. So further resetting was required to fully reacquire operational
+state of the UART block.
+
+I'd love any comments/suggestions on this!
+
+Cheers,
+
+David
+
+--- a/drivers/tty/serial/8250/8250_core.c
++++ b/drivers/tty/serial/8250/8250_core.c
+@@ -136,6 +136,38 @@ static irqreturn_t serial8250_interrupt(
+ 				"serial8250: too much work for irq%d\n", irq);
+ 			break;
+ 		}
++
++#ifdef CONFIG_ARCH_TEGRA_2x_SOC
++		if (!handled && (port->type == PORT_TEGRA)) {
++			/*
++			 * Fix Tegra 2 CPU silicon bug where sometimes
++			 * "TX holding register empty" interrupts result in a
++			 * bad (metastable?) state in Tegras HSUART IP core.
++			 * Only way to recover seems to be to reset all
++			 * interrupts as well as the TX queue and the MCR.
++			 * But we don't want to loose any outgoing characters,
++			 * so only do it if the RX and TX queues are empty.
++			 */
++			unsigned char lsr = port->serial_in(port, UART_LSR);
++			const unsigned char fifo_empty_mask =
++						(UART_LSR_TEMT | UART_LSR_THRE);
++			if (((lsr & (UART_LSR_DR | fifo_empty_mask)) ==
++							fifo_empty_mask)) {
++				port->serial_out(port, UART_IER, 0);
++				port->serial_out(port, UART_MCR, 0);
++				serial8250_clear_and_reinit_fifos(up);
++				port->serial_out(port, UART_MCR, up->mcr);
++				port->serial_out(port, UART_IER, up->ier);
++				// clear interrupts
++				serial_port_in(port, UART_LSR);
++				serial_port_in(port, UART_RX);
++				serial_port_in(port, UART_IIR);
++				serial_port_in(port, UART_MSR);
++				up->lsr_saved_flags = 0;
++				up->msr_saved_flags = 0;
++			}
++		}
++#endif
+ 	} while (l != end);
+ 
+ 	spin_unlock(&i->lock);
diff --git a/target/linux/tegra/patches-4.19/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch b/target/linux/tegra/patches-4.19/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch
new file mode 100644
index 0000000000..ae48e8d862
--- /dev/null
+++ b/target/linux/tegra/patches-4.19/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch
@@ -0,0 +1,46 @@
+--- a/arch/arm/boot/dts/tegra20-trimslice.dts
++++ b/arch/arm/boot/dts/tegra20-trimslice.dts
+@@ -200,16 +200,17 @@
+ 			conf_ata {
+ 				nvidia,pins = "ata", "atc", "atd", "ate",
+ 					"crtp", "dap2", "dap3", "dap4", "dta",
+-					"dtb", "dtc", "dtd", "dte", "gmb",
+-					"gme", "i2cp", "pta", "slxc", "slxd",
+-					"spdi", "spdo", "uda";
++					"dtb", "dtc", "dtd", "gmb", "gme",
++					"i2cp", "pta", "slxc", "slxd", "spdi",
++					"spdo", "uda";
+ 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ 			};
+ 			conf_atb {
+ 				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
+-					"gma", "gmc", "gmd", "gpu", "gpu7",
+-					"gpv", "sdio1", "slxa", "slxk", "uac";
++					"dte", "gma", "gmc", "gmd", "gpu",
++					"gpu7", "gpv", "sdio1", "slxa", "slxk",
++					"uac";
+ 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ 			};
+@@ -402,6 +403,20 @@
+ 		};
+ 	};
+ 
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		ds2 {
++			label = "trimslice:green:right";
++			gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>;
++		};
++
++		ds3 {
++			label = "trimslice:green:left";
++			gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>;
++		};
++	};
++
+ 	poweroff {
+ 		compatible = "gpio-poweroff";
+ 		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;