diff options
| author | Petr Štetiar <ynezz@true.cz> | 2020-03-16 10:57:50 +0100 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-03-28 13:03:02 +0100 |
| commit | 0784d07c11eb0eadf0d4426cc7dba3642ff5762c (patch) | |
| tree | ab9025bc6aab725e5a7decce5ee43f656451e862 /target/linux/sunxi | |
| parent | c31954f1cf8760a873b6cabbcef271149958886d (diff) | |
| download | upstream-0784d07c11eb0eadf0d4426cc7dba3642ff5762c.tar.gz upstream-0784d07c11eb0eadf0d4426cc7dba3642ff5762c.tar.bz2 upstream-0784d07c11eb0eadf0d4426cc7dba3642ff5762c.zip | |
sunxi: a53: add support for Olimex A64-Olinuxino eMMC
Specifications:
SoC: Allwinner A64 (1.2 GHz Quad-Core ARM Cortex-A53 64-bit)
RAM: 1GB or 2GB RAM DDR3L @ 672Mhz
Flash: 0/4/16GB eMMC flash memory for storage and boot
MicroSD card connector for cards up to 32GB
Debug: serial UART debug header with 0.1" pins
Wired connectivity: 10/100/1000Mbps GbE Ethernet
Wireless connectivity: on-board RTL8723BS 1T1R 802.11bgn WiFi and
Bluetooth 4.0 module with built-in antenna
(only available in the A64-OLinuXino-1G4GW)
Flashing instructions:
Standard sunxi SD card installation procedure - copy eMMC image to SD
card, insert in into SD card slot on the device and boot. You should see
something like following if the eMMC is detected correctly:
mmcblk2: mmc2:0001 P1XXXX 3.60 GiB
mmcblk2boot0: mmc2:0001 P1XXXX partition 1 16.0 MiB
mmcblk2boot1: mmc2:0001 P1XXXX partition 2 16.0 MiB
Then flash SD card eMMC image straight into the mmcblk2 device:
dd if=/mnt/openwrt...a64-olinuxino-emmc-squashfs-sdcard.img of=/dev/mmcblk2
It also possible to boot from boot0 partition[1]:
1. Compile U-Boot with CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x40
otherwise the U-Boot will get stuck in bootloop
2. Configure eMMC to boot from boot0 partition inside U-Boot:
mmc bootbus 1 1 0 0; mmc partconf 1 1 1 0
3. echo 0 > /sys/block/mmcblk2boot0/force_ro
4. Write U-Boot from offset 0 (not offset 8k as with SD card) into
boot0 partition
dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk2boot0
Known issues:
Wireless doesn't work properly via netifd.
1. https://linux-sunxi.org/index.php?title=Bootable_eMMC
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/sunxi')
| -rw-r--r-- | target/linux/sunxi/image/cortex-a53.mk | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/target/linux/sunxi/image/cortex-a53.mk b/target/linux/sunxi/image/cortex-a53.mk index 96885cf926..7a70de4dff 100644 --- a/target/linux/sunxi/image/cortex-a53.mk +++ b/target/linux/sunxi/image/cortex-a53.mk @@ -47,6 +47,16 @@ define Device/olimex_a64-olinuxino endef TARGET_DEVICES += olimex_a64-olinuxino +define Device/olimex_a64-olinuxino-emmc + DEVICE_VENDOR := Olimex + DEVICE_MODEL := A64-Olinuxino + DEVICE_VARIANT := eMMC + DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware + $(Device/sun50i-a64) + SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-olinuxino-emmc +endef +TARGET_DEVICES += olimex_a64-olinuxino-emmc + define Device/pine64_pine64-plus DEVICE_VENDOR := Pine64 DEVICE_MODEL := Pine64+ |