aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi
diff options
context:
space:
mode:
authorAleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>2020-02-05 20:31:00 +0100
committerPetr Štetiar <ynezz@true.cz>2020-02-13 17:45:46 +0100
commit5499b24dc01918a1e46c365537a4b4a07909e984 (patch)
tree5da5f0bd18c2f240c0c85651d82306ffd48bad9e /target/linux/sunxi
parentfbd00bb8d406a0ace7ea9c49a79cbad2418689a5 (diff)
downloadupstream-5499b24dc01918a1e46c365537a4b4a07909e984.tar.gz
upstream-5499b24dc01918a1e46c365537a4b4a07909e984.tar.bz2
upstream-5499b24dc01918a1e46c365537a4b4a07909e984.zip
sunxi: backport increased SATA/AHCI DMA TX/RX FIFOs
This backports SATA performance boost from 5.3 kernel: Increasing the SATA/AHCI DMA TX/RX FIFOs (P0DMACR.TXTS and .RXTS, ie. TX_TRANSACTION_SIZE and RX_TRANSACTION_SIZE) from default 0x0 each to 0x3 each, gives a write performance boost of 120 MiB/s to 132 MiB/s from lame 36 MiB/s to 45 MiB/s previously. Read performance is above 200 MiB/s. [tested on SSD using dd bs=4K/8K/12K/16K/20K/24K/32K: peak-perf at 12K] dd bs Before MB/s After MB/s Increase 4k 14.4 16.5 15% 64k 34.5 74.4 116% 1M 40.5 93.2 130% Ref: https://forum.openwrt.org/t/sunxi-sata-write-speed-patch/54555/5 Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> [commit subject & description tweaks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/sunxi')
-rw-r--r--target/linux/sunxi/patches-4.19/010-v5.3-drivers-ata-ahci_sunxi-Increased-SATA-AHCI-DMA-TX-RX.patch94
1 files changed, 94 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-4.19/010-v5.3-drivers-ata-ahci_sunxi-Increased-SATA-AHCI-DMA-TX-RX.patch b/target/linux/sunxi/patches-4.19/010-v5.3-drivers-ata-ahci_sunxi-Increased-SATA-AHCI-DMA-TX-RX.patch
new file mode 100644
index 0000000000..74e51c094c
--- /dev/null
+++ b/target/linux/sunxi/patches-4.19/010-v5.3-drivers-ata-ahci_sunxi-Increased-SATA-AHCI-DMA-TX-RX.patch
@@ -0,0 +1,94 @@
+From 120357ea176e420d313cf8cf2ff35fbe233d3bab Mon Sep 17 00:00:00 2001
+From: Uenal Mutlu <um@mutluit.com>
+Date: Mon, 13 May 2019 16:24:10 +0200
+Subject: [PATCH] drivers: ata: ahci_sunxi: Increased SATA/AHCI DMA TX/RX FIFOs
+
+Increasing the SATA/AHCI DMA TX/RX FIFOs (P0DMACR.TXTS and .RXTS, ie.
+TX_TRANSACTION_SIZE and RX_TRANSACTION_SIZE) from default 0x0 each
+to 0x3 each, gives a write performance boost of 120 MiB/s to 132 MiB/s
+from lame 36 MiB/s to 45 MiB/s previously.
+Read performance is above 200 MiB/s.
+[tested on SSD using dd bs=4K/8K/12K/16K/20K/24K/32K: peak-perf at 12K]
+
+Tested on the SBCs Banana Pi R1 (aka Lamobo R1) and Banana Pi M1 which
+are based on the Allwinner A20 32bit-SoC (ARMv7-a / arm-linux-gnueabihf).
+These devices are RaspberryPi-like small devices.
+
+This problem of slow SATA write-speed with these small devices lasts
+for about 7 years now (beginning with the A10 SoC). Many commentators
+throughout the years wrongly assumed the slow write speed was a
+hardware limitation. This patch finally solves the problem, which
+in fact was just a hard-to-find software problem due to lack of
+SATA/AHCI documentation by the SoC-maker Allwinner Technology.
+
+Lists of the affected sunxi and other boards and SoCs with SATA using
+the ahci_sunxi driver:
+ $ grep -i -e "^&ahci" arch/arm/boot/dts/sun*dts
+ and http://linux-sunxi.org/SATA#Devices_with_SATA_ports
+ See also http://linux-sunxi.org/Category:Devices_with_SATA_port
+
+Tested-by: Chen-Yu Tsai <wens@csie.org>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Reviewed-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Uenal Mutlu <um@mutluit.com>
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+---
+ drivers/ata/ahci_sunxi.c | 47 ++++++++++++++++++++++++++++++++++++++--
+ 1 file changed, 45 insertions(+), 2 deletions(-)
+
+--- a/drivers/ata/ahci_sunxi.c
++++ b/drivers/ata/ahci_sunxi.c
+@@ -157,8 +157,51 @@ static void ahci_sunxi_start_engine(stru
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+- /* Setup DMA before DMA start */
+- sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400);
++ /* Setup DMA before DMA start
++ *
++ * NOTE: A similar SoC with SATA/AHCI by Texas Instruments documents
++ * this Vendor Specific Port (P0DMACR, aka PxDMACR) in its
++ * User's Guide document (TMS320C674x/OMAP-L1x Processor
++ * Serial ATA (SATA) Controller, Literature Number: SPRUGJ8C,
++ * March 2011, Chapter 4.33 Port DMA Control Register (P0DMACR),
++ * p.68, https://www.ti.com/lit/ug/sprugj8c/sprugj8c.pdf)
++ * as equivalent to the following struct:
++ *
++ * struct AHCI_P0DMACR_t
++ * {
++ * unsigned TXTS : 4;
++ * unsigned RXTS : 4;
++ * unsigned TXABL : 4;
++ * unsigned RXABL : 4;
++ * unsigned Reserved : 16;
++ * };
++ *
++ * TXTS: Transmit Transaction Size (TX_TRANSACTION_SIZE).
++ * This field defines the DMA transaction size in DWORDs for
++ * transmit (system bus read, device write) operation. [...]
++ *
++ * RXTS: Receive Transaction Size (RX_TRANSACTION_SIZE).
++ * This field defines the Port DMA transaction size in DWORDs
++ * for receive (system bus write, device read) operation. [...]
++ *
++ * TXABL: Transmit Burst Limit.
++ * This field allows software to limit the VBUSP master read
++ * burst size. [...]
++ *
++ * RXABL: Receive Burst Limit.
++ * Allows software to limit the VBUSP master write burst
++ * size. [...]
++ *
++ * Reserved: Reserved.
++ *
++ *
++ * NOTE: According to the above document, the following alternative
++ * to the code below could perhaps be a better option
++ * (or preparation) for possible further improvements later:
++ * sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ffff,
++ * 0x00000033);
++ */
++ sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ffff, 0x00004433);
+
+ /* Start DMA */
+ sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START);