aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2017-10-01 14:01:28 +0200
committerHauke Mehrtens <hauke@hauke-m.de>2017-11-23 19:16:42 +0100
commitc048ca0ce03608e0906137aaf5d3a3abc8d16991 (patch)
tree09b38e917973df27d2d27a3cd262a0e407896e6f /target/linux/sunxi
parent4e93ec1ad6798695f32d67e9b24f9d7637f85008 (diff)
downloadupstream-c048ca0ce03608e0906137aaf5d3a3abc8d16991.tar.gz
upstream-c048ca0ce03608e0906137aaf5d3a3abc8d16991.tar.bz2
upstream-c048ca0ce03608e0906137aaf5d3a3abc8d16991.zip
sunxi: backport sunxi-mmc controller driver from 4.13
There are multiple problems on the A64 SoC with the older drivers which are fixed in the upstream kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/sunxi')
-rw-r--r--target/linux/sunxi/patches-4.9/090-sunxi-mmc-from-4-13.patch288
1 files changed, 288 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-4.9/090-sunxi-mmc-from-4-13.patch b/target/linux/sunxi/patches-4.9/090-sunxi-mmc-from-4-13.patch
new file mode 100644
index 0000000000..e64581ff83
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/090-sunxi-mmc-from-4-13.patch
@@ -0,0 +1,288 @@
+--- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
++++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
+@@ -13,6 +13,7 @@ Required properties:
+ * "allwinner,sun5i-a13-mmc"
+ * "allwinner,sun7i-a20-mmc"
+ * "allwinner,sun9i-a80-mmc"
++ * "allwinner,sun50i-a64-emmc"
+ * "allwinner,sun50i-a64-mmc"
+ - reg : mmc controller base registers
+ - clocks : a list with 4 phandle + clock specifier pairs
+--- a/drivers/mmc/host/sunxi-mmc.c
++++ b/drivers/mmc/host/sunxi-mmc.c
+@@ -5,6 +5,7 @@
+ * (C) Copyright 2013-2014 O2S GmbH <www.o2s.ch>
+ * (C) Copyright 2013-2014 David Lanzend�rfer <david.lanzendoerfer@o2s.ch>
+ * (C) Copyright 2013-2014 Hans de Goede <hdegoede@redhat.com>
++ * (C) Copyright 2017 Sootech SA
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+@@ -101,6 +102,7 @@
+ (SDXC_SOFT_RESET | SDXC_FIFO_RESET | SDXC_DMA_RESET)
+
+ /* clock control bits */
++#define SDXC_MASK_DATA0 BIT(31)
+ #define SDXC_CARD_CLOCK_ON BIT(16)
+ #define SDXC_LOW_POWER_ON BIT(17)
+
+@@ -253,6 +255,11 @@ struct sunxi_mmc_cfg {
+
+ /* does the IP block support autocalibration? */
+ bool can_calibrate;
++
++ /* Does DATA0 needs to be masked while the clock is updated */
++ bool mask_data0;
++
++ bool needs_new_timings;
+ };
+
+ struct sunxi_mmc_host {
+@@ -482,7 +489,7 @@ static void sunxi_mmc_dump_errinfo(struc
+ cmd->opcode == SD_IO_RW_DIRECT))
+ return;
+
+- dev_err(mmc_dev(host->mmc),
++ dev_dbg(mmc_dev(host->mmc),
+ "smc %d err, cmd %d,%s%s%s%s%s%s%s%s%s%s !!\n",
+ host->mmc->index, cmd->opcode,
+ data ? (data->flags & MMC_DATA_WRITE ? " WR" : " RD") : "",
+@@ -654,11 +661,16 @@ static int sunxi_mmc_oclk_onoff(struct s
+ unsigned long expire = jiffies + msecs_to_jiffies(750);
+ u32 rval;
+
++ dev_dbg(mmc_dev(host->mmc), "%sabling the clock\n",
++ oclk_en ? "en" : "dis");
++
+ rval = mmc_readl(host, REG_CLKCR);
+- rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON);
++ rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON | SDXC_MASK_DATA0);
+
+ if (oclk_en)
+ rval |= SDXC_CARD_CLOCK_ON;
++ if (host->cfg->mask_data0)
++ rval |= SDXC_MASK_DATA0;
+
+ mmc_writel(host, REG_CLKCR, rval);
+
+@@ -678,46 +690,29 @@ static int sunxi_mmc_oclk_onoff(struct s
+ return -EIO;
+ }
+
++ if (host->cfg->mask_data0) {
++ rval = mmc_readl(host, REG_CLKCR);
++ mmc_writel(host, REG_CLKCR, rval & ~SDXC_MASK_DATA0);
++ }
++
+ return 0;
+ }
+
+ static int sunxi_mmc_calibrate(struct sunxi_mmc_host *host, int reg_off)
+ {
+- u32 reg = readl(host->reg_base + reg_off);
+- u32 delay;
+- unsigned long timeout;
+-
+ if (!host->cfg->can_calibrate)
+ return 0;
+
+- reg &= ~(SDXC_CAL_DL_MASK << SDXC_CAL_DL_SW_SHIFT);
+- reg &= ~SDXC_CAL_DL_SW_EN;
+-
+- writel(reg | SDXC_CAL_START, host->reg_base + reg_off);
+-
+- dev_dbg(mmc_dev(host->mmc), "calibration started\n");
+-
+- timeout = jiffies + HZ * SDXC_CAL_TIMEOUT;
+-
+- while (!((reg = readl(host->reg_base + reg_off)) & SDXC_CAL_DONE)) {
+- if (time_before(jiffies, timeout))
+- cpu_relax();
+- else {
+- reg &= ~SDXC_CAL_START;
+- writel(reg, host->reg_base + reg_off);
+-
+- return -ETIMEDOUT;
+- }
+- }
+-
+- delay = (reg >> SDXC_CAL_DL_SHIFT) & SDXC_CAL_DL_MASK;
+-
+- reg &= ~SDXC_CAL_START;
+- reg |= (delay << SDXC_CAL_DL_SW_SHIFT) | SDXC_CAL_DL_SW_EN;
+-
+- writel(reg, host->reg_base + reg_off);
+-
+- dev_dbg(mmc_dev(host->mmc), "calibration ended, reg is 0x%x\n", reg);
++ /*
++ * FIXME:
++ * This is not clear how the calibration is supposed to work
++ * yet. The best rate have been obtained by simply setting the
++ * delay to 0, as Allwinner does in its BSP.
++ *
++ * The only mode that doesn't have such a delay is HS400, that
++ * is in itself a TODO.
++ */
++ writel(SDXC_CAL_DL_SW_EN, host->reg_base + reg_off);
+
+ return 0;
+ }
+@@ -745,6 +740,7 @@ static int sunxi_mmc_clk_set_phase(struc
+ index = SDXC_CLK_50M_DDR;
+ }
+ } else {
++ dev_dbg(mmc_dev(host->mmc), "Invalid clock... returning\n");
+ return -EINVAL;
+ }
+
+@@ -757,10 +753,21 @@ static int sunxi_mmc_clk_set_phase(struc
+ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
+ struct mmc_ios *ios)
+ {
++ struct mmc_host *mmc = host->mmc;
+ long rate;
+ u32 rval, clock = ios->clock;
+ int ret;
+
++ ret = sunxi_mmc_oclk_onoff(host, 0);
++ if (ret)
++ return ret;
++
++ /* Our clock is gated now */
++ mmc->actual_clock = 0;
++
++ if (!ios->clock)
++ return 0;
++
+ /* 8 bit DDR requires a higher module clock */
+ if (ios->timing == MMC_TIMING_MMC_DDR52 &&
+ ios->bus_width == MMC_BUS_WIDTH_8)
+@@ -768,25 +775,21 @@ static int sunxi_mmc_clk_set_rate(struct
+
+ rate = clk_round_rate(host->clk_mmc, clock);
+ if (rate < 0) {
+- dev_err(mmc_dev(host->mmc), "error rounding clk to %d: %ld\n",
++ dev_err(mmc_dev(mmc), "error rounding clk to %d: %ld\n",
+ clock, rate);
+ return rate;
+ }
+- dev_dbg(mmc_dev(host->mmc), "setting clk to %d, rounded %ld\n",
++ dev_dbg(mmc_dev(mmc), "setting clk to %d, rounded %ld\n",
+ clock, rate);
+
+ /* setting clock rate */
+ ret = clk_set_rate(host->clk_mmc, rate);
+ if (ret) {
+- dev_err(mmc_dev(host->mmc), "error setting clk to %ld: %d\n",
++ dev_err(mmc_dev(mmc), "error setting clk to %ld: %d\n",
+ rate, ret);
+ return ret;
+ }
+
+- ret = sunxi_mmc_oclk_onoff(host, 0);
+- if (ret)
+- return ret;
+-
+ /* clear internal divider */
+ rval = mmc_readl(host, REG_CLKCR);
+ rval &= ~0xff;
+@@ -798,6 +801,13 @@ static int sunxi_mmc_clk_set_rate(struct
+ }
+ mmc_writel(host, REG_CLKCR, rval);
+
++ if (host->cfg->needs_new_timings) {
++ /* Don't touch the delay bits */
++ rval = mmc_readl(host, REG_SD_NTSR);
++ rval |= SDXC_2X_TIMING_MODE;
++ mmc_writel(host, REG_SD_NTSR, rval);
++ }
++
+ ret = sunxi_mmc_clk_set_phase(host, ios, rate);
+ if (ret)
+ return ret;
+@@ -806,9 +816,22 @@ static int sunxi_mmc_clk_set_rate(struct
+ if (ret)
+ return ret;
+
+- /* TODO: enable calibrate on sdc2 SDXC_REG_DS_DL_REG of A64 */
++ /*
++ * FIXME:
++ *
++ * In HS400 we'll also need to calibrate the data strobe
++ * signal. This should only happen on the MMC2 controller (at
++ * least on the A64).
++ */
++
++ ret = sunxi_mmc_oclk_onoff(host, 1);
++ if (ret)
++ return ret;
+
+- return sunxi_mmc_oclk_onoff(host, 1);
++ /* And we just enabled our clock back */
++ mmc->actual_clock = rate;
++
++ return 0;
+ }
+
+ static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+@@ -822,10 +845,13 @@ static void sunxi_mmc_set_ios(struct mmc
+ break;
+
+ case MMC_POWER_UP:
+- host->ferror = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
+- ios->vdd);
+- if (host->ferror)
+- return;
++ if (!IS_ERR(mmc->supply.vmmc)) {
++ host->ferror = mmc_regulator_set_ocr(mmc,
++ mmc->supply.vmmc,
++ ios->vdd);
++ if (host->ferror)
++ return;
++ }
+
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+ host->ferror = regulator_enable(mmc->supply.vqmmc);
+@@ -847,7 +873,9 @@ static void sunxi_mmc_set_ios(struct mmc
+ case MMC_POWER_OFF:
+ dev_dbg(mmc_dev(mmc), "power off!\n");
+ sunxi_mmc_reset_host(host);
+- mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
++ if (!IS_ERR(mmc->supply.vmmc))
++ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
++
+ if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled)
+ regulator_disable(mmc->supply.vqmmc);
+ host->vqmmc_enabled = false;
+@@ -877,7 +905,7 @@ static void sunxi_mmc_set_ios(struct mmc
+ mmc_writel(host, REG_GCTRL, rval);
+
+ /* set up clock */
+- if (ios->clock && ios->power_mode) {
++ if (ios->power_mode) {
+ host->ferror = sunxi_mmc_clk_set_rate(host, ios);
+ /* Android code had a usleep_range(50000, 55000); here */
+ }
+@@ -1084,6 +1112,14 @@ static const struct sunxi_mmc_cfg sun50i
+ .idma_des_size_bits = 16,
+ .clk_delays = NULL,
+ .can_calibrate = true,
++ .mask_data0 = true,
++ .needs_new_timings = true,
++};
++
++static const struct sunxi_mmc_cfg sun50i_a64_emmc_cfg = {
++ .idma_des_size_bits = 13,
++ .clk_delays = NULL,
++ .can_calibrate = true,
+ };
+
+ static const struct of_device_id sunxi_mmc_of_match[] = {
+@@ -1092,6 +1128,7 @@ static const struct of_device_id sunxi_m
+ { .compatible = "allwinner,sun7i-a20-mmc", .data = &sun7i_a20_cfg },
+ { .compatible = "allwinner,sun9i-a80-mmc", .data = &sun9i_a80_cfg },
+ { .compatible = "allwinner,sun50i-a64-mmc", .data = &sun50i_a64_cfg },
++ { .compatible = "allwinner,sun50i-a64-emmc", .data = &sun50i_a64_emmc_cfg },
+ { /* sentinel */ }
+ };
+ MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match);