aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi/patches-5.10
diff options
context:
space:
mode:
authorChukun Pan <amadeus@jmu.edu.cn>2021-10-18 12:20:03 +0800
committerHauke Mehrtens <hauke@hauke-m.de>2021-10-30 21:17:20 +0200
commitfde68cb80941a60be93ece75e808b5b407d11cc8 (patch)
tree35fa7d8756f4fc68c1589aa6a515854b4c9591ce /target/linux/sunxi/patches-5.10
parente43eb16efe97a597a2ebaa9f549d1daec2c8c2ab (diff)
downloadupstream-fde68cb80941a60be93ece75e808b5b407d11cc8.tar.gz
upstream-fde68cb80941a60be93ece75e808b5b407d11cc8.tar.bz2
upstream-fde68cb80941a60be93ece75e808b5b407d11cc8.zip
sunxi: add support for FriendlyARM NanoPi R1S H5
Specification: CPU: Allwinner H5, Quad-core Cortex-A53 DDR3 RAM: 512MB Network: 10/100/1000M Ethernet x 2 USB Host: Type-A x 1 MicroSD Slot x 1 MicroUSB: for power input Debug Serial Port: 3Pin pin-header LED: WAN, LAN, SYS KEY: Reset Power Supply: DC 5V/2A Installation: Write the image to SD Card with dd. Note: 1. OpenWrt currently does not support LED_FUNCTION, change back to the previous practice (Consistent with NanoPi R1). 2. Since the upstream commit https://github.com/torvalds/linux/bbc4d71 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), we need to change the phy-mode from rgmii to rgmii-id. So set phy-mode for 5.4 and 5.10 respectively. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Diffstat (limited to 'target/linux/sunxi/patches-5.10')
-rw-r--r--target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch230
-rw-r--r--target/linux/sunxi/patches-5.10/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch35
2 files changed, 265 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch b/target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch
new file mode 100644
index 0000000000..e0c25bcb53
--- /dev/null
+++ b/target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch
@@ -0,0 +1,230 @@
+From 9962cb9be2db877c232aaf00db40125c0d7bf4bc Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus@jmu.edu.cn>
+Date: Mon, 17 May 2021 00:35:22 +0800
+Subject: [PATCH] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
+
+The NanoPi R1S H5 is a open source board made by FriendlyElec.
+It has the following features:
+
+- Allwinner H5, Quad-core Cortex-A53
+- 512MB DDR3 RAM
+- 10/100/1000M Ethernet x 2
+- RTL8189ETV WiFi 802.11b/g/n
+- USB 2.0 host port (A)
+- MicroSD Slot
+- Serial Debug Port
+- 5V 2A DC power-supply
+
+Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
+Signed-off-by: Maxime Ripard <maxime@cerno.tech>
+Link: https://lore.kernel.org/r/20210516163523.9484-2-amadeus@jmu.edu.cn
+---
+ arch/arm64/boot/dts/allwinner/Makefile | 1 +
+ .../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 195 ++++++++++++++++++
+ 2 files changed, 196 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+
+--- a/arch/arm64/boot/dts/allwinner/Makefile
++++ b/arch/arm64/boot/dts/allwinner/Makefile
+@@ -24,6 +24,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-li
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
++dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+@@ -0,0 +1,191 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
++ *
++ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
++ * Copyright (C) 2017 Antony Antony <antony@phenome.org>
++ * Copyright (C) 2016 ARM Ltd.
++ */
++
++/dts-v1/;
++#include "sun50i-h5.dtsi"
++#include "sun50i-h5-cpu-opp.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
++/ {
++ model = "FriendlyARM NanoPi R1S H5";
++ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
++
++ aliases {
++ ethernet0 = &emac;
++ ethernet1 = &rtl8189etv;
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ sys {
++ label = "nanopi:red:sys";
++ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "heartbeat";
++ };
++
++ lan {
++ label = "nanopi:green:lan";
++ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
++ };
++
++ wan {
++ label = "nanopi:green:wan";
++ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ r-gpio-keys {
++ compatible = "gpio-keys";
++
++ reset {
++ label = "reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ reg_gmac_3v3: gmac-3v3 {
++ compatible = "regulator-fixed";
++ regulator-name = "gmac-3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ startup-delay-us = <100000>;
++ enable-active-high;
++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
++ };
++
++ reg_vcc3v3: vcc3v3 {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ reg_usb0_vbus: usb0-vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb0-vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ enable-active-high;
++ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
++ status = "okay";
++ };
++
++ vdd_cpux: gpio-regulator {
++ compatible = "regulator-gpio";
++ regulator-name = "vdd-cpux";
++ regulator-type = "voltage";
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1300000>;
++ regulator-ramp-delay = <50>; /* 4ms */
++ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
++ gpios-states = <0x1>;
++ states = <1100000 0x0>, <1300000 0x1>;
++ };
++
++ wifi_pwrseq: wifi_pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
++ post-power-on-delay-ms = <200>;
++ };
++};
++
++&cpu0 {
++ cpu-supply = <&vdd_cpux>;
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&ehci2 {
++ status = "okay";
++};
++
++&emac {
++ pinctrl-names = "default";
++ pinctrl-0 = <&emac_rgmii_pins>;
++ phy-supply = <&reg_gmac_3v3>;
++ phy-handle = <&ext_rgmii_phy>;
++ phy-mode = "rgmii-id";
++ status = "okay";
++};
++
++&external_mdio {
++ ext_rgmii_phy: ethernet-phy@7 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <7>;
++ };
++};
++
++&i2c0 {
++ status = "okay";
++
++ eeprom@51 {
++ compatible = "microchip,24c02";
++ reg = <0x51>;
++ pagesize = <16>;
++ };
++};
++
++&mmc0 {
++ vmmc-supply = <&reg_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
++ status = "okay";
++};
++
++&mmc1 {
++ vmmc-supply = <&reg_vcc3v3>;
++ vqmmc-supply = <&reg_vcc3v3>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ rtl8189etv: sdio_wifi@1 {
++ reg = <1>;
++ };
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&ohci2 {
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pa_pins>;
++ status = "okay";
++};
++
++&usb_otg {
++ dr_mode = "peripheral";
++ status = "okay";
++};
++
++&usbphy {
++ /* USB Type-A port's VBUS is always on */
++ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
++ usb0_vbus-supply = <&reg_usb0_vbus>;
++ status = "okay";
++};
diff --git a/target/linux/sunxi/patches-5.10/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch b/target/linux/sunxi/patches-5.10/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch
new file mode 100644
index 0000000000..4a429c746e
--- /dev/null
+++ b/target/linux/sunxi/patches-5.10/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch
@@ -0,0 +1,35 @@
+From 1845163a052efac124f00656eb72f38947630a42 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus@jmu.edu.cn>
+Date: Sun, 10 Oct 2021 21:50:18 +0800
+Subject: [PATCH] arm64: dts: allwinner: NanoPi R1S H5: add status LED aliases
+
+Use the SYS LED on the casing for showing system status.
+
+Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+@@ -22,6 +22,11 @@
+ ethernet0 = &emac;
+ ethernet1 = &rtl8189etv;
+ serial0 = &uart0;
++
++ led-boot = &led_sys;
++ led-failsafe = &led_sys;
++ led-running = &led_sys;
++ led-upgrade = &led_sys;
+ };
+
+ chosen {
+@@ -31,7 +36,7 @@
+ leds {
+ compatible = "gpio-leds";
+
+- sys {
++ led_sys: sys {
+ label = "nanopi:red:sys";
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";