sunxi: add testing Linux 5.10

Add testing Linux kernel 5.10 for sunxi targets.

Removed patches were replaced by upstream commits:

- 410-v5.6-arm64-dts-allwinner-a64-olinuxino-Add-bank-supply-re.patch
   f0c3b29f56f0a arm64: dts: allwinner: a64: olinuxino: Add bank supply regulators

- 420-v5.7-arm64-dts-allwinner-a64-olinuxino-add-user-red-LED.patch
   89866b2667e0d arm64: dts: allwinner: a64: olinuxino: add user red LED

- 440-add-h6-pwm.patch
   a7fe985633f92 pwm: sun4i: Add an optional probe for reset line
   b8d74644f34a8 pwm: sun4i: Prefer "mod" clock to unnamed
   5b090b430d750 pwm: sun4i: Add an optional probe for bus clock
   fa4d81784681a pwm: sun4i: Always calculate params when applying new parameters
   9f28e95b5286f pwm: sun4i: Add support to output source clock directly
   fdd2c12e3761f pwm: sun4i: Add support for H6 PWM

- 441-arm64-dts-add-PWM-node.patch
   88432f5f8469b arm64: dts: allwinner: h6: Add PWM node

- 443-board-h6-orangepioneplus-fix-missing-ethernet.patch
   7ee32a17e0d65 arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet

Run tested on friendlyarm,nanopi-neo (allwinner,sun8i-h3), looks all good.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

1 files changed, 79 insertions, 0 deletions

diff --git a/target/linux/sunxi/patches-5.10/062-add-sun8i-h3-zeropi-support.patch b/target/linux/sunxi/patches-5.10/062-add-sun8i-h3-zeropi-support.patch
new file mode 100644
index 0000000000..893662b8e5
--- /dev/null
+++ b/target/linux/sunxi/patches-5.10/062-add-sun8i-h3-zeropi-support.patch
@@ -0,0 +1,79 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -1202,6 +1202,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
+ 	sun8i-h3-orangepi-zero-plus2.dtb \
+ 	sun8i-h3-rervision-dvk.dtb \
+ 	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
++	sun8i-h3-zeropi.dtb \
+ 	sun8i-r16-bananapi-m2m.dtb \
+ 	sun8i-r16-nintendo-nes-classic.dtb \
+ 	sun8i-r16-nintendo-super-nes-classic.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
+@@ -0,0 +1,66 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++#include "sun8i-h3-nanopi.dtsi"
++
++/ {
++	model = "FriendlyElec ZeroPi";
++	compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3";
++
++	aliases {
++		ethernet0 = &emac;
++	};
++
++	reg_gmac_3v3: gmac-3v3 {
++		compatible = "regulator-fixed";
++		pinctrl-names = "default";
++		pinctrl-0 = <&gmac_power_pin_nanopi>;
++		regulator-name = "gmac-3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		startup-delay-us = <100000>;
++		enable-active-high;
++		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
++	};
++};
++
++&ehci0 {
++	status = "okay";
++};
++
++&ohci0 {
++	status = "okay";
++};
++
++&pio {
++	gmac_power_pin_nanopi: gmac_power_pin@0 {
++		pins = "PD6";
++		function = "gpio_out";
++	};
++};
++
++&external_mdio {
++	ext_rgmii_phy: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <7>;
++	};
++};
++
++&emac {
++	pinctrl-names = "default";
++	pinctrl-0 = <&emac_rgmii_pins>;
++	phy-supply = <&reg_gmac_3v3>;
++	phy-handle = <&ext_rgmii_phy>;
++	phy-mode = "rgmii";
++
++	allwinner,leds-active-low;
++	status = "okay";
++};
++
++&usb_otg {
++	status = "okay";
++	dr_mode = "peripheral";
++};
++
++&usbphy {
++	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
++};