aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch
diff options
context:
space:
mode:
authorZoltan Herpai <wigyori@uid0.hu>2016-01-09 16:20:39 +0000
committerZoltan Herpai <wigyori@uid0.hu>2016-01-09 16:20:39 +0000
commita6611a92d5f4d3bab43feb1abf36924caf3ecc87 (patch)
treebb29022fd41ba5d5bae6022bfab6f48d2c2da574 /target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch
parent24894e52bc688844dfc96fc80073f2ac3196f992 (diff)
downloadupstream-a6611a92d5f4d3bab43feb1abf36924caf3ecc87.tar.gz
upstream-a6611a92d5f4d3bab43feb1abf36924caf3ecc87.tar.bz2
upstream-a6611a92d5f4d3bab43feb1abf36924caf3ecc87.zip
sunxi: initial 4.4 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48161
Diffstat (limited to 'target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch')
-rw-r--r--target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch126
1 files changed, 126 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch b/target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch
new file mode 100644
index 0000000000..47c6332a77
--- /dev/null
+++ b/target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch
@@ -0,0 +1,126 @@
+From 317c5224795b41a08ba8c08573d74ba95096faa5 Mon Sep 17 00:00:00 2001
+From: Reinder de Haan <patchesrdh@mveas.com>
+Date: Fri, 11 Dec 2015 16:32:18 +0100
+Subject: [PATCH] phy-sun4i-usb: Add support for the host usb-phys found on the
+ H3 SoC
+
+Note this commit only adds support for phys 1-3, phy 0, the otg phy, is
+not yet (fully) supported after this commit.
+
+Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Rob Herring <robh@kernel.org>
+Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
+---
+ .../devicetree/bindings/phy/sun4i-usb-phy.txt | 1 +
+ drivers/phy/phy-sun4i-usb.c | 41 +++++++++++++++++-----
+ 2 files changed, 33 insertions(+), 9 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+index 0cebf74..95736d7 100644
+--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
++++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+@@ -9,6 +9,7 @@ Required properties:
+ * allwinner,sun7i-a20-usb-phy
+ * allwinner,sun8i-a23-usb-phy
+ * allwinner,sun8i-a33-usb-phy
++ * allwinner,sun8i-h3-usb-phy
+ - reg : a list of offset + length pairs
+ - reg-names :
+ * "phy_ctrl"
+diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
+index 35b1fa3..bae54f7 100644
+--- a/drivers/phy/phy-sun4i-usb.c
++++ b/drivers/phy/phy-sun4i-usb.c
+@@ -47,6 +47,9 @@
+ #define REG_PHYBIST 0x08
+ #define REG_PHYTUNE 0x0c
+ #define REG_PHYCTL_A33 0x10
++#define REG_PHY_UNK_H3 0x20
++
++#define REG_PMU_UNK_H3 0x10
+
+ #define PHYCTL_DATA BIT(7)
+
+@@ -80,7 +83,7 @@
+ #define PHY_DISCON_TH_SEL 0x2a
+ #define PHY_SQUELCH_DETECT 0x3c
+
+-#define MAX_PHYS 3
++#define MAX_PHYS 4
+
+ /*
+ * Note do not raise the debounce time, we must report Vusb high within 100ms
+@@ -92,6 +95,7 @@
+ enum sun4i_usb_phy_type {
+ sun4i_a10_phy,
+ sun8i_a33_phy,
++ sun8i_h3_phy,
+ };
+
+ struct sun4i_usb_phy_cfg {
+@@ -239,6 +243,7 @@ static int sun4i_usb_phy_init(struct phy *_phy)
+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+ int ret;
++ u32 val;
+
+ ret = clk_prepare_enable(phy->clk);
+ if (ret)
+@@ -250,16 +255,26 @@ static int sun4i_usb_phy_init(struct phy *_phy)
+ return ret;
+ }
+
+- /* Enable USB 45 Ohm resistor calibration */
+- if (phy->index == 0)
+- sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
++ if (data->cfg->type == sun8i_h3_phy) {
++ if (phy->index == 0) {
++ val = readl(data->base + REG_PHY_UNK_H3);
++ writel(val & ~1, data->base + REG_PHY_UNK_H3);
++ }
++
++ val = readl(phy->pmu + REG_PMU_UNK_H3);
++ writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
++ } else {
++ /* Enable USB 45 Ohm resistor calibration */
++ if (phy->index == 0)
++ sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
+
+- /* Adjust PHY's magnitude and rate */
+- sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
++ /* Adjust PHY's magnitude and rate */
++ sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
+
+- /* Disconnect threshold adjustment */
+- sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
+- data->cfg->disc_thresh, 2);
++ /* Disconnect threshold adjustment */
++ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
++ data->cfg->disc_thresh, 2);
++ }
+
+ sun4i_usb_phy_passby(phy, 1);
+
+@@ -726,6 +741,13 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
+ .dedicated_clocks = true,
+ };
+
++static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
++ .num_phys = 4,
++ .type = sun8i_h3_phy,
++ .disc_thresh = 3,
++ .dedicated_clocks = true,
++};
++
+ static const struct of_device_id sun4i_usb_phy_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
+ { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
+@@ -733,6 +755,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
+ { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
+ { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
+ { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
++ { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
+ { },
+ };
+ MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);