sunxi: delete old kernel versions

Signed-off-by: Felix Fietkau <nbd@nbd.name>

1 files changed, 0 insertions, 248 deletions

diff --git a/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch b/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch
deleted file mode 100644
index 5d5ba11e63..0000000000
--- a/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch
+++ /dev/null
@@ -1,248 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -441,6 +441,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
- 	sun7i-a20-cubietruck.dtb \
- 	sun7i-a20-hummingbird.dtb \
- 	sun7i-a20-i12-tvbox.dtb \
-+	sun7i-a20-lamobo-r1.dtb \
- 	sun7i-a20-olinuxino-lime.dtb \
- 	sun7i-a20-olinuxino-micro.dtb \
- 	sun7i-a20-pcduino3.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
-@@ -0,0 +1,235 @@
-+/*
-+ * Copyright 2015 Daniel Golle <daniel@makrotopia.org>
-+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This library is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This library is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ *     You should have received a copy of the GNU General Public
-+ *     License along with this library; if not, write to the Free
-+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-+ *     MA 02110-1301 USA
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+/include/ "sun7i-a20.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+	model = "Lamobo R1";
-+	compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
-+
-+	soc@01c00000 {
-+		spi0: spi@01c05000 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&spi0_pins_a>;
-+			status = "okay";
-+		};
-+
-+		mmc0: mmc@01c0f000 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo>;
-+			vmmc-supply = <&reg_vcc3v3>;
-+			bus-width = <4>;
-+			cd-gpios = <&pio 7 10 0>; /* PH10 */
-+			cd-inverted;
-+			status = "okay";
-+		};
-+
-+		usbphy: phy@01c13400 {
-+			usb1_vbus-supply = <&reg_usb1_vbus>;
-+			usb2_vbus-supply = <&reg_usb2_vbus>;
-+			status = "okay";
-+		};
-+
-+		ehci0: usb@01c14000 {
-+			status = "okay";
-+		};
-+
-+		ohci0: usb@01c14400 {
-+			status = "okay";
-+		};
-+
-+		ahci: sata@01c18000 {
-+			target-supply = <&reg_ahci_5v>;
-+			status = "okay";
-+		};
-+
-+		ehci1: usb@01c1c000 {
-+			status = "okay";
-+		};
-+
-+		ohci1: usb@01c1c400 {
-+			status = "okay";
-+		};
-+
-+		pinctrl@01c20800 {
-+			mmc0_cd_pin_lamobo: mmc0_cd_pin@0 {
-+				allwinner,pins = "PH10";
-+				allwinner,function = "gpio_in";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <1>;
-+			};
-+
-+			gmac_power_pin_lamobo: gmac_power_pin@0 {
-+				allwinner,pins = "PH23";
-+				allwinner,function = "gpio_out";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <0>;
-+			};
-+
-+			led_pins_lamobo: led_pins@0 {
-+				allwinner,pins = "PH2";
-+				allwinner,function = "gpio_out";
-+				allwinner,drive = <1>;
-+				allwinner,pull = <0>;
-+			};
-+		};
-+
-+		lradc: lradc@01c22800 {
-+			allwinner,chan0-step = <200>;
-+			linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
-+						KEY_MENU KEY_SEARCH KEY_HOME
-+						KEY_ESC KEY_ENTER>;
-+			status = "okay";
-+		};
-+
-+		ir0: ir@01c21800 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&ir0_pins_a>;
-+			status = "okay";
-+		};
-+
-+		uart0: serial@01c28000 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&uart0_pins_a>;
-+			status = "okay";
-+		};
-+
-+		uart3: serial@01c28c00 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&uart3_pins_b>;
-+			status = "okay";
-+		};
-+
-+		uart7: serial@01c29c00 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&uart7_pins_a>;
-+			status = "okay";
-+		};
-+
-+		i2c0: i2c@01c2ac00 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&i2c0_pins_a>;
-+			status = "okay";
-+
-+			axp209: pmic@34 {
-+				compatible = "x-powers,axp209";
-+				reg = <0x34>;
-+				interrupt-parent = <&nmi_intc>;
-+				interrupts = <0 8>;
-+
-+				interrupt-controller;
-+				#interrupt-cells = <1>;
-+			};
-+		};
-+
-+		i2c1: i2c@01c2b000 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&i2c1_pins_a>;
-+			status = "okay";
-+		};
-+
-+		i2c2: i2c@01c2b400 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&i2c2_pins_a>;
-+			status = "okay";
-+		};
-+
-+		gmac: ethernet@01c50000 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&gmac_pins_rgmii_a>;
-+			phy = <&phy1>;
-+			phy-mode = "rgmii";
-+			phy-supply = <&reg_gmac_3v3>;
-+			status = "okay";
-+
-+			phy1: ethernet-phy@1 {
-+				reg = <1>;
-+			};
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&led_pins_lamobo>;
-+
-+		green {
-+			label = "lamobo:green:usr";
-+			gpios = <&pio 7 24 0>;
-+			default-state = "on";
-+		};
-+	};
-+
-+	reg_ahci_5v: ahci-5v {
-+		status = "okay";
-+	};
-+
-+	reg_usb1_vbus: usb1-vbus {
-+		status = "okay";
-+	};
-+
-+	reg_usb2_vbus: usb2-vbus {
-+		status = "okay";
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&gmac_power_pin_lamobo>;
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 7 23 0>;
-+		status = "okay";
-+	};
-+};