sunxi: drop 3.14 support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44824

1 files changed, 0 insertions, 91 deletions

diff --git a/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch b/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch
deleted file mode 100644
index 4b19579346..0000000000
--- a/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 3e7fc7d394db0783996519f2d5affde5152a628e Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Thu, 26 Dec 2013 17:14:33 +0800
-Subject: [PATCH] ARM: dts: sun7i: add WiFi module to Cubietruck DTS
-
-The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi
-part is a BCM43362 IC connected to MMC2 in the A20 SoC via SDIO.
-The IC also takes a 32.768 KHz low power clock input, and a power
-enable signal via GPIO.
-
-The WiFi module supports out-of-band interrupt signaling via GPIO,
-but this is not supported in this patch.
----
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 47 ++++++++++++++++++++++++++++++
- 1 file changed, 47 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -28,6 +28,23 @@
- 			status = "okay";
- 		};
- 
-+		mmc3: mmc@01c12000 {
-+			pinctrl-names = "default", "default";
-+			pinctrl-0 = <&mmc3_pins_a>;
-+			pinctrl-1 = <&wifi_host_wake_pin>;
-+			vmmc-supply = <&reg_vmmc3>;
-+			non-removable;
-+			status = "okay";
-+
-+			brcmf: bcrmf@0 {
-+				/* out of band interrupt not working */
-+				/* compatible = "broadcom,bcm43362"; */
-+				interrupt-parent = <&pio>;
-+				interrupts = <10 2>; /* EINT10 */
-+				status = "okay";
-+			};
-+		};
-+
- 		usbphy: phy@01c13400 {
- 			usb1_vbus-supply = <&reg_usb1_vbus>;
- 			usb2_vbus-supply = <&reg_usb2_vbus>;
-@@ -56,6 +73,18 @@
- 		};
- 
- 		pinctrl@01c20800 {
-+			mmc3_pins_a: mmc3@0 {
-+				/* AP6210 requires pull-up */
-+				allwinner,pull = <1>;
-+			};
-+
-+			vmmc3_pin_cubietruck: vmmc3_pin@0 {
-+				allwinner,pins = "PH9";
-+				allwinner,function = "gpio_out";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <0>;
-+			};
-+
- 			ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
- 				allwinner,pins = "PH12";
- 				allwinner,function = "gpio_out";
-@@ -99,6 +128,13 @@
- 
- 				/include/ "x-powers-axp209.dtsi"
- 			};
-+
-+			wifi_host_wake_pin: wifi_host_wake_pin@0 {
-+				allwinner,pins = "PH10";
-+				allwinner,function = "gpio_in";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <0>;
-+			};
- 		};
- 
- 		i2c0: i2c@01c2ac00 {
-@@ -189,4 +225,15 @@
- 	reg_usb2_vbus: usb2-vbus {
- 		status = "okay";
- 	};
-+
-+	reg_vmmc3: vmmc3 {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vmmc3_pin_cubietruck>;
-+		regulator-name = "vmmc3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		enable-active-high;
-+		gpio = <&pio 7 9 0>;
-+	};
- };