sunxi: initial 3.13 support

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39471

1 files changed, 119 insertions, 0 deletions

diff --git a/target/linux/sunxi/patches-3.13/210-clk-sunxi-add-a20-output-clk.patch b/target/linux/sunxi/patches-3.13/210-clk-sunxi-add-a20-output-clk.patch
new file mode 100644
index 0000000000..5b46d8b127
--- /dev/null
+++ b/target/linux/sunxi/patches-3.13/210-clk-sunxi-add-a20-output-clk.patch
@@ -0,0 +1,119 @@
+From 5ca9eadcb5f5cd9af6f1650029ad64052a1a0b10 Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Tue, 24 Dec 2013 21:26:17 +0800
+Subject: [PATCH] clk: sunxi: Allwinner A20 output clock support
+
+This patch adds support for the external clock outputs on the
+Allwinner A20 SoC. The clock outputs are similar to "module 0"
+type clocks, with different offsets and widths for clock factors.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+---
+ Documentation/devicetree/bindings/clock/sunxi.txt |  1 +
+ drivers/clk/sunxi/clk-sunxi.c                     | 57 +++++++++++++++++++++++
+ 2 files changed, 58 insertions(+)
+
+diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
+index 941bd93..79c7197 100644
+--- a/Documentation/devicetree/bindings/clock/sunxi.txt
++++ b/Documentation/devicetree/bindings/clock/sunxi.txt
+@@ -36,6 +36,7 @@ Required properties:
+ 	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
+ 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
+ 	"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
++	"allwinner,sun7i-a20-out-clk" - for the external output clocks
+ 
+ Required properties for all clocks:
+ - reg : shall be the control register address for the clock.
+diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
+index 8a07a68..df1f385 100644
+--- a/drivers/clk/sunxi/clk-sunxi.c
++++ b/drivers/clk/sunxi/clk-sunxi.c
+@@ -396,6 +396,47 @@ void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output)
+ 
+ 
+ /**
++ * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B
++ * CLK_OUT rate is calculated as follows
++ * rate = (parent_rate >> p) / (m + 1);
++ */
++
++static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate,
++				      u8 *n, u8 *k, u8 *m, u8 *p)
++{
++	u8 div, calcm, calcp;
++
++	/* These clocks can only divide, so we will never be able to achieve
++	 * frequencies higher than the parent frequency */
++	if (*freq > parent_rate)
++		*freq = parent_rate;
++
++	div = parent_rate / *freq;
++
++	if (div < 32)
++		calcp = 0;
++	else if (div / 2 < 32)
++		calcp = 1;
++	else if (div / 4 < 32)
++		calcp = 2;
++	else
++		calcp = 3;
++
++	calcm = DIV_ROUND_UP(div, 1 << calcp);
++
++	*freq = (parent_rate >> calcp) / calcm;
++
++	/* we were called to round the frequency, we can now return */
++	if (n == NULL)
++		return;
++
++	*m = calcm - 1;
++	*p = calcp;
++}
++
++
++
++/**
+  * sunxi_factors_clk_setup() - Setup function for factor clocks
+  */
+ 
+@@ -455,6 +496,14 @@ struct factors_data {
+ 	.pwidth = 2,
+ };
+ 
++/* user manual says "n" but it's really "p" */
++static struct clk_factors_config sun7i_a20_out_config = {
++	.mshift = 8,
++	.mwidth = 5,
++	.pshift = 20,
++	.pwidth = 2,
++};
++
+ static const struct factors_data sun4i_pll1_data __initconst = {
+ 	.enable = 31,
+ 	.table = &sun4i_pll1_config,
+@@ -492,6 +541,13 @@ struct factors_data {
+ 	.getter = sun4i_get_mod0_factors,
+ };
+ 
++static const struct factors_data sun7i_a20_out_data __initconst = {
++	.enable = 31,
++	.mux = 24,
++	.table = &sun7i_a20_out_config,
++	.getter = sun7i_a20_get_out_factors,
++};
++
+ static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
+ 						const struct factors_data *data)
+ {
+@@ -995,6 +1051,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
+ 	{.compatible = "allwinner,sun5i-a13-ahb-clk", .data = &sun5i_a13_ahb_data,},
+ 	{.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
+ 	{.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},
++	{.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
+ 	{}
+ };
+ 
+-- 
+1.8.5.1
+