aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi/image
diff options
context:
space:
mode:
authorPetr Štetiar <ynezz@true.cz>2020-03-16 10:57:50 +0100
committerPetr Štetiar <ynezz@true.cz>2020-03-28 13:03:02 +0100
commit0784d07c11eb0eadf0d4426cc7dba3642ff5762c (patch)
treeab9025bc6aab725e5a7decce5ee43f656451e862 /target/linux/sunxi/image
parentc31954f1cf8760a873b6cabbcef271149958886d (diff)
downloadupstream-0784d07c11eb0eadf0d4426cc7dba3642ff5762c.tar.gz
upstream-0784d07c11eb0eadf0d4426cc7dba3642ff5762c.tar.bz2
upstream-0784d07c11eb0eadf0d4426cc7dba3642ff5762c.zip
sunxi: a53: add support for Olimex A64-Olinuxino eMMC
Specifications: SoC: Allwinner A64 (1.2 GHz Quad-Core ARM Cortex-A53 64-bit) RAM: 1GB or 2GB RAM DDR3L @ 672Mhz Flash: 0/4/16GB eMMC flash memory for storage and boot MicroSD card connector for cards up to 32GB Debug: serial UART debug header with 0.1" pins Wired connectivity: 10/100/1000Mbps GbE Ethernet Wireless connectivity: on-board RTL8723BS 1T1R 802.11bgn WiFi and Bluetooth 4.0 module with built-in antenna (only available in the A64-OLinuXino-1G4GW) Flashing instructions: Standard sunxi SD card installation procedure - copy eMMC image to SD card, insert in into SD card slot on the device and boot. You should see something like following if the eMMC is detected correctly: mmcblk2: mmc2:0001 P1XXXX 3.60 GiB mmcblk2boot0: mmc2:0001 P1XXXX partition 1 16.0 MiB mmcblk2boot1: mmc2:0001 P1XXXX partition 2 16.0 MiB Then flash SD card eMMC image straight into the mmcblk2 device: dd if=/mnt/openwrt...a64-olinuxino-emmc-squashfs-sdcard.img of=/dev/mmcblk2 It also possible to boot from boot0 partition[1]: 1. Compile U-Boot with CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x40 otherwise the U-Boot will get stuck in bootloop 2. Configure eMMC to boot from boot0 partition inside U-Boot: mmc bootbus 1 1 0 0; mmc partconf 1 1 1 0 3. echo 0 > /sys/block/mmcblk2boot0/force_ro 4. Write U-Boot from offset 0 (not offset 8k as with SD card) into boot0 partition dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk2boot0 Known issues: Wireless doesn't work properly via netifd. 1. https://linux-sunxi.org/index.php?title=Bootable_eMMC Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/sunxi/image')
-rw-r--r--target/linux/sunxi/image/cortex-a53.mk10
1 files changed, 10 insertions, 0 deletions
diff --git a/target/linux/sunxi/image/cortex-a53.mk b/target/linux/sunxi/image/cortex-a53.mk
index 96885cf926..7a70de4dff 100644
--- a/target/linux/sunxi/image/cortex-a53.mk
+++ b/target/linux/sunxi/image/cortex-a53.mk
@@ -47,6 +47,16 @@ define Device/olimex_a64-olinuxino
endef
TARGET_DEVICES += olimex_a64-olinuxino
+define Device/olimex_a64-olinuxino-emmc
+ DEVICE_VENDOR := Olimex
+ DEVICE_MODEL := A64-Olinuxino
+ DEVICE_VARIANT := eMMC
+ DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware
+ $(Device/sun50i-a64)
+ SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-olinuxino-emmc
+endef
+TARGET_DEVICES += olimex_a64-olinuxino-emmc
+
define Device/pine64_pine64-plus
DEVICE_VENDOR := Pine64
DEVICE_MODEL := Pine64+