glamo: Implement gpiolib for the glamo. Get rid of glamo-spi-gpio and use the generic spi-gpio driver instead.

SVN-Revision: 17048

10 files changed, 122 insertions, 480 deletions

diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02.h b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02.h
index d8d9d9053d..3d7606e9ba 100644
--- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02.h
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02.h
@@ -2,6 +2,7 @@
 #define _GTA02_H
 
 #include <mach/regs-gpio.h>
+#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 /* Different hardware revisions, passed in ATAG_REVISION by u-boot */
@@ -78,6 +79,9 @@
 #define GTA02_PCB_ID2_0		S3C2410_GPD3
 #define GTA02_PCB_ID2_1		S3C2410_GPD4
 
+#define GTA02_GPIO_GLAMO_BASE S3C_GPIO_END
+#define GTA02_GPIO_GLAMO(x) (GTA02_GPIO_GLAMO_BASE + x)
+
 int gta02_get_pcb_revision(void);
 
 extern struct pcf50633 *gta02_pcf;
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c
index 64b6b0d2ee..30405ad80c 100644
--- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c
@@ -35,6 +35,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/mmc/host.h>
 
@@ -74,7 +75,6 @@
 #include <mach/spi.h>
 #include <mach/spi-gpio.h>
 #include <mach/regs-mem.h>
-#include <mach/spi-gpio.h>
 #include <plat/pwm.h>
 #include <mach/cpu.h>
 
@@ -97,7 +97,6 @@
 #include <linux/jbt6k74.h>
 #include <linux/glamofb.h>
 #include <linux/mfd/glamo.h>
-#include <linux/spi/glamo.h>
 
 #include <linux/hdq.h>
 #include <linux/bq27000_battery.h>
@@ -1081,7 +1080,7 @@ static struct platform_device gta02_bl_dev = {
 
 static void gta02_jbt6k74_reset(int devidx, int level)
 {
-	glamo_lcm_reset(&gta02_glamo_dev, level);
+    gpio_set_value(GTA02_GPIO_GLAMO(4), level);
 }
 
 static void gta02_jbt6k74_probe_completed(struct device *dev)
@@ -1160,13 +1159,12 @@ struct lis302dl_platform_data lis302_pdata_bottom = {
 static struct spi_board_info gta02_spi_board_info[] = {
 	{
 		.modalias	= "jbt6k74",
-		/* platform_data */
 		.platform_data	= &jbt6k74_pdata,
-		/* controller_data */
+		.controller_data = (void*)GTA02_GPIO_GLAMO(12),
 		/* irq */
 		.max_speed_hz	= 100 * 1000,
 		.bus_num	= 2,
-		/* chip_select */
+		.chip_select = 0
 	},
 	{
 		.modalias	= "lis302dl",
@@ -1363,6 +1361,35 @@ static void gta02_glamo_external_reset(int level)
 	s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT);
 }
 
+/*
+static struct fb_videomode gta02_glamo_modes[] = {
+	{
+		.name = "480x640",
+		.xres = 480,
+		.yres = 640,
+		.pixclock	= 40816,
+		.left_margin	= 8,
+		.right_margin	= 63,
+		.upper_margin	= 2,
+		.lower_margin	= 4,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.vmode = FB_VMODE_NONINTERLACED,
+	}, {
+		.name = "240x320",
+		.xres = 240,
+		.yres = 320,
+		.pixclock	= 40816,
+		.left_margin	= 8,
+		.right_margin	= 88,
+		.upper_margin	= 2,
+		.lower_margin	= 2,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.vmode = FB_VMODE_NONINTERLACED,
+	}
+};*/
+
 static struct fb_videomode gta02_glamo_modes[] = {
 	{
 		.name = "480x640",
@@ -1391,6 +1418,7 @@ static struct fb_videomode gta02_glamo_modes[] = {
 	}
 };
 
+
 static struct glamo_fb_platform_data gta02_glamo_fb_pdata = {
 	.width  = 43,
 	.height = 58,
@@ -1399,22 +1427,14 @@ static struct glamo_fb_platform_data gta02_glamo_fb_pdata = {
 	.modes = gta02_glamo_modes,
 };
 
-static struct glamo_spigpio_platform_data gta02_glamo_spigpio_pdata = {
-	.pin_clk  = GLAMO_GPIO10_OUTPUT,
-	.pin_mosi = GLAMO_GPIO11_OUTPUT,
-	.pin_cs	  = GLAMO_GPIO12_OUTPUT,
-	.pin_miso = 0,
-	.bus_num  = 2,
-};
-
 static struct glamo_mmc_platform_data gta02_glamo_mmc_pdata = {
 	.glamo_mmc_use_slow = gta02_glamo_mci_use_slow,
 };
 
 static struct glamo_platform_data gta02_glamo_pdata = {
-	.fb_data      = &gta02_glamo_fb_pdata,
-	.spigpio_data = &gta02_glamo_spigpio_pdata,
-	.mmc_data     = &gta02_glamo_mmc_pdata,
+	.fb_data   = &gta02_glamo_fb_pdata,
+	.mmc_data  = &gta02_glamo_mmc_pdata,
+    .gpio_base = GTA02_GPIO_GLAMO_BASE,
 
     .osci_clock_rate = 32768,
 
@@ -1472,6 +1492,22 @@ static void mangle_glamo_res_by_system_rev(void)
 	}
 }
 
+struct spi_gpio_platform_data spigpio_platform_data = {
+	.sck = GTA02_GPIO_GLAMO(10),
+	.mosi = GTA02_GPIO_GLAMO(11),
+	.miso = GTA02_GPIO_GLAMO(5),
+	.num_chipselect = 1,
+};
+
+static struct platform_device spigpio_device = {
+	.name = "spi_gpio",
+    .id   = 2,
+	.dev = {
+		.platform_data = &spigpio_platform_data,
+        .parent        = &gta02_glamo_dev.dev,
+	},
+};
+
 static void __init gta02_map_io(void)
 {
 	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
@@ -1519,7 +1555,6 @@ static struct platform_device *gta02_devices[] __initdata = {
 	&s3c24xx_pwm_device,
 	&gta02_led_dev,
 	&gta02_pm_wlan_dev, /* not dependent on PMU */
-
 	&s3c_device_iis,
 	&s3c_device_i2c0,
 };
@@ -1535,6 +1570,15 @@ static struct platform_device *gta02_devices_pmu_children[] = {
 	&gta02_resume_reason_device,
 };
 
+static void gta02_register_glamo() {
+	platform_device_register(&gta02_glamo_dev);
+    if (!gpio_request(GTA02_GPIO_GLAMO(4), "jbt6k74 reset"))
+        printk("gta02: Failed to request jbt6k74 reset pin\n");
+    if (!gpio_direction_output(GTA02_GPIO_GLAMO(4), 1))
+        printk("gta02: Failed to configure jbt6k74 reset pin\n");
+	platform_device_register(&spigpio_device);
+}
+
 static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id)
 {
 	struct platform_device *regulator, *pdev;
@@ -1551,8 +1595,8 @@ static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id)
 			pdev = &gta02_pm_gps_dev;
 			break;
 		case PCF50633_REGULATOR_HCLDO:
-			pdev = &gta02_glamo_dev;
-			break;
+            gta02_register_glamo();
+            return;
 		default:
 			return;
 	}
@@ -1628,10 +1672,11 @@ static void __init gta02_machine_init(void)
 	s3c2410_gpio_setpin(S3C2410_GPD13, 1);
 	s3c2410_gpio_cfgpin(S3C2410_GPD13, S3C2410_GPIO_OUTPUT);
 
+
 	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 	set_s3c2410ts_info(&gta02_ts_cfg);
-	
+
 	mangle_glamo_res_by_system_rev();
 
 	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig
index 8de1c2f39d..8c93bcbdb4 100644
--- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig
@@ -23,23 +23,12 @@ config MFD_GLAMO_FB
 
 	  If unsure, say N.
 
-config MFD_GLAMO_FB_XGLAMO_WORKAROUND
-	bool "Smedia Glamo 336x/337x Xglamo rotation workaround"
-	depends on MFD_GLAMO_FB
-	help
-	  This is a workaround for a Xglamo bug. This should be fixed
-	  in Xglamo and not in kernel space.
-
-	  If unsure, say N.
-
-
-config MFD_GLAMO_SPI_GPIO
-	tristate "Glamo GPIO SPI bitbang support"
+config MFD_GLAMO_GPIO
+	tristate "Glamo GPIO support"
 	depends on MFD_GLAMO
-	select SPI_BITBANG
 
 	help
-          Enable a bitbanging SPI adapter driver for the Smedia Glamo.
+		Enable a bitbanging SPI adapter driver for the Smedia Glamo.
 
 config MFD_GLAMO_MCI
 	tristate "Glamo S3C SD/MMC Card Interface support"
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile
index 99a927a5bf..ebf26f7e47 100644
--- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile
@@ -2,9 +2,9 @@
 # Makefile for the Smedia Glamo framebuffer driver
 #
 
-obj-$(CONFIG_MFD_GLAMO)			+= glamo-core.o glamo-gpio.o
+obj-$(CONFIG_MFD_GLAMO)			+= glamo-core.o
+obj-$(CONFIG_MFD_GLAMO_GPIO)		+= glamo-gpio.o
 obj-$(CONFIG_MFD_GLAMO_SPI)		+= glamo-spi.o
-obj-$(CONFIG_MFD_GLAMO_SPI_GPIO) 	+= glamo-spi-gpio.o
 
 obj-$(CONFIG_MFD_GLAMO_FB)		+= glamo-fb.o
 obj-$(CONFIG_MFD_GLAMO_MCI)		+= glamo-mci.o
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c
index 0c6fc58130..077a7a839c 100644
--- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c
@@ -89,9 +89,9 @@ struct reg_range reg_range[] = {
 /*		{ 0x1500, 0x080,	"MPU 0",	0 },
 	{ 0x1580, 0x080,	"MPU 1",	0 },
 	{ 0x1600, 0x080,	"Cmd Queue",	0 },
-	{ 0x1680, 0x080,	"RISC CPU",	0 },
+	{ 0x1680, 0x080,	"RISC CPU",	0 },*/
 	{ 0x1700, 0x400,	"2D Unit",	0 },
-	{ 0x1b00, 0x900,	"3D Unit",	0 }, */
+/*	{ 0x1b00, 0x900,	"3D Unit",	0 }, */
 };
 
 static inline void __reg_write(struct glamo_core *glamo,
@@ -179,7 +179,7 @@ static struct resource glamo_mmc_resources[] = {
 enum glamo_cells {
 	GLAMO_CELL_FB,
 	GLAMO_CELL_MMC,
-	GLAMO_CELL_SPI_GPIO
+	GLAMO_CELL_GPIO,
 };
 
 static struct mfd_cell glamo_cells[] = {
@@ -193,8 +193,8 @@ static struct mfd_cell glamo_cells[] = {
 		.num_resources = ARRAY_SIZE(glamo_mmc_resources),
 		.resources = glamo_mmc_resources,
 	},
-	[GLAMO_CELL_SPI_GPIO] = {
-		.name = "glamo-spi-gpio",
+	[GLAMO_CELL_GPIO] = {
+		.name = "glamo-gpio",
 	},
 };
 
@@ -381,7 +381,8 @@ int __glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
 				   GLAMO_CLOCK_MMC_EN_M9CLK |
 				   GLAMO_CLOCK_MMC_EN_TCLK |
 				   GLAMO_CLOCK_MMC_DG_M9CLK |
-				   GLAMO_CLOCK_MMC_DG_TCLK, 0xffff);
+				   GLAMO_CLOCK_MMC_DG_TCLK,
+				   0xffff);
 		/* enable the TCLK divider clk input */
 		__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
 						 GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
@@ -604,8 +605,8 @@ static const struct glamo_script reset_regs[] = {
 
 void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine)
 {
-    uint16_t reg = reset_regs[engine].reg;
-    uint16_t val = reset_regs[engine].val;
+	uint16_t reg = reset_regs[engine].reg;
+	uint16_t val = reset_regs[engine].val;
 
 	if (engine >= ARRAY_SIZE(reset_regs)) {
 		dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine);
@@ -620,17 +621,6 @@ void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine)
 }
 EXPORT_SYMBOL_GPL(glamo_engine_reset);
 
-void glamo_lcm_reset(struct platform_device *pdev, int level)
-{
-	struct glamo_core *glamo = dev_get_drvdata(&pdev->dev);
-	if (!glamo)
-		return;
-
-	glamo_gpio_setpin(glamo, GLAMO_GPIO4, level);
-	glamo_gpio_cfgpin(glamo, GLAMO_GPIO4_OUTPUT);
-}
-EXPORT_SYMBOL_GPL(glamo_lcm_reset);
-
 int glamo_pll_rate(struct glamo_core *glamo,
 			  enum glamo_pll pll)
 {
@@ -707,10 +697,9 @@ int glamo_run_script(struct glamo_core *glamo, const struct glamo_script *script
 		     int len, int may_sleep)
 {
 	int i;
+    const struct glamo_script *line = script;
 
-	for (i = 0; i < len; i++) {
-		struct glamo_script *line = &script[i];
-
+	for (i = 0; i < len; ++i, ++line) {
 		switch (line->reg) {
 		case 0xffff:
 			return 0;
@@ -859,11 +848,6 @@ static const struct glamo_script glamo_init_script[] = {
 	{ GLAMO_REG_MEM_DRAM1,		0xe100 },
 	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
 	{ GLAMO_REG_CLOCK_MEMORY,	0x000b },
-	{ GLAMO_REG_GPIO_GEN1,		0x000f },
-	{ GLAMO_REG_GPIO_GEN2,		0x111e },
-	{ GLAMO_REG_GPIO_GEN3,		0xccc3 },
-	{ GLAMO_REG_GPIO_GEN4,		0x111e },
-	{ GLAMO_REG_GPIO_GEN5,		0x000f },
 };
 #if 0
 static struct glamo_script glamo_resume_script[] = {
@@ -1214,12 +1198,6 @@ static int __init glamo_probe(struct platform_device *pdev)
 	glamo_cells[GLAMO_CELL_FB].platform_data = glamo->pdata->fb_data;
 	glamo_cells[GLAMO_CELL_FB].data_size = sizeof(struct glamo_fb_platform_data);
 
-	glamo->pdata->spigpio_data->core = glamo;
-	glamo_cells[GLAMO_CELL_SPI_GPIO].platform_data =
-		glamo->pdata->spigpio_data;
-	glamo_cells[GLAMO_CELL_SPI_GPIO].data_size =
-		sizeof(struct glamo_spigpio_platform_data);
-
 	mfd_add_devices(&pdev->dev, pdev->id, glamo_cells,
 	                      ARRAY_SIZE(glamo_cells),
 						  glamo->mem, 0);
@@ -1293,7 +1271,6 @@ static int glamo_resume(struct device *dev)
 	struct glamo_core *glamo = dev_get_drvdata(dev);
 	glamo_power(glamo, GLAMO_POWER_ON);
 	glamo->suspending = 0;
-
 	return 0;
 }
 
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-spi-gpio.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-spi-gpio.c
deleted file mode 100644
index 6316b85d0c..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-spi-gpio.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * Copyright (C) 2007 Openmoko, Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- *
- * Smedia Glamo GPIO based SPI driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver currently only implements a minimum subset of the hardware
- * features, esp. those features that are required to drive the jbt6k74
- * LCM controller asic in the TD028TTEC1 LCM.
- *
-*/
-
-#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <linux/spi/glamo.h>
-
-#include <linux/glamofb.h>
-
-#include <mach/hardware.h>
-
-#include "glamo-core.h"
-#include "glamo-regs.h"
-
-struct glamo_spigpio {
-	struct spi_bitbang		bitbang;
-	struct spi_master		*master;
-	struct glamo_spigpio_platform_data	*info;
-};
-
-static inline struct glamo_spigpio *to_sg(struct spi_device *spi)
-{
-	return dev_get_drvdata(&spi->master->dev);
-}
-
-static inline void setsck(struct spi_device *dev, int on)
-{
-	struct glamo_spigpio *sg = to_sg(dev);
-	glamo_gpio_setpin(sg->info->core, sg->info->pin_clk, on ? 1 : 0);
-}
-
-static inline void setmosi(struct spi_device *dev, int on)
-{
-	struct glamo_spigpio *sg = to_sg(dev);
-	glamo_gpio_setpin(sg->info->core, sg->info->pin_mosi, on ? 1 : 0);
-}
-
-static inline u32 getmiso(struct spi_device *dev)
-{
-	struct glamo_spigpio *sg = to_sg(dev);
-	if (sg->info->pin_miso)
-		return glamo_gpio_getpin(sg->info->core, sg->info->pin_miso) ? 1 : 0;
-	else
-		return 0;
-}
-
-#define spidelay(x) ndelay(x)
-
-#define EXPAND_BITBANG_TXRX
-#include <linux/spi/spi_bitbang.h>
-
-static u32 glamo_spigpio_txrx_mode0(struct spi_device *spi,
-				    unsigned nsecs, u32 word, u8 bits)
-{
-	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
-}
-
-static u32 glamo_spigpio_txrx_mode1(struct spi_device *spi,
-				    unsigned nsecs, u32 word, u8 bits)
-{
-	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
-}
-
-static u32 glamo_spigpio_txrx_mode2(struct spi_device *spi,
-				    unsigned nsecs, u32 word, u8 bits)
-{
-	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
-}
-
-static u32 glamo_spigpio_txrx_mode3(struct spi_device *spi,
-				    unsigned nsecs, u32 word, u8 bits)
-{
-	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
-}
-
-
-#if 0
-static int glamo_spigpio_setupxfer(struct spi_device *spi,
-				   struct spi_transfer *t)
-{
-	struct glamo_spi *gs = to_sg(spi);
-	unsigned int bpw;
-
-	bpw = t ? t->bits_per_word : spi->bits_per_word;
-
-	if (bpw != 9 && bpw != 8) {
-		dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-#endif
-
-static void glamo_spigpio_chipsel(struct spi_device *spi, int value)
-{
-	struct glamo_spigpio *gs = to_sg(spi);
-#if 0
-	dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n",
-		value, spi, gs, gs->info, gs->info->glamo);
-#endif
-	glamo_gpio_setpin(gs->info->core, gs->info->pin_cs, value ? 0 : 1);
-}
-
-
-static int glamo_spigpio_probe(struct platform_device *pdev)
-{
-	struct spi_master *master;
-	struct glamo_spigpio *sp;
-	int ret;
-
-	master = spi_alloc_master(&pdev->dev, sizeof(struct glamo_spigpio));
-	if (master == NULL) {
-		dev_err(&pdev->dev, "failed to allocate spi master\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	sp = spi_master_get_devdata(master);
-	platform_set_drvdata(pdev, sp);
-	sp->info = pdev->dev.platform_data;
-	if (!sp->info) {
-		dev_err(&pdev->dev, "can't operate without platform data\n");
-		ret = -EIO;
-		goto err_no_pdev;
-	}
-
-	master->num_chipselect = 1;
-	master->bus_num = 2; /* FIXME: use dynamic number */
-
-	sp->master = spi_master_get(master);
-
-	sp->bitbang.master = sp->master;
-	sp->bitbang.chipselect = glamo_spigpio_chipsel;
-	sp->bitbang.txrx_word[SPI_MODE_0] = glamo_spigpio_txrx_mode0;
-	sp->bitbang.txrx_word[SPI_MODE_1] = glamo_spigpio_txrx_mode1;
-	sp->bitbang.txrx_word[SPI_MODE_2] = glamo_spigpio_txrx_mode2;
-	sp->bitbang.txrx_word[SPI_MODE_3] = glamo_spigpio_txrx_mode3;
-
-	/* set state of spi pins */
-	glamo_gpio_setpin(sp->info->core, sp->info->pin_clk, 0);
-	glamo_gpio_setpin(sp->info->core, sp->info->pin_mosi, 0);
-	glamo_gpio_setpin(sp->info->core, sp->info->pin_cs, 1);
-
-	glamo_gpio_cfgpin(sp->info->core, sp->info->pin_clk);
-	glamo_gpio_cfgpin(sp->info->core, sp->info->pin_mosi);
-	glamo_gpio_cfgpin(sp->info->core, sp->info->pin_cs);
-	if (sp->info->pin_miso)
-		glamo_gpio_cfgpin(sp->info->core, sp->info->pin_miso);
-
-	/* bring the LCM panel out of reset if it isn't already */
-
-	glamo_gpio_setpin(sp->info->core, GLAMO_GPIO4, 1);
-	glamo_gpio_cfgpin(sp->info->core, GLAMO_GPIO4_OUTPUT);
-	msleep(90);
-
-#if 0
-	sp->dev = &pdev->dev;
-
-	sp->bitbang.setup_transfer = glamo_spi_setupxfer;
-	sp->bitbang.txrx_bufs = glamo_spi_txrx;
-	sp->bitbang.master->setup = glamo_spi_setup;
-#endif
-
-	dev_set_drvdata(&sp->master->dev, sp);
-
-	ret = spi_bitbang_start(&sp->bitbang);
-	if (ret)
-		goto err_no_bitbang;
-
-	return 0;
-
-err_no_bitbang:
-	platform_set_drvdata(pdev, NULL);
-err_no_pdev:
-	spi_master_put(sp->bitbang.master);
-err:
-	return ret;
-
-}
-
-static int glamo_spigpio_remove(struct platform_device *pdev)
-{
-	struct glamo_spigpio *sp = platform_get_drvdata(pdev);
-
-	spi_bitbang_stop(&sp->bitbang);
-	spi_master_put(sp->bitbang.master);
-
-	return 0;
-}
-
-
-#ifdef CONFIG_PM
-/*static int glamo_spigpio_suspend(struct device *dev)
-{
-	return 0;
-}*/
-
-static int glamo_spigpio_resume(struct device *dev)
-{
-	struct glamo_spigpio *sp = dev_get_drvdata(dev);
-
-	if (!sp)
-		return 0;
-
-	/* set state of spi pins */
-	glamo_gpio_setpin(sp->info->core, sp->info->pin_clk, 0);
-	glamo_gpio_setpin(sp->info->core, sp->info->pin_mosi, 0);
-	glamo_gpio_setpin(sp->info->core, sp->info->pin_cs, 1);
-
-	glamo_gpio_cfgpin(sp->info->core, sp->info->pin_clk);
-	glamo_gpio_cfgpin(sp->info->core, sp->info->pin_mosi);
-	glamo_gpio_cfgpin(sp->info->core, sp->info->pin_cs);
-	if (sp->info->pin_miso)
-		glamo_gpio_cfgpin(sp->info->core, sp->info->pin_miso);
-
-	return 0;
-}
-
-static struct dev_pm_ops glamo_spigpio_pm_ops = {
-/*	.suspend = glamo_spiogpio_suspend,*/
-	.resume_noirq = glamo_spigpio_resume,
-};
-
-#define GLAMO_SPIGPIO_PM_OPS (&glamo_spigpio_pm_ops)
-
-#else
-#define GLAMO_SPIGPIO_PM_OPS NULL
-#endif
-
-static struct platform_driver glamo_spi_drv = {
-	.probe		= glamo_spigpio_probe,
-	.remove		= glamo_spigpio_remove,
-	.driver		= {
-		.name	= "glamo-spi-gpio",
-		.owner	= THIS_MODULE,
-		.pm     = GLAMO_SPIGPIO_PM_OPS,
-	},
-};
-
-static int __init glamo_spi_init(void)
-{
-	return platform_driver_register(&glamo_spi_drv);
-}
-
-static void __exit glamo_spi_exit(void)
-{
-	platform_driver_unregister(&glamo_spi_drv);
-}
-
-module_init(glamo_spi_init);
-module_exit(glamo_spi_exit);
-
-MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver");
-MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>")
-MODULE_LICENSE("GPL");
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/glamo-gpio.h b/target/linux/s3c24xx/files-2.6.30/include/linux/glamo-gpio.h
deleted file mode 100644
index d00f7e95a2..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/include/linux/glamo-gpio.h
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifndef __GLAMO_GPIO_H
-#define __GLAMO_GPIO_H
-
-struct glamo_core;
-
-#define GLAMO_GPIO_BANKA	0x0000
-#define GLAMO_GPIO_BANKB	0x1000
-#define GLAMO_GPIO_BANKC	0x2000
-#define GLAMO_GPIO_BANKD	0x3000
-
-#define GLAMO_GPIONO(bank, pin)	((bank & 0xf000) | ((pin & 0xf) << 8))
-
-#define GLAMO_GPIO_F_IN		0x0010
-#define GLAMO_GPIO_F_OUT	0x0020
-#define GLAMO_GPIO_F_FUNC	0x0030
-
-#define GLAMO_GPIO0		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 0)
-#define GLAMO_GPIO0_INPUT	(GLAMO_GPIO0 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO0_OUTPUT	(GLAMO_GPIO0 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO0_HA20	(GLAMO_GPIO0 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO1		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 1)
-#define GLAMO_GPIO1_INPUT	(GLAMO_GPIO1 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO1_OUTPUT	(GLAMO_GPIO1 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO1_HA21	(GLAMO_GPIO1 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO2		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 2)
-#define GLAMO_GPIO2_INPUT	(GLAMO_GPIO2 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO2_OUTPUT	(GLAMO_GPIO2 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO2_HA22	(GLAMO_GPIO2 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO3		GLAMO_GPIONO(GLAMO_GPIO_BANKA, 3)
-#define GLAMO_GPIO3_INPUT	(GLAMO_GPIO3 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO3_OUTPUT	(GLAMO_GPIO3 | GLAMO_GPIO_F_OUT)
-#define	GLAMO_GPIO3_HA23	(GLAMO_GPIO3 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO4		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 0)
-#define GLAMO_GPIO4_INPUT	(GLAMO_GPIO4 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO4_OUTPUT	(GLAMO_GPIO4 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO4_nLCS0	(GLAMO_GPIO4 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO5		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 1)
-#define GLAMO_GPIO5_INPUT	(GLAMO_GPIO5 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO5_OUTPUT	(GLAMO_GPIO5 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO5_nLCS1	(GLAMO_GPIO5 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO6		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 2)
-#define GLAMO_GPIO6_INPUT	(GLAMO_GPIO6 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO6_OUTPUT	(GLAMO_GPIO6 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO6_LDCLK	(GLAMO_GPIO6 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO7		GLAMO_GPIONO(GLAMO_GPIO_BANKB, 3)
-#define GLAMO_GPIO7_INPUT	(GLAMO_GPIO7 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO7_OUTPUT	(GLAMO_GPIO7 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO7_nLDE	(GLAMO_GPIO7 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO8		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 0)
-#define GLAMO_GPIO8_INPUT	(GLAMO_GPIO8 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO8_OUTPUT	(GLAMO_GPIO8 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO8_LD16	(GLAMO_GPIO8 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO9		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 1)
-#define GLAMO_GPIO9_INPUT	(GLAMO_GPIO9 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO9_OUTPUT	(GLAMO_GPIO9 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO9_LD17	(GLAMO_GPIO9 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO10		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 2)
-#define GLAMO_GPIO10_INPUT	(GLAMO_GPIO10 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO10_OUTPUT	(GLAMO_GPIO10 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO10_LSCK	(GLAMO_GPIO10 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO11		GLAMO_GPIONO(GLAMO_GPIO_BANKC, 3)
-#define GLAMO_GPIO11_INPUT	(GLAMO_GPIO11 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO11_OUTPUT	(GLAMO_GPIO11 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO11_LSDA	(GLAMO_GPIO11 | GLAMO_GPIO_F_FUNC)
-
-#define GLAMO_GPIO12		GLAMO_GPIONO(GLAMO_GPIO_BANKD, 0)
-#define GLAMO_GPIO12_INPUT	(GLAMO_GPIO12 | GLAMO_GPIO_F_IN)
-#define GLAMO_GPIO12_OUTPUT	(GLAMO_GPIO12 | GLAMO_GPIO_F_OUT)
-#define GLAMO_GPIO12_LSA0	(GLAMO_GPIO12 | GLAMO_GPIO_F_FUNC)
-
-
-#define REG_OF_GPIO(gpio)	(((gpio & 0xf000) >> 12)*2 \
-						+ GLAMO_REG_GPIO_GEN1)
-#define NUM_OF_GPIO(gpio)	((gpio & 0x0f00) >> 8)
-#define GPIO_OUT_BIT(gpio)	(1 << (NUM_OF_GPIO(gpio) + 0))
-#define OUTPUT_BIT(gpio)	(1 << (NUM_OF_GPIO(gpio) + 4))
-#define INPUT_BIT(gpio)		(1 << (NUM_OF_GPIO(gpio) + 8))
-#define FUNC_BIT(gpio)		(1 << (NUM_OF_GPIO(gpio) + 12))
-
-void glamo_gpio_setpin(struct glamo_core *glamo, unsigned int pin,
-		       unsigned int value);
-
-int glamo_gpio_getpin(struct glamo_core *glamo, unsigned int pin);
-
-void glamo_gpio_cfgpin(struct glamo_core *glamo, unsigned int pinfunc);
-
-
-#endif /* _GLAMO_GPIO */
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/mfd/glamo.h b/target/linux/s3c24xx/files-2.6.30/include/linux/mfd/glamo.h
index 47d9fd257e..af9688ba37 100644
--- a/target/linux/s3c24xx/files-2.6.30/include/linux/mfd/glamo.h
+++ b/target/linux/s3c24xx/files-2.6.30/include/linux/mfd/glamo.h
@@ -15,6 +15,7 @@ struct glamo_platform_data {
     struct glamo_fb_platform_data      *fb_data;
     struct glamo_spigpio_platform_data *spigpio_data;
     struct glamo_mmc_platform_data     *mmc_data;
+    int gpio_base;
 
     unsigned int osci_clock_rate;
 
diff --git a/target/linux/s3c24xx/files-2.6.30/include/linux/spi/glamo.h b/target/linux/s3c24xx/files-2.6.30/include/linux/spi/glamo.h
deleted file mode 100644
index cef9bcb67c..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/include/linux/spi/glamo.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __GLAMO_SPI_H
-#define __GLAMO_SPI_H
-
-#include <linux/glamo-gpio.h>
-
-struct glamo_core;
-
-struct glamo_spigpio_platform_data {
-	unsigned int pin_clk;
-	unsigned int pin_mosi;
-	unsigned int pin_miso;
-	unsigned int pin_cs;
-	int          bus_num;
-
-	struct glamo_core *core;
-};
-
-
-#endif
diff --git a/target/linux/s3c24xx/files-2.6.30/sound/soc/s3c24xx/gta02_wm8753.c b/target/linux/s3c24xx/files-2.6.30/sound/soc/s3c24xx/gta02_wm8753.c
index 1f8f9db9b0..5f9ea7e424 100644
--- a/target/linux/s3c24xx/files-2.6.30/sound/soc/s3c24xx/gta02_wm8753.c
+++ b/target/linux/s3c24xx/files-2.6.30/sound/soc/s3c24xx/gta02_wm8753.c
@@ -18,6 +18,7 @@
 #include <linux/timer.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
@@ -28,8 +29,6 @@
 #include <plat/regs-iis.h>
 
 #include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
 #include <asm/io.h>
 #include <mach/regs-gpioj.h>
 #include <mach/gta02.h>
@@ -243,10 +242,10 @@ static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
 
 	if (val) {
 		lm4853_state |= LM4853_SPK;
-		s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 0);
+		gpio_set_value(GTA02_GPIO_HP_IN, 0);
 	} else {
 		lm4853_state &= ~LM4853_SPK;
-		s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 1);
+		gpio_set_value(GTA02_GPIO_HP_IN, 1);
 	}
 
 	return 0;
@@ -265,10 +264,10 @@ static int lm4853_event(struct snd_soc_dapm_widget *w,
 			int event)
 {
 	if (SND_SOC_DAPM_EVENT_ON(event))
-		s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 0);
+		gpio_set_value(GTA02_GPIO_AMP_SHUT, 0);
 
 	if (SND_SOC_DAPM_EVENT_OFF(event))
-		s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 1);
+		gpio_set_value(GTA02_GPIO_AMP_SHUT, 1);
 
 	return 0;
 }
@@ -449,19 +448,40 @@ static int __init neo1973_gta02_init(void)
 
 	if (ret) {
 		platform_device_put(neo1973_gta02_snd_device);
-		return ret;
+		return 0;
 	}
 
 	/* Initialise GPIOs used by amp */
-	s3c2410_gpio_cfgpin(GTA02_GPIO_HP_IN, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(GTA02_GPIO_AMP_SHUT, S3C2410_GPIO_OUTPUT);
+	ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN");
+	if (ret) {
+		pr_err("%s: Failed to register GPIO %d\n", __func__, GTA02_GPIO_HP_IN);
+		goto err_unregister_device;
+	}
 
-	/* Amp off by default */
-	s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 1);
+	ret = gpio_direction_output(GTA02_GPIO_HP_IN, 1);
+	if (ret) {
+		pr_err("%s: Failed to configure GPIO %d\n", __func__, GTA02_GPIO_HP_IN);
+		goto err_unregister_device;
+	}
 
-	/* Speaker off by default */
-	s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 1);
+	ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT");
+	if (ret) {
+		pr_err("%s: Failed to register GPIO %d\n", __func__, GTA02_GPIO_AMP_SHUT);
+		goto err_free_gpio_hp_in;
+	}
 
+	ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1);
+	if (ret) {
+		pr_err("%s: Failed to configure GPIO %d\n", __func__, GTA02_GPIO_AMP_SHUT);
+		goto err_free_gpio_hp_in;
+	}
+
+
+	return 0;
+err_free_gpio_hp_in:
+	gpio_free(GTA02_GPIO_HP_IN);
+err_unregister_device:
+	platform_device_unregister(neo1973_gta02_snd_device);
 	return ret;
 }
 module_init(neo1973_gta02_init);
@@ -470,6 +490,8 @@ static void __exit neo1973_gta02_exit(void)
 {
 	snd_soc_unregister_dai(&bt_dai);
 	platform_device_unregister(neo1973_gta02_snd_device);
+	gpio_free(GTA02_GPIO_HP_IN);
+	gpio_free(GTA02_GPIO_AMP_SHUT);
 }
 module_exit(neo1973_gta02_exit);