nuke obsolete kernel stuff

SVN-Revision: 14875

1 files changed, 0 insertions, 234 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.26/1177-fix-pcf50633-disable-irq-from-suspend-until-resume.p.patch b/target/linux/s3c24xx/patches-2.6.26/1177-fix-pcf50633-disable-irq-from-suspend-until-resume.p.patch
deleted file mode 100755
index daeb1bf36b..0000000000
--- a/target/linux/s3c24xx/patches-2.6.26/1177-fix-pcf50633-disable-irq-from-suspend-until-resume.p.patch
+++ /dev/null
@@ -1,234 +0,0 @@
-From e9c3ab43aecc2b4b0024bda7799987fd77a08fcb Mon Sep 17 00:00:00 2001
-From: Andy Green <andy@openmoko.com>
-Date: Fri, 25 Jul 2008 23:06:15 +0100
-Subject: [PATCH] fix-pcf50633-disable-irq-from-suspend-until-resume.patch
-
-Disable pcf interrupt (not for wake, just as interrupt) in
-suspend, re-enable it again just before we force-call the
-workqueue function at end of pcf resume, which leads to
-pcf interrupt source registers getting cleared so it can
-signal an interrupt normally again.
-
-This change ends the uncontrolled appearance of pcf interrupts
-during resume time which previously caused the work to attempt
-to use the I2C stuff before i2c host device had itself resumed.
-Now the isr work is only queued, and the isr work function called,
-definitively after pcf resume completes.
-
-In suspend time, the work function may have been queued some
-time before and be pending, and it could still show up at a
-bad time.  Therefore if the work function sees that it is
-coming since the start of pcf50633 suspend function, it
-aborts without attempting to read the pcf interrupt regs,
-leaving them for resume to take care of.
-
-USB current limit and no battery work functions are also made
-aware of suspend state and act accordingly.
-
-Lastly I noticed that in early resume, i2c_get_clientdata(&pcf->client)
-returns NULL, presumably because i2c device is still suspended.  This
-could easily make trouble for async events like interrupt work,
-since pcf pointer is the client data.  Disabling appearance of the
-work until after pcf50633 resume will also avoid that.
-
-Signed-off-by: Andy Green <andy@openmoko.com>
----
- drivers/i2c/chips/pcf50633.c |   89 +++++++++++++++++++++++++++++------------
- 1 files changed, 63 insertions(+), 26 deletions(-)
-
-diff --git a/drivers/i2c/chips/pcf50633.c b/drivers/i2c/chips/pcf50633.c
-index 87a3003..33c4ef4 100644
---- a/drivers/i2c/chips/pcf50633.c
-+++ b/drivers/i2c/chips/pcf50633.c
-@@ -632,6 +632,11 @@ static void pcf50633_work_usbcurlim(struct work_struct *work)
- 
- 	mutex_lock(&pcf->working_lock_usb_curlimit);
- 
-+	/* just can't cope with it if we are suspending, don't reschedule */
-+	if ((pcf->suspend_state == PCF50633_SS_STARTING_SUSPEND) ||
-+	    (pcf->suspend_state == PCF50633_SS_COMPLETED_SUSPEND))
-+		goto bail;
-+
- 	dev_info(&pcf->client.dev, "pcf50633_work_usbcurlim\n");
- 
- 	if (!pcf->probe_completed)
-@@ -663,7 +668,8 @@ bail:
- reschedule:
- 	dev_info(&pcf->client.dev, "pcf50633_work_usbcurlim rescheduling\n");
- 	if (!schedule_work(&pcf->work_usb_curlimit))
--		dev_err(&pcf->client.dev, "work item may be lost\n");
-+		dev_err(&pcf->client.dev, "curlim reschedule work "
-+							    "already queued\n");
- 
- 	mutex_unlock(&pcf->working_lock_usb_curlimit);
- 	/* don't spew, delaying whatever else is happening */
-@@ -700,7 +706,7 @@ int pcf50633_notify_usb_current_limit_change(struct pcf50633_data *pcf,
- 	pcf->pending_curlimit = ma;
- 
- 	if (!schedule_work(&pcf->work_usb_curlimit))
--		dev_err(&pcf->client.dev, "work item may be lost\n");
-+		dev_err(&pcf->client.dev, "curlim work item already queued\n");
- 
- 	return 0;
- }
-@@ -727,6 +733,9 @@ static void pcf50633_work_nobat(struct work_struct *work)
- 	while (1) {
- 		msleep(1000);
- 
-+		if (pcf->suspend_state != PCF50633_SS_RUNNING)
-+			continue;
-+
- 		/* there's a battery in there now? */
- 		if (reg_read(pcf, PCF50633_REG_MBCS3) & 0x40) {
- 
-@@ -761,6 +770,10 @@ static void pcf50633_work(struct work_struct *work)
- 	mutex_lock(&pcf->working_lock);
- 	pcf->working = 1;
- 
-+	/* sanity */
-+	if (!&pcf->client.dev)
-+		goto bail;
-+
- 	/*
- 	 * if we are presently suspending, we are not in a position to deal
- 	 * with pcf50633 interrupts at all.
-@@ -784,42 +797,55 @@ static void pcf50633_work(struct work_struct *work)
- 	 * reloaded with their pre-suspend states yet.  Therefore we will
- 	 * defer our service if we are called like that until our resume has
- 	 * completed.
-+	 *
-+	 * This shouldn't happen any more because we disable servicing this
-+	 * interrupt in suspend and don't re-enable it until resume is
-+	 * completed.
- 	 */
- 
--	if (pcf->have_been_suspended && (pcf->have_been_suspended < 3))
-+	if (pcf->suspend_state &&
-+		(pcf->suspend_state != PCF50633_SS_COMPLETED_RESUME))
-+		goto reschedule;
-+
-+	/* this is the case early in resume! Sanity check! */
-+	if (i2c_get_clientdata(&pcf->client) == NULL)
- 		goto reschedule;
- 
- 	/*
--	 * datasheet says we have to read the five IRQ
--	 * status regs in one transaction
--	 */
--	ret = i2c_smbus_read_i2c_block_data(&pcf->client, PCF50633_REG_INT1, 5,
--					    pcfirq);
--	if (ret != 5) {
-+	* datasheet says we have to read the five IRQ
-+	* status regs in one transaction
-+	*/
-+	ret = i2c_smbus_read_i2c_block_data(&pcf->client,
-+						PCF50633_REG_INT1,
-+						sizeof(pcfirq),
-+						pcfirq);
-+	if (ret != sizeof(pcfirq)) {
- 		dev_info(&pcf->client.dev,
- 			 "Oh crap PMU IRQ register read failed -- "
- 		         "retrying later %d\n", ret);
- 		/*
--		 * it shouldn't fail, we no longer attempt to use I2C while
--		 * it can be suspended.  But we don't have much option but to
--		 * retry if if it ever did fail, because if we don't service
--		 * the interrupt to clear it, we will never see another PMU
--		 * interrupt edge.
-+		 * it shouldn't fail, we no longer attempt to use
-+		 * I2C while it can be suspended.  But we don't have
-+		 * much option but to retry if if it ever did fail,
-+		 * because if we don't service the interrupt to clear
-+		 * it, we will never see another PMU interrupt edge.
- 		 */
- 		goto reschedule;
- 	}
- 
--	/* hey did we just resume? */
--
--	if (pcf->have_been_suspended) {
--		/* resume is officially over now then */
--		pcf->have_been_suspended = 0;
-+	/* hey did we just resume? (because we don't get here unless we are
-+	 * running normally or the first call after resumption)
-+	 */
- 
-+	if (pcf->suspend_state != PCF50633_SS_RUNNING) {
- 		/*
--		 * grab a copy of resume interrupt reasons
--		 * from pcf50633 POV
--		 */
-+		* grab a copy of resume interrupt reasons
-+		* from pcf50633 POV
-+		*/
- 		memcpy(pcf->pcfirq_resume, pcfirq, sizeof(pcf->pcfirq_resume));
-+
-+		/* pcf50633 resume is really really over now then */
-+		pcf->suspend_state = PCF50633_SS_RUNNING;
- 	}
- 
- 	if (!pcf->coldplug_done) {
-@@ -1168,6 +1194,7 @@ static void pcf50633_work(struct work_struct *work)
- 
- 	DEBUGPC("\n");
- 
-+bail:
- 	pcf->working = 0;
- 	input_sync(pcf->input_dev);
- 	put_device(&pcf->client.dev);
-@@ -1201,7 +1228,7 @@ static irqreturn_t pcf50633_irq(int irq, void *_pcf)
- 
- 	get_device(&pcf->client.dev);
- 	if (!schedule_work(&pcf->work) && !pcf->working)
--		dev_err(&pcf->client.dev, "work item may be lost\n");
-+		dev_err(&pcf->client.dev, "pcf irq work already queued\n");
- 
- 	return IRQ_HANDLED;
- }
-@@ -2303,7 +2330,7 @@ int pcf50633_report_resumers(struct pcf50633_data *pcf, char *buf)
- 	char *end = buf;
- 	int n;
- 
--	for (n = 0; n < 40; n++)
-+	for (n = 0; n < ARRAY_SIZE(int_names); n++)
- 		if (int_names[n]) {
- 			if (pcf->pcfirq_resume[n >> 3] & (1 >> (n & 7)))
- 				end += sprintf(end, "  * %s\n", int_names[n]);
-@@ -2352,6 +2379,15 @@ static int pcf50633_suspend(struct device *dev, pm_message_t state)
- 
- 	mutex_lock(&pcf->lock);
- 
-+	pcf->suspend_state = PCF50633_SS_STARTING_SUSPEND;
-+
-+	/* we are not going to service any further interrupts until we
-+	 * resume.  If the IRQ workqueue is still pending in the background,
-+	 * it will bail when it sees we set suspend state above
-+	 */
-+
-+	disable_irq(pcf->irq);
-+
- 	/* Save all registers that don't "survive" standby state */
- 	pcf->standby_regs.ooctim2 = __reg_read(pcf, PCF50633_REG_OOCTIM2);
- 
-@@ -2495,6 +2531,8 @@ static int pcf50633_resume(struct device *dev)
- 
- 	pcf->suspend_state = PCF50633_SS_COMPLETED_RESUME;
- 
-+	enable_irq(pcf->irq);
-+
- 	mutex_unlock(&pcf->lock);
- 
- 	/* gratuitous call to PCF work function, in the case that the PCF
-@@ -2504,8 +2542,7 @@ static int pcf50633_resume(struct device *dev)
- 	 */
- 
- 	get_device(&pcf->client.dev);
--	if (!schedule_work(&pcf->work) && !pcf->working)
--		dev_err(&pcf->client.dev, "resume work item may be lost\n");
-+	pcf50633_work(&pcf->work);
- 
- 	callback_all_resume_dependencies(&pcf->resume_dependency);
- 
--- 
-1.5.6.3
-