changed Makefile and profiles, added patches for kernel 2.6.24 (stable-branch of Openmoko)

SVN-Revision: 13613

1 files changed, 51 insertions, 0 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.26/0216-fix-scard-stop-on-resume.patch.patch b/target/linux/s3c24xx/patches-2.6.26/0216-fix-scard-stop-on-resume.patch.patch
new file mode 100755
index 0000000000..fd225c35fb
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.26/0216-fix-scard-stop-on-resume.patch.patch
@@ -0,0 +1,51 @@
+From 81b94de6dbb00676ddca78219eacf41b1928b33f Mon Sep 17 00:00:00 2001
+From: Andy Green <andy@openmoko.com>
+Date: Fri, 25 Jul 2008 23:06:20 +0100
+Subject: [PATCH] fix-scard-stop-on-resume.patch
+ Reported-by: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi>
+
+The reporter noticed SD Card clock is running again after resume.  After
+looking at the code I saw I missed two tricks, this will force it off
+after resume and will do better generally depending on what the last SD Card
+packet was.
+
+Since bulk read packet is normally last action (which set the clock off even
+without this) the old patch worked for normal cases.  But after resume, the last
+packet on the wire was not a bulk transfer and we didn't take care about the
+clock then.
+
+Signed-off-by: Andy Green <andy@openmoko.com>
+---
+ drivers/mfd/glamo/glamo-mci.c |    6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
+index 67bb815..93f4074 100644
+--- a/drivers/mfd/glamo/glamo-mci.c
++++ b/drivers/mfd/glamo/glamo-mci.c
+@@ -619,12 +619,9 @@ done:
+ 	host->complete_what = COMPLETION_NONE;
+ 	host->mrq = NULL;
+ 	mmc_request_done(host->mmc, cmd->mrq);
+-	return;
+-
+ bail:
+ 	/* stop the clock to card */
+ 	__glamo_mci_fix_card_div(host, -1);
+-	return;
+ }
+ 
+ static void glamo_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+@@ -690,6 +687,9 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ 	host->real_rate = __glamo_mci_set_card_clock(host, ios->clock, &div);
+ 	host->clk_div = div;
+ 
++	/* stop the clock to card, because we are idle until transfer */
++	__glamo_mci_fix_card_div(host, -1);
++
+ 	if ((ios->power_mode == MMC_POWER_ON) ||
+ 	    (ios->power_mode == MMC_POWER_UP)) {
+ 		dev_info(&host->pdev->dev,
+-- 
+1.5.6.3
+