changed Makefile and profiles, added patches for kernel 2.6.24 (stable-branch of Openmoko)

SVN-Revision: 13613

1 files changed, 2764 insertions, 0 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.24/1325-fix-missing-new-files-glofiish.patch.patch b/target/linux/s3c24xx/patches-2.6.24/1325-fix-missing-new-files-glofiish.patch.patch
new file mode 100644
index 0000000000..bcf912af59
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.24/1325-fix-missing-new-files-glofiish.patch.patch
@@ -0,0 +1,2764 @@
+From 3f12f6b0b863453038bc4b7435b5bab06be30f45 Mon Sep 17 00:00:00 2001
+From: Andy Green <andy@openmoko.com>
+Date: Tue, 18 Nov 2008 12:11:13 +0000
+Subject: [PATCH] fix-missing-new-files-glofiish.patch
+
+Add in uncommitted local files after Harald's patch
+
+Reported-by: Stefan Schmidt <stefan@openmoko.org>
+Signed-off-by: Andy Green <andy@openmoko.com>
+---
+ arch/arm/configs/glofiish_defconfig     | 1728 +++++++++++++++++++++++++++++++
+ arch/arm/mach-s3c2440/mach-glofiish.c   |  620 +++++++++++
+ drivers/input/keyboard/m800kbd.c        |  330 ++++++
+ include/asm-arm/arch-s3c2410/glofiish.h |   39 +
+ 4 files changed, 2717 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/configs/glofiish_defconfig
+ create mode 100644 arch/arm/mach-s3c2440/mach-glofiish.c
+ create mode 100644 drivers/input/keyboard/m800kbd.c
+ create mode 100644 include/asm-arm/arch-s3c2410/glofiish.h
+
+diff --git a/arch/arm/configs/glofiish_defconfig b/arch/arm/configs/glofiish_defconfig
+new file mode 100644
+index 0000000..808d61f
+--- /dev/null
++++ b/arch/arm/configs/glofiish_defconfig
+@@ -0,0 +1,1728 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24
++# Wed Nov 12 00:27:24 2008
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
++CONFIG_MMU=y
++CONFIG_NO_IOPORT=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_LOCK_KERNEL=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=m
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=m
++# CONFIG_DEFAULT_AS is not set
++CONFIG_DEFAULT_DEADLINE=y
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="deadline"
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++CONFIG_ARCH_S3C2410=y
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++CONFIG_PLAT_S3C24XX=y
++CONFIG_CPU_S3C244X=y
++CONFIG_S3C2410_DMA=y
++# CONFIG_S3C2410_DMA_DEBUG is not set
++CONFIG_MACH_SMDK=y
++CONFIG_PLAT_S3C=y
++CONFIG_CPU_LLSERIAL_S3C2410=y
++CONFIG_CPU_LLSERIAL_S3C2440=y
++
++#
++# Boot options
++#
++# CONFIG_S3C_BOOT_WATCHDOG is not set
++# CONFIG_S3C_BOOT_ERROR_RESET is not set
++
++#
++# Power management
++#
++# CONFIG_S3C2410_PM_CHECK is not set
++CONFIG_S3C_LOWLEVEL_UART_PORT=2
++
++#
++# S3C2400 Machines
++#
++CONFIG_CPU_S3C2410=y
++CONFIG_CPU_S3C2410_DMA=y
++CONFIG_S3C2410_PM=y
++CONFIG_S3C2410_GPIO=y
++CONFIG_S3C2410_CLOCK=y
++CONFIG_S3C2410_PWM=y
++
++#
++# S3C2410 Machines
++#
++# CONFIG_ARCH_SMDK2410 is not set
++# CONFIG_ARCH_H1940 is not set
++# CONFIG_MACH_N30 is not set
++# CONFIG_ARCH_BAST is not set
++# CONFIG_MACH_OTOM is not set
++# CONFIG_MACH_AML_M5900 is not set
++# CONFIG_MACH_VR1000 is not set
++CONFIG_MACH_QT2410=y
++# CONFIG_MACH_NEO1973_GTA01 is not set
++
++#
++# S3C2412 Machines
++#
++# CONFIG_MACH_SMDK2413 is not set
++# CONFIG_MACH_SMDK2412 is not set
++# CONFIG_MACH_VSTMS is not set
++CONFIG_CPU_S3C2440=y
++CONFIG_S3C2440_DMA=y
++# CONFIG_S3C2440_C_FIQ is not set
++
++#
++# S3C2440 Machines
++#
++# CONFIG_MACH_ANUBIS is not set
++# CONFIG_MACH_OSIRIS is not set
++# CONFIG_MACH_RX3715 is not set
++CONFIG_ARCH_S3C2440=y
++# CONFIG_MACH_NEXCODER_2440 is not set
++CONFIG_SMDK2440_CPU2440=y
++# CONFIG_MACH_HXD8 is not set
++# CONFIG_MACH_NEO1973_GTA02 is not set
++CONFIG_MACH_M800=y
++CONFIG_CPU_S3C2442=y
++
++#
++# S3C2442 Machines
++#
++CONFIG_SMDK2440_CPU2442=y
++
++#
++# S3C2443 Machines
++#
++# CONFIG_MACH_SMDK2443 is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM920T=y
++CONFIG_CPU_32v4T=y
++CONFIG_CPU_ABRT_EV4T=y
++CONFIG_CPU_CACHE_V4WT=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_OUTER_CACHE is not set
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_TICK_ONESHOT is not set
++CONFIG_PREEMPT=y
++CONFIG_NO_IDLE_HZ=y
++CONFIG_HZ=200
++CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="root=/dev/mmcblk0p1 rootdelay=5"
++# CONFIG_XIP_KERNEL is not set
++CONFIG_KEXEC=y
++CONFIG_ATAGS_PROC=y
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Power management options
++#
++CONFIG_PM=y
++CONFIG_PM_LEGACY=y
++CONFIG_PM_DEBUG=y
++# CONFIG_PM_VERBOSE is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND_UP_POSSIBLE=y
++CONFIG_SUSPEND=y
++CONFIG_APM_EMULATION=y
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++CONFIG_XFRM_MIGRATE=y
++CONFIG_NET_KEY=m
++CONFIG_NET_KEY_MIGRATE=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_MULTIPLE_TABLES=y
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
++# CONFIG_NET_IPGRE_BROADCAST is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_TUNNEL=m
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++CONFIG_TCP_MD5SIG=y
++# CONFIG_IP_VS is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++
++#
++# Core Netfilter Configuration
++#
++CONFIG_NETFILTER_NETLINK=m
++CONFIG_NETFILTER_NETLINK_QUEUE=m
++CONFIG_NETFILTER_NETLINK_LOG=m
++CONFIG_NF_CONNTRACK_ENABLED=m
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CT_ACCT=y
++CONFIG_NF_CONNTRACK_MARK=y
++CONFIG_NF_CONNTRACK_EVENTS=y
++CONFIG_NF_CT_PROTO_GRE=m
++CONFIG_NF_CT_PROTO_SCTP=m
++# CONFIG_NF_CT_PROTO_UDPLITE is not set
++# CONFIG_NF_CONNTRACK_AMANDA is not set
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_NETBIOS_NS=m
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NF_CT_NETLINK=m
++CONFIG_NETFILTER_XTABLES=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
++CONFIG_NETFILTER_XT_TARGET_DSCP=m
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_DCCP=m
++CONFIG_NETFILTER_XT_MATCH_DSCP=m
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++CONFIG_NETFILTER_XT_MATCH_SCTP=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++# CONFIG_NETFILTER_XT_MATCH_TIME is not set
++# CONFIG_NETFILTER_XT_MATCH_U32 is not set
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
++# CONFIG_IP_NF_QUEUE is not set
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_IPRANGE=m
++CONFIG_IP_NF_MATCH_TOS=m
++# CONFIG_IP_NF_MATCH_RECENT is not set
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_MATCH_OWNER=m
++CONFIG_IP_NF_MATCH_ADDRTYPE=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++CONFIG_IP_NF_TARGET_ULOG=m
++CONFIG_NF_NAT=m
++CONFIG_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_IP_NF_TARGET_REDIRECT=m
++CONFIG_IP_NF_TARGET_NETMAP=m
++CONFIG_IP_NF_TARGET_SAME=m
++CONFIG_NF_NAT_SNMP_BASIC=m
++CONFIG_NF_NAT_PROTO_GRE=m
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++CONFIG_NF_NAT_TFTP=m
++# CONFIG_NF_NAT_AMANDA is not set
++CONFIG_NF_NAT_PPTP=m
++CONFIG_NF_NAT_H323=m
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_TOS=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_TARGET_CLUSTERIP=m
++# CONFIG_IP_NF_RAW is not set
++# CONFIG_IP_NF_ARPTABLES is not set
++
++#
++# IPv6: Netfilter Configuration (EXPERIMENTAL)
++#
++CONFIG_NF_CONNTRACK_IPV6=m
++# CONFIG_IP6_NF_QUEUE is not set
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_OWNER=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_LOG=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_TARGET_HL=m
++# CONFIG_IP6_NF_RAW is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++CONFIG_NET_SCHED=y
++
++#
++# Queueing/Scheduling
++#
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_PRIO=m
++# CONFIG_NET_SCH_RR is not set
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_SCH_INGRESS=m
++
++#
++# Classification
++#
++CONFIG_NET_CLS=y
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_ROUTE=y
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_PERF=y
++CONFIG_CLS_U32_MARK=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++# CONFIG_NET_EMATCH is not set
++# CONFIG_NET_CLS_ACT is not set
++# CONFIG_NET_CLS_POLICE is not set
++# CONFIG_NET_CLS_IND is not set
++CONFIG_NET_SCH_FIFO=y
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++CONFIG_BT=m
++CONFIG_BT_L2CAP=m
++CONFIG_BT_SCO=m
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=m
++
++#
++# Bluetooth device drivers
++#
++CONFIG_BT_HCIUSB=m
++CONFIG_BT_HCIUSB_SCO=y
++# CONFIG_BT_HCIBTSDIO is not set
++# CONFIG_BT_HCIUART is not set
++# CONFIG_BT_HCIBCM203X is not set
++# CONFIG_BT_HCIBPA10X is not set
++# CONFIG_BT_HCIBFUSB is not set
++# CONFIG_BT_HCIVHCI is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_FIB_RULES=y
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++CONFIG_WIRELESS_EXT=y
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=m
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=m
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++CONFIG_MTD_CFI_INTELEXT=y
++# CONFIG_MTD_CFI_AMDSTD is not set
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++CONFIG_MTD_ABSENT=y
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_ARM_INTEGRATOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_VERIFY_WRITE=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++CONFIG_MTD_NAND_IDS=y
++CONFIG_MTD_NAND_S3C2410=y
++# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
++CONFIG_MTD_NAND_S3C2410_HWECC=y
++# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_UB=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_IDE is not set
++
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++CONFIG_CHR_DEV_SG=m
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++CONFIG_SCSI_SCAN_ASYNC=y
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++CONFIG_TUN=m
++# CONFIG_VETH is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++CONFIG_NET_PCI=y
++# CONFIG_B44 is not set
++CONFIG_CS89x0=m
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++CONFIG_USB_CATC=m
++CONFIG_USB_KAWETH=m
++CONFIG_USB_PEGASUS=m
++CONFIG_USB_RTL8150=m
++CONFIG_USB_USBNET=y
++CONFIG_USB_NET_AX8817X=m
++CONFIG_USB_NET_CDCETHER=m
++CONFIG_USB_NET_DM9601=m
++CONFIG_USB_NET_GL620A=m
++CONFIG_USB_NET_NET1080=m
++CONFIG_USB_NET_PLUSB=m
++CONFIG_USB_NET_MCS7830=m
++CONFIG_USB_NET_RNDIS_HOST=m
++CONFIG_USB_NET_CDC_SUBSET=m
++CONFIG_USB_ALI_M5632=y
++CONFIG_USB_AN2720=y
++CONFIG_USB_BELKIN=y
++CONFIG_USB_ARMLINUX=y
++CONFIG_USB_EPSON2888=y
++CONFIG_USB_KC2190=y
++CONFIG_USB_NET_ZAURUS=m
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++CONFIG_PPP_MULTILINK=y
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPP_MPPE=m
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++CONFIG_KEYBOARD_STOWAWAY=m
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_KEYBOARD_M800=y
++CONFIG_KEYBOARD_QT2410=y
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++# CONFIG_MOUSE_GPIO is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++# CONFIG_TOUCHSCREEN_ADS7846 is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++CONFIG_TOUCHSCREEN_S3C2410=y
++# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_UCB1400 is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_INPUT_ATI_REMOTE is not set
++# CONFIG_INPUT_ATI_REMOTE2 is not set
++# CONFIG_INPUT_KEYSPAN_REMOTE is not set
++# CONFIG_INPUT_POWERMATE is not set
++# CONFIG_INPUT_YEALINK is not set
++CONFIG_INPUT_UINPUT=m
++CONFIG_INPUT_LIS302DL=y
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++# CONFIG_SERIO_SERPORT is not set
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_NR_TTY_DEVICES=4
++CONFIG_HW_CONSOLE=y
++CONFIG_VT_HW_CONSOLE_BINDING=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_S3C2410=y
++CONFIG_SERIAL_S3C2410_CONSOLE=y
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_GPIO is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++CONFIG_I2C_S3C2410=y
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++CONFIG_SENSORS_PCF50606=y
++CONFIG_SENSORS_PCF50633=y
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++CONFIG_SENSORS_TSL256X=m
++# CONFIG_PCA9632 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_BITBANG=y
++CONFIG_SPI_S3C24XX=y
++CONFIG_SPI_S3C24XX_GPIO=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++CONFIG_POWER_SUPPLY=y
++# CONFIG_POWER_SUPPLY_DEBUG is not set
++# CONFIG_PDA_POWER is not set
++CONFIG_APM_POWER=y
++# CONFIG_BATTERY_DS2760 is not set
++CONFIG_BATTERY_BQ27000_HDQ=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_S3C2410_WATCHDOG=m
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_GLAMO is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_UVESA is not set
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_S3C2410=y
++# CONFIG_FB_S3C2410_DEBUG is not set
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++# CONFIG_LCD_LTV350QV is not set
++CONFIG_BACKLIGHT_CLASS_DEVICE=y
++# CONFIG_BACKLIGHT_CORGI is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++CONFIG_DISPLAY_JBT6K74=y
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
++CONFIG_FONTS=y
++# CONFIG_FONT_8x8 is not set
++# CONFIG_FONT_8x16 is not set
++CONFIG_FONT_6x11=y
++# CONFIG_FONT_7x14 is not set
++# CONFIG_FONT_PEARL_8x8 is not set
++# CONFIG_FONT_ACORN_8x8 is not set
++# CONFIG_FONT_MINI_4x6 is not set
++# CONFIG_FONT_SUN8x16 is not set
++# CONFIG_FONT_SUN12x22 is not set
++# CONFIG_FONT_10x18 is not set
++# CONFIG_LOGO is not set
++
++#
++# Sound
++#
++CONFIG_SOUND=y
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++CONFIG_SND_RAWMIDI=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# ALSA ARM devices
++#
++
++#
++# SPI devices
++#
++
++#
++# USB devices
++#
++# CONFIG_SND_USB_AUDIO is not set
++# CONFIG_SND_USB_CAIAQ is not set
++
++#
++# System on Chip audio support
++#
++CONFIG_SND_SOC=m
++CONFIG_SND_S3C24XX_SOC=m
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
++CONFIG_USB_HIDDEV=y
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++CONFIG_USB_SUSPEND=y
++# CONFIG_USB_PERSIST is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=m
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++CONFIG_USB_ACM=m
++CONFIG_USB_PRINTER=m
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=m
++# CONFIG_USB_STORAGE_DEBUG is not set
++CONFIG_USB_STORAGE_DATAFAB=y
++CONFIG_USB_STORAGE_FREECOM=y
++# CONFIG_USB_STORAGE_ISD200 is not set
++CONFIG_USB_STORAGE_DPCM=y
++CONFIG_USB_STORAGE_USBAT=y
++CONFIG_USB_STORAGE_SDDR09=y
++CONFIG_USB_STORAGE_SDDR55=y
++CONFIG_USB_STORAGE_JUMPSHOT=y
++CONFIG_USB_STORAGE_ALAUDA=y
++CONFIG_USB_STORAGE_KARMA=y
++CONFIG_USB_LIBUSUAL=y
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++CONFIG_USB_SERIAL=m
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_AIRCABLE=m
++CONFIG_USB_SERIAL_AIRPRIME=m
++CONFIG_USB_SERIAL_ARK3116=m
++CONFIG_USB_SERIAL_BELKIN=m
++# CONFIG_USB_SERIAL_CH341 is not set
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++CONFIG_USB_SERIAL_CP2101=m
++CONFIG_USB_SERIAL_CYPRESS_M8=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_FUNSOFT=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_GARMIN=m
++CONFIG_USB_SERIAL_IPW=m
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KEYSPAN_MPR=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
++CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19=y
++CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
++CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
++CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
++CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_MOS7720=m
++CONFIG_USB_SERIAL_MOS7840=m
++CONFIG_USB_SERIAL_NAVMAN=m
++CONFIG_USB_SERIAL_PL2303=m
++# CONFIG_USB_SERIAL_OTI6858 is not set
++CONFIG_USB_SERIAL_HP4X=m
++CONFIG_USB_SERIAL_SAFE=m
++CONFIG_USB_SERIAL_SAFE_PADDED=y
++CONFIG_USB_SERIAL_SIERRAWIRELESS=m
++CONFIG_USB_SERIAL_TI=m
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OPTION=m
++CONFIG_USB_SERIAL_OMNINET=m
++# CONFIG_USB_SERIAL_DEBUG is not set
++CONFIG_USB_EZUSB=y
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++CONFIG_USB_GADGET_S3C2410=y
++CONFIG_USB_S3C2410=y
++# CONFIG_USB_S3C2410_DEBUG is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++CONFIG_USB_MIDI_GADGET=m
++
++#
++# SDIO support
++#
++# CONFIG_SDIO is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++CONFIG_MMC_UNSAFE_RESUME=y
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++CONFIG_SDIO_UART=m
++
++#
++# MMC/SD Host Controller Drivers
++#
++# CONFIG_MMC_SPI is not set
++CONFIG_MMC_S3C=y
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_S3C24XX=m
++# CONFIG_LEDS_GPIO is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++CONFIG_RTC_DEBUG=y
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_S3C=m
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++CONFIG_FS_POSIX_ACL=y
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++CONFIG_ROMFS_FS=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++CONFIG_AUTOFS4_FS=m
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++# CONFIG_ZISOFS is not set
++CONFIG_UDF_FS=m
++CONFIG_UDF_NLS=y
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=m
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++CONFIG_JFFS2_SUMMARY=y
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++# CONFIG_NFSD_V3_ACL is not set
++CONFIG_NFSD_V4=y
++CONFIG_NFSD_TCP=y
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++CONFIG_CIFS_WEAK_PW_HASH=y
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=m
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++# CONFIG_MARKERS is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_SCHED_DEBUG is not set
++# CONFIG_SCHEDSTATS is not set
++CONFIG_TIMER_STATS=y
++# CONFIG_DEBUG_SLAB is not set
++CONFIG_DEBUG_PREEMPT=y
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_USER is not set
++CONFIG_DEBUG_ERRORS=y
++# CONFIG_DEBUG_LL is not set
++CONFIG_DEBUG_S3C_UART=2
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_NULL=m
++CONFIG_CRYPTO_MD4=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=m
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_GF128MUL=m
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++CONFIG_CRYPTO_LRW=m
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++CONFIG_CRYPTO_FCRYPT=m
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_TWOFISH_COMMON=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_AES=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_ARC4=m
++CONFIG_CRYPTO_KHAZAD=m
++CONFIG_CRYPTO_ANUBIS=m
++# CONFIG_CRYPTO_SEED is not set
++CONFIG_CRYPTO_DEFLATE=m
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_CRC32C=m
++CONFIG_CRYPTO_CAMELLIA=m
++CONFIG_CRYPTO_TEST=m
++# CONFIG_CRYPTO_AUTHENC is not set
++CONFIG_CRYPTO_HW=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=m
++CONFIG_CRC16=m
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++CONFIG_LIBCRC32C=m
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_TEXTSEARCH=y
++CONFIG_TEXTSEARCH_KMP=m
++CONFIG_TEXTSEARCH_BM=m
++CONFIG_TEXTSEARCH_FSM=m
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
+diff --git a/arch/arm/mach-s3c2440/mach-glofiish.c b/arch/arm/mach-s3c2440/mach-glofiish.c
+new file mode 100644
+index 0000000..ee97110
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/mach-glofiish.c
+@@ -0,0 +1,620 @@
++/*
++ * linux/arch/arm/mach-s3c2440/mach-glofiish.c
++ *
++ * S3C2440 Machine Support for the E-TEN glofiish X800/M800
++ *
++ * Copyright (C) 2008 by Harald Welte <laforge@gnumonks.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <linux/timer.h>
++#include <linux/init.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/serial_core.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/mmc/host.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/nand_ecc.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++
++#include <asm/arch-s3c2410/regs-irq.h>
++#include <asm/arch/regs-gpio.h>
++#include <asm/arch/regs-gpioj.h>
++#include <asm/arch/fb.h>
++#include <asm/arch/mci.h>
++#include <asm/arch/ts.h>
++#include <asm/arch/spi.h>
++#include <asm/arch/spi-gpio.h>
++#include <asm/arch/usb-control.h>
++
++#include <asm/arch/glofiish.h>
++#include <asm/arch/gta01.h>
++
++#include <asm/plat-s3c/regs-serial.h>
++#include <asm/plat-s3c/nand.h>
++#include <asm/plat-s3c24xx/devs.h>
++#include <asm/plat-s3c24xx/cpu.h>
++#include <asm/plat-s3c24xx/pm.h>
++#include <asm/plat-s3c24xx/udc.h>
++
++#include <linux/jbt6k74.h>
++
++/*
++ * this gets called every 1ms when we paniced.
++ */
++
++static long glofiish_panic_blink(long count)
++{
++	long delay = 0;
++	static long last_blink;
++	static char led;
++
++	if (count - last_blink < 100) /* 200ms period, fast blink */
++		return 0;
++
++	/* FIXME */
++#if 0
++	led ^= 1;
++	s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT);
++	neo1973_gpb_setpin(GTA02_GPIO_AUX_LED, led);
++
++	last_blink = count;
++#endif
++	return delay;
++}
++
++struct platform_device gta02_version_device = {
++	.name 		= "neo1973-version",
++	.num_resources	= 0,
++};
++
++struct platform_device gta02_resume_reason_device = {
++	.name 		= "neo1973-resume",
++	.num_resources	= 0,
++};
++
++struct platform_device gta02_memconfig_device = {
++	.name 		= "neo1973-memconfig",
++	.num_resources	= 0,
++};
++
++static struct map_desc m800_iodesc[] __initdata = {
++	{
++		.virtual	= 0xe0000000,
++		.pfn		= __phys_to_pfn(S3C2410_CS3+0x01000000),
++		.length		= SZ_1M,
++		.type		= MT_DEVICE
++	},
++};
++
++#define UCON S3C2410_UCON_DEFAULT
++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
++
++static struct s3c2410_uartcfg m800_uartcfgs[] = {
++	[0] = {
++		.hwport	     = 0,
++		.flags	     = 0,
++		.ucon	     = UCON,
++		.ulcon	     = ULCON,
++		.ufcon	     = UFCON,
++	},
++	[1] = {
++		.hwport	     = 1,
++		.flags	     = 0,
++		.ucon	     = UCON,
++		.ulcon	     = ULCON,
++		.ufcon	     = UFCON,
++	},
++	[2] = {
++		.hwport	     = 2,
++		.flags	     = 0,
++		.ucon	     = UCON,
++		.ulcon	     = ULCON,
++		.ufcon	     = UFCON,
++	},
++
++};
++
++/* Configuration for 480x640 toppoly TD028TTEC1.
++ * Do not mark this as __initdata or it will break! */
++static struct s3c2410fb_display glofiish_displays[] =  {
++	{
++		.type		= S3C2410_LCDCON1_TFT,
++		.width		= 43,
++		.height		= 58,
++		.xres		= 480,
++		.yres		= 640,
++		.bpp		= 16,
++
++		.pixclock	= 40000,	/* HCLK/4 */
++		.left_margin	= 2,
++		.right_margin	= 2,
++		.hsync_len	= 2,
++		.upper_margin	= 2,
++		.lower_margin	= 66,
++		.vsync_len	= 2,
++		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
++				  S3C2410_LCDCON5_INVVCLK |
++				  S3C2410_LCDCON5_INVVLINE |
++				  S3C2410_LCDCON5_INVVFRAME |
++				  S3C2410_LCDCON5_PWREN |
++				  S3C2410_LCDCON5_HWSWP,
++	},
++	{
++		.type		= S3C2410_LCDCON1_TFT,
++		.width		= 43,
++		.height		= 58,
++		.xres		= 480,
++		.yres		= 640,
++		.bpp		= 32,
++
++		.pixclock	= 40000,	/* HCLK/4 */
++		.left_margin	= 104,
++		.right_margin	= 8,
++		.hsync_len	= 8,
++		.upper_margin	= 2,
++		.lower_margin	= 16,
++		.vsync_len	= 2,
++		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
++				  S3C2410_LCDCON5_INVVCLK |
++				  S3C2410_LCDCON5_INVVLINE |
++				  S3C2410_LCDCON5_INVVFRAME |
++				  S3C2410_LCDCON5_PWREN |
++				  S3C2410_LCDCON5_HWSWP,
++	},
++	{
++		.type		= S3C2410_LCDCON1_TFT,
++		.width		= 43,
++		.height		= 58,
++		.xres		= 240,
++		.yres		= 320,
++		.bpp		= 16,
++
++		.pixclock	= 40000,	/* HCLK/4 */
++		.left_margin	= 104,
++		.right_margin	= 8,
++		.hsync_len	= 8,
++		.upper_margin	= 2,
++		.lower_margin	= 16,
++		.vsync_len	= 2,
++		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
++				  S3C2410_LCDCON5_INVVCLK |
++				  S3C2410_LCDCON5_INVVLINE |
++				  S3C2410_LCDCON5_INVVFRAME |
++				  S3C2410_LCDCON5_PWREN |
++				  S3C2410_LCDCON5_HWSWP,
++	},
++};
++
++static struct s3c2410fb_mach_info glofiish_lcd_cfg __initdata = {
++	.displays	= glofiish_displays,
++	.num_displays	= ARRAY_SIZE(glofiish_displays),
++	.default_display = 0,
++
++	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
++};
++
++
++static struct resource m800_sdio_resources[] = {
++	[0] = {
++		.flags	= IORESOURCE_IRQ,
++		.start	= IRQ_SDI,
++		.end	= IRQ_SDI,
++	},
++	[1] = {
++		.flags = IORESOURCE_MEM,
++		.start = S3C2410_PA_SDI,
++		.end   = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
++	},
++	[2] = {
++		.flags = IORESOURCE_DMA,
++		.start = 0, /* Channel 0 for SDI */
++		.end = 0,
++	},
++};
++
++static struct platform_device *glofiish_devices[] __initdata = {
++	&s3c_device_usb,
++	&s3c_device_lcd,
++	&s3c_device_wdt,
++	&s3c_device_i2c,
++	&s3c_device_iis,
++	&s3c_device_sdi,
++	&s3c_device_usbgadget,
++	&s3c_device_nand,
++	&s3c_device_ts,
++};
++
++static struct s3c2410_nand_set glofiish_nand_sets[] = {
++	[0] = {
++		.name		= "glofiish-nand",
++		.nr_chips	= 1,
++		.flags		= S3C2410_NAND_BBT,
++	},
++};
++
++/* choose a set of timings derived from S3C@2442B MCP54 
++ * data sheet (K5D2G13ACM-D075 MCP Memory)
++ */
++
++static struct s3c2410_platform_nand glofiish_nand_info = {
++	.tacls		= 0,
++	.twrph0		= 25,
++	.twrph1		= 15,
++	.nr_sets	= ARRAY_SIZE(glofiish_nand_sets),
++	.sets		= glofiish_nand_sets,
++	.software_ecc	= 1,
++};
++
++static struct s3c24xx_mci_pdata glofiish_mmc_cfg = {
++	.gpio_detect	= M800_GPIO_nSD_DETECT,
++	.set_power	= NULL,
++	.ocr_avail	= MMC_VDD_32_33,
++};
++
++static void glofiish_udc_command(enum s3c2410_udc_cmd_e cmd)
++{
++	printk(KERN_DEBUG "%s(%d)\n", __func__, cmd);
++
++	switch (cmd) {
++	case S3C2410_UDC_P_ENABLE:
++		s3c2410_gpio_setpin(M800_GPIO_USB_PULLUP, 1);
++		break;
++	case S3C2410_UDC_P_DISABLE:
++		s3c2410_gpio_setpin(M800_GPIO_USB_PULLUP, 0);
++		break;
++	case S3C2410_UDC_P_RESET:
++		/* FIXME! */
++		break;
++	default:
++		break;
++	}
++}
++
++/* get PMU to set USB current limit accordingly */
++
++static void glofiish_udc_vbus_draw(unsigned int ma)
++{
++	//pcf50633_notify_usb_current_limit_change(pcf50633_global, ma);
++}
++
++static struct s3c2410_udc_mach_info glofiish_udc_cfg = {
++	.vbus_draw	= glofiish_udc_vbus_draw,
++	.udc_command	= glofiish_udc_command,
++
++};
++
++static struct s3c2410_ts_mach_info glofiish_ts_cfg = {
++	.delay = 10000,
++	.presc = 50000000 / 1000000, /* 50 MHz PCLK / 1MHz */
++	/* simple averaging, 2^n samples */
++	.oversampling_shift = 5,
++	 /* averaging filter length, 2^n */
++	.excursion_filter_len_bits = 5,
++	/* flagged for beauty contest on next sample if differs from
++	 * average more than this
++	 */
++	.reject_threshold_vs_avg = 2,
++};
++
++
++/* SPI: LCM control interface attached to Glamo3362 */
++
++static void m800_jbt6k74_reset(int devidx, int level)
++{
++	//glamo_lcm_reset(level);
++	printk(KERN_DEBUG "gta01_jbt6k74_reset\n");
++}
++
++/* finally bring up deferred backlight resume now LCM is resumed itself */
++
++static void m800_jbt6k74_resuming(int devidx)
++{
++	//pcf50633_backlight_resume(pcf50633_global);
++	//gta01bl_deferred_resume();
++}
++
++const struct jbt6k74_platform_data jbt6k74_pdata = {
++	.reset		= m800_jbt6k74_reset,
++	.resuming	= m800_jbt6k74_resuming,
++};
++
++static struct spi_board_info glofiish_spi_board_info[] = {
++	{
++		.modalias	= "jbt6k74",
++		/* platform_data */
++		.platform_data	= &jbt6k74_pdata,
++		/* controller_data */
++		/* irq */
++		.max_speed_hz	= 10 * 1000 * 1000,
++		.bus_num	= 2,
++		/* chip_select */
++	},
++};
++
++static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int csidx, int cs)
++{
++	switch (cs) {
++	case BITBANG_CS_ACTIVE:
++		s3c2410_gpio_setpin(S3C2410_GPG3, 0);
++		break;
++	case BITBANG_CS_INACTIVE:
++		s3c2410_gpio_setpin(S3C2410_GPG3, 1);
++		break;
++	}
++}
++
++static struct s3c2410_spigpio_info spi_gpio_cfg = {
++	.pin_clk	= S3C2410_GPG7,
++	.pin_mosi	= S3C2410_GPG6,
++	.pin_miso	= S3C2410_GPG5,
++	.board_size	= ARRAY_SIZE(glofiish_spi_board_info),
++	.board_info	= glofiish_spi_board_info,
++	.chip_select	= &spi_gpio_cs,
++	.num_chipselect = 2,   /*** Should be 1 or 2 for gta01? ***/
++};
++
++static struct resource s3c_spi_lcm_resource[] = {
++	[0] = {
++		.start = S3C2410_GPG3,
++		.end   = S3C2410_GPG3,
++	},
++	[1] = {
++		.start = S3C2410_GPG5,
++		.end   = S3C2410_GPG5,
++	},
++	[2] = {
++		.start = S3C2410_GPG6,
++		.end   = S3C2410_GPG6,
++	},
++	[3] = {
++		.start = S3C2410_GPG7,
++		.end   = S3C2410_GPG7,
++	},
++};
++
++struct platform_device s3c_device_spi_lcm = {
++	.name		  = "spi_s3c24xx_gpio",
++	.id		  = 1,
++	.num_resources	  = ARRAY_SIZE(s3c_spi_lcm_resource),
++	.resource	  = s3c_spi_lcm_resource,
++	.dev = {
++		.platform_data = &spi_gpio_cfg,
++	},
++};
++
++static struct gta01bl_machinfo backlight_machinfo = {
++	.default_intensity	= 1,
++	.max_intensity		= 1,
++	.limit_mask		= 1,
++	.defer_resume_backlight	= 1,
++};
++
++static struct resource gta01_bl_resources[] = {
++	[0] = {
++		.start	= M800_GPIO_BACKLIGHT,
++		.end	= M800_GPIO_BACKLIGHT,
++	},
++};
++
++struct platform_device gta01_bl_dev = {
++	.name 		= "gta01-bl",
++	.num_resources	= ARRAY_SIZE(gta01_bl_resources),
++	.resource	= gta01_bl_resources,
++	.dev		= {
++		.platform_data = &backlight_machinfo,
++	},
++};
++
++
++#if 0 /* currently this is not used and we use gpio spi */
++static struct glamo_spi_info glamo_spi_cfg = {
++	.board_size	= ARRAY_SIZE(gta02_spi_board_info),
++	.board_info	= gta02_spi_board_info,
++};
++#endif /* 0 */
++
++#if 0
++static struct resource gta02_vibrator_resources[] = {
++	[0] = {
++		.start	= GTA02_GPIO_VIBRATOR_ON,
++		.end	= GTA02_GPIO_VIBRATOR_ON,
++	},
++};
++
++static struct platform_device gta02_vibrator_dev = {
++	.name		= "neo1973-vibrator",
++	.num_resources	= ARRAY_SIZE(gta02_vibrator_resources),
++	.resource	= gta02_vibrator_resources,
++};
++
++static struct resource gta02_led_resources[] = {
++	{
++		.name	= "gta02-power:orange",
++		.start	= GTA02_GPIO_PWR_LED1,
++		.end	= GTA02_GPIO_PWR_LED1,
++	}, {
++		.name	= "gta02-power:blue",
++		.start	= GTA02_GPIO_PWR_LED2,
++		.end	= GTA02_GPIO_PWR_LED2,
++	}, {
++		.name	= "gta02-aux:red",
++		.start	= GTA02_GPIO_AUX_LED,
++		.end	= GTA02_GPIO_AUX_LED,
++	},
++};
++
++struct platform_device gta02_led_dev = {
++	.name		= "gta02-led",
++	.num_resources	= ARRAY_SIZE(gta02_led_resources),
++	.resource	= gta02_led_resources,
++};
++
++static struct resource gta02_button_resources[] = {
++	[0] = {
++		.start = GTA02_GPIO_AUX_KEY,
++		.end   = GTA02_GPIO_AUX_KEY,
++	},
++	[1] = {
++		.start = GTA02_GPIO_HOLD_KEY,
++		.end   = GTA02_GPIO_HOLD_KEY,
++	},
++	[2] = {
++		.start = GTA02_GPIO_JACK_INSERT,
++		.end   = GTA02_GPIO_JACK_INSERT,
++	},
++};
++
++static struct platform_device gta02_button_dev = {
++	.name		= "neo1973-button",
++	.num_resources	= ARRAY_SIZE(gta02_button_resources),
++	.resource	= gta02_button_resources,
++};
++#endif
++
++/* USB */
++static struct s3c2410_hcd_info glofiish_usb_info = {
++	.port[0]	= {
++		.flags	= S3C_HCDFLG_USED,
++	},
++	.port[1]	= {
++		.flags	= 0,
++	},
++};
++
++static struct resource m800_button_resources[] = {
++	[0] = {
++		.start = M800_GPIO_nKEY_POWER,
++		.end   = M800_GPIO_nKEY_POWER,
++	},
++	[1] = {
++		.start = M800_GPIO_nKEY_CAMERA,
++		.end   = M800_GPIO_nKEY_CAMERA,
++	},
++	[3] = {
++		.start = M800_GPIO_nKEY_RECORD,
++		.end   = M800_GPIO_nKEY_RECORD,
++	},
++	[2] = {
++		.start = M800_GPIO_SLIDE,
++		.end   = M800_GPIO_SLIDE,
++	},
++};
++
++static struct platform_device m800_button_dev = {
++	.name		= "m800-button",
++	.num_resources	= ARRAY_SIZE(m800_button_resources),
++	.resource	= m800_button_resources,
++};
++
++static struct platform_device m800_pm_bt_dev = {
++	.name		= "neo1973-pm-bt",
++};
++
++static void __init glofiish_map_io(void)
++{
++	s3c24xx_init_io(m800_iodesc, ARRAY_SIZE(m800_iodesc));
++	s3c24xx_init_clocks(16934400);
++	s3c24xx_init_uarts(m800_uartcfgs, ARRAY_SIZE(m800_uartcfgs));
++}
++
++static irqreturn_t gta02_modem_irq(int irq, void *param)
++{
++	printk(KERN_DEBUG "modem wakeup interrupt\n");
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t ar6000_wow_irq(int irq, void *param)
++{
++	printk(KERN_DEBUG "ar6000_wow interrupt\n");
++	return IRQ_HANDLED;
++}
++
++/*
++ * hardware_ecc=1|0
++ */
++static char hardware_ecc_str[4] __initdata = "";
++
++static int __init hardware_ecc_setup(char *str)
++{
++	if (str)
++		strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str));
++	return 1;
++}
++
++__setup("hardware_ecc=", hardware_ecc_setup);
++
++static void __init glofiish_machine_init(void)
++{
++	int rc;
++
++	/* set the panic callback to make AUX blink fast */
++	panic_blink = glofiish_panic_blink;
++
++	/* do not force soft ecc if we are asked to use hardware_ecc */
++	if (hardware_ecc_str[0] == '1')
++		glofiish_nand_info.software_ecc = 0;
++
++	s3c_device_usb.dev.platform_data = &glofiish_usb_info;
++	s3c_device_nand.dev.platform_data = &glofiish_nand_info;
++	s3c_device_sdi.dev.platform_data = &glofiish_mmc_cfg;
++
++	s3c24xx_fb_set_platdata(&glofiish_lcd_cfg);
++	s3c24xx_udc_set_platdata(&glofiish_udc_cfg);
++	set_s3c2410ts_info(&glofiish_ts_cfg);
++
++	platform_device_register(&gta01_bl_dev);
++	platform_device_register(&m800_pm_bt_dev);
++	platform_device_register(&m800_button_dev);
++	platform_device_register(&s3c_device_spi_lcm);
++
++	platform_add_devices(glofiish_devices, ARRAY_SIZE(glofiish_devices));
++
++	s3c2410_pm_init();
++}
++
++MACHINE_START(M800, "Glofiish M800")
++	.phys_io	= S3C2410_PA_UART,
++	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
++	.boot_params	= S3C2410_SDRAM_PA + 0x100,
++	.map_io		= glofiish_map_io,
++	.init_irq	= s3c24xx_init_irq,
++	.init_machine	= glofiish_machine_init,
++	.timer		= &s3c24xx_timer,
++MACHINE_END
+diff --git a/drivers/input/keyboard/m800kbd.c b/drivers/input/keyboard/m800kbd.c
+new file mode 100644
+index 0000000..22f1aab
+--- /dev/null
++++ b/drivers/input/keyboard/m800kbd.c
+@@ -0,0 +1,330 @@
++/*
++ * Keyboard driver for E-TEN M800 GSM phone
++ *
++ * (C) 2008 by Harald Welte <laforge@gnumonks.org>
++ * All rights reserved.
++ *
++ * inspired by corkgbd.c by Richard Purdie
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/interrupt.h>
++#include <linux/jiffies.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/workqueue.h>
++
++#include <asm/gpio.h>
++#include <asm/mach-types.h>
++
++struct m800kbd {
++	struct input_dev *input;
++	unsigned int suspended;
++	struct work_struct work;
++	int work_in_progress;
++	int hp_irq_count_in_work;
++	int hp_irq_count;
++	int jack_irq;
++};
++
++static irqreturn_t m800kbd_power_irq(int irq, void *dev_id)
++{
++	struct m800kbd *m800kbd_data = dev_id;
++	int key_pressed = !gpio_get_value(irq_to_gpio(irq));
++
++	input_report_key(m800kbd_data->input, KEY_POWER, key_pressed);
++	input_sync(m800kbd_data->input);
++
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t m800kbd_cam_irq(int irq, void *dev_id)
++{
++	struct m800kbd *m800kbd_data = dev_id;
++
++	int key_pressed = !gpio_get_value(irq_to_gpio(irq));
++	input_report_key(m800kbd_data->input, KEY_CAMERA, key_pressed);
++	input_sync(m800kbd_data->input);
++
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t m800kbd_rec_irq(int irq, void *dev_id)
++{
++	struct m800kbd *m800kbd_data = dev_id;
++
++	int key_pressed = !gpio_get_value(irq_to_gpio(irq));
++	input_report_key(m800kbd_data->input, KEY_RECORD, key_pressed);
++	input_sync(m800kbd_data->input);
++
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t m800kbd_slide_irq(int irq, void *dev_id)
++{
++	struct m800kbd *m800kbd_data = dev_id;
++
++	int key_pressed = gpio_get_value(irq_to_gpio(irq));
++	input_report_key(m800kbd_data->input, SW_LID, key_pressed);
++	input_sync(m800kbd_data->input);
++
++	return IRQ_HANDLED;
++}
++
++#if 0
++static void m800kbd_debounce_jack(struct work_struct *work)
++{
++	struct m800kbd *kbd = container_of(work, struct m800kbd, work);
++	unsigned long flags;
++	int loop = 0;
++
++	do {
++		/*
++		 * we wait out any multiple interrupt
++		 * stuttering in 100ms lumps
++		 */
++		do {
++			kbd->hp_irq_count_in_work = kbd->hp_irq_count;
++			msleep(100);
++		} while (kbd->hp_irq_count != kbd->hp_irq_count_in_work);
++		/*
++		 * no new interrupts on jack for 100ms...
++		 * ok we will report it
++		 */
++		input_report_switch(kbd->input, SW_HEADPHONE_INSERT,
++				    gpio_get_value(irq_to_gpio(kbd->jack_irq)));
++		input_sync(kbd->input);
++		/*
++		 * we go around the outer loop again if we detect that more
++		 * interrupts came while we are servicing here.  But we have
++		 * to sequence it carefully with interrupts off
++		 */
++		local_save_flags(flags);
++		/* no interrupts during this work means we can exit the work */
++		loop = !!(kbd->hp_irq_count != kbd->hp_irq_count_in_work);
++		if (!loop)
++			kbd->work_in_progress = 0;
++		local_irq_restore(flags);
++		/*
++		 * interrupt that comes here will either queue a new work action
++		 * since work_in_progress is cleared now, or be dealt with
++		 * when we loop.
++		 */
++	} while (loop);
++}
++
++
++static irqreturn_t m800kbd_headphone_irq(int irq, void *dev_id)
++{
++	struct m800kbd *m800kbd_data = dev_id;
++
++	/*
++	 * this interrupt is prone to bouncing and userspace doesn't like
++	 * to have to deal with that kind of thing.  So we do not accept
++	 * that a jack interrupt is equal to a jack event.  Instead we fire
++	 * some work on the first interrupt, and it hangs about in 100ms units
++	 * until no more interrupts come.  Then it accepts the state it finds
++	 * for jack insert and reports it once
++	 */
++
++	m800kbd_data->hp_irq_count++;
++	/*
++	 * the first interrupt we see for a while, we fire the work item
++	 * and record the interrupt count when we did that.  If more interrupts
++	 * come in the meanwhile, we can tell by the difference in that
++	 * stored count and hp_irq_count which increments every interrupt
++	 */
++	if (!m800kbd_data->work_in_progress) {
++		m800kbd_data->jack_irq = irq;
++		m800kbd_data->hp_irq_count_in_work =
++						m800kbd_data->hp_irq_count;
++		if (!schedule_work(&m800kbd_data->work))
++			printk(KERN_ERR
++				"Unable to schedule headphone debounce\n");
++		else
++			m800kbd_data->work_in_progress = 1;
++	}
++
++	return IRQ_HANDLED;
++}
++#endif
++
++#ifdef CONFIG_PM
++static int m800kbd_suspend(struct platform_device *dev, pm_message_t state)
++{
++	struct m800kbd *m800kbd = platform_get_drvdata(dev);
++
++	m800kbd->suspended = 1;
++
++	return 0;
++}
++
++static int m800kbd_resume(struct platform_device *dev)
++{
++	struct m800kbd *m800kbd = platform_get_drvdata(dev);
++
++	m800kbd->suspended = 0;
++
++	return 0;
++}
++#else
++#define m800kbd_suspend	NULL
++#define m800kbd_resume	NULL
++#endif
++
++static int m800kbd_probe(struct platform_device *pdev)
++{
++	struct m800kbd *m800kbd;
++	struct input_dev *input_dev;
++	int rc, irq_power, irq_cam, irq_rec, irq_slide;
++
++	m800kbd = kzalloc(sizeof(struct m800kbd), GFP_KERNEL);
++	input_dev = input_allocate_device();
++	if (!m800kbd || !input_dev) {
++		kfree(m800kbd);
++		input_free_device(input_dev);
++		return -ENOMEM;
++	}
++
++	if (pdev->resource[0].flags != 0)
++		return -EINVAL;
++
++	irq_power = gpio_to_irq(pdev->resource[0].start);
++	if (irq_power < 0)
++		return -EINVAL;
++
++	irq_cam = gpio_to_irq(pdev->resource[1].start);
++	if (irq_cam < 0)
++		return -EINVAL;
++
++	irq_rec = gpio_to_irq(pdev->resource[2].start);
++	if (irq_rec < 0)
++		return -EINVAL;
++
++	irq_slide = gpio_to_irq(pdev->resource[3].start);
++	if (irq_slide < 0)
++		return -EINVAL;
++
++	platform_set_drvdata(pdev, m800kbd);
++
++	m800kbd->input = input_dev;
++
++	//INIT_WORK(&m800kbd->work, m800kbd_debounce_jack);
++
++	input_dev->name = "M800 Buttons";
++	input_dev->phys = "m800kbd/input0";
++	input_dev->id.bustype = BUS_HOST;
++	input_dev->id.vendor = 0x0001;
++	input_dev->id.product = 0x0001;
++	input_dev->id.version = 0x0100;
++	input_dev->cdev.dev = &pdev->dev;
++	input_dev->private = m800kbd;
++
++	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_SW);
++	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
++	set_bit(SW_LID, input_dev->swbit);
++	set_bit(KEY_POWER, input_dev->keybit);
++	set_bit(KEY_CAMERA, input_dev->keybit);
++	set_bit(KEY_RECORD, input_dev->keybit);
++
++	rc = input_register_device(m800kbd->input);
++	if (rc)
++		goto out_register;
++
++	if (request_irq(irq_power, m800kbd_power_irq, IRQF_DISABLED |
++			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
++			"M800 Power button", m800kbd)) {
++		dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_power);
++		goto out_aux;
++	}
++
++	enable_irq_wake(irq_power);
++
++	if (request_irq(irq_cam, m800kbd_cam_irq, IRQF_DISABLED |
++			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
++			"M800 Camera button", m800kbd)) {
++		dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_cam);
++		goto out_hold;
++	}
++
++	if (request_irq(irq_rec, m800kbd_rec_irq, IRQF_DISABLED |
++			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
++			"M800 Record button", m800kbd)) {
++		dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_rec);
++		goto out_hold;
++	}
++
++	if (request_irq(irq_slide, m800kbd_slide_irq, IRQF_DISABLED |
++			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
++			"M800 Slide", m800kbd)) {
++		dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_slide);
++		goto out_jack;
++	}
++	enable_irq_wake(irq_slide);
++
++	return 0;
++
++out_jack:
++	free_irq(irq_cam, m800kbd);
++out_hold:
++	free_irq(irq_power, m800kbd);
++out_aux:
++	input_unregister_device(m800kbd->input);
++out_register:
++	input_free_device(m800kbd->input);
++	platform_set_drvdata(pdev, NULL);
++	kfree(m800kbd);
++
++	return -ENODEV;
++}
++
++static int m800kbd_remove(struct platform_device *pdev)
++{
++	struct m800kbd *m800kbd = platform_get_drvdata(pdev);
++
++	free_irq(gpio_to_irq(pdev->resource[2].start), m800kbd);
++	free_irq(gpio_to_irq(pdev->resource[1].start), m800kbd);
++	free_irq(gpio_to_irq(pdev->resource[0].start), m800kbd);
++
++	input_unregister_device(m800kbd->input);
++	input_free_device(m800kbd->input);
++	platform_set_drvdata(pdev, NULL);
++	kfree(m800kbd);
++
++	return 0;
++}
++
++static struct platform_driver m800kbd_driver = {
++	.probe		= m800kbd_probe,
++	.remove		= m800kbd_remove,
++	.suspend	= m800kbd_suspend,
++	.resume		= m800kbd_resume,
++	.driver		= {
++		.name	= "m800-button",
++	},
++};
++
++static int __devinit m800kbd_init(void)
++{
++	return platform_driver_register(&m800kbd_driver);
++}
++
++static void __exit m800kbd_exit(void)
++{
++	platform_driver_unregister(&m800kbd_driver);
++}
++
++module_init(m800kbd_init);
++module_exit(m800kbd_exit);
++
++MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
++MODULE_DESCRIPTION("E-TEN glofiish M800 GPIO buttons input driver");
++MODULE_LICENSE("GPL");
+diff --git a/include/asm-arm/arch-s3c2410/glofiish.h b/include/asm-arm/arch-s3c2410/glofiish.h
+new file mode 100644
+index 0000000..1d0586f
+--- /dev/null
++++ b/include/asm-arm/arch-s3c2410/glofiish.h
+@@ -0,0 +1,39 @@
++#ifndef _GLOFIISH_H
++#define _GLOFIISH_H
++
++#include <asm/arch/regs-gpio.h>
++
++#define M800_GPIO_USB_PULLUP	S3C2410_GPA21
++
++#define M800_GPIO_BACKLIGHT	S3C2410_GPB0
++#define M800_GPIO_KBDLIGHT	S3C2410_GPB1
++#define M800_GPIO_GPS_POWER	S3C2410_GPB6
++
++#define M800_GPIO_BT_POWER_1	S3C2410_GPC8
++#define M800_GPIO_BT_POWER_2	S3C2410_GPC9
++
++#define M800_GPIO_nKEY_POWER	S3C2410_GPF0
++#define M800_GPIO_CPLD		S3C2410_GPF2
++#define M800_GPIO_USB_ATTACH	S3C2410_GPF3
++#define M800_GPIO_WIFI_1	S3C2410_GPF5
++#define M800_GPIO_WIFI_2	S3C2410_GPF7
++
++#define M800_GPIO_FMRADIO	S3C2410_GPG0
++#define M800_GPIO_nKEY_CAMERA	S3C2410_GPG2
++#define M800_GPIO_nKEY_RECORD	S3C2410_GPG4
++#define M800_GPIO_SLIDE		S3C2410_GPG6
++#define M800_GPIO_nSD_DETECT	S3C2410_GPG7
++
++#define M800_IRQ_nKEY_POWER	IRQ_EINT0
++#define M800_IRQ_CPLD_KEY	IRQ_EINT2
++#define M800_IRQ_USB_ATTACH	IRQ_EINT3
++#define M800_IRQ_WIFI_1		IRQ_EINT5
++#define M800_IRQ_WIFI_2		IRQ_EINT7
++#define M800_IRQ_FMRADIO	IRQ_EINT8
++#define M800_IRQ_nKEY_CAMERA	IRQ_EINT10
++#define M800_IRQ_nKEY_RECORD	IRQ_EINT12
++#define M800_IRQ_CAPSENSE	IRQ_EINT13
++#define M800_IRQ_KBD_SLIDE	IRQ_EINT14
++#define M800_IRQ_nSD_DETECT	IRQ_EINT15
++
++#endif
+-- 
+1.5.6.5
+