realtek: update the tree to the latest refactored version

* rename the target to realtek
* add refactored DSA driver
* add latest gpio driver
* lots of arch cleanups
* new irq driver
* additional boards

Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 0 insertions, 148 deletions

diff --git a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-10p.dts
deleted file mode 100644
index 9987316c21..0000000000
--- a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-10p.dts
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc";
-	model = "D-Link DGS-1210-10P";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			// GPIO 24 seems to provide power to the leds
-			label = "green:power";
-			gpios = <&gpio0 47 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		mode {
-			label = "reset";
-			gpios = <&gpio0 94 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-
-&gpio0 {
-	indirect-access-bus-id = <0>;
-};
-
-&spi0 {
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000000 0x80000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "u-boot-env";
-				reg = <0x00080000 0x40000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "u-boot-env2";
-				reg = <0x000c0000 0x40000>;
-				read-only;
-			};
-			partition@280000 {
-				label = "firmware";
-				compatible = "denx,uimage";
-				reg = <0x00100000 0xd80000>;
-			};
-			partition@be80000 {
-				label = "kernel2";
-				reg = <0x00e80000 0x180000>;
-			};
-			partition@1000000 {
-				label = "sysinfo";
-				reg = <0x01000000 0x40000>;
-			};
-			partition@1040000 {
-				label = "rootfs2";
-				reg = <0x01040000 0xc00000>;
-			};
-			partition@1c40000 {
-				label = "jffs2";
-				reg = <0x01c40000 0x3c0000>;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-		INTERNAL_PHY(24)
-		INTERNAL_PHY(26)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-		SWITCH_PORT(24, 9, internal)
-		SWITCH_PORT(26, 10, internal)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};