aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/rockchip
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2021-12-21 21:54:32 +0100
committerDavid Bauer <mail@david-bauer.net>2021-12-27 03:13:36 +0100
commite1780de5ceba07c40b05834f2ca65654fc48da80 (patch)
treec93fc57bfdab50dce2a92115c10017b339f8efc5 /target/linux/rockchip
parent13f326de3adc9652ae042a40a17e0cd0c7a302f0 (diff)
downloadupstream-e1780de5ceba07c40b05834f2ca65654fc48da80.tar.gz
upstream-e1780de5ceba07c40b05834f2ca65654fc48da80.tar.bz2
upstream-e1780de5ceba07c40b05834f2ca65654fc48da80.zip
rockchip: remove Kernel 5.4
As v5.10 is the default kernel version now, the files for v5.4 can be dropped. Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/rockchip')
-rw-r--r--target/linux/rockchip/armv8/config-5.4628
-rw-r--r--target/linux/rockchip/patches-5.4/001-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch404
-rw-r--r--target/linux/rockchip/patches-5.4/004-arm64-dts-rockchip-Add-txpbl-node-for-RK3399-RK3328.patch54
-rw-r--r--target/linux/rockchip/patches-5.4/005-rockchip-rk3328-add-compatible-to-NanoPi-R2S-etherne.patch25
-rw-r--r--target/linux/rockchip/patches-5.4/006-rockchip-rk3328-fix-NanoPi-R2S-GMAC-clock-name.patch27
-rw-r--r--target/linux/rockchip/patches-5.4/007-v5.13-rockchip-rk3399-Add-support-for-FriendlyARM-NanoPi-R.patch177
-rw-r--r--target/linux/rockchip/patches-5.4/008-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch31
-rw-r--r--target/linux/rockchip/patches-5.4/100-rockchip-use-system-LED-for-OpenWrt.patch31
-rw-r--r--target/linux/rockchip/patches-5.4/101-dts-rockchip-add-usb3-controller-node-for-RK3328-SoCs.patch62
-rw-r--r--target/linux/rockchip/patches-5.4/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch60
-rw-r--r--target/linux/rockchip/patches-5.4/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch28
-rw-r--r--target/linux/rockchip/patches-5.4/104-rockchip-use-USB-host-by-default-on-rk3399-rock-pi-4.patch32
12 files changed, 0 insertions, 1559 deletions
diff --git a/target/linux/rockchip/armv8/config-5.4 b/target/linux/rockchip/armv8/config-5.4
deleted file mode 100644
index d97329ccbc..0000000000
--- a/target/linux/rockchip/armv8/config-5.4
+++ /dev/null
@@ -1,628 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=33
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_ROCKCHIP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARC_EMAC_CORE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CNP=y
-CONFIG_ARM64_CONT_SHIFT=4
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_ERRATUM_845719=y
-CONFIG_ARM64_ERRATUM_858921=y
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_LSE_ATOMICS=y
-CONFIG_ARM64_MODULE_PLTS=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_RAS_EXTN=y
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-# CONFIG_ARM64_SW_TTBR0_PAN is not set
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=48
-# CONFIG_ARM64_VA_BITS_39 is not set
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_ARM64_VHE=y
-CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
-# CONFIG_ARMV8_DEPRECATED is not set
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_MHU=y
-CONFIG_ARM_PSCI_CPUIDLE=y
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-CONFIG_ARM_SCPI_CPUFREQ=y
-CONFIG_ARM_SCPI_POWER_DOMAIN=y
-CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_ARM_SMMU=y
-CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
-CONFIG_ARM_SMMU_V3=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GPIO=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BLOCK_COMPAT=y
-CONFIG_BRCMSTB_GISB_ARB=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_CHARGER_GPIO=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=5
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_RK808=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_COMPAT=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_COMPAT_BINFMT_ELF=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-CONFIG_COMPAT_OLD_SIGACTION=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_ISOLATION=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRASH_DUMP=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEVFREQ_GOV_PASSIVE is not set
-CONFIG_DEVFREQ_GOV_PERFORMANCE=y
-CONFIG_DEVFREQ_GOV_POWERSAVE=y
-CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-# CONFIG_DEVFREQ_THERMAL is not set
-CONFIG_DEVMEM=y
-# CONFIG_DEVPORT is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DNOTIFY=y
-CONFIG_DRM_RCAR_WRITEBACK=y
-# CONFIG_DRM_ROCKCHIP is not set
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DWMAC_DWC_QOS_ETH=y
-CONFIG_DWMAC_GENERIC=y
-CONFIG_DWMAC_ROCKCHIP=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EMAC_ROCKCHIP=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_ENERGY_MODEL=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_FORTIFY_SOURCE is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DWAPB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-# CONFIG_HARDENED_USERCOPY is not set
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_HWMON=y
-CONFIG_HWSPINLOCK=y
-CONFIG_HW_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_RK3X=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INDIRECT_PIO=y
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_LEDS=y
-CONFIG_INPUT_MATRIXKMAP=y
-# CONFIG_INPUT_MISC is not set
-# CONFIG_INPUT_RK805_PWRKEY is not set
-CONFIG_IOMMU_API=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
-CONFIG_IOMMU_DMA=y
-CONFIG_IOMMU_IOVA=y
-CONFIG_IOMMU_IO_PGTABLE=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-CONFIG_IOMMU_IO_PGTABLE_LPAE=y
-# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
-CONFIG_IOMMU_SUPPORT=y
-# CONFIG_IO_STRICT_DEVMEM is not set
-CONFIG_IO_URING=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MSI_IOMMU=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JUMP_LABEL=y
-CONFIG_KALLSYMS=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEXEC_FILE=y
-# CONFIG_KEXEC_SIG is not set
-CONFIG_KSM=y
-# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_PANIC=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_LIBCRC32C=y
-CONFIG_LIBFDT=y
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAGIC_SYSRQ_SERIAL=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MDIO_BUS_MUX_GPIO=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_RK808=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_DW=y
-# CONFIG_MMC_DW_BLUEFIELD is not set
-# CONFIG_MMC_DW_EXYNOS is not set
-# CONFIG_MMC_DW_HI3798CV200 is not set
-# CONFIG_MMC_DW_K3 is not set
-# CONFIG_MMC_DW_PCI is not set
-CONFIG_MMC_DW_PLTFM=y
-CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF_ARASAN=y
-CONFIG_MMC_SDHCI_OF_DWCMSHC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MQ_IOSCHED_DEADLINE=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=256
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_NVME_CORE=y
-# CONFIG_NVME_MULTIPATH is not set
-# CONFIG_NVME_TCP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IOMMU=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_OVERLAY=y
-CONFIG_OF_RESOLVE=y
-CONFIG_OLD_SIGSUSPEND3=y
-# CONFIG_OVERLAY_FS_XINO_AUTO is not set
-CONFIG_PADATA=y
-CONFIG_PAGE_POOL=y
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCIE_ROCKCHIP=y
-CONFIG_PCIE_ROCKCHIP_HOST=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_STUB=y
-CONFIG_PGTABLE_LEVELS=4
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_ROCKCHIP_DP=y
-CONFIG_PHY_ROCKCHIP_EMMC=y
-# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
-CONFIG_PHY_ROCKCHIP_INNO_USB2=y
-CONFIG_PHY_ROCKCHIP_PCIE=y
-CONFIG_PHY_ROCKCHIP_TYPEC=y
-CONFIG_PHY_ROCKCHIP_USB=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_RK805 is not set
-CONFIG_PINCTRL_ROCKCHIP=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PL330_DMA=y
-CONFIG_PLATFORM_MHU=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_DEVFREQ=y
-# CONFIG_PM_DEVFREQ_EVENT is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_OPP=y
-CONFIG_POWER_AVS=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_SUPPLY_HWMON=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPTION=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PROC_VMCORE=y
-CONFIG_PWM=y
-CONFIG_PWM_ROCKCHIP=y
-CONFIG_PWM_SYSFS=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_QUOTA=y
-CONFIG_QUOTACTL=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_RAID_ATTRS=y
-CONFIG_RANDOMIZE_BASE=y
-CONFIG_RANDOMIZE_MODULE_REGION_FULL=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_RCU_TRACE=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_PWM=y
-CONFIG_REGULATOR_RK808=y
-CONFIG_RELOCATABLE=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_ROCKCHIP_EFUSE=y
-CONFIG_ROCKCHIP_GRF=y
-CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ROCKCHIP_IOMMU=y
-CONFIG_ROCKCHIP_MBOX=y
-CONFIG_ROCKCHIP_PHY=y
-CONFIG_ROCKCHIP_PM_DOMAINS=y
-# CONFIG_ROCKCHIP_SARADC is not set
-CONFIG_ROCKCHIP_THERMAL=y
-CONFIG_ROCKCHIP_TIMER=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RSEQ=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RK808=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_NVMEM=y
-# CONFIG_RUNTIME_TESTING_MENU is not set
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCHED_MC=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS=y
-# CONFIG_SECURITY_DMESG_RESTRICT is not set
-CONFIG_SENSORS_ARM_SCPI=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_EXAR=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SG_POOL=y
-CONFIG_SIMPLE_PM_BUS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SMP=y
-# CONFIG_SND_SOC_ROCKCHIP is not set
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_DYNAMIC=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_ROCKCHIP=y
-CONFIG_SPI_SPIDEV=y
-# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
-CONFIG_SQUASHFS_DECOMP_SINGLE=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FILE_CACHE=y
-# CONFIG_SQUASHFS_FILE_DIRECT is not set
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-CONFIG_STACKPROTECTOR=y
-CONFIG_STACKPROTECTOR_STRONG=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STMMAC_SELFTESTS is not set
-CONFIG_STRICT_DEVMEM=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_SWAP is not set
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-# CONFIG_TEXTSEARCH is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_EMULATION=y
-CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TRACE_CLOCK=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
-CONFIG_TREE_SRCU=y
-CONFIG_TYPEC=y
-# CONFIG_TYPEC_DP_ALTMODE is not set
-CONFIG_TYPEC_FUSB302=y
-# CONFIG_TYPEC_MUX_PI3USB30532 is not set
-# CONFIG_TYPEC_TCPCI is not set
-CONFIG_TYPEC_TCPM=y
-# CONFIG_TYPEC_TPS6598X is not set
-# CONFIG_UCLAMP_TASK is not set
-# CONFIG_UEVENT_HELPER is not set
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_HOST=y
-CONFIG_USB_DWC3_OF_SIMPLE=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_HID=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_PHY=y
-CONFIG_USB_ROLE_SWITCH=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_ULPI_BUS=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PLATFORM=y
-# CONFIG_VIRTIO_MENU is not set
-CONFIG_VMAP_STACK=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_WATCHDOG is not set
-CONFIG_XARRAY_MULTI=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/rockchip/patches-5.4/001-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch b/target/linux/rockchip/patches-5.4/001-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch
deleted file mode 100644
index 69ee8a7c3a..0000000000
--- a/target/linux/rockchip/patches-5.4/001-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch
+++ /dev/null
@@ -1,404 +0,0 @@
-From 0720be5371c806c1b89936984a321248fa739bea Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Fri, 10 Jul 2020 15:57:46 +0200
-Subject: [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi R2S
-
-This adds support for the NanoPi R2S from FriendlyARM.
-
-Rockchip RK3328 SoC
-1GB DDR4 RAM
-Gigabit Ethernet (WAN)
-Gigabit Ethernet (USB3) (LAN)
-USB 2.0 Host Port
-MicroSD slot
-Reset button
-WAN - LAN - SYS LED
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/arm64/boot/dts/rockchip/Makefile | 1 +
- .../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 368 ++++++++++++++++++
- 2 files changed, 369 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -0,0 +1,368 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
-+ */
-+
-+/dts-v1/;
-+
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/gpio/gpio.h>
-+#include "rk3328.dtsi"
-+
-+/ {
-+ model = "FriendlyElec NanoPi R2S";
-+ compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
-+
-+ chosen {
-+ stdout-path = "serial2:1500000n8";
-+ };
-+
-+ gmac_clk: gmac-clock {
-+ compatible = "fixed-clock";
-+ clock-frequency = <125000000>;
-+ clock-output-names = "gmac_clk";
-+ #clock-cells = <0>;
-+ };
-+
-+ keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&reset_button_pin>;
-+ pinctrl-names = "default";
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ debounce-interval = <50>;
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
-+ pinctrl-names = "default";
-+
-+ lan_led: led-0 {
-+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
-+ label = "nanopi-r2s:green:lan";
-+ };
-+
-+ sys_led: led-1 {
-+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-+ label = "nanopi-r2s:red:sys";
-+ };
-+
-+ wan_led: led-2 {
-+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
-+ label = "nanopi-r2s:green:wan";
-+ };
-+ };
-+
-+ vcc_io_sdio: sdmmcio-regulator {
-+ compatible = "regulator-gpio";
-+ enable-active-high;
-+ gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&sdio_vcc_pin>;
-+ pinctrl-names = "default";
-+ regulator-name = "vcc_io_sdio";
-+ regulator-always-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-settling-time-us = <5000>;
-+ regulator-type = "voltage";
-+ startup-delay-us = <2000>;
-+ states = <1800000 0x1
-+ 3300000 0x0>;
-+ vin-supply = <&vcc_io_33>;
-+ };
-+
-+ vcc_sd: sdmmc-regulator {
-+ compatible = "regulator-fixed";
-+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
-+ pinctrl-0 = <&sdmmc0m1_gpio>;
-+ pinctrl-names = "default";
-+ regulator-name = "vcc_sd";
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vcc_io_33>;
-+ };
-+
-+ vdd_5v: vdd-5v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vdd_5v";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <&vdd_arm>;
-+};
-+
-+&cpu1 {
-+ cpu-supply = <&vdd_arm>;
-+};
-+
-+&cpu2 {
-+ cpu-supply = <&vdd_arm>;
-+};
-+
-+&cpu3 {
-+ cpu-supply = <&vdd_arm>;
-+};
-+
-+&gmac2io {
-+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
-+ assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
-+ clock_in_out = "input";
-+ phy-handle = <&rtl8211e>;
-+ phy-mode = "rgmii";
-+ phy-supply = <&vcc_io_33>;
-+ pinctrl-0 = <&rgmiim1_pins>;
-+ pinctrl-names = "default";
-+ rx_delay = <0x18>;
-+ snps,aal;
-+ tx_delay = <0x24>;
-+ status = "okay";
-+
-+ mdio {
-+ compatible = "snps,dwmac-mdio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rtl8211e: ethernet-phy@1 {
-+ reg = <1>;
-+ pinctrl-0 = <&eth_phy_reset_pin>;
-+ pinctrl-names = "default";
-+ reset-assert-us = <10000>;
-+ reset-deassert-us = <50000>;
-+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&i2c1 {
-+ status = "okay";
-+
-+ rk805: pmic@18 {
-+ compatible = "rockchip,rk805";
-+ reg = <0x18>;
-+ interrupt-parent = <&gpio1>;
-+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-+ #clock-cells = <1>;
-+ clock-output-names = "xin32k", "rk805-clkout2";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ pinctrl-0 = <&pmic_int_l>;
-+ pinctrl-names = "default";
-+ rockchip,system-power-controller;
-+ wakeup-source;
-+
-+ vcc1-supply = <&vdd_5v>;
-+ vcc2-supply = <&vdd_5v>;
-+ vcc3-supply = <&vdd_5v>;
-+ vcc4-supply = <&vdd_5v>;
-+ vcc5-supply = <&vcc_io_33>;
-+ vcc6-supply = <&vdd_5v>;
-+
-+ regulators {
-+ vdd_log: DCDC_REG1 {
-+ regulator-name = "vdd_log";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <712500>;
-+ regulator-max-microvolt = <1450000>;
-+ regulator-ramp-delay = <12500>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1000000>;
-+ };
-+ };
-+
-+ vdd_arm: DCDC_REG2 {
-+ regulator-name = "vdd_arm";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <712500>;
-+ regulator-max-microvolt = <1450000>;
-+ regulator-ramp-delay = <12500>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <950000>;
-+ };
-+ };
-+
-+ vcc_ddr: DCDC_REG3 {
-+ regulator-name = "vcc_ddr";
-+ regulator-always-on;
-+ regulator-boot-on;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ };
-+ };
-+
-+ vcc_io_33: DCDC_REG4 {
-+ regulator-name = "vcc_io_33";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <3300000>;
-+ };
-+ };
-+
-+ vcc_18: LDO_REG1 {
-+ regulator-name = "vcc_18";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1800000>;
-+ };
-+ };
-+
-+ vcc18_emmc: LDO_REG2 {
-+ regulator-name = "vcc18_emmc";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1800000>;
-+ };
-+ };
-+
-+ vdd_10: LDO_REG3 {
-+ regulator-name = "vdd_10";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1000000>;
-+ };
-+ };
-+ };
-+ };
-+};
-+
-+&io_domains {
-+ pmuio-supply = <&vcc_io_33>;
-+ vccio1-supply = <&vcc_io_33>;
-+ vccio2-supply = <&vcc18_emmc>;
-+ vccio3-supply = <&vcc_io_sdio>;
-+ vccio4-supply = <&vcc_18>;
-+ vccio5-supply = <&vcc_io_33>;
-+ vccio6-supply = <&vcc_io_33>;
-+ status = "okay";
-+};
-+
-+&pinctrl {
-+ button {
-+ reset_button_pin: reset-button-pin {
-+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ ethernet-phy {
-+ eth_phy_reset_pin: eth-phy-reset-pin {
-+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-+ };
-+ };
-+
-+ leds {
-+ lan_led_pin: lan-led-pin {
-+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ sys_led_pin: sys-led-pin {
-+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ wan_led_pin: wan-led-pin {
-+ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ pmic {
-+ pmic_int_l: pmic-int-l {
-+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ sd {
-+ sdio_vcc_pin: sdio-vcc-pin {
-+ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+};
-+
-+&pwm2 {
-+ status = "okay";
-+};
-+
-+&sdmmc {
-+ bus-width = <4>;
-+ cap-sd-highspeed;
-+ disable-wp;
-+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
-+ pinctrl-names = "default";
-+ sd-uhs-sdr12;
-+ sd-uhs-sdr25;
-+ sd-uhs-sdr50;
-+ sd-uhs-sdr104;
-+ vmmc-supply = <&vcc_sd>;
-+ vqmmc-supply = <&vcc_io_sdio>;
-+ status = "okay";
-+};
-+
-+&tsadc {
-+ rockchip,hw-tshut-mode = <0>;
-+ rockchip,hw-tshut-polarity = <0>;
-+ status = "okay";
-+};
-+
-+&u2phy {
-+ status = "okay";
-+};
-+
-+&u2phy_host {
-+ status = "okay";
-+};
-+
-+&u2phy_otg {
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ status = "okay";
-+};
-+
-+&usb20_otg {
-+ status = "okay";
-+ dr_mode = "host";
-+};
-+
-+&usb_host0_ehci {
-+ status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+ status = "okay";
-+};
diff --git a/target/linux/rockchip/patches-5.4/004-arm64-dts-rockchip-Add-txpbl-node-for-RK3399-RK3328.patch b/target/linux/rockchip/patches-5.4/004-arm64-dts-rockchip-Add-txpbl-node-for-RK3399-RK3328.patch
deleted file mode 100644
index 83ce8f1efb..0000000000
--- a/target/linux/rockchip/patches-5.4/004-arm64-dts-rockchip-Add-txpbl-node-for-RK3399-RK3328.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 8a469ee35606ba65448d54e5a2a23302f7e79e3c Mon Sep 17 00:00:00 2001
-From: Carlos de Paula <me@carlosedp.com>
-Date: Tue, 18 Feb 2020 17:10:37 -0500
-Subject: [PATCH] arm64: dts: rockchip: Add txpbl node for RK3399/RK3328
-
-Some rockchip SoCs like the RK3399 and RK3328 exhibit an issue
-where tx checksumming does not work with packets larger than 1498.
-
-The default Programmable Buffer Length for TX in these GMAC's is
-not suitable for MTUs higher than 1498. The workaround is to disable
-TX offloading with 'ethtool -K eth0 tx off rx off' causing performance
-impacts as it disables hardware checksumming.
-
-This patch sets snps,txpbl to 0x4 which is a safe number tested ok for
-the most popular MTU value of 1500.
-
-For reference, see https://lkml.org/lkml/2019/4/1/1382.
-
-Signed-off-by: Carlos de Paula <me@carlosedp.com>
-Link: https://lore.kernel.org/r/20200218221040.10955-1-me@carlosedp.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 ++
- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 +
- 2 files changed, 3 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
-@@ -857,6 +857,7 @@
- resets = <&cru SRST_GMAC2IO_A>;
- reset-names = "stmmaceth";
- rockchip,grf = <&grf>;
-+ snps,txpbl = <0x4>;
- status = "disabled";
- };
-
-@@ -878,6 +879,7 @@
- reset-names = "stmmaceth", "mac-phy";
- phy-mode = "rmii";
- phy-handle = <&phy>;
-+ snps,txpbl = <0x4>;
- status = "disabled";
-
- mdio {
---- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
-@@ -291,6 +291,7 @@
- resets = <&cru SRST_A_GMAC>;
- reset-names = "stmmaceth";
- rockchip,grf = <&grf>;
-+ snps,txpbl = <0x4>;
- status = "disabled";
- };
-
diff --git a/target/linux/rockchip/patches-5.4/005-rockchip-rk3328-add-compatible-to-NanoPi-R2S-etherne.patch b/target/linux/rockchip/patches-5.4/005-rockchip-rk3328-add-compatible-to-NanoPi-R2S-etherne.patch
deleted file mode 100644
index 897a42fea2..0000000000
--- a/target/linux/rockchip/patches-5.4/005-rockchip-rk3328-add-compatible-to-NanoPi-R2S-etherne.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From bc6c96d850419e71dbc9b0094ccc9b668ba9be43 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Mon, 28 Sep 2020 22:54:52 +0200
-Subject: [PATCH] rockchip: rk3328: add compatible to NanoPi R2S ethernet PHY
-
-This adds the compatible property to the NanoPi R2S ethernet PHY node.
-Otherwise, the PHY might not be probed, as the PHY ID reads all 0xff
-when it is still in reset.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -134,6 +134,8 @@
- #size-cells = <0>;
-
- rtl8211e: ethernet-phy@1 {
-+ compatible = "ethernet-phy-id001c.c915",
-+ "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- pinctrl-0 = <&eth_phy_reset_pin>;
- pinctrl-names = "default";
diff --git a/target/linux/rockchip/patches-5.4/006-rockchip-rk3328-fix-NanoPi-R2S-GMAC-clock-name.patch b/target/linux/rockchip/patches-5.4/006-rockchip-rk3328-fix-NanoPi-R2S-GMAC-clock-name.patch
deleted file mode 100644
index 15c8ad71a6..0000000000
--- a/target/linux/rockchip/patches-5.4/006-rockchip-rk3328-fix-NanoPi-R2S-GMAC-clock-name.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From f2962ed3805c5b74948d00e4e6fbb33388261ba8 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 4 Oct 2020 16:43:29 +0200
-Subject: [PATCH] rockchip: rk3328: fix NanoPi R2S GMAC clock name
-
-This commit fixes the name for the GMAC clock to gmac_clkin, as this is
-the name of the clock provided by the rk3328-clk driver.
-
-Without this commit, the GMAC will not work in TX direction.
-
-Suggested-by: Tobias Waldvogel <tobias.waldvogel@gmail.com>
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -20,7 +20,7 @@
- gmac_clk: gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
-- clock-output-names = "gmac_clk";
-+ clock-output-names = "gmac_clkin";
- #clock-cells = <0>;
- };
-
diff --git a/target/linux/rockchip/patches-5.4/007-v5.13-rockchip-rk3399-Add-support-for-FriendlyARM-NanoPi-R.patch b/target/linux/rockchip/patches-5.4/007-v5.13-rockchip-rk3399-Add-support-for-FriendlyARM-NanoPi-R.patch
deleted file mode 100644
index c508d71317..0000000000
--- a/target/linux/rockchip/patches-5.4/007-v5.13-rockchip-rk3399-Add-support-for-FriendlyARM-NanoPi-R.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-From db792e9adbf85ffc9d6b0b060ac3c8e3148c8992 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Fri, 19 Mar 2021 13:16:27 +0800
-Subject: [PATCH] rockchip: rk3399: Add support for FriendlyARM NanoPi R4S
-
-This adds support for the NanoPi R4S from FriendlyArm.
-
-Rockchip RK3399 SoC
-1GB DDR3 or 4GB LPDDR4 RAM
-Gigabit Ethernet (WAN)
-Gigabit Ethernet (PCIe) (LAN)
-USB 3.0 Port x 2
-MicroSD slot
-Reset button
-WAN - LAN - SYS LED
-
-Co-developed-by: Jensen Huang <jensenhuang@friendlyarm.com>
-Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com>
-[minor adjustments]
-Co-developed-by: Marty Jones <mj8263788@gmail.com>
-Signed-off-by: Marty Jones <mj8263788@gmail.com>
-[further adjustments, fixed format issues]
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
-Link: https://lore.kernel.org/r/20210319051627.814-2-cnsztl@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile | 1 +
- .../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 133 +++++++++++++++++++++
- 2 files changed, 134 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -25,6 +25,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-le
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-@@ -0,0 +1,133 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * FriendlyElec NanoPC-T4 board device tree source
-+ *
-+ * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
-+ * (http://www.friendlyarm.com)
-+ *
-+ * Copyright (c) 2018 Collabora Ltd.
-+ *
-+ * Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com>
-+ * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com>
-+ * Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com>
-+ */
-+
-+/dts-v1/;
-+#include "rk3399-nanopi4.dtsi"
-+
-+/ {
-+ model = "FriendlyElec NanoPi R4S";
-+ compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
-+
-+ /delete-node/ display-subsystem;
-+
-+ gpio-leds {
-+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
-+
-+ /delete-node/ status;
-+
-+ lan_led: led-lan {
-+ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
-+ label = "green:lan";
-+ };
-+
-+ sys_led: led-sys {
-+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-+ label = "red:sys";
-+ default-state = "on";
-+ };
-+
-+ wan_led: led-wan {
-+ gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-+ label = "green:wan";
-+ };
-+ };
-+
-+ gpio-keys {
-+ pinctrl-0 = <&reset_button_pin>;
-+
-+ /delete-node/ power;
-+
-+ reset {
-+ debounce-interval = <50>;
-+ gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
-+ label = "reset";
-+ linux,code = <KEY_RESTART>;
-+ };
-+ };
-+
-+ vdd_5v: vdd-5v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vdd_5v";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+};
-+
-+&emmc_phy {
-+ status = "disabled";
-+};
-+
-+&i2c4 {
-+ status = "disabled";
-+};
-+
-+&pcie0 {
-+ max-link-speed = <1>;
-+ num-lanes = <1>;
-+ vpcie3v3-supply = <&vcc3v3_sys>;
-+};
-+
-+&pinctrl {
-+ gpio-leds {
-+ /delete-node/ leds-gpio;
-+
-+ lan_led_pin: lan-led-pin {
-+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ sys_led_pin: sys-led-pin {
-+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ wan_led_pin: wan-led-pin {
-+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ rockchip-key {
-+ /delete-node/ power-key;
-+
-+ reset_button_pin: reset-button-pin {
-+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+};
-+
-+&sdhci {
-+ status = "disabled";
-+};
-+
-+&sdio0 {
-+ status = "disabled";
-+};
-+
-+&u2phy0_host {
-+ phy-supply = <&vdd_5v>;
-+};
-+
-+&u2phy1_host {
-+ status = "disabled";
-+};
-+
-+&uart0 {
-+ status = "disabled";
-+};
-+
-+&usbdrd_dwc3_0 {
-+ dr_mode = "host";
-+};
-+
-+&vcc3v3_sys {
-+ vin-supply = <&vcc5v0_sys>;
-+};
diff --git a/target/linux/rockchip/patches-5.4/008-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch b/target/linux/rockchip/patches-5.4/008-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch
deleted file mode 100644
index 792028b292..0000000000
--- a/target/linux/rockchip/patches-5.4/008-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From af20b3384e8723077cc6484160b0cf4e9be321de Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Mon, 7 Jun 2021 15:45:37 +0800
-Subject: [PATCH] arm64: dts: rockchip: add EEPROM node for NanoPi R4S
-
-NanoPi R4S has a EEPROM attached to the 2nd I2C bus (U92), which
-stores the MAC address.
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
----
- arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-@@ -68,6 +68,15 @@
- status = "disabled";
- };
-
-+&i2c2 {
-+ eeprom@51 {
-+ compatible = "microchip,24c02", "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ read-only; /* This holds our MAC */
-+ };
-+};
-+
- &i2c4 {
- status = "disabled";
- };
diff --git a/target/linux/rockchip/patches-5.4/100-rockchip-use-system-LED-for-OpenWrt.patch b/target/linux/rockchip/patches-5.4/100-rockchip-use-system-LED-for-OpenWrt.patch
deleted file mode 100644
index 7b3b50ffd8..0000000000
--- a/target/linux/rockchip/patches-5.4/100-rockchip-use-system-LED-for-OpenWrt.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 6731d2c9039fbe1ecf21915eab3acee0a999508a Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Fri, 10 Jul 2020 21:38:20 +0200
-Subject: [PATCH] rockchip: use system LED for OpenWrt
-
-Use the SYS LED on the casing for showing system status.
-
-This patch is kept separate from the NanoPi R2S support patch, as i plan
-on submitting the device support upstream.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -13,6 +13,13 @@
- model = "FriendlyElec NanoPi R2S";
- compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
-
-+ aliases {
-+ led-boot = &sys_led;
-+ led-failsafe = &sys_led;
-+ led-running = &sys_led;
-+ led-upgrade = &sys_led;
-+ };
-+
- chosen {
- stdout-path = "serial2:1500000n8";
- };
diff --git a/target/linux/rockchip/patches-5.4/101-dts-rockchip-add-usb3-controller-node-for-RK3328-SoCs.patch b/target/linux/rockchip/patches-5.4/101-dts-rockchip-add-usb3-controller-node-for-RK3328-SoCs.patch
deleted file mode 100644
index 2635c7a676..0000000000
--- a/target/linux/rockchip/patches-5.4/101-dts-rockchip-add-usb3-controller-node-for-RK3328-SoCs.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: William Wu <william.wu@rock-chips.com>
-
-RK3328 has one USB 3.0 OTG controller which uses DWC_USB3
-core's general architecture. It can act as static xHCI host
-controller, static device controller, USB 3.0/2.0 OTG basing
-on ID of USB3.0 PHY.
-
-Signed-off-by: William Wu <william.wu@rock-chips.com>
-Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com>
-
----
-
-NOTE: This binding still has issues. From the original thread:
-
-the rk3328 usb3-phy has an issue with detecting any plugin events
-after a previous device got removed - see the inno-usb3-phy driver
-in the vendor kernel.
-
-The current state is good-enough for enabling the USB3 attached LAN
-port of the NanoPi R2S. However, it might explode depending on your
-use-case. You've been warned.
-
----
- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 27 ++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
-@@ -938,6 +938,33 @@
- status = "disabled";
- };
-
-+ usbdrd3: usb@ff600000 {
-+ compatible = "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3";
-+ clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
-+ <&cru ACLK_USB3OTG>;
-+ clock-names = "ref_clk", "suspend_clk",
-+ "bus_clk";
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ ranges;
-+ status = "disabled";
-+
-+ usbdrd_dwc3: dwc3@ff600000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x0 0xff600000 0x0 0x100000>;
-+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-+ dr_mode = "otg";
-+ phy_type = "utmi_wide";
-+ snps,dis_enblslpm_quirk;
-+ snps,dis-u2-freeclk-exists-quirk;
-+ snps,dis_u2_susphy_quirk;
-+ snps,dis_u3_susphy_quirk;
-+ snps,dis-del-phy-power-chg-quirk;
-+ snps,dis-tx-ipgap-linecheck-quirk;
-+ status = "disabled";
-+ };
-+ };
-+
- gic: interrupt-controller@ff811000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
diff --git a/target/linux/rockchip/patches-5.4/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch b/target/linux/rockchip/patches-5.4/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch
deleted file mode 100644
index 243c1ac78d..0000000000
--- a/target/linux/rockchip/patches-5.4/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 0fc3b9b7619c4878f73a6a7989863f0d1a3fd392 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Fri, 10 Jul 2020 21:12:16 +0200
-Subject: [PATCH] rockchip: enabled LAN port on NanoPi R2S
-
-Enable the USB3 port on the FriendlyARM NanoPi R2S.
-This is required for the USB3 attached LAN port to work.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- .../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 27 +++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -44,6 +44,18 @@
- };
- };
-
-+ vcc_rtl8153: vcc-rtl8153-regulator {
-+ compatible = "regulator-fixed";
-+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&rtl8153_en_drv>;
-+ regulator-always-on;
-+ regulator-name = "vcc_rtl8153";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ enable-active-high;
-+ };
-+
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
-@@ -269,6 +281,12 @@
- };
- };
- };
-+
-+ usb {
-+ rtl8153_en_drv: rtl8153-en-drv {
-+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
- };
-
- &io_domains {
-@@ -375,3 +393,12 @@
- &usb_host0_ohci {
- status = "okay";
- };
-+
-+&usbdrd3 {
-+ status = "okay";
-+};
-+
-+&usbdrd_dwc3 {
-+ dr_mode = "host";
-+ status = "okay";
-+};
diff --git a/target/linux/rockchip/patches-5.4/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch b/target/linux/rockchip/patches-5.4/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch
deleted file mode 100644
index e318f3136f..0000000000
--- a/target/linux/rockchip/patches-5.4/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 2795c8b31a686bdb8338f9404d18ef7a154f0d75 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 13:32:59 +0200
-Subject: [PATCH] arm64: rockchip: add OF node for USB eth on NanoPi R2S
-
-This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
-NanoPi R2S. Add the correct value for the RTL8153 LED configuration
-register to match the blink behavior of the other port on the device.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -401,4 +401,11 @@
- &usbdrd_dwc3 {
- dr_mode = "host";
- status = "okay";
-+
-+ usb-eth@2 {
-+ compatible = "realtek,rtl8153";
-+ reg = <2>;
-+
-+ realtek,led-data = <0x87>;
-+ };
- };
diff --git a/target/linux/rockchip/patches-5.4/104-rockchip-use-USB-host-by-default-on-rk3399-rock-pi-4.patch b/target/linux/rockchip/patches-5.4/104-rockchip-use-USB-host-by-default-on-rk3399-rock-pi-4.patch
deleted file mode 100644
index 1abab5e2eb..0000000000
--- a/target/linux/rockchip/patches-5.4/104-rockchip-use-USB-host-by-default-on-rk3399-rock-pi-4.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From e12f67fe83446432ef16704c22ec23bd1dbcd094 Mon Sep 17 00:00:00 2001
-From: Vicente Bergas <vicencb@gmail.com>
-Date: Tue, 1 Dec 2020 16:41:32 +0100
-Subject: arm64: dts: rockchip: use USB host by default on rk3399-rock-pi-4
-
-Based on the board schematics at
-https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi_4c_v12_sch_20200620.pdf
-on page 19 there is an USB Type-A receptacle being used as an USB-OTG port.
-
-But the Type-A connector is not valid for OTG operation, for this reason
-there is a switch to select host or device role.
-This is non-compliant and error prone because switching is manual.
-So, use host mode as it corresponds for a Type-A receptacle.
-
-Signed-off-by: Vicente Bergas <vicencb@gmail.com>
-Link: https://lore.kernel.org/r/20201201154132.1286-4-vicencb@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
-@@ -684,7 +684,7 @@
-
- &usbdrd_dwc3_0 {
- status = "okay";
-- dr_mode = "otg";
-+ dr_mode = "host";
- };
-
- &usbdrd3_1 {