aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/realtek
diff options
context:
space:
mode:
authorRaylynn Knight <rayknight@me.com>2022-04-10 03:26:59 -0400
committerSander Vanheule <sander@svanheule.net>2022-05-07 17:23:45 +0200
commit580723e86ae53f14273ff8c3a0ebf5d15b4ce1f1 (patch)
treed5f6affb7c285daf5c168387539edbf191b67c55 /target/linux/realtek
parentd9fae43202f3d43cb199bd527cca8f170da70b7d (diff)
downloadupstream-580723e86ae53f14273ff8c3a0ebf5d15b4ce1f1.tar.gz
upstream-580723e86ae53f14273ff8c3a0ebf5d15b4ce1f1.tar.bz2
upstream-580723e86ae53f14273ff8c3a0ebf5d15b4ce1f1.zip
realtek: add support for ZyXEL GS1900-16
The ZyXEL GS1900-16 is a 16 port gigabit switch similar to other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-16 * SoC: Realtek RTL8382M 500 MHz MIPS 4KEc * Flash: 16 MiB Macronix MX25L12835F * RAM: 128 MiB DDR2 SDRAM Nanya NT5TU128M8HE * Ethernet: 16x 10/100/1000 Mbps * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 16 ethernet port link/activity LEDs (green, SoC controlled) * Buttons: 1 "RESET" button on front panel * Power 120-240V AC C13 * UART: 1 serial header (J12) with populated standard pin connector on the right back of the PCB. Pinout (front to back): + Pin 1 - VCC marked with white dot + Pin 2 - RX + Pin 3 - TX + PIn 4 - GND Serial connection parameters: 115200 8N1. Installation ------------ OEM upgrade method: * Log in to OEM management web interface * Navigate to Maintenance > Firmware * Select the HTTP radio button * Select the Active radio button * Use the browse button to locate the realtek-generic-zyxel_gs1900-16-initramfs-kernel.bin file amd select open so File Path is update with filename. * Select the Apply button. Screen will display "Prepare for firmware upgrade ...". *Wait until screen shows "Do you really want to reboot?" then select the OK button * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/realtek-generic-zyxel_gs1900-16-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. U-Boot TFTP method: * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-16 is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot from the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-16-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/openwrt-realtek-generic-zyxel_gs1900-16-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. Signed-off-by: Raylynn Knight <rayknight@me.com> [removed duplicate patch title, align RAM specification] Signed-off-by: Sander Vanheule <sander@svanheule.net>
Diffstat (limited to 'target/linux/realtek')
-rw-r--r--target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts36
-rw-r--r--target/linux/realtek/image/rtl838x.mk8
2 files changed, 44 insertions, 0 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts
new file mode 100644
index 0000000000..ac2eea7015
--- /dev/null
+++ b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-16.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "rtl8380_zyxel_gs1900.dtsi"
+
+/ {
+ compatible = "zyxel,gs1900-16", "realtek,rtl838x-soc";
+ model = "ZyXEL GS1900-16";
+};
+
+&mdio {
+ EXTERNAL_PHY(16)
+ EXTERNAL_PHY(17)
+ EXTERNAL_PHY(18)
+ EXTERNAL_PHY(19)
+ EXTERNAL_PHY(20)
+ EXTERNAL_PHY(21)
+ EXTERNAL_PHY(22)
+ EXTERNAL_PHY(23)
+};
+
+&switch0 {
+ ports {
+ SWITCH_PORT(16, 9, qsgmii)
+ SWITCH_PORT(17, 10, qsgmii)
+ SWITCH_PORT(18, 11, qsgmii)
+ SWITCH_PORT(19, 12, qsgmii)
+ SWITCH_PORT(20, 13, qsgmii)
+ SWITCH_PORT(21, 14, qsgmii)
+ SWITCH_PORT(22, 15, qsgmii)
+ SWITCH_PORT(23, 16, qsgmii)
+ };
+};
+
+&gpio1 {
+ /delete-node/ poe_enable;
+};
diff --git a/target/linux/realtek/image/rtl838x.mk b/target/linux/realtek/image/rtl838x.mk
index 29e7ff2695..e17dc8c62d 100644
--- a/target/linux/realtek/image/rtl838x.mk
+++ b/target/linux/realtek/image/rtl838x.mk
@@ -111,6 +111,14 @@ define Device/zyxel_gs1900-10hp
endef
TARGET_DEVICES += zyxel_gs1900-10hp
+define Device/zyxel_gs1900-16
+ $(Device/zyxel_gs1900)
+ SOC := rtl8382
+ DEVICE_MODEL := GS1900-16
+ ZYXEL_VERS := AAHJ
+endef
+TARGET_DEVICES += zyxel_gs1900-16
+
define Device/zyxel_gs1900-8
$(Device/zyxel_gs1900)
DEVICE_MODEL := GS1900-8