aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/realtek
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2021-09-03 18:58:09 +0900
committerSander Vanheule <sander@svanheule.net>2022-08-06 14:39:57 +0200
commitcef3f05a55a3a3e6d2e18aef5459dda78fc3e336 (patch)
tree2542c8428fd4b3ec252cbe44efc597e24f074bd7 /target/linux/realtek
parent4974ee7341ebf83579331fbe496a832cf7ed6c56 (diff)
downloadupstream-cef3f05a55a3a3e6d2e18aef5459dda78fc3e336.tar.gz
upstream-cef3f05a55a3a3e6d2e18aef5459dda78fc3e336.tar.bz2
upstream-cef3f05a55a3a3e6d2e18aef5459dda78fc3e336.zip
realtek: add support for Panasonic Switch-M48eG PN28480K
Panasonic Switch-M48eG PN28480K is a 48 + 4 port gigabit switch, based on RTL8393M. Specification: - SoC : Realtek RTL8393M - RAM : DDR3 128 MiB (Winbond W631GG8KB-15) - Flash : SPI-NOR 32 MiB (Macronix MX25L25635FMI-10G) - Ethernet : 10/100/1000 Mbps x48 + 2 - port 1-40 : TP, RTL8218B x5 - port 41-48 : RTL8218FB - port 41-44: TP - port 45-48: TP/SFP (Combo) - LEDs/Keys : 7x / 1x - UART : RS-232 port on the front panel (connector: RJ-45) - 3:TX, 4:GND, 5:GND, 6:RX (pin number: RJ-45) - 9600n8 - Power : 100-240 VAC, 50/60 Hz, 0.5 A - Plug : IEC 60320-C13 - Stock OS : VxWorks based Flash instruction using initramfs image: 1. Prepare the TFTP server with the IP address 192.168.1.111 2. Rename the OpenWrt initramfs image to "0101A8C0.img" and place it to the TFTP directory 3. Download the official upgrading firmware (ex: pn28480k_v30000.rom) and place it to the TFTP directory 4. Boot M48eG and interrupt the U-Boot with Ctrl + C keys 5. Execute the following commands and boot with the OpenWrt initramfs image rtk network on tftpboot 0x81000000 bootm 6. Backup mtdblock files to the computer by scp or anything and reboot 7. Interrupt the U-Boot and execute the following commands to re-create filesystem in the flash ffsmount c:/ ffsfmt c:/ this step takes a long time, about ~ 4 mins 8. Execute the following commands to put the official images to the filesystem updatert <official image> example: updatert pn28480k_v30000.rom this step takes about ~ 40 secs 9. Set the environment variables of the U-Boot by the following commands setenv loadaddr 0xb4e00000 setenv bootcmd 'sleep 10; bootm;' saveenv 'sleep 10;' is required as dummy to execute 'bootm' command correctly 10: Download the OpenWrt initramfs image and boot with it tftpboot 0x81000000 0101A8C0.img bootm 11: On the initramfs image, download the sysupgrade image and perform sysupgrade with it sysupgrade <imagename> 12: Wait ~ 120 seconds to complete flashing Known Issues: - 4x SFP ports are provided as combo ports by the RTL8218FB chip, but the phy driver has no support for it. Currently, only TP ports work by the RTL8218B support. Note: - "Switch-M48eG" is a model name, and "PN28480K" is a model number. Switch-M48eG has an another (old) model number ("PN28480"), it's not a Realtek based hardware. - Switch-M48eG has a "POWER" LED (Green), but it's not connected to any GPIO pin. - U-Boot checks the runtime images in the flash when booting and fails to execute "bootcmd" variable if the images are not existing. - A filesystem is formed in the flash (0x100000-0x1DFFFFF) on the stock firmware and it includes the stock images, configuration files and checksum files. It's unknown format, can't be managed on the OpenWrt. To get the enough space for OpenWrt, move the filesystem to the head of "fs_reserved" partition by execution of "ffsfmt" and "updatert". - A GPIO pin on PCA9539 is used for resetting external RTL8218B phys and RTL8218FB phy. This should be specified as "reset-gpios" property in MDIO node, but the current configuration of RTL8218B phy in the driver seems to be incomplete and RTL8218FB won't be configured on RTL8218D support. So, ethernet ports on these phys will be broken after hard-resetting. At the moment, configure this pin as gpio-hog to avoid breaking by resetting. - This model has 2x Microchip TCN75A thermal sensors. Linux Kernel supports TCN75 chip on lm75 driver, but no support for TCN75'A' variant. At the moment, use TCN75 support for the chips instead. Back to the stock firmware: 1. Delete "loadaddr" variable and set "bootcmd" to the original value on U-Boot: setenv loadaddr setenv bootcmd 'ffsrdm c:/runtime.had 0x81000000;alphadec c:/runtime.had 0x81000240 0x80010000;' on OpenWrt: fw_setenv loadaddr fw_setenv bootcmd 'ffsrdm c:/runtime.had 0x81000000;alphadec c:/runtime.had 0x81000240 0x80010000;' 2. Perform reset or reboot on U-Boot: reset on OpenWrt: reboot Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/realtek')
-rw-r--r--target/linux/realtek/dts-5.10/rtl8393_panasonic_m48eg-pn28480k.dts380
-rw-r--r--target/linux/realtek/image/rtl839x.mk11
2 files changed, 391 insertions, 0 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl8393_panasonic_m48eg-pn28480k.dts b/target/linux/realtek/dts-5.10/rtl8393_panasonic_m48eg-pn28480k.dts
new file mode 100644
index 0000000000..6a7eb6eb81
--- /dev/null
+++ b/target/linux/realtek/dts-5.10/rtl8393_panasonic_m48eg-pn28480k.dts
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rtl839x.dtsi"
+#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "panasonic,m48eg-pn28480k", "realtek,rtl8393-soc";
+ model = "Panasonic Switch-M48eG PN28480K";
+
+ aliases {
+ led-boot = &led_status_eco_green;
+ led-failsafe = &led_status_eco_amber;
+ led-running = &led_status_eco_green;
+ led-upgrade = &led_status_eco_green;
+ };
+
+ fan: gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ /* the actual speeds (rpm) are unknown, just use dummy values */
+ gpio-fan,speed-map = <1 0>, <2 1>;
+ #cooling-cells = <2>;
+ };
+
+ /*
+ * sfp0/1/2/3 are "combo" port with each TP port (45/46/47/48),
+ * and they are connected to the RTL8218FB. Currently, there is
+ * no support for the chip and only TP ports work by the RTL8218B
+ * support.
+ */
+ sfp0: sfp-p45 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c0>;
+ tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp1: sfp-p46 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c1>;
+ tx-fault-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ los-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp2: sfp-p47 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c2>;
+ tx-fault-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ los-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp3: sfp-p48 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c3>;
+ tx-fault-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ los-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ thermal-zones {
+ /*
+ * Zone for SoC temperature
+ *
+ * Fan speed:
+ *
+ * - 0-44 celsius: Low
+ * - 45-54 celsius: High
+ */
+ cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <2000>;
+
+ thermal-sensors = <&tsens_soc>;
+
+ trips {
+ cpu_alert: trip-point {
+ temperature = <45000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpu_crit {
+ temperature = <55000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map {
+ trip = <&cpu_alert>;
+ cooling-device = <&fan 0 1>;
+ };
+ };
+ };
+
+ /*
+ * Zone for system temperature
+ *
+ * Fan speed:
+ *
+ * - 0-39 celsius: Low
+ * - 40-49 celsius: High
+ *
+ * Note: official recommended ranges of temperature on each
+ * fan speed setting:
+ *
+ * - Low speed : 0-40 celsius
+ * - High speed: 0-50 celsius
+ *
+ * (stock firmware doesn't support auto-selection of
+ * speed and need to be selected manually by user)
+ */
+ sys-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <2000>;
+
+ thermal-sensors = <&tsens_sys>;
+
+ trips {
+ sys_alert: trip-point {
+ temperature = <40000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ sys_crit {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map {
+ trip = <&sys_alert>;
+ cooling-device = <&fan 0 1>;
+ };
+ };
+ };
+ };
+};
+
+&leds {
+ led_status_eco_amber: led-5 {
+ label = "amber:status_eco";
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <1>;
+ };
+
+ led_status_eco_green: led-6 {
+ label = "green:status_eco";
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <2>;
+ };
+};
+
+&i2c_gpio_0 {
+ scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ /* Microchip TCN75A (for SoC) */
+ tsens_soc: sensor@48 {
+ compatible = "microchip,tcn75";
+ reg = <0x48>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ /* Microchip TCN75A (for System) */
+ tsens_sys: sensor@49 {
+ compatible = "microchip,tcn75";
+ reg = <0x49>;
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&i2c_gpio_1 {
+ scl-gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&gpio2 {
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+ /*
+ * GPIO12 (IO1_4): 5x RTL8218B + RTL8218FB
+ *
+ * This GPIO pin should be specified as "reset-gpio" in mdio node,
+ * but the current configuration of RTL8218B phy in the phy driver
+ * seems to be incomplete and RTL8218FB phy won't be configured on
+ * RTL8218D support. So, ethernet ports on these phys will be broken
+ * after hard-resetting.
+ * (RTL8218FB phy will be detected as RTL8218D by the phy driver)
+ * At the moment, configure this GPIO pin as gpio-hog to avoid breaking
+ * by resetting.
+ */
+ ext_switch_reset {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "ext-switch-reset";
+ };
+};
+
+&i2c_switch {
+ i2c0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+};
+
+&ethernet0 {
+ mdio-bus {
+ compatible = "realtek,rtl838x-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ EXTERNAL_PHY(0)
+ EXTERNAL_PHY(1)
+ EXTERNAL_PHY(2)
+ EXTERNAL_PHY(3)
+ EXTERNAL_PHY(4)
+ EXTERNAL_PHY(5)
+ EXTERNAL_PHY(6)
+ EXTERNAL_PHY(7)
+
+ EXTERNAL_PHY(8)
+ EXTERNAL_PHY(9)
+ EXTERNAL_PHY(10)
+ EXTERNAL_PHY(11)
+ EXTERNAL_PHY(12)
+ EXTERNAL_PHY(13)
+ EXTERNAL_PHY(14)
+ EXTERNAL_PHY(15)
+
+ EXTERNAL_PHY(16)
+ EXTERNAL_PHY(17)
+ EXTERNAL_PHY(18)
+ EXTERNAL_PHY(19)
+ EXTERNAL_PHY(20)
+ EXTERNAL_PHY(21)
+ EXTERNAL_PHY(22)
+ EXTERNAL_PHY(23)
+
+ EXTERNAL_PHY(24)
+ EXTERNAL_PHY(25)
+ EXTERNAL_PHY(26)
+ EXTERNAL_PHY(27)
+ EXTERNAL_PHY(28)
+ EXTERNAL_PHY(29)
+ EXTERNAL_PHY(30)
+ EXTERNAL_PHY(31)
+
+ EXTERNAL_PHY(32)
+ EXTERNAL_PHY(33)
+ EXTERNAL_PHY(34)
+ EXTERNAL_PHY(35)
+ EXTERNAL_PHY(36)
+ EXTERNAL_PHY(37)
+ EXTERNAL_PHY(38)
+ EXTERNAL_PHY(39)
+
+ /* RTL8218FB */
+ EXTERNAL_PHY(40)
+ EXTERNAL_PHY(41)
+ EXTERNAL_PHY(42)
+ EXTERNAL_PHY(43)
+ EXTERNAL_PHY(44)
+ EXTERNAL_PHY(45)
+ EXTERNAL_PHY(46)
+ EXTERNAL_PHY(47)
+ };
+};
+
+&switch0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ SWITCH_PORT(0, 1, qsgmii)
+ SWITCH_PORT(1, 2, qsgmii)
+ SWITCH_PORT(2, 3, qsgmii)
+ SWITCH_PORT(3, 4, qsgmii)
+ SWITCH_PORT(4, 5, qsgmii)
+ SWITCH_PORT(5, 6, qsgmii)
+ SWITCH_PORT(6, 7, qsgmii)
+ SWITCH_PORT(7, 8, qsgmii)
+
+ SWITCH_PORT(8, 9, qsgmii)
+ SWITCH_PORT(9, 10, qsgmii)
+ SWITCH_PORT(10, 11, qsgmii)
+ SWITCH_PORT(11, 12, qsgmii)
+ SWITCH_PORT(12, 13, qsgmii)
+ SWITCH_PORT(13, 14, qsgmii)
+ SWITCH_PORT(14, 15, qsgmii)
+ SWITCH_PORT(15, 16, qsgmii)
+
+ SWITCH_PORT(16, 17, qsgmii)
+ SWITCH_PORT(17, 18, qsgmii)
+ SWITCH_PORT(18, 19, qsgmii)
+ SWITCH_PORT(19, 20, qsgmii)
+ SWITCH_PORT(20, 21, qsgmii)
+ SWITCH_PORT(21, 22, qsgmii)
+ SWITCH_PORT(22, 23, qsgmii)
+ SWITCH_PORT(23, 24, qsgmii)
+
+ SWITCH_PORT(24, 25, qsgmii)
+ SWITCH_PORT(25, 26, qsgmii)
+ SWITCH_PORT(26, 27, qsgmii)
+ SWITCH_PORT(27, 28, qsgmii)
+ SWITCH_PORT(28, 29, qsgmii)
+ SWITCH_PORT(29, 30, qsgmii)
+ SWITCH_PORT(30, 31, qsgmii)
+ SWITCH_PORT(31, 32, qsgmii)
+
+ SWITCH_PORT(32, 33, qsgmii)
+ SWITCH_PORT(33, 34, qsgmii)
+ SWITCH_PORT(34, 35, qsgmii)
+ SWITCH_PORT(35, 36, qsgmii)
+ SWITCH_PORT(36, 37, qsgmii)
+ SWITCH_PORT(37, 38, qsgmii)
+ SWITCH_PORT(38, 39, qsgmii)
+ SWITCH_PORT(39, 40, qsgmii)
+
+ SWITCH_PORT(40, 41, qsgmii)
+ SWITCH_PORT(41, 42, qsgmii)
+ SWITCH_PORT(42, 43, qsgmii)
+ SWITCH_PORT(43, 44, qsgmii)
+ SWITCH_PORT(44, 45, qsgmii)
+ SWITCH_PORT(45, 46, qsgmii)
+ SWITCH_PORT(46, 47, qsgmii)
+ SWITCH_PORT(47, 48, qsgmii)
+
+ port@52 {
+ ethernet = <&ethernet0>;
+ reg = <52>;
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/target/linux/realtek/image/rtl839x.mk b/target/linux/realtek/image/rtl839x.mk
index 2363b91849..8917e8550f 100644
--- a/target/linux/realtek/image/rtl839x.mk
+++ b/target/linux/realtek/image/rtl839x.mk
@@ -1,5 +1,16 @@
# SPDX-License-Identifier: GPL-2.0-only
+define Device/panasonic_m48eg-pn28480k
+ SOC := rtl8393
+ IMAGE_SIZE := 16384k
+ DEVICE_VENDOR := Panasonic
+ DEVICE_MODEL := Switch-M48eG
+ DEVICE_VARIANT := PN28480K
+ DEVICE_PACKAGES := kmod-hwmon-gpiofan kmod-hwmon-lm75 kmod-i2c-mux-pca954x \
+ kmod-thermal
+endef
+TARGET_DEVICES += panasonic_m48eg-pn28480k
+
define Device/zyxel_gs1900-48
SOC := rtl8393
IMAGE_SIZE := 13952k