aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/rb532/patches-2.6.24
diff options
context:
space:
mode:
authorFlorian Fainelli <florian@openwrt.org>2008-07-15 17:18:28 +0000
committerFlorian Fainelli <florian@openwrt.org>2008-07-15 17:18:28 +0000
commitb0250695a9247aac244b770a0fb0d6deaad5467c (patch)
tree2bb27977d90b0912abb949aa056003cba3a00e09 /target/linux/rb532/patches-2.6.24
parent714a721010caa3941e7e178944c9e843c2108b59 (diff)
downloadupstream-b0250695a9247aac244b770a0fb0d6deaad5467c.tar.gz
upstream-b0250695a9247aac244b770a0fb0d6deaad5467c.tar.bz2
upstream-b0250695a9247aac244b770a0fb0d6deaad5467c.zip
Add basic 2.6.24 support for rb532, korina napi code has to be adapted to work
SVN-Revision: 11844
Diffstat (limited to 'target/linux/rb532/patches-2.6.24')
-rw-r--r--target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch101
-rw-r--r--target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch31
-rw-r--r--target/linux/rb532/patches-2.6.24/120-cf.patch31
-rw-r--r--target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch15
-rw-r--r--target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch15
-rw-r--r--target/linux/rb532/patches-2.6.24/220-serial_fix.patch18
-rw-r--r--target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch100
-rw-r--r--target/linux/rb532/patches-2.6.24/510-rb500_led.patch27
-rw-r--r--target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch33
-rw-r--r--target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch12
10 files changed, 383 insertions, 0 deletions
diff --git a/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch b/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch
new file mode 100644
index 0000000000..081eced2b4
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch
@@ -0,0 +1,101 @@
+diff -urN linux-2.6.24.7/arch/mips/Kconfig linux-2.6.24.7.new/arch/mips/Kconfig
+--- linux-2.6.24.7/arch/mips/Kconfig 2008-05-07 01:22:34.000000000 +0200
++++ linux-2.6.24.7.new/arch/mips/Kconfig 2008-07-15 15:29:51.000000000 +0200
+@@ -687,6 +687,23 @@
+ This enables support for the Wind River MIPS32 4KC PPMC evaluation
+ board, which is based on GT64120 bridge chip.
+
++config MIKROTIK_RB500
++ bool "Support for RB5xx boards"
++ select HW_HAS_PCI
++ select CEVT_R4K
++ select CSRC_R4K
++ select IRQ_CPU
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_SUPPORTS_LITTLE_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SWAP_IO_SPACE
++ select DMA_NONCOHERENT
++ select GENERIC_GPIO
++ help
++ Support the Mikrotik(tm) Routerboard 500 series,
++ such as the RB532.
++
++
+ endchoice
+
+ source "arch/mips/au1000/Kconfig"
+@@ -967,6 +982,7 @@
+ default "4" if MACH_DECSTATION
+ default "7" if SGI_IP27 || SNI_RM
+ default "4" if PMC_MSP4200_EVAL
++ default "4" if MIKROTIK_RB500
+ default "5"
+
+ config HAVE_STD_PC_SERIAL_PORT
+diff -urN linux-2.6.24.7/arch/mips/Makefile linux-2.6.24.7.new/arch/mips/Makefile
+--- linux-2.6.24.7/arch/mips/Makefile 2008-07-15 15:27:55.000000000 +0200
++++ linux-2.6.24.7.new/arch/mips/Makefile 2008-07-15 15:30:21.000000000 +0200
+@@ -297,6 +297,13 @@
+ cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
+
+ #
++# Routerboard 532 board
++#
++core-$(CONFIG_MIKROTIK_RB500) += arch/mips/rb500/
++cflags-$(CONFIG_MIKROTIK_RB500) += -Iinclude/asm-mips/rc32434
++load-$(CONFIG_MIKROTIK_RB500) += 0xffffffff80101000
++
++#
+ # For all MIPS, Inc. eval boards
+ #
+ core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/
+diff -urN linux-2.6.24.7/arch/mips/pci/Makefile linux-2.6.24.7.new/arch/mips/pci/Makefile
+--- linux-2.6.24.7/arch/mips/pci/Makefile 2008-05-07 01:22:34.000000000 +0200
++++ linux-2.6.24.7.new/arch/mips/pci/Makefile 2008-07-15 15:30:46.000000000 +0200
+@@ -48,3 +48,4 @@
+ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
+ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
++obj-$(CONFIG_MIKROTIK_RB500) += pci-rc32434.o ops-rc32434.o fixup-rb500.o
+diff -urN linux-2.6.24.7/drivers/pci/Makefile linux-2.6.24.7.new/drivers/pci/Makefile
+--- linux-2.6.24.7/drivers/pci/Makefile 2008-05-07 01:22:34.000000000 +0200
++++ linux-2.6.24.7.new/drivers/pci/Makefile 2008-07-15 15:31:20.000000000 +0200
+@@ -35,6 +35,7 @@
+ obj-$(CONFIG_PPC64) += setup-bus.o
+ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
+ obj-$(CONFIG_X86_VISWS) += setup-irq.o
++obj-$(CONFIG_MIKROTIK_RB500) += setup-irq.o
+
+ #
+ # ACPI Related PCI FW Functions
+diff -urN linux-2.6.24.7/include/asm-mips/bootinfo.h linux-2.6.24.7.new/include/asm-mips/bootinfo.h
+--- linux-2.6.24.7/include/asm-mips/bootinfo.h 2008-05-07 01:22:34.000000000 +0200
++++ linux-2.6.24.7.new/include/asm-mips/bootinfo.h 2008-07-15 15:32:06.000000000 +0200
+@@ -198,6 +198,14 @@
+ #define MACH_GROUP_BRCM 23 /* Broadcom */
+ #define MACH_BCM47XX 1 /* Broadcom BCM47XX */
+
++
++/*
++ * Valid machtype for group Mikrotik
++ */
++#define MACH_GROUP_MIKROTIK 29 /* Mikrotik Boards */
++#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
++#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */
++
+ #define CL_SIZE COMMAND_LINE_SIZE
+
+ const char *get_system_type(void);
+diff -urN linux-2.6.24.7/include/asm-mips/cpu.h linux-2.6.24.7.new/include/asm-mips/cpu.h
+--- linux-2.6.24.7/include/asm-mips/cpu.h 2008-05-07 01:22:34.000000000 +0200
++++ linux-2.6.24.7.new/include/asm-mips/cpu.h 2008-07-15 15:32:22.000000000 +0200
+@@ -196,7 +196,7 @@
+ */
+ CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_74K, CPU_AU1000,
+ CPU_AU1100, CPU_AU1200, CPU_AU1500, CPU_AU1550, CPU_PR4450,
+- CPU_BCM3302, CPU_BCM4710,
++ CPU_BCM3302, CPU_BCM4710, CPU_RC32300,
+
+ /*
+ * MIPS64 class processors
diff --git a/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch b/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch
new file mode 100644
index 0000000000..acfba6c00a
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch
@@ -0,0 +1,31 @@
+Index: linux-2.6.23.17/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/net/Kconfig
++++ linux-2.6.23.17/drivers/net/Kconfig
+@@ -348,6 +348,13 @@ config AX88796
+ AX88796 driver, using platform bus to provide
+ chip detection and resources
+
++config KORINA
++ tristate "Korina Local Ethernet support"
++ depends on NET_ETHERNET && ( IDT_EB434 || MIKROTIK_RB500)
++ help
++ IDT RC32434 has one local ethernet port. Say Y here to enable it.
++ To compile this driver as a module, choose M here.
++
+ config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on PPC_PMAC && PPC32
+Index: linux-2.6.23.17/drivers/net/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/net/Makefile
++++ linux-2.6.23.17/drivers/net/Makefile
+@@ -25,6 +25,8 @@ ucc_geth_driver-objs := ucc_geth.o ucc_g
+ #
+ obj-$(CONFIG_PLIP) += plip.o
+
++obj-$(CONFIG_KORINA) += korina.o
++
+ obj-$(CONFIG_ROADRUNNER) += rrunner.o
+
+ obj-$(CONFIG_HAPPYMEAL) += sunhme.o
diff --git a/target/linux/rb532/patches-2.6.24/120-cf.patch b/target/linux/rb532/patches-2.6.24/120-cf.patch
new file mode 100644
index 0000000000..522195e451
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.24/120-cf.patch
@@ -0,0 +1,31 @@
+Index: linux-2.6.23.17/drivers/block/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/block/Kconfig
++++ linux-2.6.23.17/drivers/block/Kconfig
+@@ -426,6 +426,14 @@ config SUNVDC
+ Support for virtual disk devices as a client under Sun
+ Logical Domains.
+
++config BLK_DEV_CF_MIPS
++ bool "CF slot of RB532 board"
++ depends on MIKROTIK_RB500
++ default y
++ help
++ The Routerboard 532 has a CF slot on it. Enable the special block
++ device driver for it.
++
+ source "drivers/s390/block/Kconfig"
+
+ config XILINX_SYSACE
+Index: linux-2.6.23.17/drivers/block/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/block/Makefile
++++ linux-2.6.23.17/drivers/block/Makefile
+@@ -21,6 +21,7 @@ obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o
+ obj-$(CONFIG_XILINX_SYSACE) += xsysace.o
+ obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
+ obj-$(CONFIG_SUNVDC) += sunvdc.o
++obj-$(CONFIG_BLK_DEV_CF_MIPS) += rb500/
+
+ obj-$(CONFIG_BLK_DEV_UMEM) += umem.o
+ obj-$(CONFIG_BLK_DEV_NBD) += nbd.o
diff --git a/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch b/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch
new file mode 100644
index 0000000000..1e01e953e5
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch
@@ -0,0 +1,15 @@
+Index: linux-2.6.23.17/arch/mips/kernel/head.S
+===================================================================
+--- linux-2.6.23.17.orig/arch/mips/kernel/head.S
++++ linux-2.6.23.17/arch/mips/kernel/head.S
+@@ -132,6 +132,10 @@
+
+ j kernel_entry
+ nop
++
++EXPORT(_image_cmdline)
++ .ascii "CMDLINE:"
++
+ #ifndef CONFIG_NO_EXCEPT_FILL
+ /*
+ * Reserved space for exception handlers.
diff --git a/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch b/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch
new file mode 100644
index 0000000000..707935539b
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch
@@ -0,0 +1,15 @@
+Index: linux-2.6.23.17/arch/mips/pci/pci.c
+===================================================================
+--- linux-2.6.23.17.orig/arch/mips/pci/pci.c
++++ linux-2.6.23.17/arch/mips/pci/pci.c
+@@ -64,8 +64,10 @@ pcibios_align_resource(void *data, struc
+ /*
+ * Put everything into 0x00-0xff region modulo 0x400
+ */
++#ifndef CONFIG_MIKROTIK_RB500
+ if (start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
++#endif
+ } else if (res->flags & IORESOURCE_MEM) {
+ /* Make sure we start at our min on all hoses */
+ if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
diff --git a/target/linux/rb532/patches-2.6.24/220-serial_fix.patch b/target/linux/rb532/patches-2.6.24/220-serial_fix.patch
new file mode 100644
index 0000000000..4af6620fb5
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.24/220-serial_fix.patch
@@ -0,0 +1,18 @@
+Index: linux-2.6.23.17/drivers/serial/8250.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/serial/8250.c
++++ linux-2.6.23.17/drivers/serial/8250.c
+@@ -433,6 +433,13 @@ serial_out(struct uart_8250_port *up, in
+ default:
+ outb(value, up->port.iobase + offset);
+ }
++
++#if defined(CONFIG_IDT_EB434) || defined(CONFIG_MIKROTIK_RB500)
++ __SLOW_DOWN_IO;
++ __SLOW_DOWN_IO;
++ __SLOW_DOWN_IO;
++ __SLOW_DOWN_IO;
++#endif
+ }
+
+ static void
diff --git a/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch b/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch
new file mode 100644
index 0000000000..d82b6f7055
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch
@@ -0,0 +1,100 @@
+Index: linux-2.6.23.17/drivers/net/via-rhine.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/net/via-rhine.c
++++ linux-2.6.23.17/drivers/net/via-rhine.c
+@@ -33,6 +33,8 @@
+ #define DRV_VERSION "1.4.3"
+ #define DRV_RELDATE "2007-03-06"
+
++#define PKT_ALIGN 1
++
+
+ /* A few user-configurable values.
+ These may be modified when a driver module is loaded. */
+@@ -40,6 +42,7 @@
+ static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
+ static int max_interrupt_work = 20;
+
++#ifndef PKT_ALIGN
+ /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+ Setting to > 1518 effectively disables this feature. */
+ #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
+@@ -49,6 +52,7 @@ static int rx_copybreak = 1518;
+ #else
+ static int rx_copybreak;
+ #endif
++#endif /* PKT_ALIGN */
+
+ /* Work-around for broken BIOSes: they are unable to get the chip back out of
+ power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
+@@ -111,6 +115,7 @@ static const int multicast_filter_limit
+ #include <asm/io.h>
+ #include <asm/irq.h>
+ #include <asm/uaccess.h>
++#include <asm/unaligned.h>
+ #include <linux/dmi.h>
+
+ /* These identify the driver base version and may not be removed. */
+@@ -130,12 +135,14 @@ MODULE_LICENSE("GPL");
+
+ module_param(max_interrupt_work, int, 0);
+ module_param(debug, int, 0);
+-module_param(rx_copybreak, int, 0);
+ module_param(avoid_D3, bool, 0);
+ MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
+ MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
+-MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
+ MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
++#ifndef PKT_ALIGN
++module_param(rx_copybreak, int, 0);
++MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
++#endif
+
+ /*
+ Theory of Operation
+@@ -927,7 +934,7 @@ static void alloc_rbufs(struct net_devic
+
+ /* Fill in the Rx buffers. Handle allocation failure gracefully. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+- struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz);
++ struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz + 4);
+ rp->rx_skbuff[i] = skb;
+ if (skb == NULL)
+ break;
+@@ -1484,7 +1491,9 @@ static int rhine_rx(struct net_device *d
+ struct sk_buff *skb;
+ /* Length should omit the CRC */
+ int pkt_len = data_size - 4;
+-
++#ifdef PKT_ALIGN
++ int i;
++#else
+ /* Check if the packet is long enough to accept without
+ copying to a minimally-sized skbuff. */
+ if (pkt_len < rx_copybreak &&
+@@ -1503,7 +1512,9 @@ static int rhine_rx(struct net_device *d
+ rp->rx_skbuff_dma[entry],
+ rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+- } else {
++ } else
++#endif
++ {
+ skb = rp->rx_skbuff[entry];
+ if (skb == NULL) {
+ printk(KERN_ERR "%s: Inconsistent Rx "
+@@ -1517,6 +1528,14 @@ static int rhine_rx(struct net_device *d
+ rp->rx_skbuff_dma[entry],
+ rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
++#ifdef PKT_ALIGN
++ /* align the data to the ip header - should be faster than copying the entire packet */
++ for (i = pkt_len - (pkt_len % 4); i >= 0; i -= 4) {
++ put_unaligned(*((u32 *) (skb->data + i)), (u32 *) (skb->data + i + 2));
++ }
++ skb->data += 2;
++ skb->tail += 2;
++#endif
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ #ifdef CONFIG_VIA_RHINE_NAPI
diff --git a/target/linux/rb532/patches-2.6.24/510-rb500_led.patch b/target/linux/rb532/patches-2.6.24/510-rb500_led.patch
new file mode 100644
index 0000000000..6cd7b1a1c5
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.24/510-rb500_led.patch
@@ -0,0 +1,27 @@
+diff -urN linux-2.6.24.7/drivers/leds/Kconfig linux-2.6.24.7.new/drivers/leds/Kconfig
+--- linux-2.6.24.7/drivers/leds/Kconfig 2008-07-15 15:27:55.000000000 +0200
++++ linux-2.6.24.7.new/drivers/leds/Kconfig 2008-07-15 15:35:24.000000000 +0200
+@@ -120,6 +120,12 @@
+ help
+ This option enables support for the CM-X270 LEDs.
+
++config LEDS_RB500
++ tristate "LED Support for RB5xx boards"
++ depends on LEDS_CLASS && MIKROTIK_RB500
++ help
++ This option enables support for the yellow user LED on RB5xx boards.
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGERS
+diff -urN linux-2.6.24.7/drivers/leds/Makefile linux-2.6.24.7.new/drivers/leds/Makefile
+--- linux-2.6.24.7/drivers/leds/Makefile 2008-07-15 15:27:55.000000000 +0200
++++ linux-2.6.24.7.new/drivers/leds/Makefile 2008-07-15 15:35:38.000000000 +0200
+@@ -20,6 +20,7 @@
+ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
+ obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+ obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
++obj-$(CONFIG_LEDS_RB500) += leds-rb500.o
+
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
diff --git a/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch b/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch
new file mode 100644
index 0000000000..6e26237042
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch
@@ -0,0 +1,33 @@
+diff -urN linux-2.6.24.7/arch/mips/kernel/time.c linux-2.6.24.7.new/arch/mips/kernel/time.c
+--- linux-2.6.24.7/arch/mips/kernel/time.c 2008-05-07 01:22:34.000000000 +0200
++++ linux-2.6.24.7.new/arch/mips/kernel/time.c 2008-07-15 15:38:33.000000000 +0200
+@@ -75,6 +75,7 @@
+ */
+
+ unsigned int mips_hpt_frequency;
++EXPORT_SYMBOL(mips_hpt_frequency);
+
+ void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
+ {
+diff -urN linux-2.6.24.7/drivers/watchdog/Kconfig linux-2.6.24.7.new/drivers/watchdog/Kconfig
+--- linux-2.6.24.7/drivers/watchdog/Kconfig 2008-05-07 01:22:34.000000000 +0200
++++ linux-2.6.24.7.new/drivers/watchdog/Kconfig 2008-07-15 15:39:24.000000000 +0200
+@@ -639,6 +639,18 @@
+ help
+ Hardware driver for the TI AR7 Watchdog Timer.
+
++config RC32434_WDT
++ tristate "IDT Interprise 79RC32434 SoC hardware watchdog"
++ depends on WATCHDOG && MIKROTIK_RB500
++ help
++ This is a driver for hardware watchdog integrated in IDT Interprise
++ 79RC32434 SoC. This watchdog simply watches your kernel to make sure
++ it doesn't freeze, and if it does, it reboots your computer after a
++ certain amount of time.
++
++ To compile this driver as a module, choose M here: the module will be
++ called rc32434_wdt.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
diff --git a/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch b/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch
new file mode 100644
index 0000000000..a37b190dfe
--- /dev/null
+++ b/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch
@@ -0,0 +1,12 @@
+diff -urN linux-2.6.24.7/arch/mips/lib/iomap-pci.c linux-2.6.24.7.new/arch/mips/lib/iomap-pci.c
+--- linux-2.6.24.7/arch/mips/lib/iomap-pci.c 2008-05-07 01:22:34.000000000 +0200
++++ linux-2.6.24.7.new/arch/mips/lib/iomap-pci.c 2008-07-15 16:24:22.000000000 +0200
+@@ -32,7 +32,7 @@
+ "report it to linux-mips@linux-mips.org or your "
+ "vendor.\n", name);
+ #ifdef CONFIG_PCI_DOMAINS
+- panic("To avoid data corruption io_map_base MUST be set with "
++ printk(KERN_WARNING "To avoid data corruption io_map_base MUST be set with "
+ "multiple PCI domains.");
+ #endif
+ }