strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

SVN-Revision: 8653

9 files changed, 0 insertions, 347 deletions

diff --git a/target/linux/rb532-2.6/patches/100-rb5xx_support.patch b/target/linux/rb532-2.6/patches/100-rb5xx_support.patch
deleted file mode 100644
index fcb6d7c5d5..0000000000
--- a/target/linux/rb532-2.6/patches/100-rb5xx_support.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
---- linux.old/arch/mips/Kconfig	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/arch/mips/Kconfig	2006-12-14 04:09:50.000000000 +0100
-@@ -780,6 +780,19 @@
- 	select SYS_SUPPORTS_BIG_ENDIAN
- 	select TOSHIBA_BOARDS
- 
-+config MIKROTIK_RB500
-+	bool "Support for RB5xx boards"
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_SUPPORTS_LITTLE_ENDIAN
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SWAP_IO_SPACE
-+	select DMA_NONCOHERENT
-+	help
-+	  Support the Mikrotik(tm) Routerboard 500 series,
-+	  such as the RB532.
-+
- config TOSHIBA_RBTX4927
- 	bool "Toshiba TBTX49[23]7 board"
- 	select DMA_NONCOHERENT
-@@ -1106,7 +1119,7 @@
- 
- config MIPS_L1_CACHE_SHIFT
- 	int
--	default "4" if MACH_DECSTATION || SNI_RM
-+	default "4" if MACH_DECSTATION || SNI_RM || MIKROTIK_RB500
- 	default "7" if SGI_IP27
- 	default "5"
- 
-diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
---- linux.old/arch/mips/Makefile	2006-12-14 03:13:55.000000000 +0100
-+++ linux.dev/arch/mips/Makefile	2006-12-14 04:09:50.000000000 +0100
-@@ -586,6 +586,13 @@
- load-$(CONFIG_TOSHIBA_JMR3927)	+= 0xffffffff80050000
- 
- #
-+# Routerboard 532 board
-+#
-+core-$(CONFIG_MIKROTIK_RB500)	+= arch/mips/rb500/
-+cflags-$(CONFIG_MIKROTIK_RB500) += -Iinclude/asm-mips/rc32434
-+load-$(CONFIG_MIKROTIK_RB500)	+= 0xffffffff80101000
-+
-+#
- # Toshiba RBTX4927 board or
- # Toshiba RBTX4937 board
- #
-diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile
---- linux.old/arch/mips/pci/Makefile	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/arch/mips/pci/Makefile	2006-12-14 04:09:50.000000000 +0100
-@@ -53,3 +53,4 @@
- obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
-+obj-$(CONFIG_MIKROTIK_RB500)	+= pci-rc32434.o ops-rc32434.o fixup-rb500.o
-diff -urN linux.old/drivers/pci/Makefile linux.dev/drivers/pci/Makefile
---- linux.old/drivers/pci/Makefile	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/drivers/pci/Makefile	2006-12-14 04:09:50.000000000 +0100
-@@ -16,6 +16,7 @@
- 
- # Build the PCI MSI interrupt support
- obj-$(CONFIG_PCI_MSI) += msi.o
-+obj-$(CONFIG_MIKROTIK_RB500) += setup-irq.o
- 
- # Build the Hypertransport interrupt support
- obj-$(CONFIG_HT_IRQ) += htirq.o
-diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
---- linux.old/include/asm-mips/bootinfo.h	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/include/asm-mips/bootinfo.h	2006-12-14 04:09:50.000000000 +0100
-@@ -212,6 +212,8 @@
- #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
- #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
- 
-+#define MACH_GROUP_MIKROTIK    24 /* Mikrotik Boards			    */
-+
- #define CL_SIZE			COMMAND_LINE_SIZE
- 
- const char *get_system_type(void);
-diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
---- linux.old/include/asm-mips/cpu.h	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/include/asm-mips/cpu.h	2006-12-14 04:09:50.000000000 +0100
-@@ -200,7 +200,8 @@
- #define CPU_SB1A		62
- #define CPU_74K			63
- #define CPU_R14000		64
--#define CPU_LAST		64
-+#define CPU_RC32300		65
-+#define CPU_LAST		65
- 
- /*
-  * ISA Level encodings
-
diff --git a/target/linux/rb532-2.6/patches/110-korina_ethernet.patch b/target/linux/rb532-2.6/patches/110-korina_ethernet.patch
deleted file mode 100644
index 55b9779a87..0000000000
--- a/target/linux/rb532-2.6/patches/110-korina_ethernet.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-diff -urN linux.old/drivers/net/Kconfig linux.dev/drivers/net/Kconfig
---- linux.old/drivers/net/Kconfig	2006-12-14 03:13:47.000000000 +0100
-+++ linux.dev/drivers/net/Kconfig	2006-12-14 03:18:45.000000000 +0100
-@@ -313,6 +313,13 @@
- 
- source "drivers/net/arm/Kconfig"
- 
-+config KORINA
-+	tristate "Korina Local Ethernet support"
-+	depends on NET_ETHERNET && ( IDT_EB434 || MIKROTIK_RB500)
-+	help
-+	IDT RC32434 has one local ethernet port. Say Y here to enable it.
-+	To compile this driver as a module, choose M here.
-+
- config MACE
- 	tristate "MACE (Power Mac ethernet) support"
- 	depends on NET_ETHERNET && PPC_PMAC && PPC32
-diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile
---- linux.old/drivers/net/Makefile	2006-12-14 03:13:47.000000000 +0100
-+++ linux.dev/drivers/net/Makefile	2006-12-14 03:18:45.000000000 +0100
-@@ -23,6 +23,8 @@
- #
- obj-$(CONFIG_PLIP) += plip.o
- 
-+obj-$(CONFIG_KORINA) += korina.o
-+
- obj-$(CONFIG_ROADRUNNER) += rrunner.o
- 
- obj-$(CONFIG_HAPPYMEAL) += sunhme.o
-
diff --git a/target/linux/rb532-2.6/patches/120-cf.patch b/target/linux/rb532-2.6/patches/120-cf.patch
deleted file mode 100644
index 19395ef664..0000000000
--- a/target/linux/rb532-2.6/patches/120-cf.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-diff -urN linux.old/drivers/block/Kconfig linux.dev/drivers/block/Kconfig
---- linux.old/drivers/block/Kconfig	2006-10-26 02:43:39.000000000 +0200
-+++ linux.dev/drivers/block/Kconfig	2006-10-26 00:11:14.000000000 +0200
-@@ -456,4 +456,12 @@
- 	This driver provides Support for ATA over Ethernet block
- 	devices like the Coraid EtherDrive (R) Storage Blade.
- 
-+config BLK_DEV_CF_MIPS
-+	bool "CF slot of RB532 board"
-+	depends on MIKROTIK_RB500
-+	default y
-+	help
-+	  The Routerboard 532 has a CF slot on it. Enable the special block
-+	  device driver for it.
-+
- endmenu
-diff -urN linux.old/drivers/block/Makefile linux.dev/drivers/block/Makefile
---- linux.old/drivers/block/Makefile	2006-06-18 03:49:35.000000000 +0200
-+++ linux.dev/drivers/block/Makefile	2006-10-26 02:44:10.000000000 +0200
-@@ -29,4 +29,5 @@
- obj-$(CONFIG_VIODASD)		+= viodasd.o
- obj-$(CONFIG_BLK_DEV_SX8)	+= sx8.o
- obj-$(CONFIG_BLK_DEV_UB)	+= ub.o
-+obj-$(CONFIG_BLK_DEV_CF_MIPS)	+= rb500/
- 
-
diff --git a/target/linux/rb532-2.6/patches/140-cmdline_hack.patch b/target/linux/rb532-2.6/patches/140-cmdline_hack.patch
deleted file mode 100644
index 4425af7de4..0000000000
--- a/target/linux/rb532-2.6/patches/140-cmdline_hack.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-Index: linux-2.6.21.1/arch/mips/kernel/head.S
-===================================================================
---- linux-2.6.21.1.orig/arch/mips/kernel/head.S	2007-06-07 01:26:11.862575128 +0200
-+++ linux-2.6.21.1/arch/mips/kernel/head.S	2007-06-07 01:31:06.499783464 +0200
-@@ -133,6 +133,9 @@
- 	j kernel_entry
- 	nop
- 
-+EXPORT(_image_cmdline)
-+ 	.ascii "CMDLINE:"
-+
- 	/*
- 	 * Reserved space for exception handlers.
- 	 * Necessary for machines which link their kernels at KSEG0.
diff --git a/target/linux/rb532-2.6/patches/200-bridge_resource_hack.patch b/target/linux/rb532-2.6/patches/200-bridge_resource_hack.patch
deleted file mode 100644
index 3017f5dfcd..0000000000
--- a/target/linux/rb532-2.6/patches/200-bridge_resource_hack.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- linux.old/arch/mips/pci/pci.c	2006-04-19 08:10:14.000000000 +0200
-+++ linux.dev/arch/mips/pci/pci.c	2006-06-14 20:23:18.000000000 +0200
-@@ -65,8 +65,10 @@
- 		/*
- 		 * Put everything into 0x00-0xff region modulo 0x400
- 		 */
-+#ifndef CONFIG_MIKROTIK_RB500
- 		if (start & 0x300)
- 			start = (start + 0x3ff) & ~0x3ff;
-+#endif
- 	} else if (res->flags & IORESOURCE_MEM) {
- 		/* Make sure we start at our min on all hoses */
- 		if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
diff --git a/target/linux/rb532-2.6/patches/220-serial_fix.patch b/target/linux/rb532-2.6/patches/220-serial_fix.patch
deleted file mode 100644
index d36f263a33..0000000000
--- a/target/linux/rb532-2.6/patches/220-serial_fix.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-diff -urN linux.old/drivers/serial/8250.c linux.dev/drivers/serial/8250.c
---- linux.old/drivers/serial/8250.c	2006-06-08 20:21:20.000000000 +0200
-+++ linux.dev/drivers/serial/8250.c	2006-06-08 20:19:40.000000000 +0200
-@@ -351,6 +351,13 @@
- 	default:
- 		outb(value, up->port.iobase + offset);
- 	}
-+
-+#if defined(CONFIG_IDT_EB434) || defined(CONFIG_MIKROTIK_RB500)
-+	__SLOW_DOWN_IO;
-+	__SLOW_DOWN_IO;
-+	__SLOW_DOWN_IO;
-+	__SLOW_DOWN_IO;
-+#endif
- }
- 
- /*
-
diff --git a/target/linux/rb532-2.6/patches/240-via_rhine_performance.patch b/target/linux/rb532-2.6/patches/240-via_rhine_performance.patch
deleted file mode 100644
index e7cdf8ae24..0000000000
--- a/target/linux/rb532-2.6/patches/240-via_rhine_performance.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-diff -ur linux.old/drivers/net/via-rhine.c linux.dev/drivers/net/via-rhine.c
---- linux.old/drivers/net/via-rhine.c	2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/drivers/net/via-rhine.c	2006-12-14 03:39:01.000000000 +0100
-@@ -33,6 +33,7 @@
- #define DRV_VERSION	"1.4.3"
- #define DRV_RELDATE	"2007-03-06"
- 
-+#define PKT_ALIGN 1
- 
- /* A few user-configurable values.
-    These may be modified when a driver module is loaded. */
-@@ -40,9 +41,11 @@
- static int debug = 1;	/* 1 normal messages, 0 quiet .. 7 verbose. */
- static int max_interrupt_work = 20;
- 
-+#ifndef PKT_ALIGN
- /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
-    Setting to > 1518 effectively disables this feature. */
- static int rx_copybreak;
-+#endif
- 
- /* Work-around for broken BIOSes: they are unable to get the chip back out of
-    power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
-@@ -105,6 +108,7 @@
- #include <asm/io.h>
- #include <asm/irq.h>
- #include <asm/uaccess.h>
-+#include <asm/unaligned.h>
- #include <linux/dmi.h>
- 
- /* These identify the driver base version and may not be removed. */
-@@ -124,12 +128,14 @@
- 
- module_param(max_interrupt_work, int, 0);
- module_param(debug, int, 0);
--module_param(rx_copybreak, int, 0);
- module_param(avoid_D3, bool, 0);
- MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
- MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
--MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
- MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
-+#ifndef PKT_ALIGN
-+module_param(rx_copybreak, int, 0);
-+MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
-+#endif
- 
- /*
- 		Theory of Operation
-@@ -924,7 +930,7 @@
- 
- 	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
- 	for (i = 0; i < RX_RING_SIZE; i++) {
--		struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz);
-+		struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz + 4);
- 		rp->rx_skbuff[i] = skb;
- 		if (skb == NULL)
- 			break;
-@@ -1482,6 +1488,9 @@
- 			/* Length should omit the CRC */
- 			int pkt_len = data_size - 4;
- 
-+#ifdef PKT_ALIGN
-+			int i;
-+#else
- 			/* Check if the packet is long enough to accept without
- 			   copying to a minimally-sized skbuff. */
- 			if (pkt_len < rx_copybreak &&
-@@ -1501,7 +1510,9 @@
- 							       rp->rx_skbuff_dma[entry],
- 							       rp->rx_buf_sz,
- 							       PCI_DMA_FROMDEVICE);
--			} else {
-+			} else
-+#endif
-+			{
- 				skb = rp->rx_skbuff[entry];
- 				if (skb == NULL) {
- 					printk(KERN_ERR "%s: Inconsistent Rx "
-@@ -1515,6 +1526,14 @@
- 						 rp->rx_skbuff_dma[entry],
- 						 rp->rx_buf_sz,
- 						 PCI_DMA_FROMDEVICE);
-+#ifdef PKT_ALIGN		
-+				/* align the data to the ip header - should be faster than copying the entire packet */
-+				for (i = pkt_len - (pkt_len % 4); i >= 0; i -= 4) {
-+					put_unaligned(*((u32 *) (skb->data + i)), (u32 *) (skb->data + i + 2));
-+				}
-+				skb->data += 2;
-+				skb->tail += 2;
-+#endif	
- 			}
- 			skb->protocol = eth_type_trans(skb, dev);
- #ifdef CONFIG_VIA_RHINE_NAPI
-
diff --git a/target/linux/rb532-2.6/patches/500-Nand.patch b/target/linux/rb532-2.6/patches/500-Nand.patch
deleted file mode 100644
index 7e4cb65c77..0000000000
--- a/target/linux/rb532-2.6/patches/500-Nand.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/nand/Kconfig	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1/drivers/mtd/nand/Kconfig	2007-06-07 01:31:30.927069952 +0200
-@@ -75,6 +75,12 @@
- 	help
- 	  Support for NAND flash on Technologic Systems TS-7250 platform.
- 
-+config MTD_NAND_RB500
-+	tristate "NAND Flash device on RB500 board"
-+	depends on MTD_NAND
-+	help
-+	  Support for NAND flash on RB500 platform.
-+
- config MTD_NAND_IDS
- 	tristate
- 
-Index: linux-2.6.21.1/drivers/mtd/nand/Makefile
-===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/nand/Makefile	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1/drivers/mtd/nand/Makefile	2007-06-07 01:31:30.927069952 +0200
-@@ -10,6 +10,7 @@
- obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
- obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
- obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
-+obj-$(CONFIG_MTD_NAND_RB500)		+= rbmipsnand.o
- obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
- obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
- obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
diff --git a/target/linux/rb532-2.6/patches/510-rb500_led.patch b/target/linux/rb532-2.6/patches/510-rb500_led.patch
deleted file mode 100644
index 172682d49c..0000000000
--- a/target/linux/rb532-2.6/patches/510-rb500_led.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-Index: linux-2.6.21.1/drivers/leds/Makefile
-===================================================================
---- linux-2.6.21.1.orig/drivers/leds/Makefile    2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.21.1/drivers/leds/Makefile       2007-07-19 16:43:07.000000000 +0200
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
-+obj-$(CONFIG_LEDS_RB500)                += leds-rb500.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
-Index: linux-2.6.21.1/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/drivers/leds/Kconfig     2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.21.1/drivers/leds/Kconfig 2007-07-19 16:42:55.000000000 +0200
-@@ -95,6 +95,12 @@
- 	help
- 	  This option enables support for the front LED on Cobalt Server
- 
-+config LEDS_RB500
-+	tristate "LED Support for RB5xx boards"
-+	depends LEDS_CLASS && MIKROTIK_RB500
-+	help
-+	  This option enables support for the yellow user LED on RB5xx boards.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS