Upgrade to Linux 2.6.19

- Includes large parts of the patch from #1021 by dpalffy
- Includes RB532 NAND driver changes by n0-1

SVN-Revision: 5789

1 files changed, 79 insertions, 159 deletions

diff --git a/target/linux/rb532-2.6/patches/500-Nand.patch b/target/linux/rb532-2.6/patches/500-Nand.patch
index dc310e9cea..cb2346544c 100644
--- a/target/linux/rb532-2.6/patches/500-Nand.patch
+++ b/target/linux/rb532-2.6/patches/500-Nand.patch
@@ -1,10 +1,9 @@
-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index cfe288a..c528024 100644
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -55,6 +55,12 @@ config MTD_NAND_TOTO
+diff -urN linux.old/drivers/mtd/nand/Kconfig linux.dev/drivers/mtd/nand/Kconfig
+--- linux.old/drivers/mtd/nand/Kconfig	2006-11-29 22:57:37.000000000 +0100
++++ linux.dev/drivers/mtd/nand/Kconfig	2006-12-14 04:38:51.000000000 +0100
+@@ -75,6 +75,12 @@
  	help
- 	  Support for NAND flash on Texas Instruments Toto platform.
+ 	  Support for NAND flash on Technologic Systems TS-7250 platform.
  
 +config MTD_NAND_RB500
 +	tristate "NAND Flash device on RB500 board"
@@ -15,24 +14,21 @@ index cfe288a..c528024 100644
  config MTD_NAND_IDS
  	tristate
  
-diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
-index 4174202..2be57c1 100644
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.
- 
+diff -urN linux.old/drivers/mtd/nand/Makefile linux.dev/drivers/mtd/nand/Makefile
+--- linux.old/drivers/mtd/nand/Makefile	2006-11-29 22:57:37.000000000 +0100
++++ linux.dev/drivers/mtd/nand/Makefile	2006-12-14 04:38:51.000000000 +0100
+@@ -9,6 +9,7 @@
  obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
+ obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
  obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
 +obj-$(CONFIG_MTD_NAND_RB500)		+= rbmipsnand.o
  obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
  obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
  obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
-diff --git a/drivers/mtd/nand/rbmipsnand.c b/drivers/mtd/nand/rbmipsnand.c
-new file mode 100644
-index 0000000..6f7452a
---- /dev/null
-+++ b/drivers/mtd/nand/rbmipsnand.c
-@@ -0,0 +1,211 @@
+diff -urN linux.old/drivers/mtd/nand/rbmipsnand.c linux.dev/drivers/mtd/nand/rbmipsnand.c
+--- linux.old/drivers/mtd/nand/rbmipsnand.c	1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/mtd/nand/rbmipsnand.c	2006-12-14 04:39:52.000000000 +0100
+@@ -0,0 +1,137 @@
 +#include <linux/init.h>
 +#include <linux/mtd/nand.h>
 +#include <linux/mtd/mtd.h>
@@ -41,12 +37,9 @@ index 0000000..6f7452a
 +#include <asm/io.h>
 +#include <asm/irq.h>
 +#include <asm/bootinfo.h>
-+//#include <asm/rb/rb100.h>
 +
 +#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
 +
-+#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(SMEM1_BASE) + x)))
-+
 +#define GPIOF 0x050000
 +#define GPIOC 0x050004
 +#define GPIOD 0x050008
@@ -56,19 +49,6 @@ index 0000000..6f7452a
 +#define GPIO_ALE (1 << 0x0a)
 +#define GPIO_CLE (1 << 0x0b)
 +
-+#define NAND_RW_REG	0x0	//data register
-+#define NAND_SET_CEn	0x1	//CE# low
-+#define NAND_CLR_CEn	0x2	//CE# high
-+#define NAND_CLR_CLE	0x3	//CLE low
-+#define NAND_SET_CLE	0x4	//CLE high
-+#define NAND_CLR_ALE	0x5	//ALE low
-+#define NAND_SET_ALE	0x6	//ALE high
-+#define NAND_SET_SPn	0x7	//SP# low (use spare area)
-+#define NAND_CLR_SPn	0x8	//SP# high (do not use spare area)
-+#define NAND_SET_WPn	0x9	//WP# low
-+#define NAND_CLR_WPn	0xA	//WP# high
-+#define NAND_STS_REG	0xB	//Status register
-+
 +#define DEV2BASE 0x010020
 +
 +#define LO_WPX   (1 << 0)
@@ -84,89 +64,48 @@ index 0000000..6f7452a
 +
 +extern void changeLatchU5(unsigned char orMask, unsigned char nandMask);
 +
-+static int rb500_dev_ready(struct mtd_info *mtd) {
-+    return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
-+}
-+/*
-+static int rb100_dev_ready(struct mtd_info *mtd) {
-+    return SMEM1(NAND_STS_REG) & 0x80;
-+}
-+*/
-+static unsigned long iflags = 0;
-+static int ioff = 0;
-+/*
-+static void rbmips_hwcontrol400(struct mtd_info *mtd, int cmd) {
-+    switch (cmd) {
-+    case NAND_CTL_SETCLE:
-+	MEM32(IDT434_REG_BASE + GPIOD) |= GPIO_CLE;
-+        break;
-+    case NAND_CTL_CLRCLE:
-+	MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_CLE;
-+        break;
-+    case NAND_CTL_SETALE:
-+	MEM32(IDT434_REG_BASE + GPIOD) |= GPIO_ALE;
-+        break;
-+    case NAND_CTL_CLRALE:
-+	MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_ALE;
-+        break;
-+    default:
-+	break;
-+    }
-+}
-+*/
-+static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd) {
-+    switch (cmd) {
-+    case NAND_CTL_SETCLE:
-+	changeLatchU5(LO_CLE, 0);
-+        break;
-+    case NAND_CTL_CLRCLE:
-+	changeLatchU5(0, LO_CLE);
-+        break;
-+    case NAND_CTL_SETALE:
-+	changeLatchU5(LO_ALE, 0);
-+        break;
-+    case NAND_CTL_CLRALE:
-+	changeLatchU5(0, LO_ALE);
-+        break;
-+    default:
-+        break;
-+    }
++static int rb500_dev_ready(struct mtd_info *mtd)
++{
++	return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
 +}
++
 +/*
-+static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd){
-+    switch(cmd){
-+    case NAND_CTL_SETCLE: 
-+	SMEM1(NAND_SET_CLE) = 0x01; 
-+	break;
-+    case NAND_CTL_CLRCLE: 
-+	SMEM1(NAND_CLR_CLE) = 0x01; 
-+	break;
-+    case NAND_CTL_SETALE: 
-+	SMEM1(NAND_SET_ALE) = 0x01; 
-+	break;
-+    case NAND_CTL_CLRALE: 
-+	SMEM1(NAND_CLR_ALE) = 0x01; 
-+	break;
-+    case NAND_CTL_SETNCE: 
-+	SMEM1(NAND_SET_CEn) = 0x01; 
-+	break;
-+    case NAND_CTL_CLRNCE: 
-+	SMEM1(NAND_CLR_CEn) = 0x01; 
-+	break;
-+    }
++ * hardware specific access to control-lines
++ *
++ * ctrl:
++ *     NAND_CLE: bit 2 -> bit 3 
++ *     NAND_ALE: bit 3 -> bit 2
++ */
++static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd,
++				unsigned int ctrl)
++{
++	struct nand_chip *chip = mtd->priv;
++	unsigned char orbits, nandbits;
++
++	if (ctrl & NAND_CTRL_CHANGE) {
++
++		orbits = (ctrl & NAND_CLE) << 1;
++		orbits |= (ctrl & NAND_ALE) >> 1;
++
++		nandbits = (~ctrl & NAND_CLE) << 1;
++		nandbits |= (~ctrl & NAND_ALE) >> 1;
++
++		changeLatchU5(orbits, nandbits);
++	}
++	if (cmd != NAND_CMD_NONE)
++		writeb(cmd, chip->IO_ADDR_W);
++
 +}
-+*/
++
 +static struct mtd_partition partition_info[] = {
-+    {
-+        name: "RouterBoard NAND Boot",
-+        offset: 0,
-+	size: 4 * 1024 * 1024
-+    },
-+    {
-+        name: "RouterBoard NAND Main",
-+	offset: MTDPART_OFS_NXTBLK,
-+	size: MTDPART_SIZ_FULL
-+    }
++	{
++	      name:"RouterBoard NAND Boot",
++	      offset:0,
++      size:4 * 1024 * 1024},
++	{
++	      name:"RouterBoard NAND Main",
++	      offset:MTDPART_OFS_NXTBLK,
++      size:MTDPART_SIZ_FULL}
 +};
 +
 +static struct mtd_info rmtd;
@@ -174,64 +113,50 @@ index 0000000..6f7452a
 +
 +static unsigned init_ok = 0;
 +
-+unsigned get_rbnand_block_size(void) {
-+	if (init_ok) return rmtd.oobblock; else return 0;
++unsigned get_rbnand_block_size(void)
++{
++	if (init_ok)
++		return rmtd.writesize;
++	else
++		return 0;
 +}
 +
 +EXPORT_SYMBOL(get_rbnand_block_size);
 +
-+int __init rbmips_init(void) {
++int __init rbmips_init(void)
++{
++	int *b;
 +	memset(&rmtd, 0, sizeof(rmtd));
 +	memset(&rnand, 0, sizeof(rnand));
-+/*
-+	if (is_rb500()) {
-+		if (is_rb400()) {
-+			printk("RB400 nand\n");
-+			MEM32(IDT434_REG_BASE + GPIOD) |= GPIO_WPX;
-+			MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_CLE;
-+			MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_ALE;
-+			rnand.hwcontrol = rbmips_hwcontrol400;
-+		} else {
-+*/		
-+			printk("RB500 nand\n");
-+			changeLatchU5(LO_WPX | LO_FOFF | LO_CEX,
-+				      LO_ULED | LO_ALE | LO_CLE);
-+			rnand.hwcontrol = rbmips_hwcontrol500;
-+//		}
-+    
-+		rnand.dev_ready = rb500_dev_ready;
-+		rnand.IO_ADDR_W = (unsigned char *)
-+			KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
-+		rnand.IO_ADDR_R = rnand.IO_ADDR_W;
-+/*	} else if (is_rb100()) {
-+		printk("RB100 nand\n");
-+		MEM32(0xB2000064) = 0x100;
-+		MEM32(0xB2000008) = 0x1;
-+		SMEM1(NAND_SET_SPn) = 0x01; 
-+		SMEM1(NAND_CLR_WPn) = 0x01; 
-+		rnand.IO_ADDR_R = (unsigned char *)KSEG1ADDR(SMEM1_BASE);
-+		rnand.IO_ADDR_W = rnand.IO_ADDR_R;
-+		rnand.hwcontrol = rbmips_hwcontrol100;
-+		rnand.dev_ready = rb100_dev_ready;
-+	}
-+*/
-+	p_nand = (void __iomem *)ioremap(( void*)0x18a20000, 0x1000);
++
++	printk("RB500 nand\n");
++	changeLatchU5(LO_WPX | LO_FOFF | LO_CEX,
++		      LO_ULED | LO_ALE | LO_CLE);
++	rnand.cmd_ctrl = rbmips_hwcontrol500;
++
++	rnand.dev_ready = rb500_dev_ready;
++	rnand.IO_ADDR_W = (unsigned char *)
++	    KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
++	rnand.IO_ADDR_R = rnand.IO_ADDR_W;
++
++	p_nand = (void __iomem *) ioremap((void *) 0x18a20000, 0x1000);
 +	if (!p_nand) {
 +		printk("RBnand Unable ioremap buffer");
 +		return -ENXIO;
 +	}
-+	rnand.eccmode = NAND_ECC_SOFT;
++	rnand.ecc.mode = NAND_ECC_SOFT;
 +	rnand.chip_delay = 25;
 +	rnand.options |= NAND_NO_AUTOINCR;
 +	rmtd.priv = &rnand;
 +
-+	int *b = ( int *)KSEG1ADDR( 0x18010020);
-+	printk( "dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[ 0], b[ 1], b[ 2], b[ 3]);
++	b = (int *) KSEG1ADDR(0x18010020);
++	printk("dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[0],
++	       b[1], b[2], b[3]);
 +
 +	if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)
-+	    && nand_scan(&rmtd, 1)  && nand_scan(&rmtd, 1)) {
++	    && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
 +		printk("RBxxx nand device not found");
-+		iounmap ((void *)p_nand);
++		iounmap((void *) p_nand);
 +		return -ENXIO;
 +	}
 +
@@ -241,8 +166,3 @@ index 0000000..6f7452a
 +}
 +
 +module_init(rbmips_init);
-+
-+
-+
-+
-+