aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorÓscar García Amor <ogarcia@connectical.com>2022-09-20 13:24:43 +0200
committerHauke Mehrtens <hauke@hauke-m.de>2022-11-12 18:15:55 +0100
commit62efb34071cff2e15bff85b00040520dad7d6097 (patch)
tree8d1ec29454e1c06b1403ae624b57f29d5c4daff8 /target/linux/ramips
parent18801f26485e3a0dcb79dc9f9b174aed5821b758 (diff)
downloadupstream-62efb34071cff2e15bff85b00040520dad7d6097.tar.gz
upstream-62efb34071cff2e15bff85b00040520dad7d6097.tar.bz2
upstream-62efb34071cff2e15bff85b00040520dad7d6097.zip
ramips: add support for Cudy WR1300 v2
Specifications: - SoC: MediaTek MT7621AT - RAM: 128 MB (DDR3) - Flash: 16 MB (SPI NOR) - WiFi: MediaTek MT7603E, MediaTek MT7613BE - Switch: 1 WAN, 4 LAN (Gigabit) - Ports: 1 USB 3.0 - Buttons: Reset, WPS - LEDs: System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS - Power: DC 12V 1A tip positive Download and flash the manufacturer's built OpenWRT image available at http://www.cudytech.com/openwrt_software_download Install the new OpenWRT image via luci (System -> Backup/Flash firmware) Be sure to NOT keep settings. The force upgrade may need to be checked due to differences in router naming conventions. Recovery: - Loads only signed manufacture firmware due to bootloader RSA verification - serve tftp-recovery image as /recovery.bin on 192.168.1.88/24 - connect to any lan ethernet port - power on the device while holding the reset button - wait at least 8 seconds before releasing reset button for image to download - See http://www.cudytech.com/newsinfo/547425.html Signed-off-by: Óscar García Amor <ogarcia@connectical.com>
Diffstat (limited to 'target/linux/ramips')
-rw-r--r--target/linux/ramips/dts/mt7621_cudy_wr1300-v1.dts (renamed from target/linux/ramips/dts/mt7621_cudy_wr1300.dts)4
-rw-r--r--target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts199
-rw-r--r--target/linux/ramips/image/mt7621.mk17
3 files changed, 216 insertions, 4 deletions
diff --git a/target/linux/ramips/dts/mt7621_cudy_wr1300.dts b/target/linux/ramips/dts/mt7621_cudy_wr1300-v1.dts
index 2398612847..4062c46e3e 100644
--- a/target/linux/ramips/dts/mt7621_cudy_wr1300.dts
+++ b/target/linux/ramips/dts/mt7621_cudy_wr1300-v1.dts
@@ -6,8 +6,8 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- compatible = "cudy,wr1300", "mediatek,mt7621-soc";
- model = "Cudy WR1300";
+ compatible = "cudy,wr1300-v1", "mediatek,mt7621-soc";
+ model = "Cudy WR1300 v1";
aliases {
led-boot = &led_sys;
diff --git a/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts b/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
new file mode 100644
index 0000000000..5c8b047e76
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "cudy,wr1300-v2", "mediatek,mt7621-soc";
+ model = "Cudy WR1300 v2";
+
+ aliases {
+ led-boot = &led_sys;
+ led-failsafe = &led_sys;
+ led-running = &led_sys;
+ led-upgrade = &led_sys;
+ label-mac-device = &gmac0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_sys: sys {
+ label = "green:sys";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@fd0000 {
+ label = "debug";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "backup";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ bdinfo: partition@ff0000 {
+ label = "bdinfo";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ nvmem-cells = <&macaddr_bdinfo_de00>;
+ nvmem-cell-names = "mac-address";
+ };
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ nvmem-cells = <&macaddr_bdinfo_de00>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <2>;
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_bdinfo_de00>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <&ethphy4>;
+
+ nvmem-cells = <&macaddr_bdinfo_de00>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+};
+
+&mdio {
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan1";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "wdt", "i2c", "jtag";
+ function = "gpio";
+ };
+};
+
+&bdinfo {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_bdinfo_de00: macaddr@de00 {
+ reg = <0xde00 0x6>;
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 2e7d0689be..de10da7cb6 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -444,15 +444,28 @@ define Device/bolt_arion
endef
TARGET_DEVICES += bolt_arion
-define Device/cudy_wr1300
+define Device/cudy_wr1300-v1
$(Device/dsa-migration)
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR1300
+ DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb2 kmod-usb3 \
kmod-usb-ledtrig-usbport
+ SUPPORTED_DEVICES += cudy,wr1300 R10
+endef
+TARGET_DEVICES += cudy_wr1300-v1
+
+define Device/cudy_wr1300-v2
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 15872k
+ DEVICE_VENDOR := Cudy
+ DEVICE_MODEL := WR1300
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
+ SUPPORTED_DEVICES += cudy,wr1300 R23
endef
-TARGET_DEVICES += cudy_wr1300
+TARGET_DEVICES += cudy_wr1300-v2
define Device/cudy_wr2100
$(Device/dsa-migration)