aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-06-09 11:52:26 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-06-11 01:51:34 +0200
commite6d4744f9ad0f76ddf1cded75355e240e81be41e (patch)
tree9f68a39121883dcbea735ff468ece495729da027 /target/linux/ramips
parent78e8360878d716c75fc98d6f93bdd61f156caa28 (diff)
downloadupstream-e6d4744f9ad0f76ddf1cded75355e240e81be41e.tar.gz
upstream-e6d4744f9ad0f76ddf1cded75355e240e81be41e.tar.bz2
upstream-e6d4744f9ad0f76ddf1cded75355e240e81be41e.zip
ramips: fix WAN LED for D-Link DIR-810L/TRENDnet TEW-810DR
The WAN LED on DIR-810L was actually blinking on LAN1 port activity. This has already been improved for the TEW-810DR, where the GPIO has been set up explicitly rather than having it controlled by the switch. This patch also applies this setup to the DIR-810L. In addition, the trigger in 01_leds is set up with ucidef_set_led_switch for both devices now, so state changes should be displayed correctly as well. Reported-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [DIR-810L] Tested-by: J. Scott Heppler <shep971@centurylink.net> [TEW-810DR]
Diffstat (limited to 'target/linux/ramips')
-rw-r--r--target/linux/ramips/dts/mt7620a_cameo_810.dtsi8
-rw-r--r--target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts16
-rw-r--r--target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts8
-rwxr-xr-xtarget/linux/ramips/mt7620/base-files/etc/board.d/01_leds7
4 files changed, 19 insertions, 20 deletions
diff --git a/target/linux/ramips/dts/mt7620a_cameo_810.dtsi b/target/linux/ramips/dts/mt7620a_cameo_810.dtsi
index 8ab166d283..adbb4cf65c 100644
--- a/target/linux/ramips/dts/mt7620a_cameo_810.dtsi
+++ b/target/linux/ramips/dts/mt7620a_cameo_810.dtsi
@@ -93,6 +93,14 @@
mediatek,portmap = "llllw";
};
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
&wmac {
pinctrl-names = "default";
pinctrl-0 = <&pa_pins>;
diff --git a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts
index 63952d3e64..9dd9825433 100644
--- a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts
+++ b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts
@@ -22,11 +22,16 @@
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
- wan {
+ wan_orange {
label = "dir-810l:orange:wan";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
+ wan_green {
+ label = "dir-810l:green:wan";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
power_orange {
label = "dir-810l:orange:power";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
@@ -36,14 +41,7 @@
&state_default {
gpio {
- groups = "i2c", "uartf";
+ groups = "i2c", "uartf", "ephy";
function = "gpio";
};
};
-
-&gsw {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
-
- mediatek,port4 = "ephy";
-};
diff --git a/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts b/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts
index 679b429b6d..7437cde073 100644
--- a/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts
+++ b/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts
@@ -46,11 +46,3 @@
function = "gpio";
};
};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&gpio2 {
- status = "okay";
-};
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
index e7b9413a48..2b2ac6b46b 100755
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
@@ -54,6 +54,10 @@ comfast,cf-wr800n)
ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
set_wifi_led "$boardname:white:wifi"
;;
+dlink,dir-810l|\
+trendnet,tew-810dr)
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
+ ;;
dlink,dwr-116-a1|\
head-weblink,hdrm200|\
ohyeah,oy-0001|\
@@ -191,9 +195,6 @@ tplink,archer-mr200)
tplink,re200-v1)
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
;;
-trendnet,tew-810dr)
- ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" "eth0.2"
- ;;
youku,yk1)
set_wifi_led "$boardname:blue:air"
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"