ramips: initial support for Sitecom WL-351 v1 002

This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604

13 files changed, 209 insertions, 5 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index a150cc26d8..edb8376cdd 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -66,6 +66,9 @@ get_status_led() {
 	whr-g300n)
 		status_led="whr-g300n:green:router"
 		;;
+	wl-351)
+		status_led="wl-351:amber:power"
+		;;
 	esac
 }
 
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index fa6607fd7f..a1d4887ecb 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -59,6 +59,7 @@ case "$FIRMWARE" in
 	v22rw-2x2 | \
 	wcr-150gn | \
 	whr-g300n | \
+	wl-351 | \
 	wr512-3gn)
 		rt2x00_eeprom_extract "factory" 0 272
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index bb1d90ef48..60dd716080 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -23,6 +23,13 @@ ramips_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		;;
 
+	wl-351)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "rtl8366rb" "1" "1"
+		ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
+		ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
+		;;
+
 	rt-n15)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "rtl8366s" "1" "1"
@@ -56,7 +63,8 @@ ramips_setup_macs()
 	argus-atp52b | \
 	b2c | \
 	nw718 | \
-	rt-n15)
+	rt-n15 | \
+	wl-351)
 		lan_mac=$(ramips_get_mac_binary factory 4)
 		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 		;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index faed42162c..4dc10aeb22 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -104,6 +104,9 @@ ramips_board_name() {
 	*"WHR-G300N")
 		name="whr-g300n"
 		;;
+	*"Sitecom WL-351 v1 002")
+		name="wl-351"
+		;;
 	*"WZR-AGL300NH")
 		name="wzr-agl300nh"
 		;;
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index 4076d6c500..712976082b 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -38,5 +38,6 @@ enum ramips_mach_type {
 	RAMIPS_MACH_V22RW_2X2,		/* Ralink AP-RT3052-V22RW-2X2 */
 	RAMIPS_MACH_WCR150GN,		/* Sparklan WCR-150GN */
 	RAMIPS_MACH_WHR_G300N,		/* Buffalo WHR-G300N */
+	RAMIPS_MACH_WL351,		/* Sitecom WL-351 v1 002 */
 	RAMIPS_MACH_WR512_3GN,		/* SH-WR512NU/WS-WR512N1-like 3GN*/
 };
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
index 97ee375eb7..9634322d14 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
@@ -13,6 +13,7 @@
 
 enum {
 	RT305X_ESW_VLAN_CONFIG_NONE = 0,
+	RT305X_ESW_VLAN_CONFIG_BYPASS,
 	RT305X_ESW_VLAN_CONFIG_LLLLW,
 	RT305X_ESW_VLAN_CONFIG_WLLLL,
 };
@@ -20,6 +21,8 @@ enum {
 struct rt305x_esw_platform_data
 {
 	u8 vlan_config;
+	u32 reg_initval_fct2;
+	u32 reg_initval_fpa2;
 };
 
 #endif /* _RT305X_ESW_PLATFORM_H */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index 3e58242161..3149af4c88 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -76,6 +76,11 @@ config RT305X_MACH_V22RW_2X2
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
 
+config RT305X_MACH_WL351
+	bool "Sitecom WL-351 support"
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 config RT305X_MACH_WCR150GN
 	bool "Sparklan WCR-150GN support"
 	select RALINK_DEV_GPIO_BUTTONS
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index 5da73155f9..2778f54f05 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -28,4 +28,4 @@ obj-$(CONFIG_RT305X_MACH_V22RW_2X2)	+= mach-v22rw-2x2.o
 obj-$(CONFIG_RT305X_MACH_WCR150GN)	+= mach-wcr150gn.o
 obj-$(CONFIG_RT305X_MACH_WHR_G300N)	+= mach-whr-g300n.o
 obj-$(CONFIG_RT305X_MACH_WR512_3GN)	+= mach-wr512-3gn.o
-
+obj-$(CONFIG_RT305X_MACH_WL351)		+= mach-wl351.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c
index 5dfbddbf2b..615f32dacc 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c
@@ -24,6 +24,7 @@
 #include "devices.h"
 
 #include <ramips_eth_platform.h>
+#include <rt305x_esw_platform.h>
 
 static struct resource rt305x_flash0_resources[] = {
 	{
@@ -142,7 +143,12 @@ static struct resource rt305x_esw_resources[] = {
 	},
 };
 
-struct rt305x_esw_platform_data rt305x_esw_data;
+struct rt305x_esw_platform_data rt305x_esw_data = {
+	.vlan_config		= RT305X_ESW_VLAN_CONFIG_NONE,
+	.reg_initval_fct2	= 0x00d6500c,
+	.reg_initval_fpa2	= 0x3f502b28,
+};
+
 static struct platform_device rt305x_esw_device = {
 	.name		= "rt305x-esw",
 	.resource	= rt305x_esw_resources,
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c
new file mode 100644
index 0000000000..3ebc7fee8b
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c
@@ -0,0 +1,156 @@
+/*
+ *  Sitecom WL-351 v1 002 board support
+ *
+ *  Copyright (C) 2011 Tobias Diedrich <ranma+openwrt@tdiedrich.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define WL351_GPIO_LED_POWER_AMBER		8
+#define WL351_GPIO_LED_UNPOPULATED_AMBER	12
+#define WL351_GPIO_LED_UNPOPULATED_BLUE		13
+
+#define WL351_GPIO_BUTTON_RESET	10
+#define WL351_GPIO_BUTTON_WPS	0
+
+#define WL351_BUTTONS_POLL_INTERVAL	20
+
+
+static struct gpio_led wl351_leds_gpio[] __initdata = {
+	{
+		.name		= "wl-351:amber:power",
+		.gpio		= WL351_GPIO_LED_POWER_AMBER,
+		.active_low	= 1,
+	}, {
+		.name		= "wl-351:amber:unpopulated",
+		.gpio		= WL351_GPIO_LED_UNPOPULATED_AMBER,
+		.active_low	= 1,
+	}, {
+		.name		= "wl-351:blue:unpopulated",
+		.gpio		= WL351_GPIO_LED_UNPOPULATED_BLUE,
+		.active_low	= 1,
+	}
+};
+
+
+static struct gpio_button wl351_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= WL351_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= WL351_GPIO_BUTTON_WPS,
+		.active_low	= 1,
+	}
+};
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wl351_partitions[] = {
+	{
+		.name	= "u-boot",
+		.offset	= 0,
+		.size	= 0x030000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "u-boot-env",
+		.offset	= 0x030000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "factory",
+		.offset	= 0x040000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "kernel",
+		.offset	= 0x050000,
+		.size	= 0x110000,
+	}, {
+		.name	= "rootfs",
+		.offset	= 0x160000,
+		.size	= 0x230000,
+	}, {
+		.name	= "user (jffs2)",
+		.offset	= 0x3F0000,
+		.size	= 0x010000,
+	}, {
+		.name	= "firmware",
+		.offset	= 0x050000,
+		.size	= 0x3a0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data wl351_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(wl351_partitions),
+	.parts		= wl351_partitions,
+#endif
+};
+
+
+static struct rtl8366_platform_data wl351_switch_data = {
+	.gpio_sda	= RT305X_GPIO_I2C_SD,
+	.gpio_sck	= RT305X_GPIO_I2C_SCLK,
+};
+
+static struct platform_device wl351_switch = {
+	.name		= RTL8366RB_DRIVER_NAME,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &wl351_switch_data,
+	}
+};
+
+static void __init wl351_init(void)
+{
+	rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
+				RT305X_GPIO_MODE_UART0_SHIFT) |
+				RT305X_GPIO_MODE_I2C |
+				RT305X_GPIO_MODE_SPI |
+				RT305X_GPIO_MODE_MDIO);
+	rt305x_register_flash(0, &wl351_flash_data);
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(wl351_leds_gpio),
+						wl351_leds_gpio);
+	ramips_register_gpio_buttons(-1, WL351_BUTTONS_POLL_INTERVAL,
+				     ARRAY_SIZE(wl351_gpio_buttons),
+				     wl351_gpio_buttons);
+	// external rtl8366rb
+	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_BYPASS;
+	rt305x_esw_data.reg_initval_fct2 = 0x0002500c;
+	rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff;
+	rt305x_register_ethernet();
+	platform_device_register(&wl351_switch);
+	rt305x_register_wifi();
+	rt305x_register_wdt();
+	rt305x_register_usb();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_WL351, "WL-351", "Sitecom WL-351 v1 002",
+	     wl351_init);
diff --git a/target/linux/ramips/files/drivers/net/ramips_esw.c b/target/linux/ramips/files/drivers/net/ramips_esw.c
index 027284b084..a2fa579d8b 100644
--- a/target/linux/ramips/files/drivers/net/ramips_esw.c
+++ b/target/linux/ramips/files/drivers/net/ramips_esw.c
@@ -218,7 +218,7 @@ rt305x_esw_hw_init(struct rt305x_esw *esw)
 		       (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC3_UNTAG_EN_S)),
 		      RT305X_ESW_REG_POC3);
 
-	rt305x_esw_wr(esw, 0x00d6500c, RT305X_ESW_REG_FCT2);
+	rt305x_esw_wr(esw, esw->pdata->reg_initval_fct2, RT305X_ESW_REG_FCT2);
 	rt305x_esw_wr(esw, 0x0008a301, RT305X_ESW_REG_SGC);
 
 	/* Setup SoC Port control register */
@@ -229,7 +229,7 @@ rt305x_esw_hw_init(struct rt305x_esw *esw)
 		       (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
 		      RT305X_ESW_REG_SOCPC);
 
-	rt305x_esw_wr(esw, 0x3f502b28, RT305X_ESW_REG_FPA2);
+	rt305x_esw_wr(esw, esw->pdata->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
 	rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_FPA);
 
 	/* Force Link/Activity on ports */
@@ -277,6 +277,18 @@ rt305x_esw_hw_init(struct rt305x_esw *esw)
 	case RT305X_ESW_VLAN_CONFIG_NONE:
 		break;
 
+	case RT305X_ESW_VLAN_CONFIG_BYPASS:
+		/* Pass all vlan tags to all ports */
+		for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
+			rt305x_esw_set_vlan_id(esw, i, i+1);
+			rt305x_esw_set_vmsc(esw, i, RT305X_ESW_PORTS_ALL);
+		}
+		/* Disable VLAN TAG removal, keep aging on. */
+		rt305x_esw_wr(esw,
+			      RT305X_ESW_PORTS_ALL << RT305X_ESW_POC3_ENAGING_S,
+			      RT305X_ESW_REG_POC3);
+		break;
+
 	case RT305X_ESW_VLAN_CONFIG_LLLLW:
 		rt305x_esw_set_vlan_id(esw, 0, 1);
 		rt305x_esw_set_vlan_id(esw, 1, 2);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 12487854d5..8f4e211255 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -179,6 +179,10 @@ define Image/Build/Profile/NBG419N
 	$(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N)
 endef
 
+define Image/Build/Profile/WL351
+	$(call Image/Build/Template/GENERIC_4M,$(1),wl-351,WL-351)
+endef
+
 define Image/Build/Profile/NW718
 	$(call Image/Build/Template/NW718,$(1),nw718,NW718)
 endef
@@ -271,6 +275,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/HW5503G,$(1))
 	$(call Image/Build/Profile/MOFI35003GN,$(1))
 	$(call Image/Build/Profile/WR5123GN,$(1))
+	$(call Image/Build/Profile/WL351,$(1))
 endef
 endif
 
diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39
index 2a5473dfb2..68d9a23693 100644
--- a/target/linux/ramips/rt305x/config-2.6.39
+++ b/target/linux/ramips/rt305x/config-2.6.39
@@ -107,6 +107,7 @@ CONFIG_RT305X_MACH_RT_G32_REVB=y
 CONFIG_RT305X_MACH_V22RW_2X2=y
 CONFIG_RT305X_MACH_WCR150GN=y
 CONFIG_RT305X_MACH_WHR_G300N=y
+CONFIG_RT305X_MACH_WL351=y
 CONFIG_RT305X_MACH_WR512_3GN=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=4