aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorDmytro Oz <sequentiality@gmail.com>2020-12-14 21:07:32 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-01-21 22:53:19 +0100
commitc2a7bb520a0fb107984ad3757174d391796cd222 (patch)
tree22f95cc0940da31697af8edf9b197ea810f0f91a /target/linux/ramips
parent93be5926a2c2ebda05486a43f998a2ee38d32e61 (diff)
downloadupstream-c2a7bb520a0fb107984ad3757174d391796cd222.tar.gz
upstream-c2a7bb520a0fb107984ad3757174d391796cd222.tar.bz2
upstream-c2a7bb520a0fb107984ad3757174d391796cd222.zip
ramips: mt7621: add support for Xiaomi Mi Router 4
Xiaomi Mi Router 4 is the same as Xiaomi Mi Router 3G, except for the RAM (256Mib→128Mib), LEDs and gpio (MiNet button). Specifications: Power: 12 VDC, 1 A Connector type: barrel CPU1: MediaTek MT7621A (880 MHz, 4 cores) FLA1: 128 MiB (ESMT F59L1G81MA) RAM1: 128 MiB (ESMT M15T1G1664A) WI1 chip1: MediaTek MT7603EN WI1 802dot11 protocols: bgn WI1 MIMO config: 2x2:2 WI1 antenna connector: U.FL WI2 chip1: MediaTek MT7612EN WI2 802dot11 protocols: an+ac WI2 MIMO config: 2x2:2 WI2 antenna connector: U.FL ETH chip1: MediaTek MT7621A Switch: MediaTek MT7621A UART Serial [o] TX [o] GND [o] RX [ ] VCC - Do not connect it MAC addresses as verified by OEM firmware: use address source LAN *:c2 factory 0xe000 (label) WAN *:c3 factory 0xe006 2g *:c4 factory 0x0000 5g *:c5 factory 0x8000 Flashing instructions: 1.Create a simple http server (nginx etc) 2.set uart enable To enable writing to the console, you must reset to factory settings Then you see uboot boot, press the keyboard 4 button (enter uboot command line) If it is not successful, repeat the above operation of restoring the factory settings. After entering the uboot command line, type: setenv uart_en 1 saveenv boot 3.use shell in uart cd /tmp wget http://"your_computer_ip:80"/openwrt-ramips-mt7621-xiaomi_mir4-squashfs-kernel1.bin wget http://"your_computer_ip:80"/openwrt-ramips-mt7621-xiaomi_mir4-squashfs-rootfs0.bin mtd write openwrt-ramips-mt7621-xiaomi_mir4-squashfs-kernel1.bin kernel1 mtd write openwrt-ramips-mt7621-xiaomi_mir4-squashfs-rootfs0.bin rootfs0 nvram set flag_try_sys1_failed=1 nvram commit reboot 4.login to the router http://192.168.1.1/ Installation via Software exploit Find the instructions in the https://github.com/acecilia/OpenWRTInvasion Signed-off-by: Dmytro Oz <sequentiality@gmail.com> [commit message facelift, rebase onto shared DTSI/common device definition, bump uboot-envtools] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips')
-rw-r--r--target/linux/ramips/dts/mt7621_xiaomi_mi-router-4.dts96
-rw-r--r--target/linux/ramips/image/mt7621.mk8
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh1
4 files changed, 106 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_xiaomi_mi-router-4.dts b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-4.dts
new file mode 100644
index 0000000000..f8fc01ee30
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-4.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_xiaomi_nand_128m.dtsi"
+
+/ {
+ compatible = "xiaomi,mi-router-4", "mediatek,mt7621-soc";
+ model = "Xiaomi Mi Router 4";
+
+ aliases {
+ led-boot = &led_status_yellow;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_yellow;
+ label-mac-device = &gmac0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_yellow: status_yellow {
+ label = "yellow:status";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&keys {
+ minet {
+ label = "minet";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "pci14c3,7603";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ ieee80211-freq-limit = <2400000 2500000>;
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "pci14c3,7662";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&gmac0 {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&switch0 {
+ ports {
+ port@1 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&factory 0xe006>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "jtag", "uart2", "uart3", "wdt";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index ff39cbf39a..005a9bdc55 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1277,6 +1277,14 @@ define Device/xiaomi_mi-router-3-pro
endef
TARGET_DEVICES += xiaomi_mi-router-3-pro
+define Device/xiaomi_mi-router-4
+ $(Device/xiaomi_nand_separate)
+ DEVICE_MODEL := Mi Router 4
+ IMAGE_SIZE := 124416k
+ DEVICE_PACKAGES += kmod-mt7603 kmod-mt76x2
+endef
+TARGET_DEVICES += xiaomi_mi-router-4
+
define Device/xiaomi_mi-router-4a-gigabit
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 83c4162e2f..154f218bfe 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -19,6 +19,7 @@ ramips_setup_interfaces()
mikrotik,routerboard-m33g|\
xiaomi,mi-router-3g|\
xiaomi,mi-router-3g-v2|\
+ xiaomi,mi-router-4|\
xiaomi,mi-router-4a-gigabit)
ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
;;
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 99ed36e429..5bb0386253 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -63,6 +63,7 @@ platform_do_upgrade() {
netis,wf2881|\
xiaomi,mi-router-3g|\
xiaomi,mi-router-3-pro|\
+ xiaomi,mi-router-4|\
xiaomi,mi-router-ac2100|\
xiaomi,redmi-router-ac2100)
nand_do_upgrade "$1"