aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorJosh Bendavid <joshbendavid@gmail.com>2020-07-14 17:39:21 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-09-06 19:09:45 +0200
commitb5dd746cbb1aaf91f4b68e9f3eda97413550d904 (patch)
treedcbf209df9d704941f150f930479b948621c2479 /target/linux/ramips
parentba72ed537c4a063e1143b9efae579112fee7c42a (diff)
downloadupstream-b5dd746cbb1aaf91f4b68e9f3eda97413550d904.tar.gz
upstream-b5dd746cbb1aaf91f4b68e9f3eda97413550d904.tar.bz2
upstream-b5dd746cbb1aaf91f4b68e9f3eda97413550d904.zip
ramips: add support for D-Link DIR-2660 A1
This patch adds support for D-Link DIR-2660 A1. Specifications: * Board: AP-MTKH7-0002 * SoC: MediaTek MT7621AT * RAM: 256 MB (DDR3) * Flash: 128 MB (NAND) * WiFi: MediaTek MT7615N (x2) * Switch: 1 WAN, 4 LAN (Gigabit) * Ports: 1 USB 2.0, 1 USB 3.0 * Buttons: Reset, WPS * LEDs: Power (white/orange), Internet (white/orange), WiFi 2.4G (white), WiFi 5G (white), USB 3.0 (white), USB 2.0 (white) Notes: * WiFi 2.4G and WiFi 5G LEDs are wired directly to the wireless chips Installation: * D-Link Recovery GUI: power down the router, press and hold the reset button, then re-plug it. Keep the reset button pressed until the power LED starts flashing orange, manually assign a static IP address under the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1 * Some modern browsers may have problems flashing via the Recovery GUI, if that occurs consider uploading the firmware through cURL: curl -v -i -F "firmware=@file.bin" 192.168.0.1 MAC addresses: lan factory 0xe000 *:a7 (label) wan factory 0xe006 *:aa 2.4 factory 0xe000 +1 *:a8 5.0 factory 0xe000 +2 *:a9 Seems like vendor didn't replace the dummy entries in the calibration data. Signed-off-by: Josh Bendavid <joshbendavid@gmail.com> [rebase onto already merged DIR-1960 A1, add MAC addresses to commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips')
-rw-r--r--target/linux/ramips/dts/mt7621_dlink_dir-2660-a1.dts64
-rw-r--r--target/linux/ramips/image/mt7621.mk7
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh1
4 files changed, 74 insertions, 1 deletions
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-2660-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-2660-a1.dts
new file mode 100644
index 0000000000..d15529b0c4
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-2660-a1.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621_dlink_dir-xx60-a1.dtsi"
+
+/ {
+ compatible = "dlink,dir-2660-a1", "mediatek,mt7621-soc";
+ model = "D-Link DIR-2660 A1";
+
+ aliases {
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_white;
+ led-running = &led_power_white;
+ led-upgrade = &led_net_orange;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_orange: power_orange {
+ label = "dir-2660-a1:orange:power";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_white: power_white {
+ label = "dir-2660-a1:white:power";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led_net_orange: net_orange {
+ label = "dir-2660-a1:orange:net";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ net_white {
+ label = "dir-2660-a1:white:net";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2_white {
+ label = "dir-2660-a1:white:usb2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ehci_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb3_white {
+ label = "dir-2660-a1:white:usb3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&xhci_ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+};
+
+&wifi0 {
+ mtd-mac-address = <&factory 0xe000>;
+ mtd-mac-address-increment = <1>;
+};
+
+&wifi1 {
+ mtd-mac-address = <&factory 0xe000>;
+ mtd-mac-address-increment = <2>;
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index d2d41be269..e43b19ca94 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -275,6 +275,13 @@ define Device/dlink_dir-1960-a1
endef
TARGET_DEVICES += dlink_dir-1960-a1
+define Device/dlink_dir-2660-a1
+ $(Device/dlink_dir-xx60-a1)
+ DEVICE_MODEL := DIR-2660
+ DEVICE_VARIANT := A1
+endef
+TARGET_DEVICES += dlink_dir-2660-a1
+
define Device/dlink_dir-860l-b1
$(Device/dsa-migration)
$(Device/seama)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 8708de33c1..c5cd446809 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -26,7 +26,8 @@ d-team,pbr-m1|\
gehua,ghl-r-001)
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
;;
-dlink,dir-1960-a1)
+dlink,dir-1960-a1|\
+dlink,dir-2660-a1)
ucidef_set_led_netdev "wan" "wan" "$boardname:white:net" "wan"
;;
dlink,dir-860l-b1|\
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 90749f589b..b1feea7ae6 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -46,6 +46,7 @@ platform_do_upgrade() {
asus,rt-ac65p|\
asus,rt-ac85p|\
dlink,dir-1960-a1|\
+ dlink,dir-2660-a1|\
hiwifi,hc5962|\
linksys,ea7300-v1|\
linksys,ea7500-v2|\