ramips: remove 2.6.3[24] support

SVN-Revision: 24562

16 files changed, 0 insertions, 1174 deletions

diff --git a/target/linux/ramips/patches-2.6.32/001-mips-add-cp0-compare-irq-function.patch b/target/linux/ramips/patches-2.6.32/001-mips-add-cp0-compare-irq-function.patch
deleted file mode 100644
index babe906eb1..0000000000
--- a/target/linux/ramips/patches-2.6.32/001-mips-add-cp0-compare-irq-function.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -48,6 +48,7 @@
- #include <asm/types.h>
- #include <asm/stacktrace.h>
- #include <asm/irq.h>
-+#include <asm/time.h>
- 
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1537,6 +1538,8 @@ void __cpuinit per_cpu_trap_init(void)
- 	 */
- 	if (cpu_has_mips_r2) {
- 		cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+		if (get_c0_compare_irq)
-+			cp0_compare_irq = get_c0_compare_irq();
- 		cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
- 		if (cp0_perfcount_irq == cp0_compare_irq)
- 			cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
-  */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
- 
diff --git a/target/linux/ramips/patches-2.6.32/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch b/target/linux/ramips/patches-2.6.32/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
deleted file mode 100644
index 22aefe0d46..0000000000
--- a/target/linux/ramips/patches-2.6.32/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1568,7 +1568,7 @@ static int __xipram do_erase_chip(struct
- 			chip->erase_suspended = 0;
- 		}
- 
--		if (chip_ready(map, adr))
-+		if (chip_good(map, adr, map_word_ff(map)))
- 			break;
- 
- 		if (time_after(jiffies, timeo)) {
-@@ -1656,7 +1656,7 @@ static int __xipram do_erase_oneblock(st
- 			chip->erase_suspended = 0;
- 		}
- 
--		if (chip_ready(map, adr)) {
-+		if (chip_good(map, adr, map_word_ff(map))) {
- 			xip_enable(map, chip, adr);
- 			break;
- 		}
diff --git a/target/linux/ramips/patches-2.6.32/100-mips-ralink-core.patch b/target/linux/ramips/patches-2.6.32/100-mips-ralink-core.patch
deleted file mode 100644
index 10d329ca05..0000000000
--- a/target/linux/ramips/patches-2.6.32/100-mips-ralink-core.patch
+++ /dev/null
@@ -1,58 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -156,6 +156,26 @@ ifeq (,$(findstring march=octeon, $(cfla
- cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
- endif
- 
-+#
-+# Ralink SoC common stuff
-+#
-+core-$(CONFIG_MIPS_RALINK)	+= arch/mips/ralink/common/
-+cflags-$(CONFIG_MIPS_RALINK)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink
-+
-+#
-+# Ralink RT288x
-+#
-+core-$(CONFIG_RALINK_RT288X)	+= arch/mips/ralink/rt288x/
-+cflags-$(CONFIG_RALINK_RT288X)	+= -I$(srctree)//arch/mips/include/asm/mach-ralink/rt288x
-+load-$(CONFIG_RALINK_RT288X)	+= 0xffffffff88000000
-+
-+#
-+# Ralink RT305x
-+#
-+core-$(CONFIG_RALINK_RT305X)	+= arch/mips/ralink/rt305x/
-+cflags-$(CONFIG_RALINK_RT305X)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
-+load-$(CONFIG_RALINK_RT305X)	+= 0xffffffff80000000
-+
- cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
- cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
- cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -43,6 +43,9 @@ config AR7
- 	  Support for the Texas Instruments AR7 System-on-a-Chip
- 	  family: TNETD7100, 7200 and 7300.
- 
-+config MIPS_RALINK
-+	bool "Ralink MIPS SoC based boards"
-+
- config BASLER_EXCITE
- 	bool "Basler eXcite smart camera"
- 	select CEVT_R4K
-@@ -679,6 +682,7 @@ source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/lasat/Kconfig"
- source "arch/mips/pmc-sierra/Kconfig"
-+source "arch/mips/ralink/Kconfig"
- source "arch/mips/sgi-ip27/Kconfig"
- source "arch/mips/sibyte/Kconfig"
- source "arch/mips/txx9/Kconfig"
-@@ -1045,7 +1049,7 @@ config BOOT_ELF32
- 
- config MIPS_L1_CACHE_SHIFT
- 	int
--	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
-+	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
- 	default "6" if MIPS_CPU_SCACHE
- 	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
- 	default "5"
diff --git a/target/linux/ramips/patches-2.6.32/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-2.6.32/101-rt288x_serial_driver_hack.patch
deleted file mode 100644
index 8e47aa3f10..0000000000
--- a/target/linux/ramips/patches-2.6.32/101-rt288x_serial_driver_hack.patch
+++ /dev/null
@@ -1,118 +0,0 @@
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -301,9 +301,9 @@ static const struct serial8250_config ua
- 	},
- };
- 
--#if defined (CONFIG_SERIAL_8250_AU1X00)
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
- 
--/* Au1x00 UART hardware has a weird register layout */
-+/* Au1x00 and RT288x UART hardware has a weird register layout */
- static const u8 au_io_in_map[] = {
- 	[UART_RX]  = 0,
- 	[UART_IER] = 2,
-@@ -421,7 +421,7 @@ static unsigned int mem32_serial_in(stru
- 	return readl(p->membase + offset);
- }
- 
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined(CONFIG_SERIAL_8250_AU1X00) || defined(CONFIG_SERIAL_8250_RT288X)
- static unsigned int au_serial_in(struct uart_port *p, int offset)
- {
- 	offset = map_8250_in_reg(p, offset) << p->regshift;
-@@ -502,7 +502,7 @@ static void set_io_from_upio(struct uart
- 		p->serial_out = mem32_serial_out;
- 		break;
- 
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
- 	case UPIO_AU:
- 		p->serial_in = au_serial_in;
- 		p->serial_out = au_serial_out;
-@@ -534,7 +534,7 @@ serial_out_sync(struct uart_8250_port *u
- 	switch (p->iotype) {
- 	case UPIO_MEM:
- 	case UPIO_MEM32:
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
- 	case UPIO_AU:
- #endif
- 	case UPIO_DWAPB:
-@@ -572,8 +572,8 @@ static inline void _serial_dl_write(stru
- 	serial_outp(up, UART_DLM, value >> 8 & 0xff);
- }
- 
--#if defined(CONFIG_SERIAL_8250_AU1X00)
--/* Au1x00 haven't got a standard divisor latch */
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
-+/* Au1x00 and RT288x haven't got a standard divisor latch */
- static int serial_dl_read(struct uart_8250_port *up)
- {
- 	if (up->port.iotype == UPIO_AU)
-@@ -780,22 +780,19 @@ static int size_fifo(struct uart_8250_po
-  */
- static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
- {
--	unsigned char old_dll, old_dlm, old_lcr;
-+	unsigned char old_lcr;
-+	unsigned int old_dl;
- 	unsigned int id;
- 
- 	old_lcr = serial_inp(p, UART_LCR);
- 	serial_outp(p, UART_LCR, UART_LCR_DLAB);
- 
--	old_dll = serial_inp(p, UART_DLL);
--	old_dlm = serial_inp(p, UART_DLM);
-+	old_dl = serial_dl_read(p);
- 
--	serial_outp(p, UART_DLL, 0);
--	serial_outp(p, UART_DLM, 0);
-+	serial_dl_write(p, 0);
-+	id = serial_dl_read(p);
- 
--	id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
--
--	serial_outp(p, UART_DLL, old_dll);
--	serial_outp(p, UART_DLM, old_dlm);
-+	serial_dl_write(p, old_dl);
- 	serial_outp(p, UART_LCR, old_lcr);
- 
- 	return id;
-@@ -1217,7 +1214,7 @@ static void autoconfig(struct uart_8250_
- 	}
- #endif
- 
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
- 	/* if access method is AU, it is a 16550 with a quirk */
- 	if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
- 		up->bugs |= UART_BUG_NOMSR;
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -266,6 +266,14 @@ config SERIAL_8250_AU1X00
- 	  say Y to this option. The driver can handle up to 4 serial ports,
- 	  depending on the SOC. If unsure, say N.
- 
-+config SERIAL_8250_RT288X
-+	bool "Ralink RT288x/RT305x serial port support"
-+	depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
-+	help
-+	  If you have a Ralink RT288x/RT305x SoC based board and want to use the 
-+	  serial port, say Y to this option. The driver can handle up to 2 serial 
-+	  ports. If unsure, say N.
-+
- config SERIAL_8250_RM9K
- 	bool "Support for MIPS RM9xxx integrated serial port"
- 	depends on SERIAL_8250 != n && SERIAL_RM9000
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -281,7 +281,7 @@ struct uart_port {
- #define UPIO_HUB6		(1)
- #define UPIO_MEM		(2)
- #define UPIO_MEM32		(3)
--#define UPIO_AU			(4)			/* Au1x00 type IO */
-+#define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
- #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
- #define UPIO_DWAPB		(6)			/* DesignWare APB UART */
- #define UPIO_RM9000		(7)			/* RM9000 type IO */
diff --git a/target/linux/ramips/patches-2.6.32/102-rt288x-pci-driver-hook.patch b/target/linux/ramips/patches-2.6.32/102-rt288x-pci-driver-hook.patch
deleted file mode 100644
index d2056c6465..0000000000
--- a/target/linux/ramips/patches-2.6.32/102-rt288x-pci-driver-hook.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capc
- obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= pci-octeon.o pcie-octeon.o
-+obj-$(CONFIG_SOC_RT288X)	+= pci-rt288x.o
- 
- ifdef CONFIG_PCI_MSI
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
diff --git a/target/linux/ramips/patches-2.6.32/103-ethernet.patch b/target/linux/ramips/patches-2.6.32/103-ethernet.patch
deleted file mode 100644
index 8b370b608a..0000000000
--- a/target/linux/ramips/patches-2.6.32/103-ethernet.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -602,6 +602,12 @@ config MIPS_AU1X00_ENET
- 	  If you have an Alchemy Semi AU1X00 based system
- 	  say Y.  Otherwise, say N.
- 
-+config MIPS_RAMIPS_NET
-+	tristate "Ethernet driver for rt288x/rt305x"
-+	depends on MIPS_RALINK
-+	help
-+	  This driver supports the etehrnet mac inside the ralink wisocs
-+
- config SGI_IOC3_ETH
- 	bool "SGI IOC3 Ethernet"
- 	depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -217,6 +217,7 @@ obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
- obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
- obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
-+obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o
- obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
- obj-$(CONFIG_DECLANCE) += declance.o
- obj-$(CONFIG_ATARILANCE) += atarilance.o
diff --git a/target/linux/ramips/patches-2.6.34/001-mips-add-cp0-compare-irq-function.patch b/target/linux/ramips/patches-2.6.34/001-mips-add-cp0-compare-irq-function.patch
deleted file mode 100644
index 6618a5d4c4..0000000000
--- a/target/linux/ramips/patches-2.6.34/001-mips-add-cp0-compare-irq-function.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -51,6 +51,7 @@
- #include <asm/stacktrace.h>
- #include <asm/irq.h>
- #include <asm/uasm.h>
-+#include <asm/time.h>
- 
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1506,6 +1507,8 @@ void __cpuinit per_cpu_trap_init(void)
- 	if (cpu_has_mips_r2) {
- 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
- 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+		if (get_c0_compare_irq)
-+			cp0_compare_irq = get_c0_compare_irq();
- 		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
- 		if (cp0_perfcount_irq == cp0_compare_irq)
- 			cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
-  */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
- 
diff --git a/target/linux/ramips/patches-2.6.34/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch b/target/linux/ramips/patches-2.6.34/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
deleted file mode 100644
index a4fb2352f2..0000000000
--- a/target/linux/ramips/patches-2.6.34/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1557,7 +1557,7 @@ static int __xipram do_erase_chip(struct
- 			chip->erase_suspended = 0;
- 		}
- 
--		if (chip_ready(map, adr))
-+		if (chip_good(map, adr, map_word_ff(map)))
- 			break;
- 
- 		if (time_after(jiffies, timeo)) {
-@@ -1645,7 +1645,7 @@ static int __xipram do_erase_oneblock(st
- 			chip->erase_suspended = 0;
- 		}
- 
--		if (chip_ready(map, adr)) {
-+		if (chip_good(map, adr, map_word_ff(map))) {
- 			xip_enable(map, chip, adr);
- 			break;
- 		}
diff --git a/target/linux/ramips/patches-2.6.34/100-mips-ralink-core.patch b/target/linux/ramips/patches-2.6.34/100-mips-ralink-core.patch
deleted file mode 100644
index 598a1556dc..0000000000
--- a/target/linux/ramips/patches-2.6.34/100-mips-ralink-core.patch
+++ /dev/null
@@ -1,58 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -181,6 +181,26 @@ ifeq (,$(findstring march=octeon, $(cfla
- cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
- endif
- 
-+#
-+# Ralink SoC common stuff
-+#
-+core-$(CONFIG_MIPS_RALINK)	+= arch/mips/ralink/common/
-+cflags-$(CONFIG_MIPS_RALINK)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink
-+
-+#
-+# Ralink RT288x
-+#
-+core-$(CONFIG_RALINK_RT288X)	+= arch/mips/ralink/rt288x/
-+cflags-$(CONFIG_RALINK_RT288X)	+= -I$(srctree)//arch/mips/include/asm/mach-ralink/rt288x
-+load-$(CONFIG_RALINK_RT288X)	+= 0xffffffff88000000
-+
-+#
-+# Ralink RT305x
-+#
-+core-$(CONFIG_RALINK_RT305X)	+= arch/mips/ralink/rt305x/
-+cflags-$(CONFIG_RALINK_RT305X)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
-+load-$(CONFIG_RALINK_RT305X)	+= 0xffffffff80000000
-+
- cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
- cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
- cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -48,6 +48,9 @@ config AR7
- 	  Support for the Texas Instruments AR7 System-on-a-Chip
- 	  family: TNETD7100, 7200 and 7300.
- 
-+config MIPS_RALINK
-+	bool "Ralink MIPS SoC based boards"
-+
- config BCM47XX
- 	bool "Broadcom BCM47XX based boards"
- 	select CEVT_R4K
-@@ -688,6 +691,7 @@ source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/lasat/Kconfig"
- source "arch/mips/pmc-sierra/Kconfig"
-+source "arch/mips/ralink/Kconfig"
- source "arch/mips/powertv/Kconfig"
- source "arch/mips/sgi-ip27/Kconfig"
- source "arch/mips/sibyte/Kconfig"
-@@ -1044,7 +1048,7 @@ config BOOT_ELF32
- 
- config MIPS_L1_CACHE_SHIFT
- 	int
--	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
-+	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
- 	default "6" if MIPS_CPU_SCACHE
- 	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
- 	default "5"
diff --git a/target/linux/ramips/patches-2.6.34/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-2.6.34/101-rt288x_serial_driver_hack.patch
deleted file mode 100644
index 9cf0ebfacd..0000000000
--- a/target/linux/ramips/patches-2.6.34/101-rt288x_serial_driver_hack.patch
+++ /dev/null
@@ -1,118 +0,0 @@
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -302,9 +302,9 @@ static const struct serial8250_config ua
- 	},
- };
- 
--#if defined (CONFIG_SERIAL_8250_AU1X00)
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
- 
--/* Au1x00 UART hardware has a weird register layout */
-+/* Au1x00 and RT288x UART hardware has a weird register layout */
- static const u8 au_io_in_map[] = {
- 	[UART_RX]  = 0,
- 	[UART_IER] = 2,
-@@ -422,7 +422,7 @@ static unsigned int mem32_serial_in(stru
- 	return readl(p->membase + offset);
- }
- 
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined(CONFIG_SERIAL_8250_AU1X00) || defined(CONFIG_SERIAL_8250_RT288X)
- static unsigned int au_serial_in(struct uart_port *p, int offset)
- {
- 	offset = map_8250_in_reg(p, offset) << p->regshift;
-@@ -503,7 +503,7 @@ static void set_io_from_upio(struct uart
- 		p->serial_out = mem32_serial_out;
- 		break;
- 
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
- 	case UPIO_AU:
- 		p->serial_in = au_serial_in;
- 		p->serial_out = au_serial_out;
-@@ -535,7 +535,7 @@ serial_out_sync(struct uart_8250_port *u
- 	switch (p->iotype) {
- 	case UPIO_MEM:
- 	case UPIO_MEM32:
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
- 	case UPIO_AU:
- #endif
- 	case UPIO_DWAPB:
-@@ -573,8 +573,8 @@ static inline void _serial_dl_write(stru
- 	serial_outp(up, UART_DLM, value >> 8 & 0xff);
- }
- 
--#if defined(CONFIG_SERIAL_8250_AU1X00)
--/* Au1x00 haven't got a standard divisor latch */
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
-+/* Au1x00 and RT288x haven't got a standard divisor latch */
- static int serial_dl_read(struct uart_8250_port *up)
- {
- 	if (up->port.iotype == UPIO_AU)
-@@ -781,22 +781,19 @@ static int size_fifo(struct uart_8250_po
-  */
- static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
- {
--	unsigned char old_dll, old_dlm, old_lcr;
-+	unsigned char old_lcr;
-+	unsigned int old_dl;
- 	unsigned int id;
- 
- 	old_lcr = serial_inp(p, UART_LCR);
- 	serial_outp(p, UART_LCR, UART_LCR_DLAB);
- 
--	old_dll = serial_inp(p, UART_DLL);
--	old_dlm = serial_inp(p, UART_DLM);
-+	old_dl = serial_dl_read(p);
- 
--	serial_outp(p, UART_DLL, 0);
--	serial_outp(p, UART_DLM, 0);
-+	serial_dl_write(p, 0);
-+	id = serial_dl_read(p);
- 
--	id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
--
--	serial_outp(p, UART_DLL, old_dll);
--	serial_outp(p, UART_DLM, old_dlm);
-+	serial_dl_write(p, old_dl);
- 	serial_outp(p, UART_LCR, old_lcr);
- 
- 	return id;
-@@ -2596,7 +2593,7 @@ static void serial8250_config_port(struc
- 	if (flags & UART_CONFIG_TYPE)
- 		autoconfig(up, probeflags);
- 
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
- 	/* if access method is AU, it is a 16550 with a quirk */
- 	if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
- 		up->bugs |= UART_BUG_NOMSR;
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -266,6 +266,14 @@ config SERIAL_8250_AU1X00
- 	  say Y to this option. The driver can handle up to 4 serial ports,
- 	  depending on the SOC. If unsure, say N.
- 
-+config SERIAL_8250_RT288X
-+	bool "Ralink RT288x/RT305x serial port support"
-+	depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
-+	help
-+	  If you have a Ralink RT288x/RT305x SoC based board and want to use the 
-+	  serial port, say Y to this option. The driver can handle up to 2 serial 
-+	  ports. If unsure, say N.
-+
- config SERIAL_8250_RM9K
- 	bool "Support for MIPS RM9xxx integrated serial port"
- 	depends on SERIAL_8250 != n && SERIAL_RM9000
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -284,7 +284,7 @@ struct uart_port {
- #define UPIO_HUB6		(1)
- #define UPIO_MEM		(2)
- #define UPIO_MEM32		(3)
--#define UPIO_AU			(4)			/* Au1x00 type IO */
-+#define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
- #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
- #define UPIO_DWAPB		(6)			/* DesignWare APB UART */
- #define UPIO_RM9000		(7)			/* RM9000 type IO */
diff --git a/target/linux/ramips/patches-2.6.34/102-rt288x-pci-driver-hook.patch b/target/linux/ramips/patches-2.6.34/102-rt288x-pci-driver-hook.patch
deleted file mode 100644
index d2056c6465..0000000000
--- a/target/linux/ramips/patches-2.6.34/102-rt288x-pci-driver-hook.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capc
- obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= pci-octeon.o pcie-octeon.o
-+obj-$(CONFIG_SOC_RT288X)	+= pci-rt288x.o
- 
- ifdef CONFIG_PCI_MSI
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
diff --git a/target/linux/ramips/patches-2.6.34/103-ethernet.patch b/target/linux/ramips/patches-2.6.34/103-ethernet.patch
deleted file mode 100644
index 404f885950..0000000000
--- a/target/linux/ramips/patches-2.6.34/103-ethernet.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -614,6 +614,12 @@ config MIPS_AU1X00_ENET
- 	  If you have an Alchemy Semi AU1X00 based system
- 	  say Y.  Otherwise, say N.
- 
-+config MIPS_RAMIPS_NET
-+	tristate "Ethernet driver for rt288x/rt305x"
-+	depends on MIPS_RALINK
-+	help
-+	  This driver supports the etehrnet mac inside the ralink wisocs
-+
- config SGI_IOC3_ETH
- 	bool "SGI IOC3 Ethernet"
- 	depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -222,6 +222,7 @@ obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
- obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
- obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
-+obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o
- obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
- obj-$(CONFIG_DECLANCE) += declance.o
- obj-$(CONFIG_ATARILANCE) += atarilance.o
diff --git a/target/linux/ramips/rt288x/config-2.6.32 b/target/linux/ramips/rt288x/config-2.6.32
deleted file mode 100644
index 9353b3743b..0000000000
--- a/target/linux/ramips/rt288x/config-2.6.32
+++ /dev/null
@@ -1,160 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2E is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MII is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_MIPS_RALINK=y
-CONFIG_MIPS_RAMIPS_NET=y
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-CONFIG_RALINK_RT288X=y
-# CONFIG_RALINK_RT305X is not set
-CONFIG_RT288X_MACH_RT_N15=y
-CONFIG_RT288X_MACH_WZR_AGL300NH=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT288X=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_TREE_RCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt288x/config-2.6.34 b/target/linux/ramips/rt288x/config-2.6.34
deleted file mode 100644
index 1985d0e991..0000000000
--- a/target/linux/ramips/rt288x/config-2.6.34
+++ /dev/null
@@ -1,171 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MII is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_MIPS_RALINK=y
-CONFIG_MIPS_RAMIPS_NET=y
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-CONFIG_RALINK_RT288X=y
-# CONFIG_RALINK_RT305X is not set
-CONFIG_RT288X_MACH_RT_N15=y
-CONFIG_RT288X_MACH_WZR_AGL300NH=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT288X=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-# CONFIG_TINY_RCU is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_TREE_RCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt305x/config-2.6.32 b/target/linux/ramips/rt305x/config-2.6.32
deleted file mode 100644
index 05388b296d..0000000000
--- a/target/linux/ramips/rt305x/config-2.6.32
+++ /dev/null
@@ -1,156 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2E is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_RANDOM=m
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MII is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_MIPS_RALINK=y
-CONFIG_MIPS_RAMIPS_NET=y
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-# CONFIG_RALINK_RT288X is not set
-CONFIG_RALINK_RT305X=y
-CONFIG_RT305X_MACH_DIR_300_REVB=y
-CONFIG_RT305X_MACH_F5D8235_V2=y
-CONFIG_RT305X_MACH_FONERA20N=y
-CONFIG_RT305X_MACH_V22RW_2X2=y
-CONFIG_RT305X_MACH_PWH2004=y
-CONFIG_RT305X_MACH_WCR150GN=y
-CONFIG_RT305X_MACH_WHR_G300N=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT305X=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_TREE_RCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt305x/config-2.6.34 b/target/linux/ramips/rt305x/config-2.6.34
deleted file mode 100644
index b677856b6b..0000000000
--- a/target/linux/ramips/rt305x/config-2.6.34
+++ /dev/null
@@ -1,167 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_RANDOM=m
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MII is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_MIPS_RALINK=y
-CONFIG_MIPS_RAMIPS_NET=y
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-# CONFIG_RALINK_RT288X is not set
-CONFIG_RALINK_RT305X=y
-CONFIG_RT305X_MACH_DIR_300_REVB=y
-CONFIG_RT305X_MACH_F5D8235_V2=y
-CONFIG_RT305X_MACH_FONERA20N=y
-CONFIG_RT305X_MACH_V22RW_2X2=y
-CONFIG_RT305X_MACH_PWH2004=y
-CONFIG_RT305X_MACH_WCR150GN=y
-CONFIG_RT305X_MACH_WHR_G300N=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT305X=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TINY_RCU is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_TREE_RCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0