diff options
| author | Sander Vanheule <sander@svanheule.net> | 2021-02-20 14:45:26 +0100 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2021-02-24 20:23:59 +0100 |
| commit | c53a86806d33a16fe8101719f44e13a53630d887 (patch) | |
| tree | c033c8234b1c16d559bab9da6c21a3691649a926 /target/linux/ramips | |
| parent | 0a19f77f32caef2f3360ae2b4fe46280e826fd96 (diff) | |
| download | upstream-c53a86806d33a16fe8101719f44e13a53630d887.tar.gz upstream-c53a86806d33a16fe8101719f44e13a53630d887.tar.bz2 upstream-c53a86806d33a16fe8101719f44e13a53630d887.zip | |
ramips: mt7621: enable SX150x driver
The Netgear R6800 and R6700v2 devices have a Semtech SX1503 GPIO
expander controlling the device LEDs. This expander was initially
supported on 4.14, but support was lost in the transition to 5.4.
Since this driver cannot be built as a kernel module, enable it in the
kernel config for all mt7621 devices.
Run-tested on a Netgear R6800.
Cc: Stijn Segers <foss@volatilesystems.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Stijn Segers <foss@volatilesystems.org>
(cherry picked from commit 773949c152f7378a303919e790210113012fea04)
Diffstat (limited to 'target/linux/ramips')
| -rw-r--r-- | target/linux/ramips/mt7621/config-5.4 | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/config-5.4 b/target/linux/ramips/mt7621/config-5.4 index fba22a39cf..057c782760 100644 --- a/target/linux/ramips/mt7621/config-5.4 +++ b/target/linux/ramips/mt7621/config-5.4 @@ -210,6 +210,7 @@ CONFIG_PHYLINK=y CONFIG_PINCTRL=y CONFIG_PINCTRL_RT2880=y # CONFIG_PINCTRL_SINGLE is not set +CONFIG_PINCTRL_SX150X=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_SUPPLY=y |