kernel/4.3: update to version 4.3.3

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de

SVN-Revision: 48224

5 files changed, 20 insertions, 31 deletions

diff --git a/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch b/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch
index 3bb7e2f2e4..d788f2f076 100644
--- a/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch
+++ b/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch
@@ -9,9 +9,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  1 file changed, 197 insertions(+)
  create mode 100644 arch/mips/configs/mt7621_defconfig
 
-diff --git a/arch/mips/configs/mt7621_defconfig b/arch/mips/configs/mt7621_defconfig
-new file mode 100644
-index 0000000..7719471
 --- /dev/null
 +++ b/arch/mips/configs/mt7621_defconfig
 @@ -0,0 +1,197 @@
@@ -212,6 +209,3 @@ index 0000000..7719471
 +CONFIG_CRC32_SARWATE=y
 +# CONFIG_XZ_DEC_X86 is not set
 +CONFIG_AVERAGE=y
--- 
-1.7.10.4
-
diff --git a/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch b/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch
index e2b2ba5e00..a21f5c6180 100644
--- a/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch
+++ b/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch
@@ -11,8 +11,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  arch/mips/ralink/early_printk.c |   25 +++++++++++++++++++++++++
  1 file changed, 25 insertions(+)
 
-diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
-index 255d695..c04ee53 100644
 --- a/arch/mips/ralink/early_printk.c
 +++ b/arch/mips/ralink/early_printk.c
 @@ -25,11 +25,13 @@
@@ -61,6 +59,3 @@ index 255d695..c04ee53 100644
  	if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
  		uart_w32(ch, UART_TX);
  		while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
--- 
-1.7.10.4
-
diff --git a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
index f511b8838e..cc61c29ca5 100644
--- a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
+++ b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
@@ -38,7 +38,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +};
 --- a/drivers/phy/Kconfig
 +++ b/drivers/phy/Kconfig
-@@ -331,6 +331,14 @@
+@@ -331,6 +331,14 @@ config PHY_XGENE
  	help
  	  This option enables support for APM X-Gene SoC multi-purpose PHY.
  
@@ -55,7 +55,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	depends on RESET_CONTROLLER
 --- a/drivers/phy/Makefile
 +++ b/drivers/phy/Makefile
-@@ -46,3 +46,4 @@
+@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-
  obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
  obj-$(CONFIG_PHY_BRCMSTB_SATA)		+= phy-brcmstb-sata.o
  obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
diff --git a/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch b/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch
index 07c2eac015..db29293584 100644
--- a/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch
+++ b/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch
@@ -5391,7 +5391,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  /* TODO: copied from ehci-hcd.c - can this be refactored? */
  /*
   * xhci_handshake - spin reading hc until handshake completes or fails
-@@ -198,7 +220,7 @@ int xhci_reset(struct xhci_hcd *xhci)
+@@ -208,7 +230,7 @@ int xhci_reset(struct xhci_hcd *xhci)
  	return ret;
  }
  
@@ -5400,7 +5400,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  static int xhci_free_msi(struct xhci_hcd *xhci)
  {
  	int i;
-@@ -448,6 +470,11 @@ static void compliance_mode_recovery(uns
+@@ -458,6 +480,11 @@ static void compliance_mode_recovery(uns
  					"Attempting compliance mode recovery");
  			hcd = xhci->shared_hcd;
  
@@ -5412,7 +5412,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  			if (hcd->state == HC_STATE_SUSPENDED)
  				usb_hcd_resume_root_hub(hcd);
  
-@@ -495,6 +522,9 @@ static bool xhci_compliance_mode_recover
+@@ -505,6 +532,9 @@ static bool xhci_compliance_mode_recover
  {
  	const char *dmi_product_name, *dmi_sys_vendor;
  
@@ -5422,7 +5422,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
  	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
  	if (!dmi_product_name || !dmi_sys_vendor)
-@@ -540,6 +570,10 @@ int xhci_init(struct usb_hcd *hcd)
+@@ -550,6 +580,10 @@ int xhci_init(struct usb_hcd *hcd)
  		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
  				"xHCI doesn't need link TRB QUIRK");
  	}
@@ -5433,7 +5433,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	retval = xhci_mem_init(xhci, GFP_KERNEL);
  	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
  
-@@ -624,7 +658,11 @@ int xhci_run(struct usb_hcd *hcd)
+@@ -634,7 +668,11 @@ int xhci_run(struct usb_hcd *hcd)
  			"// Set the interrupt modulation register");
  	temp = readl(&xhci->ir_set->irq_control);
  	temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -5445,7 +5445,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	writel(temp, &xhci->ir_set->irq_control);
  
  	/* Set the HCD state before we enable the irqs */
-@@ -649,6 +687,9 @@ int xhci_run(struct usb_hcd *hcd)
+@@ -659,6 +697,9 @@ int xhci_run(struct usb_hcd *hcd)
  		xhci_queue_vendor_command(xhci, command, 0, 0, 0,
  				TRB_TYPE(TRB_NEC_GET_FW));
  	}
@@ -5455,7 +5455,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
  			"Finished xhci_run for USB2 roothub");
  	return 0;
-@@ -1639,6 +1680,14 @@ int xhci_drop_endpoint(struct usb_hcd *h
+@@ -1649,6 +1690,14 @@ int xhci_drop_endpoint(struct usb_hcd *h
  	u32 drop_flag;
  	u32 new_add_flags, new_drop_flags;
  	int ret;
@@ -5470,7 +5470,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
  	if (ret <= 0)
-@@ -1688,6 +1737,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
+@@ -1698,6 +1747,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
  
  	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
  
@@ -5511,7 +5511,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
  			(unsigned int) ep->desc.bEndpointAddress,
  			udev->slot_id,
-@@ -1720,6 +1803,19 @@ int xhci_add_endpoint(struct usb_hcd *hc
+@@ -1730,6 +1813,19 @@ int xhci_add_endpoint(struct usb_hcd *hc
  	u32 new_add_flags, new_drop_flags;
  	struct xhci_virt_device *virt_dev;
  	int ret = 0;
@@ -5531,7 +5531,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
  	if (ret <= 0) {
-@@ -1783,6 +1879,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
+@@ -1793,6 +1889,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
  		return -ENOMEM;
  	}
  
@@ -5588,7 +5588,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
  	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
  
-@@ -4446,8 +4592,14 @@ static u16 xhci_call_host_update_timeout
+@@ -4456,8 +4602,14 @@ static u16 xhci_call_host_update_timeout
  		u16 *timeout)
  {
  	if (state == USB3_LPM_U1)
@@ -5603,7 +5603,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  		return xhci_calculate_u2_timeout(xhci, udev, desc);
  
  	return USB3_LPM_DISABLED;
-@@ -4839,7 +4991,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4849,7 +5001,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  	hcd->self.no_sg_constraint = 1;
  
  	/* XHCI controllers don't stop the ep queue on short packets :| */
@@ -5613,7 +5613,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	if (usb_hcd_is_primary_hcd(hcd)) {
  		xhci = hcd_to_xhci(hcd);
-@@ -4900,6 +5054,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4910,6 +5064,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  		return retval;
  	xhci_dbg(xhci, "Reset complete\n");
  
@@ -5624,7 +5624,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	/* Set dma_mask and coherent_dma_mask to 64-bits,
  	 * if xHC supports 64-bit addressing */
  	if (HCC_64BIT_ADDR(xhci->hcc_params) &&
-@@ -5005,8 +5163,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+@@ -5015,8 +5173,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
  MODULE_AUTHOR(DRIVER_AUTHOR);
  MODULE_LICENSE("GPL");
  
diff --git a/target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch b/target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch
index 37b149c069..99a8f932e3 100644
--- a/target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch
+++ b/target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ralink/mt7620.c
 +++ b/arch/mips/ralink/mt7620.c
-@@ -104,31 +104,31 @@
+@@ -104,31 +104,31 @@ static struct rt2880_pmx_group mt7620a_p
  };
  
  static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
@@ -37,7 +37,7 @@
  };
  
  static struct rt2880_pmx_func i2c_grp_mt7628[] = {
-@@ -140,21 +140,21 @@
+@@ -140,21 +140,21 @@ static struct rt2880_pmx_func i2c_grp_mt
  
  static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
  static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
@@ -62,7 +62,7 @@
  };
  
  static struct rt2880_pmx_func i2s_grp_mt7628[] = {
-@@ -449,6 +449,8 @@
+@@ -449,6 +449,8 @@ void __init ralink_clk_init(void)
  	ralink_clk_add("10000b00.spi", sys_rate);
  	ralink_clk_add("10000b40.spi", sys_rate);
  	ralink_clk_add("10000c00.uartlite", periph_rate);
@@ -71,7 +71,7 @@
  	ralink_clk_add("10180000.wmac", xtal_rate);
  
  	if (IS_ENABLED(CONFIG_USB) &&
-@@ -571,13 +573,13 @@
+@@ -571,13 +573,13 @@ void prom_soc_init(struct ralink_soc_inf
  
  	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);