diff options
| author | Gabor Juhos <juhosg@openwrt.org> | 2012-05-29 16:39:03 +0000 |
|---|---|---|
| committer | Gabor Juhos <juhosg@openwrt.org> | 2012-05-29 16:39:03 +0000 |
| commit | c71838faa1dc9ade9918abbc61b587ff35880a53 (patch) | |
| tree | 207ef158ec957e77d33908400b3e29f2be273402 /target/linux/ramips | |
| parent | c444edc6fdd096cfa8335effd6f57b292c265793 (diff) | |
| download | upstream-c71838faa1dc9ade9918abbc61b587ff35880a53.tar.gz upstream-c71838faa1dc9ade9918abbc61b587ff35880a53.tar.bz2 upstream-c71838faa1dc9ade9918abbc61b587ff35880a53.zip | |
ramips: WAN LED for D-Link DIR-300-B1
Add led devices for D-Link DIR-300-B1 WAN LED.
Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.
Closes: https://dev.openwrt.org/ticket/11326
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
on the WAN interface]
SVN-Revision: 31989
Diffstat (limited to 'target/linux/ramips')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/uci-defaults/leds | 24 | ||||
| -rw-r--r-- | target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c | 14 |
2 files changed, 38 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds index ba6ea60cde..f87a64faef 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/leds @@ -30,6 +30,24 @@ commit system EOF } +set_wan_led() { + local sysfs="$1" + local name="$2" + local trigger="$3" + local dev="$4" + local mode="$5" + + uci batch <<EOF +set system.${name}_led=led +set system.${name}_led.name='$name' +set system.${name}_led.sysfs='$sysfs' +set system.${name}_led.trigger='$trigger' +set system.${name}_led.dev='$dev' +set system.${name}_led.mode='$mode' +commit system +EOF +} + board=$(ramips_board_name) case $board in @@ -39,6 +57,12 @@ case $board in bc2) set_usb_led "bc2:blue:usb" ;; + dir-300-b1|\ + dir-600-b1|\ + dir-600-b2) + # ANDed with vlan switch port 4 led state + set_wan_led "d-link:amber:wan" wan_switch default-on + ;; esr-9753) set_wifi_led "rt2800pci-phy0::radio" ;; diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c index 3581972860..e4c5c73da1 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c @@ -22,6 +22,12 @@ #define DIR_300B_GPIO_LED_STATUS_AMBER 8 #define DIR_300B_GPIO_LED_STATUS_GREEN 9 #define DIR_300B_GPIO_LED_WPS 13 +/* + * NOTE: The wan led is also connected to the switch, both + * switch and gpio must be active to make it light up + */ +#define DIR_300B_GPIO_LED_WAN_GREEN 12 +#define DIR_300B_GPIO_LED_WAN_AMBER 14 #define DIR_300B_GPIO_BUTTON_WPS 0 /* active low */ #define DIR_300B_GPIO_BUTTON_RESET 10 /* active low */ @@ -39,6 +45,14 @@ static struct gpio_led dir_300b_leds_gpio[] __initdata = { .gpio = DIR_300B_GPIO_LED_STATUS_GREEN, .active_low = 1, }, { + .name = "d-link:amber:wan", + .gpio = DIR_300B_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:wan", + .gpio = DIR_300B_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { .name = "d-link:blue:wps", .gpio = DIR_300B_GPIO_LED_WPS, .active_low = 1, |