kernel: update 3.18 to 3.18.14

Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711

17 files changed, 89 insertions, 95 deletions

diff --git a/target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch b/target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch
index 0eebadb849..771de12f17 100644
--- a/target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch
+++ b/target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch
@@ -78,7 +78,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#endif
 --- a/arch/mips/kernel/vmlinux.lds.S
 +++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -51,6 +51,7 @@
+@@ -51,6 +51,7 @@ SECTIONS
  	/* read-only */
  	_text = .;	/* Text and read-only data */
  	.text : {
@@ -88,9 +88,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  		LOCK_TEXT
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
-@@ -7,6 +7,11 @@
- 	select CLKSRC_OF
- 	select CLKSRC_MMIO
+@@ -12,6 +12,11 @@ config RALINK_ILL_ACC
+ 	depends on SOC_RT305X
+ 	default y
  
 +config IRQ_INTC
 +	bool
@@ -100,7 +100,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  choice
  	prompt "Ralink SoC selection"
  	default SOC_RT305X
-@@ -28,6 +33,15 @@
+@@ -33,6 +38,15 @@ choice
  	config SOC_MT7620
  		bool "MT7620"
  
@@ -116,7 +116,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  endchoice
  
  choice
-@@ -59,6 +73,10 @@
+@@ -64,6 +78,10 @@ choice
  		depends on SOC_MT7620
  		select BUILTIN_DTB
  
@@ -154,7 +154,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
 --- a/arch/mips/ralink/Platform
 +++ b/arch/mips/ralink/Platform
-@@ -27,3 +27,8 @@
+@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883)	+= -I$(srctr
  #
  load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
  cflags-$(CONFIG_SOC_MT7620)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
@@ -715,7 +715,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +}
 --- a/arch/mips/kernel/mips-cm.c
 +++ b/arch/mips/kernel/mips-cm.c
-@@ -105,7 +105,7 @@
+@@ -105,7 +105,7 @@ int mips_cm_probe(void)
  	write_gcr_base(base_reg);
  
  	/* disable CM regions */
@@ -724,7 +724,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
  	write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
  	write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
-@@ -113,7 +113,7 @@
+@@ -113,7 +113,7 @@ int mips_cm_probe(void)
  	write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
  	write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
  	write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
diff --git a/target/linux/ramips/patches-3.18/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-3.18/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
index 955550a422..310d362016 100644
--- a/target/linux/ramips/patches-3.18/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
+++ b/target/linux/ramips/patches-3.18/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
@@ -11,7 +11,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/arch/mips/kernel/cevt-r4k.c
 +++ b/arch/mips/kernel/cevt-r4k.c
-@@ -29,12 +29,6 @@
+@@ -29,12 +29,6 @@ static int mips_next_event(unsigned long
  	return res;
  }
  
@@ -24,7 +24,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
  int cp0_timer_irq_installed;
  
-@@ -75,9 +69,38 @@
+@@ -75,9 +69,38 @@ struct irqaction c0_compare_irqaction =
  	.name = "timer",
  };
  
@@ -63,7 +63,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  }
  
  /*
-@@ -198,12 +221,14 @@
+@@ -198,12 +221,14 @@ int r4k_clockevent_init(void)
  
  	clockevents_register_device(cd);
  
@@ -95,5 +95,5 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	select CLKSRC_MMIO
 +	select CEVT_SYSTICK_QUIRK
  
- config IRQ_INTC
+ config RALINK_ILL_ACC
  	bool
diff --git a/target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch b/target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch
index 043e4a39e2..cdfb4c0f62 100644
--- a/target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch
+++ b/target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch
@@ -46,7 +46,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  #define MT7620_SDRAM_SIZE_MAX		64
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
-@@ -31,7 +31,7 @@ choice
+@@ -41,7 +41,7 @@ choice
  		select HW_HAS_PCI
  
  	config SOC_MT7620
diff --git a/target/linux/ramips/patches-3.18/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch b/target/linux/ramips/patches-3.18/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch
index 82473d2f53..ab60f2d549 100644
--- a/target/linux/ramips/patches-3.18/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch
+++ b/target/linux/ramips/patches-3.18/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch
@@ -11,7 +11,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/tty/serial/8250/8250_core.c
 +++ b/drivers/tty/serial/8250/8250_core.c
-@@ -2635,7 +2635,7 @@ serial8250_pm(struct uart_port *port, un
+@@ -2634,7 +2634,7 @@ serial8250_pm(struct uart_port *port, un
  static unsigned int serial8250_port_size(struct uart_8250_port *pt)
  {
  	if (pt->port.iotype == UPIO_AU)
diff --git a/target/linux/ramips/patches-3.18/0030-GPIO-add-named-gpio-exports.patch b/target/linux/ramips/patches-3.18/0030-GPIO-add-named-gpio-exports.patch
index 534d8c18fc..307a99ab60 100644
--- a/target/linux/ramips/patches-3.18/0030-GPIO-add-named-gpio-exports.patch
+++ b/target/linux/ramips/patches-3.18/0030-GPIO-add-named-gpio-exports.patch
@@ -22,7 +22,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  #include "gpiolib.h"
  
-@@ -315,3 +317,69 @@ void of_gpiochip_remove(struct gpio_chip
+@@ -316,3 +318,69 @@ void of_gpiochip_remove(struct gpio_chip
  	gpiochip_remove_pin_ranges(chip);
  	of_node_put(chip->of_node);
  }
diff --git a/target/linux/ramips/patches-3.18/0031-PCI-MIPS-adds-rt2880-pci-support.patch b/target/linux/ramips/patches-3.18/0031-PCI-MIPS-adds-rt2880-pci-support.patch
index d3f16f4fac..193f1c28b4 100644
--- a/target/linux/ramips/patches-3.18/0031-PCI-MIPS-adds-rt2880-pci-support.patch
+++ b/target/linux/ramips/patches-3.18/0031-PCI-MIPS-adds-rt2880-pci-support.patch
@@ -309,7 +309,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +arch_initcall(pcibios_init);
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
-@@ -21,6 +21,7 @@ choice
+@@ -31,6 +31,7 @@ choice
  	config SOC_RT288X
  		bool "RT288x"
  		select MIPS_L1_CACHE_SHIFT_4
diff --git a/target/linux/ramips/patches-3.18/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-3.18/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch
index 03f8a92c8d..c20a5df55e 100644
--- a/target/linux/ramips/patches-3.18/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch
+++ b/target/linux/ramips/patches-3.18/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch
@@ -422,7 +422,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +arch_initcall(mt7620_pci_init);
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
-@@ -33,6 +33,7 @@ choice
+@@ -43,6 +43,7 @@ choice
  
  	config SOC_MT7620
  		bool "MT7620/8"
diff --git a/target/linux/ramips/patches-3.18/0033-NET-multi-phy-support.patch b/target/linux/ramips/patches-3.18/0033-NET-multi-phy-support.patch
index 2cd8633288..f6d2456bad 100644
--- a/target/linux/ramips/patches-3.18/0033-NET-multi-phy-support.patch
+++ b/target/linux/ramips/patches-3.18/0033-NET-multi-phy-support.patch
@@ -11,7 +11,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/net/phy/phy.c
 +++ b/drivers/net/phy/phy.c
-@@ -819,7 +819,8 @@ void phy_state_machine(struct work_struc
+@@ -838,7 +838,8 @@ void phy_state_machine(struct work_struc
  		/* If the link is down, give up on negotiation for now */
  		if (!phydev->link) {
  			phydev->state = PHY_NOLINK;
@@ -21,7 +21,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  			phydev->adjust_link(phydev->attached_dev);
  			break;
  		}
-@@ -892,7 +893,8 @@ void phy_state_machine(struct work_struc
+@@ -911,7 +912,8 @@ void phy_state_machine(struct work_struc
  			netif_carrier_on(phydev->attached_dev);
  		} else {
  			phydev->state = PHY_NOLINK;
@@ -31,7 +31,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  		}
  
  		phydev->adjust_link(phydev->attached_dev);
-@@ -904,7 +906,8 @@ void phy_state_machine(struct work_struc
+@@ -923,7 +925,8 @@ void phy_state_machine(struct work_struc
  	case PHY_HALTED:
  		if (phydev->link) {
  			phydev->link = 0;
diff --git a/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch b/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch
index a27002a769..1dd866103a 100644
--- a/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch
+++ b/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch
@@ -1,6 +1,6 @@
 --- a/drivers/phy/Kconfig
 +++ b/drivers/phy/Kconfig
-@@ -239,6 +239,11 @@
+@@ -239,6 +239,11 @@ config PHY_XGENE
  	help
  	  This option enables support for APM X-Gene SoC multi-purpose PHY.
  
@@ -14,7 +14,7 @@
  	depends on RESET_CONTROLLER
 --- a/drivers/phy/Makefile
 +++ b/drivers/phy/Makefile
-@@ -31,3 +31,4 @@
+@@ -31,3 +31,4 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+=
  obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
  obj-$(CONFIG_PHY_STIH407_USB)		+= phy-stih407-usb.o
  obj-$(CONFIG_PHY_STIH41X_USB)		+= phy-stih41x-usb.o
diff --git a/target/linux/ramips/patches-3.18/0038-USB-add-OHCI-EHCI-OF-binding.patch b/target/linux/ramips/patches-3.18/0038-USB-add-OHCI-EHCI-OF-binding.patch
index 3012c1c9b5..a5fb5aba44 100644
--- a/target/linux/ramips/patches-3.18/0038-USB-add-OHCI-EHCI-OF-binding.patch
+++ b/target/linux/ramips/patches-3.18/0038-USB-add-OHCI-EHCI-OF-binding.patch
@@ -14,7 +14,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/usb/host/ehci-platform.c
 +++ b/drivers/usb/host/ehci-platform.c
-@@ -359,6 +373,7 @@ static int ehci_platform_resume(struct d
+@@ -359,6 +359,7 @@ static int ehci_platform_resume(struct d
  static const struct of_device_id vt8500_ehci_ids[] = {
  	{ .compatible = "via,vt8500-ehci", },
  	{ .compatible = "wm,prizm-ehci", },
@@ -24,7 +24,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  };
 --- a/drivers/usb/host/ohci-platform.c
 +++ b/drivers/usb/host/ohci-platform.c
-@@ -342,6 +358,7 @@ static int ohci_platform_resume(struct d
+@@ -342,6 +342,7 @@ static int ohci_platform_resume(struct d
  #endif /* CONFIG_PM */
  
  static const struct of_device_id ohci_platform_ids[] = {
diff --git a/target/linux/ramips/patches-3.18/0044-mtd-add-chunked-read-io-to-m25p80.patch b/target/linux/ramips/patches-3.18/0044-mtd-add-chunked-read-io-to-m25p80.patch
index b014c3e847..2bffa1f696 100644
--- a/target/linux/ramips/patches-3.18/0044-mtd-add-chunked-read-io-to-m25p80.patch
+++ b/target/linux/ramips/patches-3.18/0044-mtd-add-chunked-read-io-to-m25p80.patch
@@ -8,7 +8,7 @@
  
  #include <linux/mtd/mtd.h>
  #include <linux/mtd/partitions.h>
-@@ -32,6 +33,7 @@
+@@ -32,6 +33,7 @@ struct m25p {
  	struct spi_device	*spi;
  	struct spi_nor		spi_nor;
  	struct mtd_info		mtd;
@@ -16,7 +16,7 @@
  	u8			command[MAX_CMD_SIZE];
  };
  
-@@ -157,6 +159,58 @@
+@@ -157,6 +159,58 @@ static int m25p80_read(struct spi_nor *n
  	return 0;
  }
  
@@ -75,7 +75,7 @@
  static int m25p80_erase(struct spi_nor *nor, loff_t offset)
  {
  	struct m25p *flash = nor->priv;
-@@ -197,6 +251,7 @@
+@@ -197,6 +251,7 @@ static int m25p_probe(struct spi_device
  	struct spi_nor *nor;
  	enum read_mode mode = SPI_NOR_NORMAL;
  	char *flash_name = NULL;
@@ -83,7 +83,7 @@
  	int ret;
  
  	data = dev_get_platdata(&spi->dev);
-@@ -244,6 +299,14 @@
+@@ -244,6 +299,14 @@ static int m25p_probe(struct spi_device
  	if (ret)
  		return ret;
  
diff --git a/target/linux/ramips/patches-3.18/0060-soc_type.patch b/target/linux/ramips/patches-3.18/0060-soc_type.patch
index 23ce6cf121..60d301405b 100644
--- a/target/linux/ramips/patches-3.18/0060-soc_type.patch
+++ b/target/linux/ramips/patches-3.18/0060-soc_type.patch
@@ -219,7 +219,7 @@
  {
 --- a/arch/mips/ralink/mt7621.c
 +++ b/arch/mips/ralink/mt7621.c
-@@ -175,6 +175,7 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -176,6 +176,7 @@ void prom_soc_init(struct ralink_soc_inf
  	soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
  	soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
  	soc_info->mem_base = MT7621_DRAM_BASE;
diff --git a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
index f13691ad1b..fb9b9f3e88 100644
--- a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
+++ b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
@@ -1,6 +1,6 @@
 --- a/drivers/usb/core/hcd-pci.c
 +++ b/drivers/usb/core/hcd-pci.c
-@@ -214,8 +214,13 @@
+@@ -214,8 +214,13 @@ int usb_hcd_pci_probe(struct pci_dev *de
  		goto disable_pci;
  	}
  
@@ -16,7 +16,7 @@
  		/* EHCI, OHCI */
 --- a/drivers/usb/core/hub.c
 +++ b/drivers/usb/core/hub.c
-@@ -1286,7 +1286,7 @@
+@@ -1286,7 +1286,7 @@ static void hub_quiesce(struct usb_hub *
  	if (type != HUB_SUSPEND) {
  		/* Disconnect all the children */
  		for (i = 0; i < hdev->maxchild; ++i) {
@@ -27,7 +27,7 @@
  	}
 --- a/drivers/usb/core/port.c
 +++ b/drivers/usb/core/port.c
-@@ -480,8 +480,10 @@
+@@ -480,8 +480,10 @@ void usb_hub_remove_port_device(struct u
  	struct usb_port *port_dev = hub->ports[port1 - 1];
  	struct usb_port *peer;
  
@@ -44,7 +44,7 @@
  }
 --- a/drivers/usb/host/Kconfig
 +++ b/drivers/usb/host/Kconfig
-@@ -32,7 +32,13 @@
+@@ -32,7 +32,13 @@ config USB_XHCI_PCI
         default y
  
  config USB_XHCI_PLATFORM
@@ -59,7 +59,7 @@
  
  config USB_XHCI_MVEBU
  	tristate "xHCI support for Marvell Armada 375/38x"
-@@ -589,7 +595,7 @@
+@@ -589,7 +595,7 @@ endif # USB_OHCI_HCD
  
  config USB_UHCI_HCD
  	tristate "UHCI HCD (most Intel and VIA) support"
@@ -70,7 +70,7 @@
  	  accessing the USB hardware in the PC (which is also called the USB
 --- a/drivers/usb/host/Makefile
 +++ b/drivers/usb/host/Makefile
-@@ -16,7 +16,12 @@
+@@ -16,7 +16,12 @@ xhci-hcd-y := xhci.o xhci-mem.o
  xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
  xhci-hcd-y += xhci-trace.o
  
@@ -83,7 +83,7 @@
  ifneq ($(CONFIG_USB_XHCI_MVEBU), )
  	xhci-plat-hcd-y		+= xhci-mvebu.o
  endif
-@@ -26,9 +31,14 @@
+@@ -26,9 +31,14 @@ endif
  
  obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
  
@@ -3793,7 +3793,7 @@
  
 --- a/drivers/usb/host/xhci-mem.c
 +++ b/drivers/usb/host/xhci-mem.c
-@@ -67,6 +67,9 @@
+@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment
  
  static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
  {
@@ -3803,7 +3803,7 @@
  	if (seg->trbs) {
  		dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
  		seg->trbs = NULL;
-@@ -1475,9 +1478,17 @@
+@@ -1475,9 +1478,17 @@ int xhci_endpoint_init(struct xhci_hcd *
  			max_burst = (usb_endpoint_maxp(&ep->desc)
  				     & 0x1800) >> 11;
  		}
@@ -5039,7 +5039,7 @@
 +#endif
 --- a/drivers/usb/host/xhci-plat.c
 +++ b/drivers/usb/host/xhci-plat.c
-@@ -33,6 +33,13 @@
+@@ -33,6 +33,13 @@ static void xhci_plat_quirks(struct devi
  	 * dev struct in order to setup MSI
  	 */
  	xhci->quirks |= XHCI_PLAT;
@@ -5053,7 +5053,7 @@
  }
  
  /* called during probe() after chip reset completes */
-@@ -79,7 +86,11 @@
+@@ -79,7 +86,11 @@ static int xhci_plat_probe(struct platfo
  
  	driver = &xhci_plat_hc_driver;
  
@@ -5067,7 +5067,7 @@
  
 --- a/drivers/usb/host/xhci-ring.c
 +++ b/drivers/usb/host/xhci-ring.c
-@@ -254,16 +254,20 @@
+@@ -254,16 +254,20 @@ static void inc_enq(struct xhci_hcd *xhc
  static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
  		unsigned int num_trbs)
  {
@@ -5088,7 +5088,7 @@
  
  	return 1;
  }
-@@ -2799,6 +2803,7 @@
+@@ -2805,6 +2809,7 @@ static int prepare_ring(struct xhci_hcd
  		next = ring->enqueue;
  
  		while (last_trb(xhci, ring, ring->enq_seg, next)) {
@@ -5096,7 +5096,7 @@
  			/* If we're not dealing with 0.95 hardware or isoc rings
  			 * on AMD 0.96 host, clear the chain bit.
  			 */
-@@ -2808,6 +2813,9 @@
+@@ -2814,6 +2819,9 @@ static int prepare_ring(struct xhci_hcd
  				next->link.control &= cpu_to_le32(~TRB_CHAIN);
  			else
  				next->link.control |= cpu_to_le32(TRB_CHAIN);
@@ -5106,7 +5106,7 @@
  
  			wmb();
  			next->link.control ^= cpu_to_le32(TRB_CYCLE);
-@@ -2938,6 +2946,9 @@
+@@ -2944,6 +2952,9 @@ static void giveback_first_trb(struct xh
  		start_trb->field[3] |= cpu_to_le32(start_cycle);
  	else
  		start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
@@ -5116,7 +5116,7 @@
  	xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
  }
  
-@@ -2993,6 +3004,29 @@
+@@ -2999,6 +3010,29 @@ static u32 xhci_td_remainder(unsigned in
  		return (remainder >> 10) << 17;
  }
  
@@ -5146,7 +5146,7 @@
  /*
   * For xHCI 1.0 host controllers, TD size is the number of max packet sized
   * packets remaining in the TD (*not* including this TRB).
-@@ -3130,6 +3164,7 @@
+@@ -3136,6 +3170,7 @@ static int queue_bulk_sg_tx(struct xhci_
  		}
  
  		/* Set the TRB length, TD size, and interrupter fields. */
@@ -5154,7 +5154,7 @@
  		if (xhci->hci_version < 0x100) {
  			remainder = xhci_td_remainder(
  					urb->transfer_buffer_length -
-@@ -3139,6 +3174,12 @@
+@@ -3145,6 +3180,12 @@ static int queue_bulk_sg_tx(struct xhci_
  					trb_buff_len, total_packet_count, urb,
  					num_trbs - 1);
  		}
@@ -5167,7 +5167,7 @@
  		length_field = TRB_LEN(trb_buff_len) |
  			remainder |
  			TRB_INTR_TARGET(0);
-@@ -3201,6 +3242,9 @@
+@@ -3207,6 +3248,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
  	int running_total, trb_buff_len, ret;
  	unsigned int total_packet_count;
  	u64 addr;
@@ -5177,7 +5177,7 @@
  
  	if (urb->num_sgs)
  		return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
-@@ -3226,6 +3270,25 @@
+@@ -3232,6 +3276,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
  		running_total += TRB_MAX_BUFF_SIZE;
  	}
  	/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
@@ -5203,7 +5203,7 @@
  
  	ret = prepare_transfer(xhci, xhci->devs[slot_id],
  			ep_index, urb->stream_id,
-@@ -3285,6 +3348,7 @@
+@@ -3291,6 +3354,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
  			field |= TRB_ISP;
  
  		/* Set the TRB length, TD size, and interrupter fields. */
@@ -5211,7 +5211,7 @@
  		if (xhci->hci_version < 0x100) {
  			remainder = xhci_td_remainder(
  					urb->transfer_buffer_length -
-@@ -3294,6 +3358,10 @@
+@@ -3300,6 +3364,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
  					trb_buff_len, total_packet_count, urb,
  					num_trbs - 1);
  		}
@@ -5222,7 +5222,7 @@
  		length_field = TRB_LEN(trb_buff_len) |
  			remainder |
  			TRB_INTR_TARGET(0);
-@@ -3383,7 +3451,11 @@
+@@ -3389,7 +3457,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
  		field |= 0x1;
  
  	/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
@@ -5234,7 +5234,7 @@
  		if (urb->transfer_buffer_length > 0) {
  			if (setup->bRequestType & USB_DIR_IN)
  				field |= TRB_TX_TYPE(TRB_DATA_IN);
-@@ -3407,7 +3479,12 @@
+@@ -3413,7 +3485,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
  		field = TRB_TYPE(TRB_DATA);
  
  	length_field = TRB_LEN(urb->transfer_buffer_length) |
@@ -5247,7 +5247,7 @@
  		TRB_INTR_TARGET(0);
  	if (urb->transfer_buffer_length > 0) {
  		if (setup->bRequestType & USB_DIR_IN)
-@@ -3530,6 +3607,9 @@
+@@ -3536,6 +3613,9 @@ static int xhci_queue_isoc_tx(struct xhc
  	u64 start_addr, addr;
  	int i, j;
  	bool more_trbs_coming;
@@ -5257,7 +5257,7 @@
  
  	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
  
-@@ -3543,6 +3623,21 @@
+@@ -3549,6 +3629,21 @@ static int xhci_queue_isoc_tx(struct xhc
  	start_trb = &ep_ring->enqueue->generic;
  	start_cycle = ep_ring->cycle_state;
  
@@ -5279,7 +5279,7 @@
  	urb_priv = urb->hcpriv;
  	/* Queue the first TRB, even if it's zero-length */
  	for (i = 0; i < num_tds; i++) {
-@@ -3614,9 +3709,13 @@
+@@ -3620,9 +3715,13 @@ static int xhci_queue_isoc_tx(struct xhc
  			} else {
  				td->last_trb = ep_ring->enqueue;
  				field |= TRB_IOC;
@@ -5293,7 +5293,7 @@
  					/* Set BEI bit except for the last td */
  					if (i < num_tds - 1)
  						field |= TRB_BEI;
-@@ -3631,6 +3730,7 @@
+@@ -3637,6 +3736,7 @@ static int xhci_queue_isoc_tx(struct xhc
  				trb_buff_len = td_remain_len;
  
  			/* Set the TRB length, TD size, & interrupter fields. */
@@ -5301,7 +5301,7 @@
  			if (xhci->hci_version < 0x100) {
  				remainder = xhci_td_remainder(
  						td_len - running_total);
-@@ -3640,6 +3740,10 @@
+@@ -3646,6 +3746,10 @@ static int xhci_queue_isoc_tx(struct xhc
  						total_packet_count, urb,
  						(trbs_per_td - j - 1));
  			}
@@ -5331,7 +5331,7 @@
  #define DRIVER_AUTHOR "Sarah Sharp"
  #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
  
-@@ -46,6 +56,18 @@
+@@ -46,6 +56,18 @@ static unsigned int quirks;
  module_param(quirks, uint, S_IRUGO);
  MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
  
@@ -5350,7 +5350,7 @@
  /* TODO: copied from ehci-hcd.c - can this be refactored? */
  /*
   * xhci_handshake - spin reading hc until handshake completes or fails
-@@ -198,7 +220,7 @@
+@@ -198,7 +220,7 @@ int xhci_reset(struct xhci_hcd *xhci)
  	return ret;
  }
  
@@ -5359,7 +5359,7 @@
  static int xhci_free_msi(struct xhci_hcd *xhci)
  {
  	int i;
-@@ -448,6 +470,11 @@
+@@ -448,6 +470,11 @@ static void compliance_mode_recovery(uns
  					"Attempting compliance mode recovery");
  			hcd = xhci->shared_hcd;
  
@@ -5371,7 +5371,7 @@
  			if (hcd->state == HC_STATE_SUSPENDED)
  				usb_hcd_resume_root_hub(hcd);
  
-@@ -497,6 +524,9 @@
+@@ -497,6 +524,9 @@ static bool xhci_compliance_mode_recover
  {
  	const char *dmi_product_name, *dmi_sys_vendor;
  
@@ -5381,7 +5381,7 @@
  	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
  	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
  	if (!dmi_product_name || !dmi_sys_vendor)
-@@ -542,6 +572,10 @@
+@@ -542,6 +572,10 @@ int xhci_init(struct usb_hcd *hcd)
  		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
  				"xHCI doesn't need link TRB QUIRK");
  	}
@@ -5392,7 +5392,7 @@
  	retval = xhci_mem_init(xhci, GFP_KERNEL);
  	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
  
-@@ -626,7 +660,11 @@
+@@ -626,7 +660,11 @@ int xhci_run(struct usb_hcd *hcd)
  			"// Set the interrupt modulation register");
  	temp = readl(&xhci->ir_set->irq_control);
  	temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -5404,7 +5404,7 @@
  	writel(temp, &xhci->ir_set->irq_control);
  
  	/* Set the HCD state before we enable the irqs */
-@@ -651,6 +689,9 @@
+@@ -651,6 +689,9 @@ int xhci_run(struct usb_hcd *hcd)
  		xhci_queue_vendor_command(xhci, command, 0, 0, 0,
  				TRB_TYPE(TRB_NEC_GET_FW));
  	}
@@ -5414,7 +5414,7 @@
  	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
  			"Finished xhci_run for USB2 roothub");
  	return 0;
-@@ -1642,6 +1683,14 @@
+@@ -1642,6 +1683,14 @@ int xhci_drop_endpoint(struct usb_hcd *h
  	u32 drop_flag;
  	u32 new_add_flags, new_drop_flags;
  	int ret;
@@ -5429,7 +5429,7 @@
  
  	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
  	if (ret <= 0)
-@@ -1689,6 +1738,40 @@
+@@ -1689,6 +1738,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
  
  	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
  
@@ -5470,7 +5470,7 @@
  	xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
  			(unsigned int) ep->desc.bEndpointAddress,
  			udev->slot_id,
-@@ -1721,6 +1804,19 @@
+@@ -1721,6 +1804,19 @@ int xhci_add_endpoint(struct usb_hcd *hc
  	u32 new_add_flags, new_drop_flags;
  	struct xhci_virt_device *virt_dev;
  	int ret = 0;
@@ -5490,7 +5490,7 @@
  
  	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
  	if (ret <= 0) {
-@@ -1787,6 +1883,56 @@
+@@ -1787,6 +1883,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
  		return -ENOMEM;
  	}
  
@@ -5547,7 +5547,7 @@
  	ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
  	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
  
-@@ -4451,8 +4597,14 @@
+@@ -4451,8 +4597,14 @@ static u16 xhci_call_host_update_timeout
  		u16 *timeout)
  {
  	if (state == USB3_LPM_U1)
@@ -5562,7 +5562,7 @@
  		return xhci_calculate_u2_timeout(xhci, udev, desc);
  
  	return USB3_LPM_DISABLED;
-@@ -4837,7 +4989,9 @@
+@@ -4837,7 +4989,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  	hcd->self.no_sg_constraint = 1;
  
  	/* XHCI controllers don't stop the ep queue on short packets :| */
@@ -5572,7 +5572,7 @@
  
  	if (usb_hcd_is_primary_hcd(hcd)) {
  		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-@@ -4900,6 +5054,10 @@
+@@ -4900,6 +5054,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  		goto error;
  	xhci_dbg(xhci, "Reset complete\n");
  
@@ -5583,7 +5583,7 @@
  	/* Set dma_mask and coherent_dma_mask to 64-bits,
  	 * if xHC supports 64-bit addressing */
  	if (HCC_64BIT_ADDR(xhci->hcc_params) &&
-@@ -4994,8 +5152,57 @@
+@@ -4994,8 +5152,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
  MODULE_AUTHOR(DRIVER_AUTHOR);
  MODULE_LICENSE("GPL");
  
@@ -5643,7 +5643,7 @@
  	 * out in specific ways for hardware access.
 --- a/drivers/usb/host/xhci.h
 +++ b/drivers/usb/host/xhci.h
-@@ -32,6 +32,21 @@
+@@ -33,6 +33,21 @@
  #include	"xhci-ext-caps.h"
  #include "pci-quirks.h"
  
@@ -5665,7 +5665,7 @@
  /* xHCI PCI Configuration Registers */
  #define XHCI_SBRN_OFFSET	(0x60)
  
-@@ -1582,8 +1597,12 @@
+@@ -1587,8 +1602,12 @@ struct xhci_hcd {
  	/* Compliance Mode Recovery Data */
  	struct timer_list	comp_mode_recovery_timer;
  	u32			port_status_u0;
@@ -5678,7 +5678,7 @@
  };
  
  /* convert between an HCD pointer and the corresponding EHCI_HCD */
-@@ -1731,6 +1750,26 @@
+@@ -1736,6 +1755,26 @@ void xhci_urb_free_priv(struct xhci_hcd
  void xhci_free_command(struct xhci_hcd *xhci,
  		struct xhci_command *command);
  
diff --git a/target/linux/ramips/patches-3.18/0063-cevt-rt3352.patch b/target/linux/ramips/patches-3.18/0063-cevt-rt3352.patch
index daf8be1360..749701f2e5 100644
--- a/target/linux/ramips/patches-3.18/0063-cevt-rt3352.patch
+++ b/target/linux/ramips/patches-3.18/0063-cevt-rt3352.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ralink/cevt-rt3352.c
 +++ b/arch/mips/ralink/cevt-rt3352.c
-@@ -54,7 +54,7 @@
+@@ -54,7 +54,7 @@ static int systick_next_event(unsigned l
  	sdev = container_of(evt, struct systick_device, dev);
  	count = ioread32(sdev->membase + SYSTICK_COUNT);
  	count = (count + delta) % SYSTICK_FREQ;
diff --git a/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch b/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch
index 9ee55d5d4d..32cea7ded9 100644
--- a/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch
+++ b/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/mtdpart.c
 +++ b/drivers/mtd/mtdpart.c
-@@ -821,9 +821,6 @@ static void split_uimage(struct mtd_info
+@@ -818,9 +818,6 @@ static void split_uimage(struct mtd_info
  		return;
  
  	len = be32_to_cpu(hdr.size) + 0x40;
diff --git a/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch b/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch
index c3012fb933..6f6458fc1c 100644
--- a/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch
+++ b/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/mtdpart.c
 +++ b/drivers/mtd/mtdpart.c
-@@ -809,8 +809,11 @@ static void split_uimage(struct mtd_info
+@@ -806,8 +806,11 @@ static void split_uimage(struct mtd_info
  {
  	struct {
  		__be32 magic;
@@ -13,7 +13,7 @@
  	} hdr;
  	size_t len;
  
-@@ -820,7 +823,10 @@ static void split_uimage(struct mtd_info
+@@ -817,7 +820,10 @@ static void split_uimage(struct mtd_info
  	if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
  		return;
  
diff --git a/target/linux/ramips/patches-3.18/0111-i2c-MIPS-add-mt7621-I2C-driver.patch b/target/linux/ramips/patches-3.18/0111-i2c-MIPS-add-mt7621-I2C-driver.patch
index 5df95f40bb..b34581ed63 100755..100644
--- a/target/linux/ramips/patches-3.18/0111-i2c-MIPS-add-mt7621-I2C-driver.patch
+++ b/target/linux/ramips/patches-3.18/0111-i2c-MIPS-add-mt7621-I2C-driver.patch
@@ -1,8 +1,6 @@
-Index: linux-3.18.9/drivers/i2c/busses/Kconfig
-===================================================================
---- linux-3.18.9.orig/drivers/i2c/busses/Kconfig	2015-03-23 15:00:11.730403938 +0800
-+++ linux-3.18.9/drivers/i2c/busses/Kconfig	2015-03-23 15:00:11.982403926 +0800
-@@ -714,6 +714,10 @@
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -714,6 +714,10 @@ config I2C_RALINK
  	tristate "Ralink I2C Controller"
  	select OF_I2C
  
@@ -13,11 +11,9 @@ Index: linux-3.18.9/drivers/i2c/busses/Kconfig
  config HAVE_S3C2410_I2C
  	bool
  	help
-Index: linux-3.18.9/drivers/i2c/busses/Makefile
-===================================================================
---- linux-3.18.9.orig/drivers/i2c/busses/Makefile	2015-03-23 15:00:11.730403938 +0800
-+++ linux-3.18.9/drivers/i2c/busses/Makefile	2015-03-23 15:00:11.982403926 +0800
-@@ -67,6 +67,7 @@
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -67,6 +67,7 @@ obj-$(CONFIG_I2C_PUV3)		+= i2c-puv3.o
  obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
  obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
  obj-$(CONFIG_I2C_RALINK)	+= i2c-ralink.o
@@ -25,10 +21,8 @@ Index: linux-3.18.9/drivers/i2c/busses/Makefile
  obj-$(CONFIG_I2C_QUP)		+= i2c-qup.o
  obj-$(CONFIG_I2C_RIIC)		+= i2c-riic.o
  obj-$(CONFIG_I2C_RK3X)		+= i2c-rk3x.o
-Index: linux-3.18.9/drivers/i2c/busses/i2c-mt7621.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.18.9/drivers/i2c/busses/i2c-mt7621.c	2015-03-23 16:31:42.684747034 +0800
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-mt7621.c
 @@ -0,0 +1,303 @@
 +/*
 + * drivers/i2c/busses/i2c-mt7621.c