aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2018-06-16 00:27:51 +0900
committerMathias Kresin <dev@kresin.me>2018-06-19 22:46:04 +0200
commitda318f3522344ae3344b94c85dae41eeb53b04cc (patch)
tree37fdb1d50aa02411f7eeb920e9ecf9fbe81c0d94 /target/linux/ramips
parentafe0320ffc212b405e068281d636626df754261e (diff)
downloadupstream-da318f3522344ae3344b94c85dae41eeb53b04cc.tar.gz
upstream-da318f3522344ae3344b94c85dae41eeb53b04cc.tar.bz2
upstream-da318f3522344ae3344b94c85dae41eeb53b04cc.zip
ramips: add support for ELECOM WRC-1167GHBK2-S
ELECOM WRC-1167GHBK2-S is a 2.4/5 GHz band 11ac router, based on MediaTek MT7621A. Specification: - MT7621A (2-Cores, 4-Threads) - 128 MB of RAM (DDR3) - 16 MB of Flash (SPI) - 2T2R 2.4/5 GHz - MediaTek MT7615D - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 2x keys - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - baudrate: 57600 bps Flash instruction using factory image: 1. Rename the factory image to "wrc-1167ghbk2-s_v0.00.bin" 2. Connect the computer to the LAN port of WRC-1167GHBK2-S 3. Connect power cable to WRC-1167GHBK2-S and turn on it 4. Access to "http://192.168.2.1/details.html" and open firmware update page ("手動更新(アップデート)") 5. Select the factory image and click apply ("適用") button 6. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ramips')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds1
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network10
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/WRC-1167GHBK2-S.dts144
-rw-r--r--target/linux/ramips/image/mt7621.mk22
6 files changed, 175 insertions, 4 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index a9a68f6eef..54504c6ee8 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -168,6 +168,7 @@ dlink,dwr-921-c1)
ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0"
;;
dir-810l|\
+elecom,wrc-1167ghbk2-s|\
iodata,wn-gx300gr|\
mzk-750dhp|\
mzk-dp150n|\
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 49d7f9220a..de086cf248 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -226,7 +226,8 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
;;
- dir-860l-b1)
+ dir-860l-b1|\
+ elecom,wrc-1167ghbk2-s)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
;;
@@ -450,6 +451,10 @@ ramips_setup_macs()
e1700)
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
;;
+ elecom,wrc-1167ghbk2-s|\
+ sk-wb8)
+ wan_mac=$(mtd_get_mac_binary factory 57350)
+ ;;
gl-mt300n-v2|\
whr-g300n)
wan_mac=$(mtd_get_mac_binary factory 4)
@@ -514,9 +519,6 @@ ramips_setup_macs()
lan_mac=$(macaddr_setbit_la "$lan_mac")
wan_mac=$(mtd_get_mac_binary factory 32772)
;;
- sk-wb8)
- wan_mac=$(mtd_get_mac_binary factory 57350)
- ;;
tew-691gr)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3)
;;
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index e5373a80d1..eb06442979 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -22,6 +22,7 @@ get_status_led() {
dch-m225|\
dir-860l-b1|\
e1700|\
+ elecom,wrc-1167ghbk2-s|\
ex2700|\
ex3700|\
fonera20n|\
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 9b17ecbebb..c094e41935 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -54,6 +54,7 @@ platform_check_image() {
dir-810l|\
duzun-dm06|\
e1700|\
+ elecom,wrc-1167ghbk2-s|\
esr-9753|\
ew1200|\
ex2700|\
diff --git a/target/linux/ramips/dts/WRC-1167GHBK2-S.dts b/target/linux/ramips/dts/WRC-1167GHBK2-S.dts
new file mode 100644
index 0000000000..7b1cfd7304
--- /dev/null
+++ b/target/linux/ramips/dts/WRC-1167GHBK2-S.dts
@@ -0,0 +1,144 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "elecom,wrc-1167ghbk2-s", "mediatek,mt7621-soc";
+ model = "ELECOM WRC-1167GHBK2-S";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "wrc-1167ghbk2-s:white:wlan2g";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "wrc-1167ghbk2-s:white:wlan5g";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+
+ power_green {
+ label = "wrc-1167ghbk2-s:green:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_blue {
+ label = "wrc-1167ghbk2-s:blue:power";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "wrc-1167ghbk2-s:red:wps";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_red {
+ label = "wrc-1167ghbk2-s:red:power";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf20000>;
+ };
+
+ partition@f70000 {
+ label = "user_data";
+ reg = <0xf70000 0x80000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "NVRAM";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uart3", "jtag", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+ // WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
+ // but it's not supported in OpenWrt.
+};
+
+&xhci {
+ status = "disabled";
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index f8fb28196b..f6f8ea065b 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -4,6 +4,18 @@
DEVICE_VARS += TPLINK_BOARD_ID TPLINK_HEADER_VERSION TPLINK_HWID TPLINK_HWREV
+define Build/elecom-wrc-factory
+ $(eval product=$(word 1,$(1)))
+ $(eval version=$(word 2,$(1)))
+ $(STAGING_DIR_HOST)/bin/mkhash md5 $@ >> $@
+ ( \
+ echo -n "ELECOM $(product) v$(version)" | \
+ dd bs=32 count=1 conv=sync; \
+ dd if=$@; \
+ ) > $@.new
+ mv $@.new $@
+endef
+
define Build/ubnt-erx-factory-image
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
echo '21001:6' > $(1).compat; \
@@ -65,6 +77,16 @@ define Device/mediatek_ap-mt7621a-v60
endef
TARGET_DEVICES += mediatek_ap-mt7621a-v60
+define Device/elecom_wrc-1167ghbk2-s
+ DTS := WRC-1167GHBK2-S
+ IMAGE_SIZE := 15488k
+ DEVICE_TITLE := ELECOM WRC-1167GHBK2-S
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) |\
+ elecom-wrc-factory WRC-1167GHBK2-S 0.00
+endef
+TARGET_DEVICES += elecom_wrc-1167ghbk2-s
+
define Device/ew1200
DTS := EW1200
IMAGE_SIZE := $(ralink_default_fw_size_16M)