ramips: add support for 3.8

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35801 3c298f89-4303-0410-b956-a3cf2f4a3e73

14 files changed, 788 insertions, 0 deletions

diff --git a/target/linux/ramips/patches-3.8/001-mips-add-cp0-compare-irq-function.patch b/target/linux/ramips/patches-3.8/001-mips-add-cp0-compare-irq-function.patch
new file mode 100644
index 0000000000..d7678615bc
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/001-mips-add-cp0-compare-irq-function.patch
@@ -0,0 +1,29 @@
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -55,6 +55,7 @@
+ #include <asm/types.h>
+ #include <asm/stacktrace.h>
+ #include <asm/uasm.h>
++#include <asm/time.h>
+ 
+ extern void check_wait(void);
+ extern asmlinkage void r4k_wait(void);
+@@ -1617,6 +1618,8 @@ void __cpuinit per_cpu_trap_init(bool is
+ 	if (cpu_has_mips_r2) {
+ 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+ 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
++		if (get_c0_compare_irq)
++			cp0_compare_irq = get_c0_compare_irq();
+ 		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
+ 		if (cp0_perfcount_irq == cp0_compare_irq)
+ 			cp0_perfcount_irq = -1;
+--- a/arch/mips/include/asm/time.h
++++ b/arch/mips/include/asm/time.h
+@@ -51,6 +51,7 @@ extern int (*perf_irq)(void);
+  * Initialize the calling CPU's compare interrupt as clockevent device
+  */
+ extern unsigned int __weak get_c0_compare_int(void);
++extern unsigned int __weak get_c0_compare_irq(void);
+ extern int r4k_clockevent_init(void);
+ 
+ static inline int mips_clockevent_init(void)
diff --git a/target/linux/ramips/patches-3.8/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch b/target/linux/ramips/patches-3.8/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
new file mode 100644
index 0000000000..91b887f922
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
@@ -0,0 +1,20 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1939,7 +1939,7 @@ static int __xipram do_erase_chip(struct
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr))
++		if (chip_good(map, adr, map_word_ff(map)))
+ 			break;
+ 
+ 		if (time_after(jiffies, timeo)) {
+@@ -2028,7 +2028,7 @@ static int __xipram do_erase_oneblock(st
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr)) {
++		if (chip_good(map, adr, map_word_ff(map))) {
+ 			xip_enable(map, chip, adr);
+ 			break;
+ 		}
diff --git a/target/linux/ramips/patches-3.8/011-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ramips/patches-3.8/011-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644
index 0000000000..25ae351e65
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/011-mtd-cfi_cmdset_0002-force-word-write.patch
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -39,7 +39,7 @@
+ #include <linux/mtd/xip.h>
+ 
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ 
+ #define MAX_WORD_RETRIES 3
+ 
+@@ -50,7 +50,9 @@
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+ 
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+ 	struct map_info *map = mtd->priv;
+@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
+ 		mtd->_write = cfi_amdstd_write_buffers;
+ 	}
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1443,6 +1447,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ 				    unsigned long adr, const u_char *buf,
+ 				    int len)
+@@ -1567,7 +1572,6 @@ static int __xipram do_write_buffer(stru
+ 	return ret;
+ }
+ 
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ 				    size_t *retlen, const u_char *buf)
+ {
+@@ -1642,6 +1646,7 @@ static int cfi_amdstd_write_buffers(stru
+ 
+ 	return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /*
+  * Wait for the flash chip to become ready to write data
diff --git a/target/linux/ramips/patches-3.8/100-mips-ralink-core.patch b/target/linux/ramips/patches-3.8/100-mips-ralink-core.patch
new file mode 100644
index 0000000000..e2d8987211
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/100-mips-ralink-core.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -104,6 +104,9 @@ config ATH79
+ 	help
+ 	  Support for the Atheros AR71XX/AR724X/AR913X SoCs.
+ 
++config MIPS_RALINK
++	bool "Ralink MIPS SoC based boards"
++
+ config BCM47XX
+ 	bool "Broadcom BCM47XX based boards"
+ 	select ARCH_WANT_OPTIONAL_GPIOLIB
+@@ -845,6 +848,7 @@ source "arch/mips/jz4740/Kconfig"
+ source "arch/mips/lantiq/Kconfig"
+ source "arch/mips/lasat/Kconfig"
+ source "arch/mips/pmc-sierra/Kconfig"
++source "arch/mips/ralink/Kconfig"
+ source "arch/mips/powertv/Kconfig"
+ source "arch/mips/sgi-ip27/Kconfig"
+ source "arch/mips/sibyte/Kconfig"
+@@ -1172,7 +1176,7 @@ config BOOT_ELF32
+ 
+ config MIPS_L1_CACHE_SHIFT
+ 	int
+-	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
++	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
+ 	default "6" if MIPS_CPU_SCACHE
+ 	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
+ 	default "5"
+--- a/arch/mips/Kbuild.platforms
++++ b/arch/mips/Kbuild.platforms
+@@ -22,6 +22,7 @@ platforms += pmc-sierra
+ platforms += pnx833x
+ platforms += pnx8550
+ platforms += powertv
++platforms += ralink
+ platforms += rb532
+ platforms += sgi-ip22
+ platforms += sgi-ip27
diff --git a/target/linux/ramips/patches-3.8/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-3.8/101-rt288x_serial_driver_hack.patch
new file mode 100644
index 0000000000..e54c100406
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/101-rt288x_serial_driver_hack.patch
@@ -0,0 +1,89 @@
+--- a/drivers/tty/serial/8250/Kconfig
++++ b/drivers/tty/serial/8250/Kconfig
+@@ -249,6 +249,14 @@ config SERIAL_8250_ACORN
+ 	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
+ 	  cards.  If unsure, say N.
+ 
++config SERIAL_8250_RT288X
++	bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
++	depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
++	help
++	  If you have a Ralink RT288x/RT305x SoC based board and want to use the
++	  serial port, say Y to this option. The driver can handle up to 2 serial
++	  ports. If unsure, say N.
++
+ config SERIAL_8250_RM9K
+ 	bool "Support for MIPS RM9xxx integrated serial port"
+ 	depends on SERIAL_8250 != n && SERIAL_RM9000
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -134,7 +134,7 @@ struct uart_port {
+ #define UPIO_HUB6		(1)
+ #define UPIO_MEM		(2)
+ #define UPIO_MEM32		(3)
+-#define UPIO_AU			(4)			/* Au1x00 type IO */
++#define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
+ #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
+ #define UPIO_RM9000		(6)			/* RM9000 type IO */
+ 
+--- a/drivers/tty/serial/8250/8250.c
++++ b/drivers/tty/serial/8250/8250.c
+@@ -324,9 +324,9 @@ static void default_serial_dl_write(stru
+ 	serial_out(up, UART_DLM, value >> 8 & 0xff);
+ }
+ 
+-#ifdef CONFIG_MIPS_ALCHEMY
++#if defined CONFIG_MIPS_ALCHEMY || defined (CONFIG_SERIAL_8250_RT288X)
+ 
+-/* Au1x00 UART hardware has a weird register layout */
++/* Au1x00 and RT288x UART hardware has a weird register layout */
+ static const u8 au_io_in_map[] = {
+ 	[UART_RX]  = 0,
+ 	[UART_IER] = 2,
+@@ -506,7 +506,7 @@ static void set_io_from_upio(struct uart
+ 		break;
+ #endif
+ 
+-#ifdef CONFIG_MIPS_ALCHEMY
++#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
+ 	case UPIO_AU:
+ 		p->serial_in = au_serial_in;
+ 		p->serial_out = au_serial_out;
+@@ -731,22 +731,19 @@ static int size_fifo(struct uart_8250_po
+  */
+ static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
+ {
+-	unsigned char old_dll, old_dlm, old_lcr;
++	unsigned char old_lcr;
++	unsigned int old_dl;
+ 	unsigned int id;
+ 
+ 	old_lcr = serial_in(p, UART_LCR);
+ 	serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
+ 
+-	old_dll = serial_in(p, UART_DLL);
+-	old_dlm = serial_in(p, UART_DLM);
++	old_dl = serial_dl_read(p);
+ 
+-	serial_out(p, UART_DLL, 0);
+-	serial_out(p, UART_DLM, 0);
++	serial_dl_write(p, 0);
++	id = serial_dl_read(p);
+ 
+-	id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
+-
+-	serial_out(p, UART_DLL, old_dll);
+-	serial_out(p, UART_DLM, old_dlm);
++	serial_dl_write(p, old_dl);
+ 	serial_out(p, UART_LCR, old_lcr);
+ 
+ 	return id;
+@@ -872,7 +869,7 @@ static int broken_efr(struct uart_8250_p
+ 	/*
+ 	 * Exar ST16C2550 "A2" devices incorrectly detect as
+ 	 * having an EFR, and report an ID of 0x0201.  See
+-	 * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html 
++	 * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
+ 	 */
+ 	if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
+ 		return 1;
diff --git a/target/linux/ramips/patches-3.8/102-rt288x-pci-driver-hook.patch b/target/linux/ramips/patches-3.8/102-rt288x-pci-driver-hook.patch
new file mode 100644
index 0000000000..a76603f144
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/102-rt288x-pci-driver-hook.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -21,6 +21,7 @@ obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o
+ obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
+ obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
+ obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
++obj-$(CONFIG_SOC_RT288X)	+= pci-rt288x.o
+ 
+ #
+ # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ramips/patches-3.8/103-ethernet.patch b/target/linux/ramips/patches-3.8/103-ethernet.patch
new file mode 100644
index 0000000000..5909cf28e1
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/103-ethernet.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -136,6 +136,7 @@ source "drivers/net/ethernet/packetengin
+ source "drivers/net/ethernet/pasemi/Kconfig"
+ source "drivers/net/ethernet/qlogic/Kconfig"
+ source "drivers/net/ethernet/racal/Kconfig"
++source "drivers/net/ethernet/ramips/Kconfig"
+ source "drivers/net/ethernet/realtek/Kconfig"
+ source "drivers/net/ethernet/renesas/Kconfig"
+ source "drivers/net/ethernet/rdc/Kconfig"
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -54,6 +54,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
+ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
+ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
++obj-$(CONFIG_NET_RAMIPS) += ramips/
+ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+ obj-$(CONFIG_SH_ETH) += renesas/
+ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
diff --git a/target/linux/ramips/patches-3.8/104-ramips-watchdog-driver.patch b/target/linux/ramips/patches-3.8/104-ramips-watchdog-driver.patch
new file mode 100644
index 0000000000..69ee00474b
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/104-ramips-watchdog-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -1076,6 +1076,13 @@ config LANTIQ_WDT
+ 	help
+ 	  Hardware driver for the Lantiq SoC Watchdog Timer.
+ 
++config RAMIPS_WDT
++	tristate "Ralink RT288X/RT305X Watchdog Timer"
++	depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883)
++	help
++	  Hardware driver for the built-in watchdog timer on the
++	  Ralink RT288X/RT305X SoCs.
++
+ # PARISC Architecture
+ 
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+ obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
++obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o
+ 
+ # PARISC Architecture
+ 
diff --git a/target/linux/ramips/patches-3.8/105-ramips-spi-driver.patch b/target/linux/ramips/patches-3.8/105-ramips-spi-driver.patch
new file mode 100644
index 0000000000..7665ab4b9d
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/105-ramips-spi-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -324,6 +324,12 @@ config SPI_RSPI
+ 	help
+ 	  SPI driver for Renesas RSPI blocks.
+ 
++config SPI_RAMIPS
++	tristate "Ralink RT288x/RT305x/RT3662 SPI Controller"
++	depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883)
++	help
++	  This selects a driver for the Ralink RT288x/RT305x SPI Controller.
++
+ config SPI_S3C24XX
+ 	tristate "Samsung S3C24XX series SPI"
+ 	depends on ARCH_S3C24XX && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -50,6 +50,7 @@ obj-$(CONFIG_SPI_PL022)			+= spi-pl022.o
+ obj-$(CONFIG_SPI_PPC4xx)		+= spi-ppc4xx.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa2xx-pci.o
++obj-$(CONFIG_SPI_RAMIPS)		+= spi-ramips.o
+ obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
+ obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y			:= spi-s3c24xx.o
diff --git a/target/linux/ramips/patches-3.8/105-usb_dwc_otg.patch b/target/linux/ramips/patches-3.8/105-usb_dwc_otg.patch
new file mode 100644
index 0000000000..88c211569b
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/105-usb_dwc_otg.patch
@@ -0,0 +1,20 @@
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -188,4 +188,6 @@ source "drivers/usb/gadget/Kconfig"
+ 
+ source "drivers/usb/otg/Kconfig"
+ 
++source "drivers/usb/dwc_otg/Kconfig"
++
+ endif # USB_SUPPORT
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -52,6 +52,8 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early
+ obj-$(CONFIG_USB_ATM)		+= atm/
+ obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
+ 
++obj-$(CONFIG_DWC_OTG)		+= dwc_otg/
++
+ obj-$(CONFIG_USB_MUSB_HDRC)	+= musb/
+ obj-$(CONFIG_USB_CHIPIDEA)	+= chipidea/
+ obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs/
diff --git a/target/linux/ramips/patches-3.8/106-rt3883-pci-support.patch b/target/linux/ramips/patches-3.8/106-rt3883-pci-support.patch
new file mode 100644
index 0000000000..9f5ef9f73f
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/106-rt3883-pci-support.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -22,6 +22,7 @@ obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchem
+ obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
+ obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
+ obj-$(CONFIG_SOC_RT288X)	+= pci-rt288x.o
++obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
+ 
+ #
+ # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ramips/rt288x/config-3.8 b/target/linux/ramips/rt288x/config-3.8
new file mode 100644
index 0000000000..ab705e0068
--- /dev/null
+++ b/target/linux/ramips/rt288x/config-3.8
@@ -0,0 +1,133 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP17XX_PHY=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MII is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MIPS_RALINK=y
+# CONFIG_MIPS_SEAD3 is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RAMIPS=y
+# CONFIG_NET_RAMIPS_DEBUG is not set
+# CONFIG_NET_RAMIPS_DEBUG_FS is not set
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERCPU_RWSEM=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK_DEV_GPIO_BUTTONS=y
+CONFIG_RALINK_DEV_GPIO_LEDS=y
+CONFIG_RALINK_RT288X=y
+# CONFIG_RALINK_RT305X is not set
+# CONFIG_RALINK_RT3883 is not set
+CONFIG_RAMIPS_WDT=y
+CONFIG_RT288X_MACH_BR6524N=y
+CONFIG_RT288X_MACH_F5D8235_V1=y
+CONFIG_RT288X_MACH_RT_N15=y
+CONFIG_RT288X_MACH_V11ST_FE=y
+CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
+CONFIG_RT288X_MACH_WZR_AGL300NH=y
+CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_RT288X=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt305x/config-3.8 b/target/linux/ramips/rt305x/config-3.8
new file mode 100644
index 0000000000..64fac151eb
--- /dev/null
+++ b/target/linux/ramips/rt305x/config-3.8
@@ -0,0 +1,166 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DWC_OTG is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MII is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MIPS_RALINK=y
+# CONFIG_MIPS_SEAD3 is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RAMIPS=y
+# CONFIG_NET_RAMIPS_DEBUG is not set
+# CONFIG_NET_RAMIPS_DEBUG_FS is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PERCPU_RWSEM=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK_DEV_GPIO_BUTTONS=y
+CONFIG_RALINK_DEV_GPIO_LEDS=y
+# CONFIG_RALINK_RT288X is not set
+CONFIG_RALINK_RT305X=y
+# CONFIG_RALINK_RT3883 is not set
+CONFIG_RAMIPS_WDT=y
+CONFIG_RT305X_MACH_3G300M=y
+CONFIG_RT305X_MACH_3G_6200N=y
+CONFIG_RT305X_MACH_AIR3GII=y
+CONFIG_RT305X_MACH_ALL0256N=y
+CONFIG_RT305X_MACH_ALL5002=y
+CONFIG_RT305X_MACH_ARGUS_ATP52B=y
+CONFIG_RT305X_MACH_BC2=y
+CONFIG_RT305X_MACH_BR6425=y
+CONFIG_RT305X_MACH_BROADWAY=y
+CONFIG_RT305X_MACH_CARAMBOLA=y
+CONFIG_RT305X_MACH_DAP_1350=y
+CONFIG_RT305X_MACH_DIR_300_REVB=y
+CONFIG_RT305X_MACH_DIR_615_H1=y
+CONFIG_RT305X_MACH_ESR_9753=y
+CONFIG_RT305X_MACH_F5D8235_V2=y
+CONFIG_RT305X_MACH_FONERA20N=y
+CONFIG_RT305X_MACH_FREESTATION5=y
+CONFIG_RT305X_MACH_HW550_3G=y
+CONFIG_RT305X_MACH_MOFI3500_3GN=y
+CONFIG_RT305X_MACH_MZKW300NH2=y
+CONFIG_RT305X_MACH_NBG_419N=y
+CONFIG_RT305X_MACH_NW718=y
+CONFIG_RT305X_MACH_OMNI_EMB=y
+CONFIG_RT305X_MACH_PSR_680W=y
+CONFIG_RT305X_MACH_PWH2004=y
+CONFIG_RT305X_MACH_RT_G32_REVB=y
+CONFIG_RT305X_MACH_RT_N10_PLUS=y
+CONFIG_RT305X_MACH_RT_N13U=y
+CONFIG_RT305X_MACH_SL_R7205=y
+CONFIG_RT305X_MACH_UR_336UN=y
+CONFIG_RT305X_MACH_V22RW_2X2=y
+CONFIG_RT305X_MACH_W306R_V20=y
+CONFIG_RT305X_MACH_W502U=y
+CONFIG_RT305X_MACH_WCR150GN=y
+CONFIG_RT305X_MACH_WHR_G300N=y
+CONFIG_RT305X_MACH_WL341V3=y
+CONFIG_RT305X_MACH_WL351=y
+CONFIG_RT305X_MACH_WL_330N=y
+CONFIG_RT305X_MACH_WL_330N3G=y
+CONFIG_RT305X_MACH_WR512_3GN=y
+CONFIG_RT305X_MACH_WR6202=y
+CONFIG_RT305X_MACH_XDX_RN502J=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_RT305X=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RAMIPS=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt3883/config-3.8 b/target/linux/ramips/rt3883/config-3.8
new file mode 100644
index 0000000000..5adcbaa344
--- /dev/null
+++ b/target/linux/ramips/rt3883/config-3.8
@@ -0,0 +1,140 @@
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MII is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MIPS_RALINK=y
+# CONFIG_MIPS_SEAD3 is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RAMIPS=y
+# CONFIG_NET_RAMIPS_DEBUG is not set
+# CONFIG_NET_RAMIPS_DEBUG_FS is not set
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERCPU_RWSEM=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK_DEV_GPIO_BUTTONS=y
+CONFIG_RALINK_DEV_GPIO_LEDS=y
+# CONFIG_RALINK_RT288X is not set
+# CONFIG_RALINK_RT305X is not set
+CONFIG_RALINK_RT3883=y
+CONFIG_RAMIPS_WDT=y
+CONFIG_RT3883_MACH_DIR_645=y
+CONFIG_RT3883_MACH_OMNI_EMB_HPM=y
+CONFIG_RT3883_MACH_RT_N56U=y
+CONFIG_RT3883_MACH_TEW_691GR=y
+CONFIG_RT3883_MACH_TEW_692GR=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367B_PHY=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_RT3883=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RAMIPS=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_ZONE_DMA_FLAG=0