aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorSungbo Eo <mans0n@gorani.run>2019-11-13 23:29:21 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-11-13 16:03:42 +0100
commitaabdf6991cce55a76540c91ff3b5177afd8dce99 (patch)
treec3bcdf475a72d697f8b6eb243bff3cac14ffccad /target/linux/ramips
parent7231c1edd99217c6baa8d7d5d841d75ad9de26f1 (diff)
downloadupstream-aabdf6991cce55a76540c91ff3b5177afd8dce99.tar.gz
upstream-aabdf6991cce55a76540c91ff3b5177afd8dce99.tar.bz2
upstream-aabdf6991cce55a76540c91ff3b5177afd8dce99.zip
ramips: improve Samsung CY-SWR1100 support
This patch does the following: - rename "devdata" flash partition and make it read-only - switch from gpio-keys-polled to gpio-keys - add missing power LED - set correct PCI ID to compatible string in wifi node - remove ralink,5ghz property in wifi node - provide label MAC address Rename devdata partition to devconf as indicated in the stock firmware partition table: 00030000-00040000: "devdata" 00040000-00050000: "devconf" Power LED can be controlled by SoC GPIO. Add it in the dts leds node. RT3092L supports only bgn mode, so it is unnecessary to disable 5GHz band. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ramips')
-rw-r--r--target/linux/ramips/dts/rt3662_samsung_cy-swr1100.dts14
-rwxr-xr-xtarget/linux/ramips/rt3883/base-files/etc/board.d/02_network1
2 files changed, 10 insertions, 5 deletions
diff --git a/target/linux/ramips/dts/rt3662_samsung_cy-swr1100.dts b/target/linux/ramips/dts/rt3662_samsung_cy-swr1100.dts
index a25d9d02c1..7bab768fe4 100644
--- a/target/linux/ramips/dts/rt3662_samsung_cy-swr1100.dts
+++ b/target/linux/ramips/dts/rt3662_samsung_cy-swr1100.dts
@@ -49,8 +49,9 @@
};
partition@40000 {
- label = "devdata";
+ label = "devconf";
reg = <0x40000 0x10000>;
+ read-only;
};
partition@50000 {
@@ -69,8 +70,7 @@
};
keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
+ compatible = "gpio-keys";
reset {
label = "reset";
@@ -99,6 +99,11 @@
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
+
+ power {
+ label = "cy-swr1100:blue:power";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
};
};
@@ -130,9 +135,8 @@
status = "okay";
wifi@0,0 {
- compatible = "pci0,0";
+ compatible = "pci1814,3091";
reg = <0x10000 0 0 0 0>;
- ralink,5ghz = <0>;
ralink,mtd-eeprom = <&factory 0x2000>;
};
};
diff --git a/target/linux/ramips/rt3883/base-files/etc/board.d/02_network b/target/linux/ramips/rt3883/base-files/etc/board.d/02_network
index 2ef0e319bb..873c72cea3 100755
--- a/target/linux/ramips/rt3883/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/rt3883/base-files/etc/board.d/02_network
@@ -72,6 +72,7 @@ ramips_setup_macs()
samsung,cy-swr1100)
lan_mac=$(mtd_get_mac_ascii nvram lanmac)
wan_mac=$(mtd_get_mac_ascii nvram wanmac)
+ label_mac=$wan_mac
;;
sitecom,wlr-6000)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x8004)" 2)