aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorblogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>2016-04-29 11:34:56 +0000
committerJo-Philipp Wich <jo@mein.io>2016-05-10 10:43:12 +0200
commit6b0425a18773552f109cadf918ee6b4bcc60eec0 (patch)
treec163cc8acc3eab65b48b4338ef69dd495734d6f1 /target/linux/ramips
parent23596ca527d2d7a0b197d3f9e8afdb9acd76273a (diff)
downloadupstream-6b0425a18773552f109cadf918ee6b4bcc60eec0.tar.gz
upstream-6b0425a18773552f109cadf918ee6b4bcc60eec0.tar.bz2
upstream-6b0425a18773552f109cadf918ee6b4bcc60eec0.zip
ramips: add support for Planex MZK-EX750NP.
add support for Planex MZK-EX750NP. MZK-EX750NP is MT7620A and MT7610E based 11ac wifi repeater. Built-in power supply. 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 49268
Diffstat (limited to 'target/linux/ramips')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/MZK-EX750NP.dts150
-rw-r--r--target/linux/ramips/image/mt7620.mk2
-rw-r--r--target/linux/ramips/mt7620/profiles/planex.mk11
8 files changed, 174 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index aeaab3395a..47e1e6a6a3 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -206,6 +206,10 @@ mr-102n)
set_wifi_led "$board:green:wlan"
set_usb_led "$board:green:usb"
;;
+mzk-ex750np)
+ ucidef_set_led_default "power" "power" "$board:red:power" "1"
+ set_wifi_led "$board:red:wifi"
+ ;;
na930)
set_usb_led "$board:blue:status"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index c6c740f623..ee690f6375 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -165,6 +165,7 @@ ramips_setup_interfaces()
d105|\
hpm|\
mzk-ex300np|\
+ mzk-ex750np|\
na930|\
wli-tx4-ag300n|\
wrh-300cr)
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 20ff8fff38..c638d16a81 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -41,7 +41,8 @@ get_status_led() {
hlk-rm04|\
jhr-n825r|\
mpr-a1|\
- mpr-a2)
+ mpr-a2|\
+ mzk-ex750np)
status_led="$board:red:power"
;;
ai-br100|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 2c669c5a5b..0ac0f68bb5 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -298,6 +298,9 @@ ramips_board_detect() {
*"MZK-EX300NP")
name="mzk-ex300np"
;;
+ *"MZK-EX750NP")
+ name="mzk-ex750np"
+ ;;
*"MZK-W300NH2"*)
name="mzk-w300nh2"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 2b24030ecd..86ea4a33bd 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -90,6 +90,7 @@ platform_check_image() {
mzk-750dhp|\
mzk-dp150n|\
mzk-ex300np|\
+ mzk-ex750np|\
mzk-w300nh2|\
mzk-wdpr|\
nbg-419n|\
diff --git a/target/linux/ramips/dts/MZK-EX750NP.dts b/target/linux/ramips/dts/MZK-EX750NP.dts
new file mode 100644
index 0000000000..9b5b418080
--- /dev/null
+++ b/target/linux/ramips/dts/MZK-EX750NP.dts
@@ -0,0 +1,150 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+ model = "Planex MZK-EX750NP";
+
+ palmbus@10000000 {
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ gpio3: gpio@688 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q64";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x730000>;
+ };
+
+ partition@780000 {
+ label = "Udata";
+ reg = <0x780000 0x80000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pcie@10140000 {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "mzk-ex750np:red:power";
+ gpios = <&gpio0 14 1>;
+ };
+
+ wifi {
+ label = "mzk-ex750np:red:wifi";
+ gpios = <&gpio3 0 1>;
+ };
+
+ wps {
+ label = "mzk-ex750np:green:wps";
+ gpios = <&gpio0 10 1>;
+ };
+
+ rep {
+ label = "mzk-ex750np:blue:rep";
+ gpios = <&gpio2 16 1>;
+ };
+
+ wifi1 {
+ label = "mzk-ex750np:blue:wifi1";
+ gpios = <&gpio2 19 1>;
+ };
+
+ wifi2 {
+ label = "mzk-ex750np:blue:wifi2";
+ gpios = <&gpio2 18 1>;
+ };
+
+ wifi3 {
+ label = "mzk-ex750np:blue:wifi3";
+ gpios = <&gpio2 17 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 9 1>;
+ linux,code = <0x198>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 13 0>;
+ linux,code = <0x211>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 35cb46a52d..09c0ec27a0 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -102,6 +102,7 @@ Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930
Image/Build/Profile/DB-WRT01=$(call BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01)
Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
Image/Build/Profile/MZK-EX300NP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-ex300np,MZK-EX300NP)
+Image/Build/Profile/MZK-EX750NP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-ex750np,MZK-EX750NP)
Image/Build/Profile/HC5661=$(call BuildFirmware/Default16M/$(1),$(1),hc5661,HC5661)
Image/Build/Profile/HC5761=$(call BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761)
Image/Build/Profile/HC5861=$(call BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861)
@@ -149,6 +150,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/DB-WRT01,$(1))
$(call Image/Build/Profile/MZK-750DHP,$(1))
$(call Image/Build/Profile/MZK-EX300NP,$(1))
+ $(call Image/Build/Profile/MZK-EX750NP,$(1))
$(call Image/Build/Profile/NA930,$(1))
$(call Image/Build/Profile/HC5661,$(1))
$(call Image/Build/Profile/HC5761,$(1))
diff --git a/target/linux/ramips/mt7620/profiles/planex.mk b/target/linux/ramips/mt7620/profiles/planex.mk
index 157cf8d334..f461aeb211 100644
--- a/target/linux/ramips/mt7620/profiles/planex.mk
+++ b/target/linux/ramips/mt7620/profiles/planex.mk
@@ -39,3 +39,14 @@ define Profile/MZK-EX300NP/Description
Package set optimized for the Planex MZK-EX300NP.
endef
$(eval $(call Profile,MZK-EX300NP))
+
+
+define Profile/MZK-EX750NP
+ NAME:=Planex MZK-EX750NP
+ PACKAGES:= kmod-mt76 kmod-mt7610e
+endef
+
+define Profile/MZK-EX750NP/Description
+ Package set optimized for the Planex MZK-EX750NP.
+endef
+$(eval $(call Profile,MZK-EX750NP))