aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-08-12 13:21:05 +0200
committerChuanhong Guo <gch981213@gmail.com>2019-09-07 21:41:44 +0800
commit6640e1c3681b4b9e7f0d8a57351b068ec40d3efd (patch)
treef8941092e050c66ad11f8a2b04077dc02a01b51a /target/linux/ramips
parentf11d90a76b719106336b94d85b166b4ebf19dbb0 (diff)
downloadupstream-6640e1c3681b4b9e7f0d8a57351b068ec40d3efd.tar.gz
upstream-6640e1c3681b4b9e7f0d8a57351b068ec40d3efd.tar.bz2
upstream-6640e1c3681b4b9e7f0d8a57351b068ec40d3efd.zip
ramips: clean and improve MAC address setup in 02_network
This patch removes unnecessary MAC address setup statements in ramips' 02_network by doing several optimizations: 1. For the following devices, lan_mac was set up with mtd_get_mac_binary although the same address was set in DTS. The lan_mac statement is removed in 02_network, but wan_mac is kept: - mercury,mac1200r-v2 - phicomm,k2g - skylab,skw92a - wiznet,wizfi630a 2. For the following devices, wan_mac was set up with mtd_get_mac_binary although the same address was set in DTS. The wan_mac statement is removed in 02_network, no lan_mac is present: - buffalo,whr-g300n - glinet,gl-mt300n-v2 - zyxel,keenetic-start 3. For the following device, lan_mac and wan_mac were set up with mtd_get_mac_binary to the same address as set in DTS. Both statements are removed in 02_network: - buffalo,whr-600d 4. For some devices, it was possible to move setup from 02_network to DTS by introducing previously missing mtd_mac_address: - buffalo,whr-1166d - buffalo,whr-300hp2 - buffalo,wsr-600dhp - ohyeah,oy-0001 - planex,vr500 5. For one device, mtd_mac_address was just wrong and overwritten by 02_network. Put the correct value in DTS and remove redundant statement in 02_network: - asus,rt-ac57u 6. For one device, MAC address defined in DTS is exchanged together with lan_mac/wan_mac setup in 02_network, so that cases in 02_network can be merged: - phicomm,k2p For some devices, an empty case has to be used to prevent them from falling into the default case and have WAN address = eth0 address + 1 set to them. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network43
-rw-r--r--target/linux/ramips/dts/mt7620a_buffalo_whr-1166d.dts2
-rw-r--r--target/linux/ramips/dts/mt7620a_buffalo_whr-300hp2.dts1
-rw-r--r--target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts1
-rw-r--r--target/linux/ramips/dts/mt7621_asus_rt-ac57u.dts2
-rw-r--r--target/linux/ramips/dts/mt7621_buffalo_wsr-600dhp.dts4
-rw-r--r--target/linux/ramips/dts/mt7621_netgear_r6220.dtsi2
-rw-r--r--target/linux/ramips/dts/mt7621_phicomm_k2p.dts2
-rw-r--r--target/linux/ramips/dts/mt7621_planex_vr500.dts4
9 files changed, 30 insertions, 31 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index e19a618389..a6b0177dde 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -513,7 +513,10 @@ ramips_setup_macs()
alfa-network,w502u|\
arcwireless,freestation5|\
cudy,wr1000|\
- netgear,wnce2001)
+ netgear,wnce2001|\
+ ohyeah,oy-0001|\
+ phicomm,k2g|\
+ skylab,skw92a)
wan_mac=$(mtd_get_mac_binary factory 0x2e)
;;
arcwireless,freestation5|\
@@ -535,9 +538,12 @@ ramips_setup_macs()
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
asus,rt-ac57u|\
+ elecom,wrc-1167ghbk2-s|\
+ elecom,wrc-1900gst|\
+ elecom,wrc-2533gst|\
phicomm,k2p|\
- planex,vr500)
- lan_mac=$(mtd_get_mac_binary factory 0xe000)
+ planex,vr500|\
+ samknows,whitebox-v8)
wan_mac=$(mtd_get_mac_binary factory 0xe006)
;;
asus,rt-n56u)
@@ -557,13 +563,11 @@ ramips_setup_macs()
buffalo,whr-1166d|\
buffalo,whr-300hp2|\
buffalo,whr-600d|\
- buffalo,wsr-600dhp)
- wan_mac=$(mtd_get_mac_binary factory 0x4)
- lan_mac=$wan_mac
- ;;
buffalo,whr-g300n|\
- glinet,gl-mt300n-v2)
- wan_mac=$(mtd_get_mac_binary factory 0x4)
+ buffalo,wsr-600dhp|\
+ glinet,gl-mt300n-v2|\
+ zyxel,keenetic-start)
+ # This empty case has to be kept for devices without any MAC address adjustments
;;
dlink,dch-m225|\
samsung,cy-swr1100)
@@ -600,12 +604,6 @@ ramips_setup_macs()
netgear,r6850)
wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
;;
- elecom,wrc-1167ghbk2-s|\
- elecom,wrc-1900gst|\
- elecom,wrc-2533gst|\
- samknows,whitebox-v8)
- wan_mac=$(mtd_get_mac_binary factory 0xe006)
- ;;
hiwifi,hc5661|\
hiwifi,hc5661a|\
hiwifi,hc5761|\
@@ -642,14 +640,7 @@ ramips_setup_macs()
lan_mac=$(mtd_get_mac_binary factory 0x2e)
;;
mercury,mac1200r-v2)
- lan_mac=$(mtd_get_mac_binary factory_info 0xd)
- wan_mac=$(macaddr_add "$lan_mac" 1)
- ;;
- ohyeah,oy-0001|\
- phicomm,k2g|\
- skylab,skw92a)
- lan_mac=$(mtd_get_mac_binary factory 0x28)
- wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1)
;;
poray,m3|\
poray,m4-4m|\
@@ -662,9 +653,9 @@ ramips_setup_macs()
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x8004)" 2)
;;
sparklan,wcr-150gn|\
+ wiznet,wizfi630a|\
zyxel,keenetic-omni|\
zyxel,keenetic-omni-ii|\
- zyxel,keenetic-start|\
zyxel,keenetic-viva)
wan_mac=$(mtd_get_mac_binary factory 0x28)
;;
@@ -674,10 +665,6 @@ ramips_setup_macs()
trendnet,tew-691gr)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 3)
;;
- wiznet,wizfi630a)
- lan_mac=$(mtd_get_mac_binary factory 0x4)
- wan_mac=$(mtd_get_mac_binary factory 0x28)
- ;;
xiaomi,mir3g|\
xiaomi,mir3p)
lan_mac=$(mtd_get_mac_binary factory 0xe006)
diff --git a/target/linux/ramips/dts/mt7620a_buffalo_whr-1166d.dts b/target/linux/ramips/dts/mt7620a_buffalo_whr-1166d.dts
index 9a6ca335a8..4be719a249 100644
--- a/target/linux/ramips/dts/mt7620a_buffalo_whr-1166d.dts
+++ b/target/linux/ramips/dts/mt7620a_buffalo_whr-1166d.dts
@@ -144,6 +144,8 @@
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+ mtd-mac-address = <&factory 0x4>;
+
port@5 {
status = "okay";
phy-handle = <&phy5>;
diff --git a/target/linux/ramips/dts/mt7620a_buffalo_whr-300hp2.dts b/target/linux/ramips/dts/mt7620a_buffalo_whr-300hp2.dts
index 8a79d6ab05..7dbc58fee7 100644
--- a/target/linux/ramips/dts/mt7620a_buffalo_whr-300hp2.dts
+++ b/target/linux/ramips/dts/mt7620a_buffalo_whr-300hp2.dts
@@ -143,6 +143,7 @@
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "llllw";
};
diff --git a/target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts b/target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts
index 6b93b8d089..a4fd86bbd6 100644
--- a/target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts
+++ b/target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts
@@ -106,6 +106,7 @@
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x28>;
mediatek,portmap = "llllw";
};
diff --git a/target/linux/ramips/dts/mt7621_asus_rt-ac57u.dts b/target/linux/ramips/dts/mt7621_asus_rt-ac57u.dts
index 8060fd9eaa..e589461a4d 100644
--- a/target/linux/ramips/dts/mt7621_asus_rt-ac57u.dts
+++ b/target/linux/ramips/dts/mt7621_asus_rt-ac57u.dts
@@ -135,7 +135,7 @@
};
&ethernet {
- mtd-mac-address = <&factory 0x4e000>;
+ mtd-mac-address = <&factory 0xe000>;
};
&pinctrl {
diff --git a/target/linux/ramips/dts/mt7621_buffalo_wsr-600dhp.dts b/target/linux/ramips/dts/mt7621_buffalo_wsr-600dhp.dts
index 6e7066d66c..3f20002fea 100644
--- a/target/linux/ramips/dts/mt7621_buffalo_wsr-600dhp.dts
+++ b/target/linux/ramips/dts/mt7621_buffalo_wsr-600dhp.dts
@@ -181,6 +181,10 @@
};
};
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
&xhci {
status = "disabled";
};
diff --git a/target/linux/ramips/dts/mt7621_netgear_r6220.dtsi b/target/linux/ramips/dts/mt7621_netgear_r6220.dtsi
index 17000a5bf2..a25a677d3b 100644
--- a/target/linux/ramips/dts/mt7621_netgear_r6220.dtsi
+++ b/target/linux/ramips/dts/mt7621_netgear_r6220.dtsi
@@ -107,7 +107,7 @@
};
&ethernet {
- mtd-mac-address = <&factory 0x00000004>;
+ mtd-mac-address = <&factory 0x4>;
};
&pinctrl {
diff --git a/target/linux/ramips/dts/mt7621_phicomm_k2p.dts b/target/linux/ramips/dts/mt7621_phicomm_k2p.dts
index a71e5f63b8..a2bac13c7b 100644
--- a/target/linux/ramips/dts/mt7621_phicomm_k2p.dts
+++ b/target/linux/ramips/dts/mt7621_phicomm_k2p.dts
@@ -109,7 +109,7 @@
};
&ethernet {
- mtd-mac-address = <&factory 0xe006>;
+ mtd-mac-address = <&factory 0xe000>;
};
&pinctrl {
diff --git a/target/linux/ramips/dts/mt7621_planex_vr500.dts b/target/linux/ramips/dts/mt7621_planex_vr500.dts
index 46980c4136..f0116944b1 100644
--- a/target/linux/ramips/dts/mt7621_planex_vr500.dts
+++ b/target/linux/ramips/dts/mt7621_planex_vr500.dts
@@ -81,6 +81,10 @@
};
};
+&ethernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
&pinctrl {
state_default: pinctrl0 {
gpio {