ralink: add 3.18 support

keep default as 3.14, mt7621 gic need to be ported to 3.18

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44349

1 files changed, 17 insertions, 13 deletions

diff --git a/target/linux/ramips/rt3883/config-3.14 b/target/linux/ramips/rt3883/config-default
index 00cddae9b2..c468c6b8c6 100644
--- a/target/linux/ramips/rt3883/config-3.14
+++ b/target/linux/ramips/rt3883/config-default
@@ -3,10 +3,12 @@ CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 CONFIG_ARCH_DISCARD_MEMBLOCK=y
 CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
 CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
 CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
@@ -25,10 +27,12 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_MIPS32_R1 is not set
 CONFIG_CPU_MIPS32_R2=y
 CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
 CONFIG_CPU_R4K_CACHE_TLB=y
 CONFIG_CPU_R4K_FPU=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
 CONFIG_CSRC_R4K=y
 CONFIG_DEBUG_PINCTRL=y
 CONFIG_DMA_NONCOHERENT=y
@@ -36,7 +40,6 @@ CONFIG_DMA_NONCOHERENT=y
 CONFIG_DTB_RT_NONE=y
 CONFIG_DTC=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_8250 is not set
 CONFIG_ETHERNET_PACKET_MANGLE=y
 CONFIG_GENERIC_ATOMIC64=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -44,8 +47,8 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_IO=y
 CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_NET_UTILS=y
 CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_DEVRES=y
@@ -54,12 +57,14 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_HARDWARE_WATCHPOINTS=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
+CONFIG_HAS_IOPORT_MAP=y
 # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
 CONFIG_HAVE_ARCH_JUMP_LABEL=y
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
 CONFIG_HAVE_CC_STACKPROTECTOR=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_CONTEXT_TRACKING=y
@@ -68,11 +73,11 @@ CONFIG_HAVE_DEBUG_KMEMLEAK=y
 CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
 CONFIG_HAVE_DMA_API_DEBUG=y
 CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_HAVE_IDE=y
 CONFIG_HAVE_KVM=y
@@ -94,31 +99,33 @@ CONFIG_IRQ_DOMAIN=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_INTC=y
 CONFIG_IRQ_WORK=y
+CONFIG_KERNFS=y
+CONFIG_LIBFDT=y
 CONFIG_MDIO_BOARDINFO=y
 CONFIG_MIPS=y
 # CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_O32_FP64_SUPPORT is not set
-# CONFIG_MLX5_CORE is not set
 CONFIG_MODULES_USE_ELF_REL=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NET_RALINK=y
 CONFIG_NET_RALINK_MDIO=y
 CONFIG_NET_RALINK_MDIO_RT2880=y
-CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_NET_RALINK_RT3883=y
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+# CONFIG_NO_IOPORT_MAP is not set
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
 CONFIG_OF_EARLY_FLATTREE=y
 CONFIG_OF_FLATTREE=y
 CONFIG_OF_GPIO=y
@@ -133,7 +140,7 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
-# CONFIG_PINCONF is not set
+CONFIG_PHY_RALINK_USB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_RT2880=y
 # CONFIG_PINCTRL_SINGLE is not set
@@ -141,7 +148,6 @@ CONFIG_PINCTRL_RT2880=y
 CONFIG_RALINK=y
 CONFIG_RALINK_USBPHY=y
 CONFIG_RALINK_WDT=y
-CONFIG_RA_NAT_NONE=y
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RTL8366_SMI=y
@@ -169,12 +175,10 @@ CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
 CONFIG_TICK_CPU_ACCOUNTING=y
-# CONFIG_USB_EHCI_HCD is not set
 CONFIG_USB_PHY=y
 CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
 CONFIG_USE_OF=y
 CONFIG_WATCHDOG_CORE=y
-# CONFIG_ZBUD is not set
 CONFIG_ZONE_DMA_FLAG=0