ramips: split base-files into subtargets

While most of the target's contents are split into subtargets, the
base-files are maintained for the target as a whole.

However, OpenWrt already implements a mechanism that will use (and
even prefer) files in the subtargets' directories. This can be
exploited to make several scripts subtarget-specific and thus save
some space.

In certain cases, keeping files in parent (=target) base-files was
more convenient, and thus no splitting was performed for those.

Note that this will increase overall code lines, but reduce code
per subtarget.

base-files ipk size reduction:
master (mt7621)   60958 B
split (mt7620)    46358 B (- 14.3 kiB)
split (mt7621)    48759 B (- 11.9 kiB)
split (mt76x8)    44948 B (- 15.6 kiB)
split (rt288x)    43508 B (- 17.0 kiB)
split (rt305x)    45616 B (- 15.0 kiB)
split (rt3883)    44176 B (- 16.4 kiB)

Run-tested on:
GL.iNet GL-MT300N-V2 (mt76x8)
D-Link DWR-116 (mt7620)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 228 insertions, 0 deletions

diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/02_network b/target/linux/ramips/rt305x/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..326bc8a3df
--- /dev/null
+++ b/target/linux/ramips/rt305x/base-files/etc/board.d/02_network
@@ -0,0 +1,228 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_rt3x5x_vlans()
+{
+	if [ ! -x /sbin/swconfig ]; then
+		# legacy default
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		return
+	fi
+	local wanports=""
+	local lanports=""
+	for port in 5 4 3 2 1 0; do
+		if [ "$(swconfig dev rt305x port $port get disable)" = "1" ]; then
+			continue
+		fi
+		if [ "$(swconfig dev rt305x port $port get lan)" = "0" ]; then
+			wanports="$port:wan $wanports"
+		else
+			lanports="$port:lan $lanports"
+		fi
+	done
+	ucidef_add_switch "rt305x" $lanports $wanports "6t@eth0"
+}
+
+ramips_setup_interfaces()
+{
+	local board="$1"
+
+	case $board in
+	accton,wr6202|\
+	alfa-network,w502u|\
+	netcore,nw718|\
+	petatel,psr-680w|\
+	skyline,sl-r7205|\
+	upvel,ur-336un)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		;;
+	allnet,all0256n-4m|\
+	allnet,all0256n-8m|\
+	allnet,all5002|\
+	allnet,all5003|\
+	dlink,dcs-930l-b1|\
+	dlink,dcs-930|\
+	hame,mpr-a2|\
+	hauppauge,broadway|\
+	hootoo,ht-tm02|\
+	intenso,memory2move|\
+	netgear,wnce2001|\
+	tenda,3g150b|\
+	tenda,3g300m|\
+	tenda,w150m|\
+	unbranded,a5-v11|\
+	wansview,ncs601w|\
+	zorlik,zl5900v2)
+		ucidef_add_switch "switch0"
+		ucidef_add_switch_attr "switch0" "enable" "false"
+		ucidef_set_interface_lan "eth0"
+		;;
+	alphanetworks,asl26555-8m|\
+	alphanetworks,asl26555-16m)
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
+		;;
+	argus,atp-52b|\
+	asiarf,awm002-evb-4m|\
+	asiarf,awm002-evb-8m|\
+	jcg,jhr-n805r|\
+	jcg,jhr-n825r|\
+	jcg,jhr-n926r|\
+	planex,mzk-wdpr|\
+	upvel,ur-326n4g)
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+		;;
+	asiarf,awapn2403)
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:wan" "6@eth0"
+		;;
+	asus,wl-330n|\
+	easyacc,wizard-8800)
+		ucidef_set_interface_lan "eth0.1"
+		;;
+	aximcom,mr-102n)
+		ucidef_set_interface_lan "eth0.2"
+		;;
+	belkin,f5d8235-v2|\
+	trendnet,tew-714tru)
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+		;;
+	buffalo,whr-g300n|\
+	dlink,dir-300-b7|\
+	dlink,dir-320-b1|\
+	dlink,dir-610-a1|\
+	edimax,3g-6200n|\
+	hilink,hlk-rm04|\
+	nixcore,x1-16m|\
+	nixcore,x1-8m|\
+	planex,mzk-w300nh2|\
+	zyxel,keenetic)
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
+		;;
+	dlink,dir-615-h1)
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
+		;;
+	huawei,d105)
+		ucidef_set_interface_lan "eth0"
+		;;
+	huawei,hg255d)
+		ucidef_add_switch "switch0" \
+			"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+		;;
+	nexx,wt1520-4m|\
+	nexx,wt1520-8m)
+		ucidef_add_switch "switch0" \
+			"0:lan" "4:wan" "6@eth0"
+		;;
+	planex,mzk-dp150n|\
+	vocore,vocore-8m|\
+	vocore,vocore-16m)
+		ucidef_add_switch "switch0" \
+			"0:lan" "4:lan" "6t@eth0"
+		;;
+	sitecom,wl-351)
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+		;;
+	sparklan,wcr-150gn)
+		ucidef_add_switch "switch0" \
+			"0:lan" "6t@eth0"
+		;;
+	trendnet,tew-638apb-v2)
+		ucidef_add_switch "switch0" \
+			"4:lan" "6@eth0"
+		;;
+	wiznet,wizfi630a)
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:wan" "6@eth0"
+		;;
+	zyxel,keenetic-start)
+		ucidef_add_switch "switch0" \
+			"0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6@eth0"
+		;;
+	*)
+		RT3X5X=$(grep -E "(RT3.5|RT5350)" /proc/cpuinfo)
+		if [ -n "${RT3X5X}" ]; then
+			ramips_setup_rt3x5x_vlans
+		else
+			ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		fi
+		;;
+	esac
+}
+
+ramips_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+
+	case $board in
+	8devices,carambola|\
+	alfa-network,w502u|\
+	arcwireless,freestation5|\
+	netgear,wnce2001)
+		wan_mac=$(mtd_get_mac_binary factory 0x2e)
+		;;
+	buffalo,whr-g300n|\
+	zyxel,keenetic-start)
+		# This empty case has to be kept for devices without any MAC address adjustments
+		;;
+	dlink,dir-300-b7|\
+	dlink,dir-320-b1|\
+	dlink,dir-620-a1|\
+	engenius,esr-9753|\
+	hame,mpr-a1|\
+	hauppauge,broadway|\
+	huawei,d105|\
+	hilink,hlk-rm04|\
+	nexaira,bc2|\
+	petatel,psr-680w|\
+	skyline,sl-r7205)
+		lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
+		wan_mac=$(macaddr_add "$lan_mac" 1)
+		;;
+	dlink,dir-615-d|\
+	dlink,dir-615-h1)
+		wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+		;;
+	poray,m3|\
+	poray,m4-4m|\
+	poray,m4-8m|\
+	poray,x5|\
+	poray,x8)
+		lan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" -2)
+		;;
+	sparklan,wcr-150gn|\
+	wiznet,wizfi630a)
+		wan_mac=$(mtd_get_mac_binary factory 0x28)
+		;;
+	tenda,w306r-v2)
+		wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 5)
+		;;
+	*)
+		wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0