aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/rt288x
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-10-22 12:37:13 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-11-03 00:26:17 +0100
commit19724e28c81e3ff642f09c49f612cd147c54a697 (patch)
tree278c45d3b1563cee6108e65c3b5856dbab304062 /target/linux/ramips/rt288x
parent0975c35b83a632f9662d1944307f87da9db06154 (diff)
downloadupstream-19724e28c81e3ff642f09c49f612cd147c54a697.tar.gz
upstream-19724e28c81e3ff642f09c49f612cd147c54a697.tar.bz2
upstream-19724e28c81e3ff642f09c49f612cd147c54a697.zip
ramips: split base-files into subtargets
While most of the target's contents are split into subtargets, the base-files are maintained for the target as a whole. However, OpenWrt already implements a mechanism that will use (and even prefer) files in the subtargets' directories. This can be exploited to make several scripts subtarget-specific and thus save some space. In certain cases, keeping files in parent (=target) base-files was more convenient, and thus no splitting was performed for those. Note that this will increase overall code lines, but reduce code per subtarget. base-files ipk size reduction: master (mt7621) 60958 B split (mt7620) 46358 B (- 14.3 kiB) split (mt7621) 48759 B (- 11.9 kiB) split (mt76x8) 44948 B (- 15.6 kiB) split (rt288x) 43508 B (- 17.0 kiB) split (rt305x) 45616 B (- 15.0 kiB) split (rt3883) 44176 B (- 16.4 kiB) Run-tested on: GL.iNet GL-MT300N-V2 (mt76x8) D-Link DWR-116 (mt7620) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/rt288x')
-rwxr-xr-xtarget/linux/ramips/rt288x/base-files/etc/board.d/01_leds34
-rwxr-xr-xtarget/linux/ramips/rt288x/base-files/etc/board.d/02_network61
-rwxr-xr-xtarget/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh20
3 files changed, 115 insertions, 0 deletions
diff --git a/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds b/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..a042ecfbda
--- /dev/null
+++ b/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds
@@ -0,0 +1,34 @@
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+airlink101,ar670w|\
+airlink101,ar725w)
+ set_wifi_led "rt2800soc-phy0::radio"
+ ;;
+belkin,f5d8235-v1)
+ set_wifi_led "$boardname:blue:wireless"
+ ;;
+ralink,v11st-fe)
+ set_wifi_led "rt2800pci-phy0::radio"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/rt288x/base-files/etc/board.d/02_network b/target/linux/ramips/rt288x/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..20b6f5317f
--- /dev/null
+++ b/target/linux/ramips/rt288x/base-files/etc/board.d/02_network
@@ -0,0 +1,61 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ airlink101,ar670w|\
+ airlink101,ar725w)
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
+ ;;
+ asus,rt-n15)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+ ;;
+ belkin,f5d8235-v1|\
+ buffalo,wzr-agl300nh|\
+ ralink,v11st-fe)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+ ;;
+ buffalo,wli-tx4-ag300n|\
+ dlink,dap-1522-a1)
+ ucidef_set_interface_lan "eth0"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh b/target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..786d57fc70
--- /dev/null
+++ b/target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}