diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-08-14 15:01:05 +0900 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-08-16 21:20:57 +0200 |
| commit | 9e6f22e30994a38b0af709956d66b8b05221afb2 (patch) | |
| tree | b6ae63c9ba4213adf5d32cde70f968b7585eecb1 /target/linux/ramips/patches-4.14/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch | |
| parent | c9e9a787343fb9190b5491188025bcfdebc94beb (diff) | |
| download | upstream-9e6f22e30994a38b0af709956d66b8b05221afb2.tar.gz upstream-9e6f22e30994a38b0af709956d66b8b05221afb2.tar.bz2 upstream-9e6f22e30994a38b0af709956d66b8b05221afb2.zip | |
ath79: add support for Buffalo WHR-G301N
Buffalo WHR-G301N is a 2.4 GHz 11n router, based on Atheros AR7240.
Ported from ar71xx target.
Specification:
- Atheros AR7240
- 32 MB of RAM
- 4 MB of Flash
- 2.4 GHz 2T2R wifi
- 5x 10/100 Mbps Ethernet
- 9x LEDs, 4x keys
- LED: 8x gpio-leds, 1x ath9k-leds
- key: 2x buttons, 1x slide switch
- UART header on PCB
- Vcc, GND, TX, RX from LEDs side
- 115200n8
Flash instruction using factory image:
1. Connect the computer to the LAN port of WHR-G301N
2. Connect power cable to WHR-G301N and turn on it
3. Access to "http://192.168.11.1/" and open firmware update page
("ファーム更新")
4. Select the OpenWrt factory image and click execute ("実行") button
5. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[fix the SUPPORTED_DEVICES to be compatible with the ar71xx image]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/patches-4.14/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch')
0 files changed, 0 insertions, 0 deletions