ralink: set v3.10 as default

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37497

1 files changed, 0 insertions, 978 deletions

diff --git a/target/linux/ramips/patches-3.9/0140-MIPS-ralink-DTS-file-updates.patch b/target/linux/ramips/patches-3.9/0140-MIPS-ralink-DTS-file-updates.patch
deleted file mode 100644
index a8152d6a58..0000000000
--- a/target/linux/ramips/patches-3.9/0140-MIPS-ralink-DTS-file-updates.patch
+++ /dev/null
@@ -1,978 +0,0 @@
-From cee339922876e924295c27e274923d1b381f5057 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 30 Apr 2013 17:27:46 +0200
-Subject: [PATCH 140/164] MIPS: ralink DTS file updates
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig                      |    8 +
- arch/mips/ralink/dts/Makefile                 |    2 +
- arch/mips/ralink/dts/mt7620a.dtsi             |  238 ++++++++++++++++++++++++-
- arch/mips/ralink/dts/mt7620a_eval.dts         |  111 ++++++++++++
- arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts |   99 ++++++++++
- arch/mips/ralink/dts/rt2880.dtsi              |   17 ++
- arch/mips/ralink/dts/rt2880_eval.dts          |    6 +
- arch/mips/ralink/dts/rt3050.dtsi              |   31 +++-
- arch/mips/ralink/dts/rt3052_eval.dts          |   19 +-
- arch/mips/ralink/dts/rt5350.dtsi              |  227 +++++++++++++++++++++++
- arch/mips/ralink/dts/rt5350_eval.dts          |   69 +++++++
- 11 files changed, 824 insertions(+), 3 deletions(-)
- create mode 100644 arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
- create mode 100644 arch/mips/ralink/dts/rt5350.dtsi
- create mode 100644 arch/mips/ralink/dts/rt5350_eval.dts
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -42,6 +42,10 @@ choice
- 		bool "RT305x eval kit"
- 		depends on SOC_RT305X
- 
-+	config DTB_RT5350_EVAL
-+		bool "RT5350 eval kit"
-+		depends on SOC_RT305X
-+
- 	config DTB_RT3883_EVAL
- 		bool "RT3883 eval kit"
- 		depends on SOC_RT3883
-@@ -50,6 +54,10 @@ choice
- 		bool "MT7620A eval kit"
- 		depends on SOC_MT7620
- 
-+	config DTB_MT7620A_MT7610E_EVAL
-+		bool "MT7620A + MT7610E eval kit"
-+		depends on SOC_MT7620
-+
- endchoice
- 
- endif
---- a/arch/mips/ralink/dts/Makefile
-+++ b/arch/mips/ralink/dts/Makefile
-@@ -1,4 +1,6 @@
- obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
- obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
-+obj-$(CONFIG_DTB_RT5350_EVAL) := rt5350_eval.dtb.o
- obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
- obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
-+obj-$(CONFIG_DTB_MT7620A_MT7610E_EVAL) := mt7620a_mt7610e_eval.dtb.o
---- a/arch/mips/ralink/dts/mt7620a.dtsi
-+++ b/arch/mips/ralink/dts/mt7620a.dtsi
-@@ -25,14 +25,36 @@
- 		#size-cells = <1>;
- 
- 		sysc@0 {
--			compatible = "ralink,mt7620a-sysc";
-+			compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
- 			reg = <0x0 0x100>;
- 		};
- 
-+		timer@100 {
-+			compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
-+			reg = <0x100 0x20>;
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <1>;
-+		};
-+
-+		watchdog@120 {
-+			compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
-+			reg = <0x120 0x10>;
-+
-+			resets = <&rstctrl 8>;
-+			reset-names = "wdt";
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <1>;
-+		};
-+
- 		intc: intc@200 {
- 			compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
- 			reg = <0x200 0x100>;
- 
-+			resets = <&rstctrl 19>;
-+			reset-names = "intc";
-+
- 			interrupt-controller;
- 			#interrupt-cells = <1>;
- 
-@@ -43,16 +65,230 @@
- 		memc@300 {
- 			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
- 			reg = <0x300 0x100>;
-+
-+			resets = <&rstctrl 20>;
-+			reset-names = "mc";
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <3>;
-+		};
-+
-+		uart@500 {
-+			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
-+			reg = <0x500 0x100>;
-+
-+			resets = <&rstctrl 12>;
-+			reset-names = "uart";
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <5>;
-+
-+			reg-shift = <2>;
-+
-+			status = "disabled";
-+		};
-+
-+		gpio0: gpio@600 {
-+			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
-+			reg = <0x600 0x34>;
-+
-+			resets = <&rstctrl 13>;
-+			reset-names = "pio";
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <6>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			ralink,gpio-base = <0>;
-+			ralink,num-gpios = <24>;
-+			ralink,register-map = [ 00 04 08 0c
-+						20 24 28 2c
-+						30 34 ];
-+
-+			status = "disabled";
-+		};
-+
-+		gpio1: gpio@638 {
-+			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
-+			reg = <0x638 0x24>;
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <6>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			ralink,gpio-base = <24>;
-+			ralink,num-gpios = <16>;
-+			ralink,register-map = [ 00 04 08 0c
-+						10 14 18 1c
-+						20 24 ];
-+
-+			status = "disabled";
-+		};
-+
-+		gpio2: gpio@660 {
-+			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
-+			reg = <0x660 0x24>;
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <6>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			ralink,gpio-base = <40>;
-+			ralink,num-gpios = <32>;
-+			ralink,register-map = [ 00 04 08 0c
-+						10 14 18 1c
-+						20 24 ];
-+
-+			status = "disabled";
-+		};
-+
-+		i2c@900 {
-+			compatible = "link,mt7620a-i2c", "ralink,rt2880-i2c";
-+			reg = <0x900 0x100>;
-+
-+			resets = <&rstctrl 16>;
-+			reset-names = "i2c";
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			status = "disabled";
-+		};
-+
-+		spi@b00 {
-+			compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
-+			reg = <0xb00 0x100>;
-+
-+			resets = <&rstctrl 18>;
-+			reset-names = "spi";
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			status = "disabled";
- 		};
- 
- 		uartlite@c00 {
- 			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
- 			reg = <0xc00 0x100>;
- 
-+			resets = <&rstctrl 19>;
-+			reset-names = "uartl";
-+
- 			interrupt-parent = <&intc>;
- 			interrupts = <12>;
- 
- 			reg-shift = <2>;
- 		};
-+
-+		systick@d00 {
-+			compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
-+			reg = <0xd00 0x10>;
-+
-+			resets = <&rstctrl 28>;
-+			reset-names = "intc";
-+
-+			interrupt-parent = <&cpuintc>;
-+			interrupts = <7>;
-+		};
-+
-+		gdma@2800 {
-+			compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
-+			reg = <0x2800 0x800>;
-+
-+			resets = <&rstctrl 14>;
-+			reset-names = "dma";
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <7>;
-+		};
-+	};
-+
-+	rstctrl: rstctrl {
-+		compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
-+		#reset-cells = <1>;
-+	};
-+
-+	ubsphy {
-+		compatible = "ralink,mt7620a-usbphy";
-+
-+		resets = <&rstctrl 22 &rstctrl 25>;
-+		reset-names = "host", "device";
-+	};
-+
-+	ethernet@10100000 {
-+		compatible = "ralink,mt7620a-eth";
-+		reg = <0x10100000 10000>;
-+
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		interrupt-parent = <&cpuintc>;
-+		interrupts = <5>;
-+
-+		status = "disabled";
-+	
-+		mdio-bus {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			status = "disabled";
-+		};
-+	};
-+
-+	gsw@10110000 {
-+		compatible = "ralink,mt7620a-gsw";
-+		reg = <0x10110000 8000>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <17>;
-+
-+		status = "disabled";
-+	};
-+
-+	sdhci@10130000 {
-+		compatible = "ralink,mt7620a-sdhci";
-+		reg = <0x10130000 4000>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <14>;
-+
-+		status = "disabled";
-+	};
-+
-+	ehci@101c0000 {
-+		compatible = "ralink,rt3xxx-ehci";
-+		reg = <0x101c0000 0x1000>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <18>;
-+	};
-+
-+	ohci@101c1000 {
-+		compatible = "ralink,rt3xxx-ohci";
-+		reg = <0x101c1000 0x1000>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <18>;
-+	};
-+
-+	pcie@10140000 {
-+		compatible = "ralink,mt7620a-pci";
-+		reg = <0x10140000 0x100
-+			0x10142000 0x100>;
-+
-+		resets = <&rstctrl 26>;
-+		reset-names = "pcie0";
-+
-+		interrupt-parent = <&cpuintc>;
-+		interrupts = <4>;
-+
-+		status = "disabled";
- 	};
- };
---- a/arch/mips/ralink/dts/mt7620a_eval.dts
-+++ b/arch/mips/ralink/dts/mt7620a_eval.dts
-@@ -13,4 +13,115 @@
- 	chosen {
- 		bootargs = "console=ttyS0,57600";
- 	};
-+
-+	palmbus@10000000 {
-+		sysc@0 {
-+			ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
-+			ralink,gpiomux = "i2c", "jtag";
-+			ralink,uartmux = "gpio";
-+			ralink,wdtmux = <1>;
-+		};
-+
-+		gpio0: gpio@600 {
-+			status = "okay";
-+		};
-+
-+		spi@b00 {
-+			status = "okay";
-+		
-+			m25p80@0 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "en25q64";
-+				reg = <0 0>;
-+				linux,modalias = "m25p80", "en25q64";
-+				spi-max-frequency = <10000000>;
-+
-+				partition@0 {
-+					label = "u-boot";
-+					reg = <0x0 0x30000>;
-+					read-only;
-+				};
-+
-+				partition@30000 {
-+					label = "u-boot-env";
-+					reg = <0x30000 0x10000>;
-+					read-only;
-+				};
-+
-+				factory: partition@40000 {
-+					label = "factory";
-+					reg = <0x40000 0x10000>;
-+					read-only;
-+				};
-+
-+				partition@50000 {
-+					label = "firmware";
-+					reg = <0x50000 0x7b0000>;
-+				};
-+			};
-+		};
-+	};
-+
-+	ethernet@10100000 {
-+		status = "okay";
-+		
-+		port@4 {
-+			compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
-+			reg = <4>;
-+			phy-mode = "rgmii";
-+			phy-handle = <&phy4>;
-+		};
-+
-+		port@5 {
-+			compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
-+			reg = <5>;
-+			phy-mode = "rgmii";
-+			phy-handle = <&phy5>;
-+		};
-+
-+		mdio-bus {
-+			status = "okay";
-+
-+			phy4: ethernet-phy@4 {
-+				reg = <4>;
-+				phy-mode = "rgmii";
-+			};
-+
-+			phy5: ethernet-phy@5 {
-+				reg = <5>;
-+				phy-mode = "rgmii";
-+			};
-+		};
-+	};
-+
-+	gsw@10110000 {
-+		status = "okay";
-+		ralink,port4 = "gmac";
-+	};
-+
-+	sdhci@10130000 {
-+		status = "okay";
-+	};
-+
-+	pcie@10140000 {
-+		status = "okay";
-+	};
-+
-+	gpio-keys-polled {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		poll-interval = <20>;
-+		s2 {
-+			label = "S2";
-+			gpios = <&gpio0 1 1>;
-+			linux,code = <0x100>;
-+		};
-+		s3 {
-+			label = "S3";
-+			gpios = <&gpio0 2 1>;
-+			linux,code = <0x101>;
-+		};
-+	};
- };
---- /dev/null
-+++ b/arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
-@@ -0,0 +1,99 @@
-+/dts-v1/;
-+
-+/include/ "mt7620a.dtsi"
-+
-+/ {
-+	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
-+	model = "Ralink MT7620A evaluation board";
-+
-+	memory@0 {
-+		reg = <0x0 0x2000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,57600";
-+	};
-+
-+	palmbus@10000000 {
-+		sysc@0 {
-+			ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
-+			ralink,gpiomux = "i2c", "jtag";
-+			ralink,uartmux = "gpio";
-+			ralink,wdtmux = <1>;
-+		};
-+
-+		gpio0: gpio@600 {
-+			status = "okay";
-+		};
-+
-+		spi@b00 {
-+			status = "okay";
-+		
-+			m25p80@0 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "en25q64";
-+				reg = <0 0>;
-+				linux,modalias = "m25p80", "en25q64";
-+				spi-max-frequency = <10000000>;
-+
-+				partition@0 {
-+					label = "u-boot";
-+					reg = <0x0 0x30000>;
-+					read-only;
-+				};
-+
-+				partition@30000 {
-+					label = "u-boot-env";
-+					reg = <0x30000 0x10000>;
-+					read-only;
-+				};
-+
-+				factory: partition@40000 {
-+					label = "factory";
-+					reg = <0x40000 0x10000>;
-+					read-only;
-+				};
-+
-+				partition@50000 {
-+					label = "firmware";
-+					reg = <0x50000 0x7b0000>;
-+				};
-+			};
-+		};
-+	};
-+
-+	ethernet@10100000 {
-+		status = "okay";
-+	};
-+
-+	gsw@10110000 {
-+		status = "okay";
-+		ralink,port4 = "ephy";
-+	};
-+
-+	sdhci@10130000 {
-+		status = "okay";
-+	};
-+
-+	pcie@10140000 {
-+		status = "okay";
-+	};
-+
-+	gpio-keys-polled {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		poll-interval = <20>;
-+		wps {
-+			label = "wps";
-+			gpios = <&gpio0 12 1>;
-+			linux,code = <0x100>;
-+		};
-+		reset {
-+			label = "reset";
-+			gpios = <&gpio0 13 1>;
-+			linux,code = <0x101>;
-+		};
-+	};
-+};
---- a/arch/mips/ralink/dts/rt2880.dtsi
-+++ b/arch/mips/ralink/dts/rt2880.dtsi
-@@ -55,4 +55,21 @@
- 			reg-shift = <2>;
- 		};
- 	};
-+
-+	ethernet@400000 {
-+		compatible = "ralink,rt2880-eth";
-+		reg = <0x00400000 10000>;
-+
-+		interrupt-parent = <&cpuintc>;
-+		interrupts = <5>;
-+
-+		status = "disabled";
-+
-+		mdio-bus {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			status = "disabled";
-+		};
-+	};
- };
---- a/arch/mips/ralink/dts/rt2880_eval.dts
-+++ b/arch/mips/ralink/dts/rt2880_eval.dts
-@@ -43,4 +43,10 @@
- 			reg = <0x50000 0x3b0000>;
- 		};
- 	};
-+
-+	ethernet@400000 {
-+		status = "okay";
-+
-+		ralink,fixed-link = <1000 1 1 1>;
-+	};
- };
---- a/arch/mips/ralink/dts/rt3050.dtsi
-+++ b/arch/mips/ralink/dts/rt3050.dtsi
-@@ -1,7 +1,7 @@
- / {
- 	#address-cells = <1>;
- 	#size-cells = <1>;
--	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
-+	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
- 
- 	cpus {
- 		cpu@0 {
-@@ -45,6 +45,15 @@
- 			reg = <0x300 0x100>;
- 		};
- 
-+		i2c@900 {
-+			compatible = "link,rt3052-i2c", "ralink,rt2880-i2c";
-+			reg = <0x900 0x100>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			status = "disabled";
-+		};
-+
- 		uartlite@c00 {
- 			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
- 			reg = <0xc00 0x100>;
-@@ -55,4 +64,24 @@
- 			reg-shift = <2>;
- 		};
- 	};
-+
-+	ethernet@10100000 {
-+		compatible = "ralink,rt3050-eth";
-+		reg = <0x10100000 10000>;
-+
-+		interrupt-parent = <&cpuintc>;
-+		interrupts = <5>;
-+
-+		status = "disabled";
-+	};
-+
-+	esw@10110000 {
-+		compatible = "ralink,rt3050-esw";
-+		reg = <0x10110000 8000>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <17>;
-+
-+		status = "disabled";
-+	};
- };
---- a/arch/mips/ralink/dts/rt3052_eval.dts
-+++ b/arch/mips/ralink/dts/rt3052_eval.dts
-@@ -3,7 +3,7 @@
- /include/ "rt3050.dtsi"
- 
- / {
--	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
-+	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc", "ralink,rt5350-soc";
- 	model = "Ralink RT3052 evaluation board";
- 
- 	memory@0 {
-@@ -14,6 +14,14 @@
- 		bootargs = "console=ttyS0,57600";
- 	};
- 
-+	palmbus@10000000 {
-+		sysc@0 {
-+			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-+			ralink,uartmux = "gpio";
-+			ralink,wdtmux = <1>;
-+		};
-+	};
-+
- 	cfi@1f000000 {
- 		compatible = "cfi-flash";
- 		reg = <0x1f000000 0x800000>;
-@@ -43,4 +51,13 @@
- 			reg = <0x50000 0x7b0000>;
- 		};
- 	};
-+
-+	ethernet@10100000 {
-+		status = "okay";
-+	};
-+
-+	esw@10110000 {
-+		status = "okay";
-+		ralink,portmap = <0x2f>;
-+	};
- };
---- /dev/null
-+++ b/arch/mips/ralink/dts/rt5350.dtsi
-@@ -0,0 +1,227 @@
-+/ {
-+	#address-cells = <1>;
-+	#size-cells = <1>;
-+	compatible = "ralink,rt5350-soc";
-+
-+	cpus {
-+		cpu@0 {
-+			compatible = "mips,mips24KEc";
-+		};
-+	};
-+
-+	cpuintc: cpuintc@0 {
-+		#address-cells = <0>;
-+		#interrupt-cells = <1>;
-+		interrupt-controller;
-+		compatible = "mti,cpu-interrupt-controller";
-+	};
-+
-+	palmbus@10000000 {
-+		compatible = "palmbus";
-+		reg = <0x10000000 0x200000>;
-+		ranges = <0x0 0x10000000 0x1FFFFF>;
-+
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		sysc@0 {
-+			compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
-+			reg = <0x0 0x100>;
-+		};
-+
-+		timer@100 {
-+			compatible = "ralink,rt5350-timer", "ralink,rt2880-timer";
-+			reg = <0x100 0x20>;
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <1>;
-+		};
-+
-+		watchdog@120 {
-+			compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
-+			reg = <0x120 0x10>;
-+
-+			resets = <&rstctrl 8>;
-+			reset-names = "wdt";
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <1>;
-+		};
-+
-+		intc: intc@200 {
-+			compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
-+			reg = <0x200 0x100>;
-+
-+			resets = <&rstctrl 19>;
-+			reset-names = "intc";
-+
-+			interrupt-controller;
-+			#interrupt-cells = <1>;
-+
-+			interrupt-parent = <&cpuintc>;
-+			interrupts = <2>;
-+		};
-+
-+		memc@300 {
-+			compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
-+			reg = <0x300 0x100>;
-+
-+			resets = <&rstctrl 20>;
-+			reset-names = "mc";
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <3>;
-+		};
-+
-+		uart@500 {
-+			compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
-+			reg = <0x500 0x100>;
-+
-+			resets = <&rstctrl 12>;
-+			reset-names = "uart";
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <5>;
-+
-+			reg-shift = <2>;
-+
-+			status = "disabled";
-+		};
-+
-+		gpio0: gpio@600 {
-+			compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
-+			reg = <0x600 0x34>;
-+
-+			resets = <&rstctrl 13>;
-+			reset-names = "pio";
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <6>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			ralink,gpio-base = <0>;
-+			ralink,num-gpios = <24>;
-+			ralink,register-map = [ 00 04 08 0c
-+						20 24 28 2c
-+						30 34 ];
-+
-+			status = "disabled";
-+		};
-+
-+		gpio1: gpio@638 {
-+			compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
-+			reg = <0x638 0x24>;
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <6>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			ralink,gpio-base = <24>;
-+			ralink,num-gpios = <16>;
-+			ralink,register-map = [ 00 04 08 0c
-+						10 14 18 1c
-+						20 24 ];
-+
-+			status = "disabled";
-+		};
-+
-+		i2c@900 {
-+			compatible = "link,rt5350-i2c", "ralink,rt2880-i2c";
-+			reg = <0x900 0x100>;
-+
-+			resets = <&rstctrl 16>;
-+			reset-names = "i2c";
-+
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			status = "disabled";
-+		};
-+
-+		spi@b00 {
-+			compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
-+			reg = <0xb00 0x100>;
-+
-+			resets = <&rstctrl 18>;
-+			reset-names = "spi";
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			status = "disabled";
-+		};
-+
-+		uartlite@c00 {
-+			compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
-+			reg = <0xc00 0x100>;
-+
-+			resets = <&rstctrl 19>;
-+			reset-names = "uartl";
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <12>;
-+
-+			reg-shift = <2>;
-+		};
-+
-+		systick@d00 {
-+			compatible = "ralink,rt5350-systick", "ralink,cevt-systick";
-+			reg = <0xd00 0x10>;
-+
-+			interrupt-parent = <&cpuintc>;
-+			interrupts = <7>;
-+		};
-+	};
-+
-+	rstctrl: rstctrl {
-+		compatible = "ralink,rt5350-reset", "ralink,rt2880-reset";
-+		#reset-cells = <1>;
-+	};
-+
-+	ubsphy {
-+		compatible = "ralink,rt3xxx-usbphy";
-+
-+		resets = <&rstctrl 22 &rstctrl 25>;
-+		reset-names = "host", "device";
-+	};
-+
-+	ethernet@10100000 {
-+		compatible = "ralink,rt5350-eth";
-+		reg = <0x10100000 10000>;
-+
-+		interrupt-parent = <&cpuintc>;
-+		interrupts = <5>;
-+
-+		status = "disabled";
-+	};
-+
-+	esw@10110000 {
-+		compatible = "ralink,rt3050-esw";
-+		reg = <0x10110000 8000>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <17>;
-+
-+		status = "disabled";
-+	};
-+
-+	ehci@101c0000 {
-+		compatible = "ralink,rt3xxx-ehci";
-+		reg = <0x101c0000 0x1000>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <18>;
-+	};
-+
-+	ohci@101c1000 {
-+		compatible = "ralink,rt3xxx-ohci";
-+		reg = <0x101c1000 0x1000>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <18>;
-+	};
-+};
---- /dev/null
-+++ b/arch/mips/ralink/dts/rt5350_eval.dts
-@@ -0,0 +1,69 @@
-+/dts-v1/;
-+
-+/include/ "rt5350.dtsi"
-+
-+/ {
-+	compatible = "ralink,rt5350-eval-board", "ralink,rt5350-soc";
-+	model = "Ralink RT5350 evaluation board";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,57600";
-+	};
-+
-+	palmbus@10000000 {
-+		sysc@0 {
-+			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-+			ralink,uartmux = "gpio";
-+			ralink,wdtmux = <1>;
-+		};
-+
-+		gpio0: gpio@600 {
-+			status = "okay";
-+		};
-+
-+		spi@b00 {
-+			status = "okay";
-+		
-+			m25p80@0 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "en25q64";
-+				reg = <0 0>;
-+				linux,modalias = "m25p80", "mx25l3205d";
-+				spi-max-frequency = <10000000>;
-+
-+				partition@0 {
-+					label = "u-boot";
-+					reg = <0x0 0x30000>;
-+					read-only;
-+				};
-+
-+				partition@30000 {
-+					label = "u-boot-env";
-+					reg = <0x30000 0x10000>;
-+					read-only;
-+				};
-+
-+				factory: partition@40000 {
-+					label = "factory";
-+					reg = <0x40000 0x10000>;
-+					read-only;
-+				};
-+
-+				partition@50000 {
-+					label = "firmware";
-+					reg = <0x50000 0x3b0000>;
-+				};
-+			};
-+		};
-+	};
-+
-+	ethernet@10100000 {
-+		status = "okay";
-+	};
-+
-+	esw@10110000 {
-+		status = "okay";
-+		ralink,portmap = <0x2f>;
-+	};
-+};