ralink: refresh patches

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39949

1 files changed, 0 insertions, 2409 deletions

diff --git a/target/linux/ramips/patches-3.10/0250-nand-7620.patch b/target/linux/ramips/patches-3.10/0250-nand-7620.patch
deleted file mode 100644
index 248e82c29e..0000000000
--- a/target/linux/ramips/patches-3.10/0250-nand-7620.patch
+++ /dev/null
@@ -1,2409 +0,0 @@
-From a5fc495c8dc199ffa997d43331693a5b7ee07270 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 17 Nov 2013 17:41:46 +0100
-Subject: [PATCH] ralink: add mt7620 nand driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/maps/Kconfig       |    4 +
- drivers/mtd/maps/Makefile      |    2 +
- drivers/mtd/maps/ralink_nand.c | 2136 ++++++++++++++++++++++++++++++++++++++++
- drivers/mtd/maps/ralink_nand.h |  232 +++++
- drivers/mtd/nand/Makefile      |    2 +-
- 5 files changed, 2375 insertions(+), 1 deletion(-)
- create mode 100644 drivers/mtd/maps/ralink_nand.c
- create mode 100644 drivers/mtd/maps/ralink_nand.h
-
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -424,4 +424,8 @@ config MTD_LATCH_ADDR
- 
-           If compiled as a module, it will be called latch-addr-flash.
- 
-+config MTD_NAND_MT7620
-+	tristate "Support for NAND on Mediatek MT7620"
-+	depends on RALINK && SOC_MT7620
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -46,3 +46,5 @@ obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
- obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
- obj-$(CONFIG_MTD_LATCH_ADDR)	+= latch-addr-flash.o
- obj-$(CONFIG_MTD_LANTIQ)	+= lantiq-flash.o
-+obj-$(CONFIG_MTD_NAND_MT7620)	+= ralink_nand.o
-+
---- /dev/null
-+++ b/drivers/mtd/maps/ralink_nand.c
-@@ -0,0 +1,2136 @@
-+#define DEBUG
-+#include <linux/device.h>
-+#undef DEBUG
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/mtd/partitions.h>
-+#include <asm/io.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+
-+#include "ralink_nand.h"
-+#ifdef RANDOM_GEN_BAD_BLOCK
-+#include <linux/random.h>
-+#endif
-+
-+#define LARGE_MTD_BOOT_PART_SIZE       (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_CONFIG_PART_SIZE     (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_FACTORY_PART_SIZE    (CFG_BLOCKSIZE<<1)
-+
-+
-+#define BLOCK_ALIGNED(a) ((a) & (CFG_BLOCKSIZE - 1))
-+
-+#define READ_STATUS_RETRY	1000
-+
-+struct mtd_info *ranfc_mtd = NULL;
-+
-+int skipbbt = 0;
-+int ranfc_debug = 1;
-+static int ranfc_bbt = 1;
-+#if defined (WORKAROUND_RX_BUF_OV)
-+static int ranfc_verify = 1;
-+#endif
-+static u32 nand_addrlen;
-+
-+#if 0
-+module_param(ranfc_debug, int, 0644);
-+module_param(ranfc_bbt, int, 0644);
-+module_param(ranfc_verify, int, 0644);
-+#endif
-+
-+#if 0
-+#define ra_dbg(args...) do { if (ranfc_debug) printk(args); } while(0)
-+#else
-+#define ra_dbg(args...)
-+#endif
-+
-+#define CLEAR_INT_STATUS()	ra_outl(NFC_INT_ST, ra_inl(NFC_INT_ST))
-+#define NFC_TRANS_DONE()	(ra_inl(NFC_INT_ST) & INT_ST_ND_DONE)
-+
-+int is_nand_page_2048 = 0;
-+const unsigned int nand_size_map[2][3] = {{25, 30, 30}, {20, 27, 30}};
-+
-+static int nfc_wait_ready(int snooze_ms);
-+
-+static const char * const mtk_probe_types[] = { "cmdlinepart", "ofpart", NULL };
-+
-+/**
-+ * reset nand chip
-+ */
-+static int nfc_chip_reset(void)
-+{
-+	int status;
-+
-+	//ra_dbg("%s:\n", __func__);
-+
-+	// reset nand flash
-+	ra_outl(NFC_CMD1, 0x0);
-+	ra_outl(NFC_CMD2, 0xff);
-+	ra_outl(NFC_ADDR, 0x0);
-+	ra_outl(NFC_CONF, 0x0411);
-+
-+	status = nfc_wait_ready(5);  //erase wait 5us
-+	if (status & NAND_STATUS_FAIL) {
-+		printk("%s: fail \n", __func__);
-+	}
-+	
-+	return (int)(status & NAND_STATUS_FAIL);
-+
-+}
-+
-+
-+
-+/** 
-+ * clear NFC and flash chip.
-+ */
-+static int nfc_all_reset(void)
-+{
-+	int retry;
-+
-+	ra_dbg("%s: \n", __func__);
-+
-+	// reset controller
-+	ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
-+	ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
-+
-+	CLEAR_INT_STATUS();
-+
-+	retry = READ_STATUS_RETRY;
-+	while ((ra_inl(NFC_INT_ST) & 0x02) != 0x02 && retry--);
-+	if (retry <= 0) {
-+		printk("nfc_all_reset: clean buffer fail \n");
-+		return -1;
-+	}
-+
-+	retry = READ_STATUS_RETRY;
-+	while ((ra_inl(NFC_STATUS) & 0x1) != 0x0 && retry--) { //fixme, controller is busy ?
-+		udelay(1);
-+	}
-+
-+	nfc_chip_reset();
-+
-+	return 0;
-+}
-+
-+/** NOTICE: only called by nfc_wait_ready().
-+ * @return -1, nfc can not get transction done 
-+ * @return 0, ok.
-+ */
-+static int _nfc_read_status(char *status)
-+{
-+	unsigned long cmd1, conf;
-+	int int_st, nfc_st;
-+	int retry;
-+
-+	cmd1 = 0x70;
-+	conf = 0x000101 | (1 << 20);
-+
-+	//fixme, should we check nfc status?
-+	CLEAR_INT_STATUS();
-+
-+	ra_outl(NFC_CMD1, cmd1); 	
-+	ra_outl(NFC_CONF, conf); 
-+
-+	/* FIXME, 
-+	 * 1. since we have no wired ready signal, directly 
-+	 * calling this function is not gurantee to read right status under ready state.
-+	 * 2. the other side, we can not determine how long to become ready, this timeout retry is nonsense.
-+	 * 3. SUGGESTION: call nfc_read_status() from nfc_wait_ready(),
-+	 * that is aware about caller (in sementics) and has snooze plused nfc ND_DONE.
-+	 */
-+	retry = READ_STATUS_RETRY; 
-+	do {
-+		nfc_st = ra_inl(NFC_STATUS);
-+		int_st = ra_inl(NFC_INT_ST);
-+		
-+		ndelay(10);
-+	} while (!(int_st & INT_ST_RX_BUF_RDY) && retry--);
-+
-+	if (!(int_st & INT_ST_RX_BUF_RDY)) {
-+		printk("nfc_read_status: NFC fail, int_st(%x), retry:%x. nfc:%x, reset nfc and flash. \n", 
-+		       int_st, retry, nfc_st);
-+		nfc_all_reset();
-+		*status = NAND_STATUS_FAIL;
-+		return -1;
-+	}
-+
-+	*status = (char)(le32_to_cpu(ra_inl(NFC_DATA)) & 0x0ff);
-+	return 0;
-+}
-+
-+/**
-+ * @return !0, chip protect.
-+ * @return 0, chip not protected.
-+ */
-+static int nfc_check_wp(void)
-+{
-+	/* Check the WP bit */
-+#if !defined CONFIG_NOT_SUPPORT_WP
-+	return !!(ra_inl(NFC_CTRL) & 0x01);
-+#else
-+	char result = 0;
-+	int ret;
-+
-+	ret = _nfc_read_status(&result);
-+	//FIXME, if ret < 0
-+
-+	return !(result & NAND_STATUS_WP);
-+#endif
-+}
-+
-+#if !defined CONFIG_NOT_SUPPORT_RB
-+/*
-+ * @return !0, chip ready.
-+ * @return 0, chip busy.
-+ */
-+static int nfc_device_ready(void)
-+{
-+	/* Check the ready  */
-+	return !!(ra_inl(NFC_STATUS) & 0x04);
-+}
-+#endif
-+
-+
-+/**
-+ * generic function to get data from flash.
-+ * @return data length reading from flash.
-+ */
-+static int _ra_nand_pull_data(char *buf, int len, int use_gdma)
-+{
-+#ifdef RW_DATA_BY_BYTE
-+	char *p = buf;
-+#else
-+	__u32 *p = (__u32 *)buf;
-+#endif
-+	int retry, int_st;
-+	unsigned int ret_data;
-+	int ret_size;
-+
-+	// receive data by use_gdma 
-+	if (use_gdma) { 
-+		//if (_ra_nand_dma_pull((unsigned long)p, len)) {
-+		if (1) {
-+			printk("%s: fail \n", __func__);
-+			len = -1; //return error
-+		}
-+
-+		return len;
-+	}
-+
-+	//fixme: retry count size?
-+	retry = READ_STATUS_RETRY;
-+	// no gdma
-+	while (len > 0) {
-+		int_st = ra_inl(NFC_INT_ST);
-+		if (int_st & INT_ST_RX_BUF_RDY) {
-+
-+			ret_data = ra_inl(NFC_DATA);
-+			ra_outl(NFC_INT_ST, INT_ST_RX_BUF_RDY); 
-+#ifdef RW_DATA_BY_BYTE
-+			ret_size = sizeof(unsigned int);
-+			ret_size = min(ret_size, len);
-+			len -= ret_size;
-+			while (ret_size-- > 0) {
-+				//nfc is little endian 
-+				*p++ = ret_data & 0x0ff;
-+				ret_data >>= 8; 
-+			}
-+#else
-+			ret_size = min(len, 4);
-+			len -= ret_size;
-+			if (ret_size == 4)
-+				*p++ = ret_data;
-+			else {
-+				__u8 *q = (__u8 *)p;
-+				while (ret_size-- > 0) {
-+					*q++ = ret_data & 0x0ff;
-+					ret_data >>= 8; 
-+				}
-+				p = (__u32 *)q;
-+			}
-+#endif
-+			retry = READ_STATUS_RETRY;
-+		}
-+		else if (int_st & INT_ST_ND_DONE) {
-+			break;
-+		}
-+		else {
-+			udelay(1);
-+			if (retry-- < 0) 
-+				break;
-+		}
-+	}
-+
-+#ifdef RW_DATA_BY_BYTE
-+	return (int)(p - buf);
-+#else
-+	return ((int)p - (int)buf);
-+#endif
-+}
-+
-+/**
-+ * generic function to put data into flash.
-+ * @return data length writing into flash.
-+ */
-+static int _ra_nand_push_data(char *buf, int len, int use_gdma)
-+{
-+#ifdef RW_DATA_BY_BYTE
-+	char *p = buf;
-+#else
-+	__u32 *p = (__u32 *)buf;
-+#endif
-+	int retry, int_st;
-+	unsigned int tx_data = 0;
-+	int tx_size, iter = 0;
-+
-+	// receive data by use_gdma 
-+	if (use_gdma) { 
-+		//if (_ra_nand_dma_push((unsigned long)p, len))
-+		if (1)
-+			len = 0;		
-+		printk("%s: fail \n", __func__);
-+		return len;
-+	}
-+
-+	// no gdma
-+	retry = READ_STATUS_RETRY;
-+	while (len > 0) {
-+		int_st = ra_inl(NFC_INT_ST);
-+		if (int_st & INT_ST_TX_BUF_RDY) {
-+#ifdef RW_DATA_BY_BYTE
-+			tx_size = min(len, (int)sizeof(unsigned long));
-+			for (iter = 0; iter < tx_size; iter++) {
-+				tx_data |= (*p++ << (8*iter));
-+			}
-+#else
-+			tx_size = min(len, 4);
-+			if (tx_size == 4)
-+				tx_data = (*p++);
-+			else {
-+				__u8 *q = (__u8 *)p;
-+				for (iter = 0; iter < tx_size; iter++)
-+					tx_data |= (*q++ << (8*iter));
-+				p = (__u32 *)q;
-+			}
-+#endif
-+			ra_outl(NFC_INT_ST, INT_ST_TX_BUF_RDY);
-+			ra_outl(NFC_DATA, tx_data);
-+			len -= tx_size;
-+			retry = READ_STATUS_RETRY;
-+		}
-+		else if (int_st & INT_ST_ND_DONE) {
-+			break;
-+		}
-+		else {
-+			udelay(1);
-+			if (retry-- < 0) {
-+				ra_dbg("%s p:%p buf:%p \n", __func__, p, buf);
-+				break;
-+			}
-+		}
-+	}
-+
-+	
-+#ifdef RW_DATA_BY_BYTE
-+	return (int)(p - buf);
-+#else
-+	return ((int)p - (int)buf);
-+#endif
-+
-+}
-+
-+static int nfc_select_chip(struct ra_nand_chip *ra, int chipnr)
-+{
-+#if (CONFIG_NUMCHIPS == 1)
-+	if (!(chipnr < CONFIG_NUMCHIPS))
-+		return -1;
-+	return 0;
-+#else
-+	BUG();
-+#endif
-+}
-+
-+/** @return -1: chip_select fail
-+ *	    0 : both CE and WP==0 are OK
-+ * 	    1 : CE OK and WP==1
-+ */
-+static int nfc_enable_chip(struct ra_nand_chip *ra, unsigned int offs, int read_only)
-+{
-+	int chipnr = offs >> ra->chip_shift;
-+
-+	ra_dbg("%s: offs:%x read_only:%x \n", __func__, offs, read_only);
-+
-+	chipnr = nfc_select_chip(ra, chipnr);
-+	if (chipnr < 0) {
-+		printk("%s: chip select error, offs(%x)\n", __func__, offs);
-+		return -1;
-+	}
-+
-+	if (!read_only)
-+		return nfc_check_wp();
-+	
-+	return 0;
-+}
-+
-+/** wait nand chip becomeing ready and return queried status.
-+ * @param snooze: sleep time in ms unit before polling device ready.
-+ * @return status of nand chip
-+ * @return NAN_STATUS_FAIL if something unexpected.
-+ */
-+static int nfc_wait_ready(int snooze_ms)
-+{
-+	int retry;
-+	char status;
-+
-+	// wait nfc idle,
-+	if (snooze_ms == 0)
-+		snooze_ms = 1;
-+	else
-+		schedule_timeout(snooze_ms * HZ / 1000);
-+	
-+	snooze_ms = retry = snooze_ms *1000000 / 100 ;  // ndelay(100)
-+
-+	while (!NFC_TRANS_DONE() && retry--) {
-+		if (!cond_resched())
-+			ndelay(100);
-+	}
-+	
-+	if (!NFC_TRANS_DONE()) {
-+		printk("nfc_wait_ready: no transaction done \n");
-+		return NAND_STATUS_FAIL;
-+	}
-+
-+#if !defined (CONFIG_NOT_SUPPORT_RB)
-+	//fixme
-+	while(!(status = nfc_device_ready()) && retry--) {
-+		ndelay(100);
-+	}
-+
-+	if (status == 0) {
-+		printk("nfc_wait_ready: no device ready. \n");	
-+		return NAND_STATUS_FAIL;
-+	}
-+
-+	_nfc_read_status(&status);
-+	return status;
-+#else
-+
-+	while(retry--) {
-+		_nfc_read_status(&status);
-+		if (status & NAND_STATUS_READY)
-+			break;
-+		ndelay(100);
-+	}
-+	if (retry<0)
-+		printk("nfc_wait_ready 2: no device ready, status(%x). \n", status);	
-+
-+	return status;
-+#endif
-+}
-+
-+/**
-+ * return 0: erase OK
-+ * return -EIO: fail 
-+ */
-+int nfc_erase_block(struct ra_nand_chip *ra, int row_addr)
-+{
-+	unsigned long cmd1, cmd2, bus_addr, conf;
-+	char status;
-+
-+	cmd1 = 0x60;
-+	cmd2 = 0xd0;
-+	bus_addr = row_addr;
-+	conf = 0x00511 | ((CFG_ROW_ADDR_CYCLE)<<16);
-+
-+	// set NFC
-+	ra_dbg("%s: cmd1: %lx, cmd2:%lx bus_addr: %lx, conf: %lx \n", 
-+	       __func__, cmd1, cmd2, bus_addr, conf);
-+
-+	//fixme, should we check nfc status?
-+	CLEAR_INT_STATUS();
-+
-+	ra_outl(NFC_CMD1, cmd1); 	
-+	ra_outl(NFC_CMD2, cmd2);
-+	ra_outl(NFC_ADDR, bus_addr);
-+	ra_outl(NFC_CONF, conf); 
-+
-+	status = nfc_wait_ready(3);  //erase wait 3ms 
-+	if (status & NAND_STATUS_FAIL) {
-+		printk("%s: fail \n", __func__);
-+		return -EIO;
-+	}
-+	
-+	return 0;
-+
-+}
-+
-+static inline int _nfc_read_raw_data(int cmd1, int cmd2, int bus_addr, int bus_addr2, int conf, char *buf, int len, int flags)
-+{
-+	int ret;
-+
-+	CLEAR_INT_STATUS();
-+	ra_outl(NFC_CMD1, cmd1); 	
-+	ra_outl(NFC_CMD2, cmd2);
-+	ra_outl(NFC_ADDR, bus_addr);
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+    defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)	
-+	ra_outl(NFC_ADDR2, bus_addr2);
-+#endif	
-+	ra_outl(NFC_CONF, conf); 
-+
-+	ret = _ra_nand_pull_data(buf, len, 0);
-+	if (ret != len) {
-+		ra_dbg("%s: ret:%x (%x) \n", __func__, ret, len);
-+		return NAND_STATUS_FAIL;
-+	}
-+
-+	//FIXME, this section is not necessary
-+	ret = nfc_wait_ready(0); //wait ready 
-+	/* to prevent the DATA FIFO 's old data from next operation */
-+	ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
-+	ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
-+
-+	if (ret & NAND_STATUS_FAIL) {
-+		printk("%s: fail \n", __func__);
-+		return NAND_STATUS_FAIL;
-+	}
-+
-+	return 0;
-+}
-+
-+static inline int _nfc_write_raw_data(int cmd1, int cmd3, int bus_addr, int bus_addr2, int conf, char *buf, int len, int flags)
-+{
-+	int ret;
-+
-+	CLEAR_INT_STATUS();
-+	ra_outl(NFC_CMD1, cmd1); 	
-+	ra_outl(NFC_CMD3, cmd3); 	
-+	ra_outl(NFC_ADDR, bus_addr);
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+    defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)	
-+	ra_outl(NFC_ADDR2, bus_addr2);
-+#endif	
-+	ra_outl(NFC_CONF, conf); 
-+
-+	ret = _ra_nand_push_data(buf, len, 0);
-+	if (ret != len) {
-+		ra_dbg("%s: ret:%x (%x) \n", __func__, ret, len);
-+		return NAND_STATUS_FAIL;
-+	}
-+
-+	ret = nfc_wait_ready(1); //write wait 1ms
-+	/* to prevent the DATA FIFO 's old data from next operation */
-+	ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
-+	ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
-+
-+	if (ret & NAND_STATUS_FAIL) {
-+		printk("%s: fail \n", __func__);
-+		return NAND_STATUS_FAIL;
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ * @return !0: fail
-+ * @return 0: OK
-+ */
-+int nfc_read_oob(struct ra_nand_chip *ra, int page, unsigned int offs, char *buf, int len, int flags)
-+{
-+	unsigned int cmd1 = 0, cmd2 = 0, conf = 0;
-+	unsigned int bus_addr = 0, bus_addr2 = 0;
-+	unsigned int ecc_en;
-+	int use_gdma;
-+	int status;
-+
-+	int pages_perblock = 1<<(ra->erase_shift - ra->page_shift);
-+	// constrain of nfc read function 
-+
-+#if defined (WORKAROUND_RX_BUF_OV)
-+	BUG_ON (len > 60); 	//problem of rx-buffer overrun 
-+#endif
-+	BUG_ON (offs >> ra->oob_shift); //page boundry
-+	BUG_ON ((unsigned int)(((offs + len) >> ra->oob_shift) + page) >
-+		((page + pages_perblock) & ~(pages_perblock-1))); //block boundry
-+
-+	use_gdma = flags & FLAG_USE_GDMA;
-+	ecc_en = flags & FLAG_ECC_EN;
-+	bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8) - 1));
-+
-+	if (is_nand_page_2048) {
-+		bus_addr += CFG_PAGESIZE;
-+		bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+		cmd1 = 0x0;
-+		cmd2 = 0x30;
-+		conf = 0x000511| ((CFG_ADDR_CYCLE)<<16) | (len << 20); 
-+	}
-+	else {
-+		cmd1 = 0x50;
-+		conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20); 
-+	}
-+	if (ecc_en) 
-+		conf |= (1<<3); 
-+	if (use_gdma)
-+		conf |= (1<<2);
-+
-+	ra_dbg("%s: cmd1:%x, bus_addr:%x, conf:%x, len:%x, flag:%x\n",
-+	       __func__, cmd1, bus_addr, conf, len, flags);
-+
-+	status = _nfc_read_raw_data(cmd1, cmd2, bus_addr, bus_addr2, conf, buf, len, flags);
-+	if (status & NAND_STATUS_FAIL) {
-+		printk("%s: fail\n", __func__);
-+		return -EIO;
-+	}
-+
-+	return 0; 
-+}
-+
-+/**
-+ * @return !0: fail
-+ * @return 0: OK
-+ */
-+int nfc_write_oob(struct ra_nand_chip *ra, int page, unsigned int offs, char *buf, int len, int flags)
-+{
-+	unsigned int cmd1 = 0, cmd3=0, conf = 0;
-+	unsigned int bus_addr = 0, bus_addr2 = 0;
-+	int use_gdma;
-+	int status;
-+
-+	int pages_perblock = 1<<(ra->erase_shift - ra->page_shift);
-+	// constrain of nfc read function 
-+
-+	BUG_ON (offs >> ra->oob_shift); //page boundry
-+	BUG_ON ((unsigned int)(((offs + len) >> ra->oob_shift) + page) >
-+		((page + pages_perblock) & ~(pages_perblock-1))); //block boundry 
-+
-+	use_gdma = flags & FLAG_USE_GDMA;
-+	bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8) - 1));
-+
-+	if (is_nand_page_2048) {
-+		cmd1 = 0x80;
-+		cmd3 = 0x10;
-+		bus_addr += CFG_PAGESIZE;
-+		bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+		conf = 0x001123 | ((CFG_ADDR_CYCLE)<<16) | ((len) << 20);
-+	}
-+	else {
-+		cmd1 = 0x08050;
-+		cmd3 = 0x10;
-+		conf = 0x001223 | ((CFG_ADDR_CYCLE)<<16) | ((len) << 20); 
-+	}
-+	if (use_gdma)
-+		conf |= (1<<2);
-+
-+	// set NFC
-+	ra_dbg("%s: cmd1: %x, cmd3: %x bus_addr: %x, conf: %x, len:%x\n", 
-+	       __func__, cmd1, cmd3, bus_addr, conf, len);
-+
-+	status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, len, flags);
-+	if (status & NAND_STATUS_FAIL) {
-+		printk("%s: fail \n", __func__);
-+		return -EIO;
-+	}
-+
-+	return 0; 
-+}
-+
-+
-+int nfc_read_page(struct ra_nand_chip *ra, char *buf, int page, int flags);
-+int nfc_write_page(struct ra_nand_chip *ra, char *buf, int page, int flags);
-+
-+
-+#if !defined (WORKAROUND_RX_BUF_OV)	
-+static int one_bit_correction(char *ecc, char *expected, int *bytes, int *bits);
-+int nfc_ecc_verify(struct ra_nand_chip *ra, char *buf, int page, int mode)
-+{
-+	int ret, i;
-+	char *p, *e;
-+	int ecc;
-+	
-+	//ra_dbg("%s, page:%x mode:%d\n", __func__, page, mode);
-+
-+	if (mode == FL_WRITING) {
-+		int len = CFG_PAGESIZE + CFG_PAGE_OOBSIZE;
-+		int conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20); 
-+		conf |= (1<<3); //(ecc_en) 
-+		//conf |= (1<<2); // (use_gdma)
-+
-+		p = ra->readback_buffers;
-+		ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_ECC_EN); 
-+		if (ret == 0) 
-+			goto ecc_check;
-+		
-+		//FIXME, double comfirm
-+		printk("%s: read back fail, try again \n",__func__);
-+		ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_ECC_EN); 
-+		if (ret != 0) {
-+			printk("\t%s: read back fail agian \n",__func__);
-+			goto bad_block;
-+		}
-+	}
-+	else if (mode == FL_READING) {
-+		p = buf;
-+	}	
-+	else
-+		return -2;
-+
-+ecc_check:
-+	p += CFG_PAGESIZE;
-+	if (!is_nand_page_2048) {
-+		ecc = ra_inl(NFC_ECC); 
-+		if (ecc == 0) //clean page.
-+			return 0;
-+		e = (char*)&ecc;
-+		for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+			int eccpos = CONFIG_ECC_OFFSET + i;
-+			if (*(p + eccpos) != (char)0xff)
-+				break;
-+			if (i == CONFIG_ECC_BYTES - 1) {
-+				printk("skip ecc 0xff at page %x\n", page);
-+				return 0;
-+			}
-+		}
-+		for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+			int eccpos = CONFIG_ECC_OFFSET + i;
-+			if (*(p + eccpos) != *(e + i)) {
-+				printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, ecc:%x \n",
-+						__func__, (mode == FL_READING)?"read":"write", page,	
-+						*(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
-+				return -1;
-+			}
-+		}
-+	}
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+    defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)	
-+	else {
-+		int ecc2, ecc3, ecc4, qsz;
-+		char *e2, *e3, *e4;
-+		int correction_flag = 0;
-+		ecc = ra_inl(NFC_ECC_P1);
-+		ecc2 = ra_inl(NFC_ECC_P2);
-+		ecc3 = ra_inl(NFC_ECC_P3);
-+		ecc4 = ra_inl(NFC_ECC_P4);
-+		e = (char*)&ecc;
-+		e2 = (char*)&ecc2;
-+		e3 = (char*)&ecc3;
-+		e4 = (char*)&ecc4;
-+		qsz = CFG_PAGE_OOBSIZE / 4;
-+		if (ecc == 0 && ecc2 == 0 && ecc3 == 0 && ecc4 == 0)
-+			return 0;
-+		for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+			int eccpos = CONFIG_ECC_OFFSET + i;
-+			if (*(p + eccpos) != (char)0xff)
-+				break;
-+			else if (*(p + eccpos + qsz) != (char)0xff)
-+				break;
-+			else if (*(p + eccpos + qsz*2) != (char)0xff)
-+				break;
-+			else if (*(p + eccpos + qsz*3) != (char)0xff)
-+				break;
-+			if (i == CONFIG_ECC_BYTES - 1) {
-+				printk("skip ecc 0xff at page %x\n", page);
-+				return 0;
-+			}
-+		}
-+		for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+			int eccpos = CONFIG_ECC_OFFSET + i;
-+			if (*(p + eccpos) != *(e + i)) {
-+				printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, ecc:%x \n",
-+						__func__, (mode == FL_READING)?"read":"write", page,
-+						*(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
-+				correction_flag |= 0x1;
-+			}
-+			if (*(p + eccpos + qsz) != *(e2 + i)) {
-+				printk("%s mode:%s, invalid ecc2, page: %x read:%x %x %x, ecc2:%x \n",
-+						__func__, (mode == FL_READING)?"read":"write", page,
-+						*(p+CONFIG_ECC_OFFSET+qsz), *(p+ CONFIG_ECC_OFFSET+1+qsz), *(p+ CONFIG_ECC_OFFSET+2+qsz), ecc2);
-+				correction_flag |= 0x2;
-+			}
-+			if (*(p + eccpos + qsz*2) != *(e3 + i)) {
-+				printk("%s mode:%s, invalid ecc3, page: %x read:%x %x %x, ecc3:%x \n",
-+						__func__, (mode == FL_READING)?"read":"write", page,
-+						*(p+CONFIG_ECC_OFFSET+qsz*2), *(p+ CONFIG_ECC_OFFSET+1+qsz*2), *(p+ CONFIG_ECC_OFFSET+2+qsz*2), ecc3);
-+				correction_flag |= 0x4;
-+			}
-+			if (*(p + eccpos + qsz*3) != *(e4 + i)) {
-+				printk("%s mode:%s, invalid ecc4, page: %x read:%x %x %x, ecc4:%x \n",
-+						__func__, (mode == FL_READING)?"read":"write", page,
-+						*(p+CONFIG_ECC_OFFSET+qsz*3), *(p+ CONFIG_ECC_OFFSET+1+qsz*3), *(p+ CONFIG_ECC_OFFSET+2+qsz*3), ecc4);
-+				correction_flag |= 0x8;
-+			}
-+		}
-+
-+		if (correction_flag)
-+		{
-+			printk("trying to do correction!\n");
-+			if (correction_flag & 0x1)
-+			{
-+				int bytes, bits;
-+				char *pBuf = p - CFG_PAGESIZE;
-+			
-+				if (one_bit_correction(p + CONFIG_ECC_OFFSET, e, &bytes, &bits) == 0)
-+				{
-+					pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+					printk("1. correct byte %d, bit %d!\n", bytes, bits);
-+				}
-+				else
-+				{
-+					printk("failed to correct!\n");
-+					return -1;
-+				}
-+			}
-+
-+			if (correction_flag & 0x2)
-+			{
-+				int bytes, bits;
-+				char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE/4;
-+			
-+				if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz), e2, &bytes, &bits) == 0)
-+				{
-+					pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+					printk("2. correct byte %d, bit %d!\n", bytes, bits);
-+				}
-+				else
-+				{
-+					printk("failed to correct!\n");
-+					return -1;
-+				}
-+			}
-+			if (correction_flag & 0x4)
-+			{
-+				int bytes, bits;
-+				char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE/2;
-+			
-+				if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz * 2), e3, &bytes, &bits) == 0)
-+				{
-+					pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+					printk("3. correct byte %d, bit %d!\n", bytes, bits);
-+				}
-+				else
-+				{
-+					printk("failed to correct!\n");
-+					return -1;
-+				}
-+			}
-+			if (correction_flag & 0x8)
-+			{
-+				int bytes, bits;
-+				char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE*3/4;
-+			
-+				if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz * 3), e4, &bytes, &bits) == 0)
-+				{
-+					pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+					printk("4. correct byte %d, bit %d!\n", bytes, bits);
-+				}
-+				else
-+				{
-+					printk("failed to correct!\n");
-+					return -1;
-+				}
-+			}
-+		}
-+
-+	}
-+#endif	
-+	return 0;
-+
-+bad_block:
-+	return -1;
-+}
-+
-+#else
-+
-+void ranfc_dump(void) 
-+{	
-+	int i;
-+	for (i=0; i<11; i++) {
-+		if (i==6) 
-+			continue;
-+		printk("%x: %x \n", NFC_BASE + i*4, ra_inl(NFC_BASE + i*4));
-+	}
-+}
-+
-+/**
-+ * @return 0, ecc OK or corrected.
-+ * @return NAND_STATUS_FAIL, ecc fail.   
-+ */
-+
-+int nfc_ecc_verify(struct ra_nand_chip *ra, char *buf, int page, int mode)
-+{
-+	int ret, i;
-+	char *p, *e;
-+	int ecc;
-+	
-+	if (ranfc_verify == 0)
-+		return 0;
-+
-+	ra_dbg("%s, page:%x mode:%d\n", __func__, page, mode);
-+
-+	if (mode == FL_WRITING) { // read back and memcmp
-+		ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_NONE); 
-+		if (ret != 0) //double comfirm
-+			ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_NONE); 
-+
-+		if (ret != 0) {
-+			printk("%s: mode:%x read back fail \n", __func__, mode);
-+			return -1;
-+		}
-+		return memcmp(buf, ra->readback_buffers, 1<<ra->page_shift);
-+	}
-+	
-+	if (mode == FL_READING) { 
-+#if 0
-+		if (ra->sandbox_page == 0)
-+			return 0;
-+
-+		ret = nfc_write_page(ra, buf, ra->sandbox_page, FLAG_USE_GDMA | FLAG_ECC_EN);
-+		if (ret != 0) {
-+			printk("%s, fail write sandbox_page \n", __func__);
-+			return -1;
-+		}
-+#else
-+		/** @note: 
-+		 * The following command is actually not 'write' command to drive NFC to write flash.
-+		 * However, it can make NFC to calculate ECC, that will be used to compare with original ones.
-+		 * --YT
-+		 */
-+		unsigned int conf = 0x001223| (CFG_ADDR_CYCLE<<16) | (0x200 << 20) | (1<<3) | (1<<2); 
-+		_nfc_write_raw_data(0xff, 0xff, ra->sandbox_page<<ra->page_shift, conf, buf, 0x200, FLAG_USE_GDMA);
-+#endif
-+
-+		ecc = ra_inl(NFC_ECC); 
-+		if (ecc == 0) //clean page.
-+			return 0;
-+		e = (char*)&ecc;
-+		p = buf + (1<<ra->page_shift);
-+		for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+			int eccpos = CONFIG_ECC_OFFSET + i;
-+			if (*(p + eccpos) != *(e + i)) {
-+				printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, write:%x \n",
-+				       __func__, (mode == FL_READING)?"read":"write", page,	
-+				       *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
-+
-+				for (i=0; i<528; i++)
-+					printk("%-2x \n", *(buf + i));
-+				return -1;
-+			}
-+		}
-+		return 0;
-+	}
-+
-+	return -1;
-+
-+}
-+
-+#endif
-+
-+
-+/**
-+ * @return -EIO, writing size is less than a page 
-+ * @return 0, OK
-+ */
-+int nfc_read_page(struct ra_nand_chip *ra, char *buf, int page, int flags)
-+{
-+	unsigned int cmd1 = 0, cmd2 = 0, conf = 0;
-+	unsigned int bus_addr = 0, bus_addr2 = 0;
-+	unsigned int ecc_en;
-+	int use_gdma;
-+	int size, offs;
-+	int status = 0;
-+
-+	use_gdma = flags & FLAG_USE_GDMA;
-+	ecc_en = flags & FLAG_ECC_EN;
-+
-+	page = page & (CFG_CHIPSIZE - 1); // chip boundary
-+	size = CFG_PAGESIZE + CFG_PAGE_OOBSIZE; //add oobsize
-+	offs = 0;
-+
-+	while (size > 0) {
-+		int len;
-+#if defined (WORKAROUND_RX_BUF_OV)
-+		len = min(60, size);
-+#else
-+		len = size;
-+#endif		
-+		bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8)-1)); 
-+		if (is_nand_page_2048) {
-+			bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+			cmd1 = 0x0;
-+			cmd2 = 0x30;
-+			conf = 0x000511| ((CFG_ADDR_CYCLE)<<16) | (len << 20); 
-+		}
-+		else {
-+			if (offs & ~(CFG_PAGESIZE-1))
-+				cmd1 = 0x50;
-+			else if (offs & ~((1<<CFG_COLUMN_ADDR_CYCLE*8)-1))
-+				cmd1 = 0x01;
-+			else
-+				cmd1 = 0;
-+
-+			conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20); 
-+		}
-+#if !defined (WORKAROUND_RX_BUF_OV)
-+		if (ecc_en) 
-+			conf |= (1<<3); 
-+#endif
-+		if (use_gdma)
-+			conf |= (1<<2);
-+
-+		status = _nfc_read_raw_data(cmd1, cmd2, bus_addr, bus_addr2, conf, buf+offs, len, flags);
-+		if (status & NAND_STATUS_FAIL) {
-+			printk("%s: fail \n", __func__);
-+			return -EIO;
-+		}
-+
-+		offs += len;
-+		size -= len;
-+	}
-+
-+	// verify and correct ecc
-+	if ((flags & (FLAG_VERIFY | FLAG_ECC_EN)) == (FLAG_VERIFY | FLAG_ECC_EN)) {
-+		status = nfc_ecc_verify(ra, buf, page, FL_READING);	
-+		if (status != 0) {
-+			printk("%s: fail, buf:%x, page:%x, flag:%x\n", 
-+			       __func__, (unsigned int)buf, page, flags);
-+			return -EBADMSG;
-+		}
-+	}
-+	else {
-+		// fix,e not yet support
-+		ra->buffers_page = -1; //cached
-+	}
-+
-+	return 0;
-+}
-+
-+
-+/** 
-+ * @return -EIO, fail to write
-+ * @return 0, OK
-+ */
-+int nfc_write_page(struct ra_nand_chip *ra, char *buf, int page, int flags)
-+{
-+	unsigned int cmd1 = 0, cmd3, conf = 0;
-+	unsigned int bus_addr = 0, bus_addr2 = 0;
-+	unsigned int ecc_en;
-+	int use_gdma;
-+	int size;
-+	char status;
-+	uint8_t *oob = buf + (1<<ra->page_shift);
-+
-+	use_gdma = flags & FLAG_USE_GDMA;
-+	ecc_en = flags & FLAG_ECC_EN;
-+
-+	oob[ra->badblockpos] = 0xff;	//tag as good block.
-+	ra->buffers_page = -1; //cached
-+
-+	page = page & (CFG_CHIPSIZE-1); //chip boundary
-+	size = CFG_PAGESIZE + CFG_PAGE_OOBSIZE; //add oobsize
-+	bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)); //write_page always write from offset 0.
-+
-+	if (is_nand_page_2048) {
-+	bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+		cmd1 = 0x80;
-+		cmd3 = 0x10;
-+		conf = 0x001123| ((CFG_ADDR_CYCLE)<<16) | (size << 20); 
-+	}
-+	else {
-+	cmd1 = 0x8000;
-+	cmd3 = 0x10;
-+	conf = 0x001223| ((CFG_ADDR_CYCLE)<<16) | (size << 20); 
-+}
-+	if (ecc_en) 
-+		conf |= (1<<3); //enable ecc
-+	if (use_gdma)
-+		conf |= (1<<2);
-+
-+	// set NFC
-+	ra_dbg("nfc_write_page: cmd1: %x, cmd3: %x bus_addr: %x, conf: %x, len:%x\n", 
-+	       cmd1, cmd3, bus_addr, conf, size);
-+
-+	status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, size, flags);
-+	if (status & NAND_STATUS_FAIL) {
-+		printk("%s: fail \n", __func__);
-+		return -EIO;
-+	}
-+	
-+
-+	if (flags & FLAG_VERIFY) { // verify and correct ecc
-+		status = nfc_ecc_verify(ra, buf, page, FL_WRITING);
-+
-+#ifdef RANDOM_GEN_BAD_BLOCK
-+		if (((random32() & 0x1ff) == 0x0) && (page >= 0x100)) // randomly create bad block
-+		{
-+			printk("hmm... create a bad block at page %x\n", (bus_addr >> 16));
-+			status = -1;
-+		}
-+#endif
-+
-+		if (status != 0) {
-+			printk("%s: ecc_verify fail: ret:%x \n", __func__, status);
-+			oob[ra->badblockpos] = 0x33; 
-+			page -= page % (CFG_BLOCKSIZE/CFG_PAGESIZE);
-+			printk("create a bad block at page %x\n", page);
-+			if (!is_nand_page_2048)
-+				status = nfc_write_oob(ra, page, ra->badblockpos, oob+ra->badblockpos, 1, flags);
-+			else
-+			{
-+				status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, size, flags);
-+				nfc_write_oob(ra, page, 0, oob, 16, FLAG_NONE);
-+			}
-+			return -EBADMSG;
-+		}
-+	}
-+
-+
-+	ra->buffers_page = page; //cached
-+	return 0;
-+}
-+
-+
-+
-+/*************************************************************
-+ * nand internal process 
-+ *************************************************************/
-+
-+/**
-+ * nand_release_device - [GENERIC] release chip
-+ * @mtd:	MTD device structure
-+ *
-+ * Deselect, release chip lock and wake up anyone waiting on the device
-+ */
-+static void nand_release_device(struct ra_nand_chip *ra)
-+{
-+	/* De-select the NAND device */
-+	nfc_select_chip(ra, -1);
-+
-+	/* Release the controller and the chip */
-+	ra->state = FL_READY;
-+
-+	mutex_unlock(ra->controller);
-+}
-+
-+/**
-+ * nand_get_device - [GENERIC] Get chip for selected access
-+ * @chip:	the nand chip descriptor
-+ * @mtd:	MTD device structure
-+ * @new_state:	the state which is requested
-+ *
-+ * Get the device and lock it for exclusive access
-+ */
-+static int
-+nand_get_device(struct ra_nand_chip *ra, int new_state)
-+{
-+	int ret = 0;
-+
-+	ret = mutex_lock_interruptible(ra->controller);
-+	if (!ret) 
-+		ra->state = new_state;
-+
-+	return ret;
-+
-+}
-+
-+
-+
-+/*************************************************************
-+ * nand internal process 
-+ *************************************************************/
-+
-+int nand_bbt_get(struct ra_nand_chip *ra, int block)
-+{
-+	int byte, bits;
-+	bits = block * BBTTAG_BITS;
-+
-+	byte = bits / 8;
-+	bits = bits % 8;
-+	
-+	return (ra->bbt[byte] >> bits) & BBTTAG_BITS_MASK;
-+}
-+
-+int nand_bbt_set(struct ra_nand_chip *ra, int block, int tag)
-+{
-+	int byte, bits;
-+	bits = block * BBTTAG_BITS;
-+
-+	byte = bits / 8;
-+	bits = bits % 8;
-+
-+	// If previous tag is bad, dont overwrite it	
-+	if (((ra->bbt[byte] >> bits) & BBTTAG_BITS_MASK) == BBT_TAG_BAD)
-+	{
-+		return BBT_TAG_BAD;
-+	}
-+
-+	ra->bbt[byte] = (ra->bbt[byte] & ~(BBTTAG_BITS_MASK << bits)) | ((tag & BBTTAG_BITS_MASK) << bits);
-+		
-+	return tag;
-+}
-+
-+/**
-+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
-+ * @mtd:	MTD device structure
-+ * @ofs:	offset from device start
-+ *
-+ * Check, if the block is bad. Either by reading the bad block table or
-+ * calling of the scan function.
-+ */
-+int nand_block_checkbad(struct ra_nand_chip *ra, loff_t offs)
-+{
-+	int page, block;
-+	int ret = 4;
-+	unsigned int tag;
-+	char *str[]= {"UNK", "RES", "BAD", "GOOD"};
-+
-+	if (ranfc_bbt == 0)
-+		return 0;
-+
-+	{
-+		// align with chip
-+
-+		offs = offs & ((1<<ra->chip_shift) -1);
-+
-+		page = offs >> ra->page_shift;
-+		block = offs >> ra->erase_shift;
-+	}
-+
-+	tag = nand_bbt_get(ra, block);
-+
-+	if (tag == BBT_TAG_UNKNOWN) {
-+		ret = nfc_read_oob(ra, page, ra->badblockpos, (char*)&tag, 1, FLAG_NONE);
-+		if (ret == 0)
-+			tag = ((le32_to_cpu(tag) & 0x0ff) == 0x0ff) ? BBT_TAG_GOOD : BBT_TAG_BAD;
-+		else
-+			tag = BBT_TAG_BAD;
-+
-+		nand_bbt_set(ra, block, tag);
-+	}
-+
-+	if (tag != BBT_TAG_GOOD) {
-+		printk("%s: offs:%x tag: %s \n", __func__, (unsigned int)offs, str[tag]);
-+		return 1;
-+	}
-+	else 
-+		return 0;
-+	
-+}
-+
-+
-+
-+/**
-+ * nand_block_markbad -
-+ */
-+int nand_block_markbad(struct ra_nand_chip *ra, loff_t offs)
-+{
-+	int page, block;
-+	int ret = 4;
-+	unsigned int tag;
-+	char *ecc;
-+
-+	// align with chip
-+	ra_dbg("%s offs: %x \n", __func__, (int)offs);
-+
-+	offs = offs & ((1<<ra->chip_shift) -1);
-+
-+	page = offs >> ra->page_shift;
-+	block = offs >> ra->erase_shift;
-+
-+	tag = nand_bbt_get(ra, block);
-+
-+	if (tag == BBT_TAG_BAD) {
-+		printk("%s: mark repeatedly \n", __func__);
-+		return 0;
-+	}
-+
-+	// new tag as bad
-+	tag =BBT_TAG_BAD;
-+	ret = nfc_read_page(ra, ra->buffers, page, FLAG_NONE);
-+	if (ret != 0) {
-+		printk("%s: fail to read bad block tag \n", __func__);
-+		goto tag_bbt;
-+	}
-+
-+	ecc = &ra->buffers[(1<<ra->page_shift)+ra->badblockpos];
-+	if (*ecc == (char)0x0ff) {
-+		//tag into flash
-+		*ecc = (char)tag;
-+		ret = nfc_write_page(ra, ra->buffers, page, FLAG_USE_GDMA);
-+		if (ret)
-+			printk("%s: fail to write bad block tag \n", __func__);
-+		
-+	}	
-+
-+tag_bbt:
-+	//update bbt
-+	nand_bbt_set(ra, block, tag);
-+
-+	return 0;
-+}
-+
-+
-+#if defined (WORKAROUND_RX_BUF_OV)
-+/**
-+ * to find a bad block for ecc verify of read_page
-+ */
-+unsigned int nand_bbt_find_sandbox(struct ra_nand_chip *ra)
-+{
-+	loff_t offs = 0;
-+	int chipsize = 1 << ra->chip_shift;
-+	int blocksize = 1 << ra->erase_shift;
-+
-+	
-+	while (offs < chipsize) {
-+		if (nand_block_checkbad(ra, offs)) //scan and verify the unknown tag
-+			break;
-+		offs += blocksize;
-+	}
-+
-+	if (offs >= chipsize) {
-+		offs = chipsize - blocksize;
-+	}
-+
-+	nand_bbt_set(ra, (unsigned int)offs>>ra->erase_shift, BBT_TAG_RES);	 // tag bbt only, instead of update badblockpos of flash.
-+	return (offs >> ra->page_shift);
-+}
-+#endif
-+
-+
-+
-+/**
-+ * nand_erase_nand - [Internal] erase block(s)
-+ * @mtd:	MTD device structure
-+ * @instr:	erase instruction
-+ * @allowbbt:	allow erasing the bbt area
-+ *
-+ * Erase one ore more blocks
-+ */
-+int _nand_erase_nand(struct ra_nand_chip *ra, struct erase_info *instr)
-+{
-+	int page, len, status, ret;
-+	unsigned int addr, blocksize = 1<<ra->erase_shift;
-+
-+	ra_dbg("%s: start:%x, len:%x \n", __func__, 
-+	       (unsigned int)instr->addr, (unsigned int)instr->len);
-+
-+//#define BLOCK_ALIGNED(a) ((a) & (blocksize - 1)) // already defined
-+
-+	if (BLOCK_ALIGNED(instr->addr) || BLOCK_ALIGNED(instr->len)) {
-+		ra_dbg("%s: erase block not aligned, addr:%x len:%x\n", __func__, instr->addr, instr->len);
-+		return -EINVAL;
-+	}
-+
-+	instr->fail_addr = 0xffffffff;
-+
-+	len = instr->len;
-+	addr = instr->addr;
-+	instr->state = MTD_ERASING;
-+
-+	while (len) {
-+
-+		page = (int)(addr >> ra->page_shift);
-+
-+		/* select device and check wp */
-+		if (nfc_enable_chip(ra, addr, 0)) {
-+			printk("%s: nand is write protected \n", __func__);
-+			instr->state = MTD_ERASE_FAILED;
-+			goto erase_exit;
-+		}
-+
-+		/* if we have a bad block, we do not erase bad blocks */
-+		if (nand_block_checkbad(ra, addr)) {
-+			printk(KERN_WARNING "nand_erase: attempt to erase a "
-+			       "bad block at 0x%08x\n", addr);
-+			instr->state = MTD_ERASE_FAILED;
-+			goto erase_exit;
-+		}
-+
-+		/*
-+		 * Invalidate the page cache, if we erase the block which
-+		 * contains the current cached page
-+		 */
-+		if (BLOCK_ALIGNED(addr) == BLOCK_ALIGNED(ra->buffers_page << ra->page_shift))
-+			ra->buffers_page = -1;
-+
-+		status = nfc_erase_block(ra, page);
-+		/* See if block erase succeeded */
-+		if (status) {
-+			printk("%s: failed erase, page 0x%08x\n", __func__, page);
-+			instr->state = MTD_ERASE_FAILED;
-+			instr->fail_addr = (page << ra->page_shift);
-+			goto erase_exit;
-+		}
-+
-+
-+		/* Increment page address and decrement length */
-+		len -= blocksize;
-+		addr += blocksize;
-+
-+	}
-+	instr->state = MTD_ERASE_DONE;
-+
-+erase_exit:
-+
-+	ret = ((instr->state == MTD_ERASE_DONE) ? 0 : -EIO);
-+	/* Do call back function */
-+	if (!ret)
-+		mtd_erase_callback(instr);
-+
-+	if (ret) {
-+		nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
-+	}
-+
-+	/* Return more or less happy */
-+	return ret;
-+}
-+
-+static int
-+nand_write_oob_buf(struct ra_nand_chip *ra, uint8_t *buf, uint8_t *oob, size_t size,
-+		   int mode, int ooboffs)
-+{
-+	size_t oobsize = 1<<ra->oob_shift;
-+	struct nand_oobfree *free;
-+	uint32_t woffs = ooboffs;
-+	int retsize = 0;
-+
-+	ra_dbg("%s: size:%x, mode:%x, offs:%x  \n", __func__, size, mode, ooboffs);
-+
-+	switch(mode) {
-+	case MTD_OPS_PLACE_OOB:
-+	case MTD_OPS_RAW:
-+		if (ooboffs > oobsize)
-+			return -1;
-+
-+		size = min(size, oobsize - ooboffs);
-+		memcpy(buf + ooboffs, oob, size);
-+		retsize = size;
-+		break;
-+
-+	case MTD_OPS_AUTO_OOB:
-+		if (ooboffs > ra->oob->oobavail)
-+			return -1;
-+
-+		while (size) {
-+			for(free = ra->oob->oobfree; free->length && size; free++) {
-+				int wlen = free->length - woffs;
-+				int bytes = 0;
-+
-+				/* Write request not from offset 0 ? */
-+				if (wlen <= 0) {
-+					woffs = -wlen;
-+					continue;
-+				}
-+
-+				bytes = min_t(size_t, size, wlen);
-+				memcpy (buf + free->offset + woffs, oob, bytes);
-+				woffs = 0;
-+				oob += bytes;
-+				size -= bytes;
-+				retsize += bytes;
-+			}
-+			buf += oobsize;
-+		}
-+		break;
-+
-+	default:
-+		BUG();
-+	}
-+
-+	return retsize;
-+}
-+
-+static int nand_read_oob_buf(struct ra_nand_chip *ra, uint8_t *oob, size_t size, 
-+			     int mode, int ooboffs) 
-+{
-+	size_t oobsize = 1<<ra->oob_shift;
-+	uint8_t *buf = ra->buffers + (1<<ra->page_shift);
-+	int retsize=0;
-+
-+	ra_dbg("%s: size:%x, mode:%x, offs:%x  \n", __func__, size, mode, ooboffs);
-+
-+	switch(mode) {
-+	case MTD_OPS_PLACE_OOB:
-+	case MTD_OPS_RAW:
-+		if (ooboffs > oobsize)
-+			return -1;
-+
-+		size = min(size, oobsize - ooboffs);
-+		memcpy(oob, buf + ooboffs, size);
-+		return size;
-+
-+	case MTD_OPS_AUTO_OOB: {
-+		struct nand_oobfree *free;
-+		uint32_t woffs = ooboffs;
-+
-+		if (ooboffs > ra->oob->oobavail) 
-+			return -1;
-+		
-+		size = min(size, ra->oob->oobavail - ooboffs);
-+		for(free = ra->oob->oobfree; free->length && size; free++) {
-+			int wlen = free->length - woffs;
-+			int bytes = 0;
-+
-+			/* Write request not from offset 0 ? */
-+			if (wlen <= 0) {
-+				woffs = -wlen;
-+				continue;
-+			}
-+			
-+			bytes = min_t(size_t, size, wlen);
-+			memcpy (oob, buf + free->offset + woffs, bytes);
-+			woffs = 0;
-+			oob += bytes;
-+			size -= bytes;
-+			retsize += bytes;
-+		}
-+		return retsize;
-+	}
-+	default:
-+		BUG();
-+	}
-+	
-+	return -1;
-+}
-+
-+/**
-+ * nand_do_write_ops - [Internal] NAND write with ECC
-+ * @mtd:	MTD device structure
-+ * @to:		offset to write to
-+ * @ops:	oob operations description structure
-+ *
-+ * NAND write with ECC
-+ */
-+static int nand_do_write_ops(struct ra_nand_chip *ra, loff_t to,
-+			     struct mtd_oob_ops *ops)
-+{
-+	int page;
-+	uint32_t datalen = ops->len;
-+	uint32_t ooblen = ops->ooblen;
-+	uint8_t *oob = ops->oobbuf;
-+	uint8_t *data = ops->datbuf;
-+	int pagesize = (1<<ra->page_shift);
-+	int pagemask = (pagesize -1);
-+	int oobsize = 1<<ra->oob_shift;
-+	loff_t addr = to;
-+	//int i = 0; //for ra_dbg only
-+
-+	ra_dbg("%s: to:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x oobmode:%x \n", 
-+	       __func__, (unsigned int)to, data, oob, datalen, ooblen, ops->ooboffs, ops->mode);
-+
-+	ops->retlen = 0;
-+	ops->oobretlen = 0;
-+
-+
-+	/* Invalidate the page cache, when we write to the cached page */
-+	ra->buffers_page = -1;
-+
-+	
-+	if (data ==0)
-+		datalen = 0;
-+	
-+	// oob sequential (burst) write
-+	if (datalen == 0 && ooblen) {
-+		int len = ((ooblen + ops->ooboffs) + (ra->oob->oobavail - 1)) / ra->oob->oobavail * oobsize;
-+
-+		/* select chip, and check if it is write protected */
-+		if (nfc_enable_chip(ra, addr, 0))
-+			return -EIO;
-+
-+		//FIXME, need sanity check of block boundary
-+		page = (int)((to & ((1<<ra->chip_shift)-1)) >> ra->page_shift); //chip boundary
-+		memset(ra->buffers, 0x0ff, pagesize);
-+		//fixme, should we reserve the original content?
-+		if (ops->mode == MTD_OPS_AUTO_OOB) {
-+			nfc_read_oob(ra, page, 0, ra->buffers, len, FLAG_NONE);
-+		}
-+		//prepare buffers
-+		if (ooblen != 8)
-+		{
-+			nand_write_oob_buf(ra, ra->buffers, oob, ooblen, ops->mode, ops->ooboffs);
-+			// write out buffer to chip
-+			nfc_write_oob(ra, page, 0, ra->buffers, len, FLAG_USE_GDMA);
-+		}
-+
-+		ops->oobretlen = ooblen;
-+		ooblen = 0;
-+	}
-+
-+	// data sequential (burst) write
-+	if (datalen && ooblen == 0) {
-+		// ranfc can not support write_data_burst, since hw-ecc and fifo constraints..
-+	}
-+
-+	// page write
-+	while(datalen || ooblen) {
-+		int len;
-+		int ret;
-+		int offs;
-+		int ecc_en = 0;
-+
-+		ra_dbg("%s (%d): addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n", 
-+		       __func__, i++, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
-+
-+		page = (int)((addr & ((1<<ra->chip_shift)-1)) >> ra->page_shift); //chip boundary
-+		
-+		/* select chip, and check if it is write protected */
-+		if (nfc_enable_chip(ra, addr, 0))
-+			return -EIO;
-+
-+		// oob write
-+		if (ops->mode == MTD_OPS_AUTO_OOB) {
-+			//fixme, this path is not yet varified 
-+			nfc_read_oob(ra, page, 0, ra->buffers + pagesize, oobsize, FLAG_NONE);
-+		}
-+		if (oob && ooblen > 0) {
-+			len = nand_write_oob_buf(ra, ra->buffers + pagesize, oob, ooblen, ops->mode, ops->ooboffs);
-+			if (len < 0) 
-+				return -EINVAL;
-+			
-+			oob += len;
-+			ops->oobretlen += len;
-+			ooblen -= len;
-+		}
-+
-+		// data write
-+		offs = addr & pagemask;
-+		len = min_t(size_t, datalen, pagesize - offs);
-+		if (data && len > 0) {
-+			memcpy(ra->buffers + offs, data, len);	// we can not sure ops->buf wether is DMA-able.
-+
-+			data += len;
-+			datalen -= len;
-+			ops->retlen += len;
-+
-+			ecc_en = FLAG_ECC_EN;
-+		}
-+		ret = nfc_write_page(ra, ra->buffers, page, FLAG_USE_GDMA | FLAG_VERIFY |
-+				     ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0 : ecc_en ));
-+		if (ret) {
-+			nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
-+			return ret;
-+		}
-+
-+		nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_GOOD);
-+
-+		addr = (page+1) << ra->page_shift;
-+
-+	}
-+	return 0;
-+}
-+
-+/**
-+ * nand_do_read_ops - [Internal] Read data with ECC
-+ *
-+ * @mtd:	MTD device structure
-+ * @from:	offset to read from
-+ * @ops:	oob ops structure
-+ *
-+ * Internal function. Called with chip held.
-+ */
-+static int nand_do_read_ops(struct ra_nand_chip *ra, loff_t from,
-+			    struct mtd_oob_ops *ops)
-+{
-+	int page;
-+	uint32_t datalen = ops->len;
-+	uint32_t ooblen = ops->ooblen;
-+	uint8_t *oob = ops->oobbuf;
-+	uint8_t *data = ops->datbuf;
-+	int pagesize = (1<<ra->page_shift);
-+	int pagemask = (pagesize -1);
-+	loff_t addr = from;
-+	//int i = 0; //for ra_dbg only
-+
-+	ra_dbg("%s: addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n", 
-+	       __func__, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
-+
-+	ops->retlen = 0;
-+	ops->oobretlen = 0;
-+	if (data == 0)
-+		datalen = 0;
-+
-+
-+	while(datalen || ooblen) {
-+		int len;
-+		int ret;
-+		int offs;
-+
-+		ra_dbg("%s (%d): addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n", 
-+		       __func__, i++, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
-+		/* select chip */
-+		if (nfc_enable_chip(ra, addr, 1) < 0)
-+			return -EIO;
-+
-+		page = (int)((addr & ((1<<ra->chip_shift)-1)) >> ra->page_shift); 
-+
-+		ret = nfc_read_page(ra, ra->buffers, page, FLAG_VERIFY | 
-+				    ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0: FLAG_ECC_EN ));
-+		//FIXME, something strange here, some page needs 2 more tries to guarantee read success.
-+		if (ret) {
-+			printk("read again:\n");
-+			ret = nfc_read_page(ra, ra->buffers, page, FLAG_VERIFY | 
-+					    ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0: FLAG_ECC_EN ));
-+
-+			if (ret) {
-+				printk("read again fail \n");
-+				nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
-+				if ((ret != -EUCLEAN) && (ret != -EBADMSG)) {
-+					return ret;
-+				}
-+				else {
-+					/* ecc verification fail, but data need to be returned. */
-+				}
-+			}
-+			else {
-+				printk(" read agian susccess \n");
-+			}
-+		}
-+
-+		// oob read
-+		if (oob && ooblen > 0) {
-+			len = nand_read_oob_buf(ra, oob, ooblen, ops->mode, ops->ooboffs);
-+			if (len < 0) {
-+				printk("nand_read_oob_buf: fail return %x \n", len);
-+				return -EINVAL;
-+			}
-+
-+			oob += len;
-+			ops->oobretlen += len;
-+			ooblen -= len;
-+		}
-+
-+		// data read
-+		offs = addr & pagemask;
-+		len = min_t(size_t, datalen, pagesize - offs);
-+		if (data && len > 0) {
-+			memcpy(data, ra->buffers + offs, len);	// we can not sure ops->buf wether is DMA-able.
-+
-+			data += len;
-+			datalen -= len;
-+			ops->retlen += len;
-+			if (ret)
-+				return ret;
-+		}
-+
-+
-+		nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_GOOD);
-+		// address go further to next page, instead of increasing of length of write. This avoids some special cases wrong.
-+		addr = (page+1) << ra->page_shift;
-+	}
-+	return 0;
-+}
-+
-+static int
-+ramtd_nand_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+	struct ra_nand_chip *ra = (struct ra_nand_chip *)mtd->priv;
-+	int ret;
-+
-+	ra_dbg("%s: start:%x, len:%x \n", __func__,
-+		(unsigned int)instr->addr, (unsigned int)instr->len);
-+
-+	nand_get_device(ra, FL_ERASING);
-+	ret = _nand_erase_nand((struct ra_nand_chip *)mtd->priv, instr);
-+	nand_release_device(ra);
-+
-+	return ret;
-+}
-+
-+static int
-+ramtd_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
-+		size_t *retlen, const uint8_t *buf)
-+{
-+	struct ra_nand_chip *ra = mtd->priv;
-+	struct mtd_oob_ops ops;
-+	int ret;
-+
-+	ra_dbg("%s: to 0x%x len=0x%x\n", __func__, to, len);
-+
-+	if ((to + len) > mtd->size)
-+		return -EINVAL;
-+
-+	if (!len)
-+		return 0;
-+
-+	nand_get_device(ra, FL_WRITING);
-+
-+	memset(&ops, 0, sizeof(ops));
-+	ops.len = len;
-+	ops.datbuf = (uint8_t *)buf;
-+	ops.oobbuf = NULL;
-+	ops.mode =  MTD_OPS_AUTO_OOB;
-+
-+	ret = nand_do_write_ops(ra, to, &ops);
-+
-+	*retlen = ops.retlen;
-+
-+	nand_release_device(ra);
-+
-+	return ret;
-+}
-+
-+static int
-+ramtd_nand_read(struct mtd_info *mtd, loff_t from, size_t len,
-+		size_t *retlen, uint8_t *buf)
-+{
-+
-+	struct ra_nand_chip *ra = mtd->priv;
-+	int ret;
-+	struct mtd_oob_ops ops;
-+
-+	ra_dbg("%s: mtd:%p from:%x, len:%x, buf:%p \n", __func__, mtd, (unsigned int)from, len, buf);
-+
-+	/* Do not allow reads past end of device */
-+	if ((from + len) > mtd->size)
-+		return -EINVAL;
-+	if (!len)
-+		return 0;
-+
-+	nand_get_device(ra, FL_READING);
-+
-+	memset(&ops, 0, sizeof(ops));
-+	ops.len = len;
-+	ops.datbuf = buf;
-+	ops.oobbuf = NULL;
-+	ops.mode = MTD_OPS_AUTO_OOB;
-+
-+	ret = nand_do_read_ops(ra, from, &ops);
-+
-+	*retlen = ops.retlen;
-+
-+	nand_release_device(ra);
-+
-+	return ret;
-+
-+}
-+
-+static int
-+ramtd_nand_readoob(struct mtd_info *mtd, loff_t from,
-+			struct mtd_oob_ops *ops)
-+{
-+	struct ra_nand_chip *ra = mtd->priv;
-+	int ret;
-+
-+	ra_dbg("%s: \n", __func__);
-+
-+	nand_get_device(ra, FL_READING);
-+
-+	ret = nand_do_read_ops(ra, from, ops);
-+
-+	nand_release_device(ra);
-+
-+	return ret;
-+}
-+
-+static int
-+ramtd_nand_writeoob(struct mtd_info *mtd, loff_t to,
-+			struct mtd_oob_ops *ops)
-+{
-+	struct ra_nand_chip *ra = mtd->priv;
-+	int ret;
-+
-+	nand_get_device(ra, FL_READING);
-+	ret = nand_do_write_ops(ra, to, ops);
-+	nand_release_device(ra);
-+
-+	return ret;
-+}
-+
-+static int
-+ramtd_nand_block_isbad(struct mtd_info *mtd, loff_t offs)
-+{
-+	if (offs > mtd->size)
-+		return -EINVAL;
-+
-+	return nand_block_checkbad((struct ra_nand_chip *)mtd->priv, offs);
-+}
-+
-+static int
-+ramtd_nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+	struct ra_nand_chip *ra = mtd->priv;
-+	int ret;
-+
-+	ra_dbg("%s: \n", __func__);
-+	nand_get_device(ra, FL_WRITING);
-+	ret = nand_block_markbad(ra, ofs);
-+	nand_release_device(ra);
-+
-+	return ret;
-+}
-+
-+// 1-bit error detection
-+static int one_bit_correction(char *ecc1, char *ecc2, int *bytes, int *bits)
-+{
-+	// check if ecc and expected are all valid
-+	char *p, nibble, crumb;
-+	int i, xor, iecc1 = 0, iecc2 = 0;
-+
-+	printk("correction : %x %x %x\n", ecc1[0], ecc1[1], ecc1[2]);
-+	printk("correction : %x %x %x\n", ecc2[0], ecc2[1], ecc2[2]);
-+
-+	p = (char *)ecc1;
-+	for (i = 0; i < CONFIG_ECC_BYTES; i++)
-+	{
-+		nibble = *(p+i) & 0xf;
-+		if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+			(nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+			return -1;
-+		nibble = ((*(p+i)) >> 4) & 0xf;
-+		if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+			(nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+			return -1;
-+	}
-+
-+	p = (char *)ecc2;
-+	for (i = 0; i < CONFIG_ECC_BYTES; i++)
-+	{
-+		nibble = *(p+i) & 0xf;
-+		if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+			(nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+			return -1;
-+		nibble = ((*(p+i)) >> 4) & 0xf;
-+		if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+			(nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+			return -1;
-+	}
-+
-+	memcpy(&iecc1, ecc1, 3);
-+	memcpy(&iecc2, ecc2, 3);
-+
-+	xor = iecc1 ^ iecc2;
-+	printk("xor = %x (%x %x)\n", xor, iecc1, iecc2);
-+
-+	*bytes = 0;
-+	for (i = 0; i < 9; i++)
-+	{
-+		crumb = (xor >> (2*i)) & 0x3;
-+		if ((crumb == 0x0) || (crumb == 0x3))
-+			return -1;
-+		if (crumb == 0x2)
-+			*bytes += (1 << i);
-+	}
-+
-+	*bits = 0;
-+	for (i = 0; i < 3; i++)
-+	{
-+		crumb = (xor >> (18 + 2*i)) & 0x3;
-+		if ((crumb == 0x0) || (crumb == 0x3))
-+			return -1;
-+		if (crumb == 0x2)
-+			*bits += (1 << i);
-+	}
-+
-+	return 0;
-+}
-+
-+
-+
-+/************************************************************
-+ * the init/exit section.
-+ */
-+
-+static struct nand_ecclayout ra_oob_layout = {
-+	.eccbytes = CONFIG_ECC_BYTES,
-+	.eccpos = {5, 6, 7},
-+	.oobfree = {
-+		 {.offset = 0, .length = 4},
-+		 {.offset = 8, .length = 8},
-+		 {.offset = 0, .length = 0}
-+	 },
-+#define RA_CHIP_OOB_AVAIL (4+8)
-+	.oobavail = RA_CHIP_OOB_AVAIL,
-+	// 5th byte is bad-block flag.
-+};
-+
-+static int
-+mtk_nand_probe(struct platform_device *pdev)
-+{
-+        struct mtd_part_parser_data ppdata;
-+	struct ra_nand_chip *ra;
-+	int alloc_size, bbt_size, buffers_size, reg, err;
-+	unsigned char chip_mode = 12;
-+
-+/*	if(ra_check_flash_type()!=BOOT_FROM_NAND) {
-+		return 0;
-+	}*/
-+
-+	//FIXME: config 512 or 2048-byte page according to HWCONF
-+#if defined (CONFIG_RALINK_RT6855A)
-+	reg = ra_inl(RALINK_SYSCTL_BASE+0x8c);
-+	chip_mode = ((reg>>28) & 0x3)|(((reg>>22) & 0x3)<<2);
-+	if (chip_mode == 1) {
-+		printk("! nand 2048\n");
-+		ra_or(NFC_CONF1, 1);
-+		is_nand_page_2048 = 1;
-+		nand_addrlen = 5;
-+	}
-+	else {
-+		printk("! nand 512\n");
-+		ra_and(NFC_CONF1, ~1);
-+		is_nand_page_2048 = 0;
-+		nand_addrlen = 4;
-+	}	
-+#elif (defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_RT6855))
-+	ra_outl(RALINK_SYSCTL_BASE+0x60, ra_inl(RALINK_SYSCTL_BASE+0x60) & ~(0x3<<18));
-+	reg = ra_inl(RALINK_SYSCTL_BASE+0x10);
-+	chip_mode = (reg & 0x0F);
-+	if((chip_mode==1)||(chip_mode==11)) {
-+		ra_or(NFC_CONF1, 1);
-+		is_nand_page_2048 = 1;
-+		nand_addrlen = ((chip_mode!=11) ? 4 : 5);
-+		printk("!!! nand page size = 2048, addr len=%d\n", nand_addrlen);
-+	}
-+	else {
-+		ra_and(NFC_CONF1, ~1);
-+		is_nand_page_2048 = 0;
-+		nand_addrlen = ((chip_mode!=10) ? 3 : 4);
-+		printk("!!! nand page size = 512, addr len=%d\n", nand_addrlen);
-+	}			
-+#else
-+	is_nand_page_2048 = 0;
-+	nand_addrlen = 3;
-+	printk("!!! nand page size = 512, addr len=%d\n", nand_addrlen);
-+#endif			
-+
-+#if defined (CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_RT6855) 
-+	//config ECC location
-+    ra_and(NFC_CONF1, 0xfff000ff);
-+	ra_or(NFC_CONF1, ((CONFIG_ECC_OFFSET + 2) << 16) +
-+						((CONFIG_ECC_OFFSET + 1) << 12) +
-+						(CONFIG_ECC_OFFSET << 8));
-+#endif
-+
-+#define ALIGNE_16(a) (((unsigned long)(a)+15) & ~15)
-+	buffers_size = ALIGNE_16((1<<CONFIG_PAGE_SIZE_BIT) + (1<<CONFIG_OOBSIZE_PER_PAGE_BIT)); //ra->buffers
-+	bbt_size = BBTTAG_BITS * (1<<(CONFIG_CHIP_SIZE_BIT - (CONFIG_PAGE_SIZE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT))) / 8; //ra->bbt
-+	bbt_size = ALIGNE_16(bbt_size);
-+
-+	alloc_size = buffers_size + bbt_size;
-+	alloc_size += buffers_size; //for ra->readback_buffers
-+	alloc_size += sizeof(*ra); 
-+	alloc_size += sizeof(*ranfc_mtd);
-+
-+	//make sure gpio-0 is input
-+	ra_outl(RALINK_PIO_BASE+0x24, ra_inl(RALINK_PIO_BASE+0x24) & ~0x01);
-+
-+	ra = (struct ra_nand_chip *)kzalloc(alloc_size, GFP_KERNEL | GFP_DMA);
-+	if (!ra) {
-+		printk("%s: mem alloc fail \n", __func__);
-+		return -ENOMEM;
-+	}
-+	memset(ra, 0, alloc_size);
-+
-+	//dynamic
-+	ra->buffers = (char *)((char *)ra + sizeof(*ra));
-+	ra->readback_buffers = ra->buffers + buffers_size; 
-+	ra->bbt = ra->readback_buffers + buffers_size; 
-+	ranfc_mtd = (struct mtd_info *)(ra->bbt + bbt_size);
-+
-+	//static 
-+	ra->numchips		= CONFIG_NUMCHIPS;
-+	ra->chip_shift		= CONFIG_CHIP_SIZE_BIT;
-+	ra->page_shift		= CONFIG_PAGE_SIZE_BIT;
-+	ra->oob_shift		= CONFIG_OOBSIZE_PER_PAGE_BIT;
-+	ra->erase_shift		= (CONFIG_PAGE_SIZE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT);
-+	ra->badblockpos		= CONFIG_BAD_BLOCK_POS;
-+	ra_oob_layout.eccpos[0] = CONFIG_ECC_OFFSET;
-+	ra_oob_layout.eccpos[1] = CONFIG_ECC_OFFSET + 1;
-+	ra_oob_layout.eccpos[2] = CONFIG_ECC_OFFSET + 2;
-+	ra->oob			= &ra_oob_layout;
-+	ra->buffers_page	= -1;
-+
-+#if defined (WORKAROUND_RX_BUF_OV)
-+	if (ranfc_verify) {
-+		ra->sandbox_page = nand_bbt_find_sandbox(ra);
-+	}
-+#endif
-+	ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x01); //set wp to high
-+	nfc_all_reset();
-+
-+	ranfc_mtd->type		= MTD_NANDFLASH;
-+	ranfc_mtd->flags	= MTD_CAP_NANDFLASH;
-+	ranfc_mtd->size		= CONFIG_NUMCHIPS * CFG_CHIPSIZE;
-+	ranfc_mtd->erasesize	= CFG_BLOCKSIZE;
-+	ranfc_mtd->writesize	= CFG_PAGESIZE;
-+	ranfc_mtd->oobsize 	= CFG_PAGE_OOBSIZE;
-+	ranfc_mtd->oobavail	= RA_CHIP_OOB_AVAIL;
-+	ranfc_mtd->name		= "ra_nfc";
-+	//ranfc_mtd->index
-+	ranfc_mtd->ecclayout	= &ra_oob_layout;
-+	//ranfc_mtd->numberaseregions
-+	//ranfc_mtd->eraseregions
-+	//ranfc_mtd->bansize
-+	ranfc_mtd->_erase 	= ramtd_nand_erase;
-+	//ranfc_mtd->point
-+	//ranfc_mtd->unpoint
-+	ranfc_mtd->_read		= ramtd_nand_read;
-+	ranfc_mtd->_write	= ramtd_nand_write;
-+	ranfc_mtd->_read_oob	= ramtd_nand_readoob;
-+	ranfc_mtd->_write_oob	= ramtd_nand_writeoob;
-+	//ranfc_mtd->get_fact_prot_info; ranfc_mtd->read_fact_prot_reg; 
-+	//ranfc_mtd->get_user_prot_info; ranfc_mtd->read_user_prot_reg;
-+	//ranfc_mtd->write_user_prot_reg; ranfc_mtd->lock_user_prot_reg;
-+	//ranfc_mtd->writev; ranfc_mtd->sync; ranfc_mtd->lock; ranfc_mtd->unlock; ranfc_mtd->suspend; ranfc_mtd->resume;
-+	ranfc_mtd->_block_isbad		= ramtd_nand_block_isbad;
-+	ranfc_mtd->_block_markbad	= ramtd_nand_block_markbad;
-+	//ranfc_mtd->reboot_notifier
-+	//ranfc_mtd->ecc_stats;
-+	// subpage_sht;
-+
-+	//ranfc_mtd->get_device; ranfc_mtd->put_device
-+	ranfc_mtd->priv = ra;
-+
-+	ranfc_mtd->owner = THIS_MODULE;
-+	ra->controller = &ra->hwcontrol;
-+	mutex_init(ra->controller);
-+
-+	printk("%s: alloc %x, at %p , btt(%p, %x), ranfc_mtd:%p\n", 
-+	       __func__ , alloc_size, ra, ra->bbt, bbt_size, ranfc_mtd);
-+
-+	ppdata.of_node = pdev->dev.of_node;
-+	err = mtd_device_parse_register(ranfc_mtd, mtk_probe_types,
-+			&ppdata, NULL, 0);
-+
-+	return err;
-+}
-+
-+static int
-+mtk_nand_remove(struct platform_device *pdev)
-+{
-+	struct ra_nand_chip *ra;
-+
-+	if (ranfc_mtd) {
-+		ra = (struct ra_nand_chip  *)ranfc_mtd->priv;
-+
-+		/* Deregister partitions */
-+		//del_mtd_partitions(ranfc_mtd);
-+		kfree(ra);
-+	}
-+	return 0;
-+}
-+
-+static const struct of_device_id mtk_nand_match[] = {
-+	{ .compatible = "mtk,mt7620-nand" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, mtk_nand_match);
-+
-+static struct platform_driver mtk_nand_driver = {
-+	.probe = mtk_nand_probe,
-+	.remove = mtk_nand_remove,
-+	.driver = {
-+		.name = "mt7620_nand",
-+		.owner = THIS_MODULE,
-+		.of_match_table = mtk_nand_match,
-+	},
-+};
-+
-+module_platform_driver(mtk_nand_driver);
-+
-+
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mtd/maps/ralink_nand.h
-@@ -0,0 +1,232 @@
-+#ifndef RT2880_NAND_H
-+#define RT2880_NAND_H
-+
-+#include <linux/mtd/mtd.h>
-+
-+//#include "gdma.h"
-+
-+#define RALINK_SYSCTL_BASE		0xB0000000
-+#define RALINK_PIO_BASE			0xB0000600
-+#define RALINK_NAND_CTRL_BASE		0xB0000810
-+#define CONFIG_RALINK_MT7620
-+
-+#define SKIP_BAD_BLOCK
-+//#define RANDOM_GEN_BAD_BLOCK
-+
-+#define ra_inl(addr)  (*(volatile unsigned int *)(addr))
-+#define ra_outl(addr, value)  (*(volatile unsigned int *)(addr) = (value))
-+#define ra_aor(addr, a_mask, o_value)  ra_outl(addr, (ra_inl(addr) & (a_mask)) | (o_value))
-+#define ra_and(addr, a_mask)  ra_aor(addr, a_mask, 0)
-+#define ra_or(addr, o_value)  ra_aor(addr, -1, o_value)
-+
-+
-+#define CONFIG_NUMCHIPS 1
-+#define CONFIG_NOT_SUPPORT_WP //rt3052 has no WP signal for chip.
-+//#define CONFIG_NOT_SUPPORT_RB
-+
-+extern int is_nand_page_2048;
-+extern const unsigned int nand_size_map[2][3];
-+
-+//chip
-+// chip geometry: SAMSUNG small size 32MB.
-+#define CONFIG_CHIP_SIZE_BIT (nand_size_map[is_nand_page_2048][nand_addrlen-3]) //! (1<<NAND_SIZE_BYTE) MB
-+//#define CONFIG_CHIP_SIZE_BIT (is_nand_page_2048? 29 : 25)	//! (1<<NAND_SIZE_BYTE) MB
-+#define CONFIG_PAGE_SIZE_BIT (is_nand_page_2048? 11 : 9)	//! (1<<PAGE_SIZE) MB
-+//#define CONFIG_SUBPAGE_BIT 1		//! these bits will be compensate by command cycle
-+#define CONFIG_NUMPAGE_PER_BLOCK_BIT (is_nand_page_2048? 6 : 5)	//! order of number of pages a block. 
-+#define CONFIG_OOBSIZE_PER_PAGE_BIT (is_nand_page_2048? 6 : 4)	//! byte number of oob a page.
-+#define CONFIG_BAD_BLOCK_POS (is_nand_page_2048? 0 : 4)     //! offset of byte to denote bad block.
-+#define CONFIG_ECC_BYTES 3      //! ecc has 3 bytes
-+#define CONFIG_ECC_OFFSET (is_nand_page_2048? 6 : 5)        //! ecc starts from offset 5.
-+
-+//this section should not be modified.
-+//#define CFG_COLUMN_ADDR_MASK ((1 << (CONFIG_PAGE_SIZE_BIT - CONFIG_SUBPAGE_BIT)) - 1)
-+//#define CFG_COLUMN_ADDR_CYCLE (((CONFIG_PAGE_SIZE_BIT - CONFIG_SUBPAGE_BIT) + 7)/8) 
-+//#define CFG_ROW_ADDR_CYCLE ((CONFIG_CHIP_SIZE_BIT - CONFIG_PAGE_SIZE_BIT + 7)/8) 
-+//#define CFG_ADDR_CYCLE (CFG_COLUMN_ADDR_CYCLE + CFG_ROW_ADDR_CYCLE)
-+
-+#define CFG_COLUMN_ADDR_CYCLE   (is_nand_page_2048? 2 : 1)
-+#define CFG_ROW_ADDR_CYCLE      (nand_addrlen - CFG_COLUMN_ADDR_CYCLE)
-+#define CFG_ADDR_CYCLE (CFG_COLUMN_ADDR_CYCLE + CFG_ROW_ADDR_CYCLE)
-+
-+#define CFG_CHIPSIZE    (1 << ((CONFIG_CHIP_SIZE_BIT>=32)? 31 : CONFIG_CHIP_SIZE_BIT))
-+//#define CFG_CHIPSIZE  	(1 << CONFIG_CHIP_SIZE_BIT)
-+#define CFG_PAGESIZE	(1 << CONFIG_PAGE_SIZE_BIT)
-+#define CFG_BLOCKSIZE 	(CFG_PAGESIZE << CONFIG_NUMPAGE_PER_BLOCK_BIT)
-+#define CFG_NUMPAGE	(1 << (CONFIG_CHIP_SIZE_BIT - CONFIG_PAGE_SIZE_BIT))
-+#define CFG_NUMBLOCK	(CFG_NUMPAGE >> CONFIG_NUMPAGE_PER_BLOCK_BIT)
-+#define CFG_BLOCK_OOBSIZE	(1 << (CONFIG_OOBSIZE_PER_PAGE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT))	
-+#define CFG_PAGE_OOBSIZE	(1 << CONFIG_OOBSIZE_PER_PAGE_BIT)	
-+
-+#define NAND_BLOCK_ALIGN(addr) ((addr) & (CFG_BLOCKSIZE-1))
-+#define NAND_PAGE_ALIGN(addr) ((addr) & (CFG_PAGESIZE-1))
-+
-+
-+#define NFC_BASE 	RALINK_NAND_CTRL_BASE
-+#define NFC_CTRL	(NFC_BASE + 0x0)
-+#define NFC_CONF	(NFC_BASE + 0x4)
-+#define NFC_CMD1	(NFC_BASE + 0x8)
-+#define NFC_CMD2	(NFC_BASE + 0xc)
-+#define NFC_CMD3	(NFC_BASE + 0x10)
-+#define NFC_ADDR	(NFC_BASE + 0x14)
-+#define NFC_DATA	(NFC_BASE + 0x18)
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+	defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+#define NFC_ECC		(NFC_BASE + 0x30)
-+#else
-+#define NFC_ECC		(NFC_BASE + 0x1c)
-+#endif
-+#define NFC_STATUS	(NFC_BASE + 0x20)
-+#define NFC_INT_EN	(NFC_BASE + 0x24)
-+#define NFC_INT_ST	(NFC_BASE + 0x28)
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+	defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+#define NFC_CONF1	(NFC_BASE + 0x2c)
-+#define NFC_ECC_P1	(NFC_BASE + 0x30)
-+#define NFC_ECC_P2	(NFC_BASE + 0x34)
-+#define NFC_ECC_P3	(NFC_BASE + 0x38)
-+#define NFC_ECC_P4	(NFC_BASE + 0x3c)
-+#define NFC_ECC_ERR1	(NFC_BASE + 0x40)
-+#define NFC_ECC_ERR2	(NFC_BASE + 0x44)
-+#define NFC_ECC_ERR3	(NFC_BASE + 0x48)
-+#define NFC_ECC_ERR4	(NFC_BASE + 0x4c)
-+#define NFC_ADDR2	(NFC_BASE + 0x50)
-+#endif
-+
-+enum _int_stat {
-+	INT_ST_ND_DONE 	= 1<<0,
-+	INT_ST_TX_BUF_RDY       = 1<<1,
-+	INT_ST_RX_BUF_RDY	= 1<<2,
-+	INT_ST_ECC_ERR		= 1<<3,
-+	INT_ST_TX_TRAS_ERR	= 1<<4,
-+	INT_ST_RX_TRAS_ERR	= 1<<5,
-+	INT_ST_TX_KICK_ERR	= 1<<6,
-+	INT_ST_RX_KICK_ERR      = 1<<7
-+};
-+
-+
-+//#define WORKAROUND_RX_BUF_OV 1
-+
-+
-+/*************************************************************
-+ * stolen from nand.h
-+ *************************************************************/
-+
-+/*
-+ * Standard NAND flash commands
-+ */
-+#define NAND_CMD_READ0		0
-+#define NAND_CMD_READ1		1
-+#define NAND_CMD_RNDOUT		5
-+#define NAND_CMD_PAGEPROG	0x10
-+#define NAND_CMD_READOOB	0x50
-+#define NAND_CMD_ERASE1		0x60
-+#define NAND_CMD_STATUS		0x70
-+#define NAND_CMD_STATUS_MULTI	0x71
-+#define NAND_CMD_SEQIN		0x80
-+#define NAND_CMD_RNDIN		0x85
-+#define NAND_CMD_READID		0x90
-+#define NAND_CMD_ERASE2		0xd0
-+#define NAND_CMD_RESET		0xff
-+
-+/* Extended commands for large page devices */
-+#define NAND_CMD_READSTART	0x30
-+#define NAND_CMD_RNDOUTSTART	0xE0
-+#define NAND_CMD_CACHEDPROG	0x15
-+
-+/* Extended commands for AG-AND device */
-+/*
-+ * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but
-+ *       there is no way to distinguish that from NAND_CMD_READ0
-+ *       until the remaining sequence of commands has been completed
-+ *       so add a high order bit and mask it off in the command.
-+ */
-+#define NAND_CMD_DEPLETE1	0x100
-+#define NAND_CMD_DEPLETE2	0x38
-+#define NAND_CMD_STATUS_MULTI	0x71
-+#define NAND_CMD_STATUS_ERROR	0x72
-+/* multi-bank error status (banks 0-3) */
-+#define NAND_CMD_STATUS_ERROR0	0x73
-+#define NAND_CMD_STATUS_ERROR1	0x74
-+#define NAND_CMD_STATUS_ERROR2	0x75
-+#define NAND_CMD_STATUS_ERROR3	0x76
-+#define NAND_CMD_STATUS_RESET	0x7f
-+#define NAND_CMD_STATUS_CLEAR	0xff
-+
-+#define NAND_CMD_NONE		-1
-+
-+/* Status bits */
-+#define NAND_STATUS_FAIL	0x01
-+#define NAND_STATUS_FAIL_N1	0x02
-+#define NAND_STATUS_TRUE_READY	0x20
-+#define NAND_STATUS_READY	0x40
-+#define NAND_STATUS_WP		0x80
-+
-+typedef enum {
-+	FL_READY,
-+	FL_READING,
-+	FL_WRITING,
-+	FL_ERASING,
-+	FL_SYNCING,
-+	FL_CACHEDPRG,
-+	FL_PM_SUSPENDED,
-+} nand_state_t;
-+
-+/*************************************************************/
-+
-+
-+
-+typedef enum _ra_flags {
-+	FLAG_NONE	= 0,
-+	FLAG_ECC_EN 	= (1<<0),
-+	FLAG_USE_GDMA 	= (1<<1),
-+	FLAG_VERIFY 	= (1<<2),
-+} RA_FLAGS;
-+
-+
-+#define BBTTAG_BITS		2
-+#define BBTTAG_BITS_MASK	((1<<BBTTAG_BITS) -1)
-+enum BBT_TAG {
-+	BBT_TAG_UNKNOWN = 0, //2'b01
-+	BBT_TAG_GOOD	= 3, //2'b11
-+	BBT_TAG_BAD	= 2, //2'b10
-+	BBT_TAG_RES	= 1, //2'b01
-+};
-+
-+struct ra_nand_chip {
-+	int	numchips;
-+	int 	chip_shift;
-+	int	page_shift;
-+	int 	erase_shift;
-+	int 	oob_shift;
-+	int	badblockpos;
-+#if !defined (__UBOOT__)
-+	struct mutex hwcontrol;
-+	struct mutex *controller;
-+#endif
-+	struct nand_ecclayout	*oob;
-+	int 	state;
-+	unsigned int 	buffers_page;
-+	char	*buffers; //[CFG_PAGESIZE + CFG_PAGE_OOBSIZE];
-+	char 	*readback_buffers;
-+	unsigned char 	*bbt;
-+#if defined (WORKAROUND_RX_BUF_OV)
-+	unsigned int	 sandbox_page;	// steal a page (block) for read ECC verification
-+#endif
-+
-+};
-+
-+
-+
-+//fixme, gdma api 
-+int nand_dma_sync(void);
-+void release_dma_buf(void);
-+int set_gdma_ch(unsigned long dst, 
-+		unsigned long src, unsigned int len, int burst_size,
-+		int soft_mode, int src_req_type, int dst_req_type,
-+		int src_burst_mode, int dst_burst_mode);
-+
-+
-+
-+
-+#endif