aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/patches-2.6.39
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2012-02-13 15:17:59 +0000
committerGabor Juhos <juhosg@openwrt.org>2012-02-13 15:17:59 +0000
commite532fa5fd42501e468051addfac454ab70128b04 (patch)
tree4ee21b4ab08ac16ca698ea7b263143a3ad4a4f46 /target/linux/ramips/patches-2.6.39
parent3bfbc69bc20091d4b9ae0cd065388b1fdab4978f (diff)
downloadupstream-e532fa5fd42501e468051addfac454ab70128b04.tar.gz
upstream-e532fa5fd42501e468051addfac454ab70128b04.tar.bz2
upstream-e532fa5fd42501e468051addfac454ab70128b04.zip
ramips: add preliminary support for the RT3662/RT3883 SoCs
SVN-Revision: 30495
Diffstat (limited to 'target/linux/ramips/patches-2.6.39')
-rw-r--r--target/linux/ramips/patches-2.6.39/002-fix-occassional-kernel-hangs.patch104
-rw-r--r--target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch4
-rw-r--r--target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch2
-rw-r--r--target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch32
-rw-r--r--target/linux/ramips/patches-2.6.39/201-rt3883-ohci-glue.patch31
5 files changed, 170 insertions, 3 deletions
diff --git a/target/linux/ramips/patches-2.6.39/002-fix-occassional-kernel-hangs.patch b/target/linux/ramips/patches-2.6.39/002-fix-occassional-kernel-hangs.patch
new file mode 100644
index 0000000000..8150ee4810
--- /dev/null
+++ b/target/linux/ramips/patches-2.6.39/002-fix-occassional-kernel-hangs.patch
@@ -0,0 +1,104 @@
+From patchwork Tue Nov 8 14:59:01 2011
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: MIPS: Kernel hangs occasionally during boot.
+Date: Tue, 08 Nov 2011 13:59:01 -0000
+From: Al Cooper <alcooperx@gmail.com>
+X-Patchwork-Id: 2911
+Message-Id: <1320764341-4275-1-git-send-email-alcooperx@gmail.com>
+To: ralf@linux-mips.org, linux-mips@linux-mips.org,
+ linux-kernel@vger.kernel.org
+Cc: "Al Cooper" <alcooperx@gmail.com>
+
+The Kernel hangs occasionally during boot after
+"Calibrating delay loop..". This is caused by the
+c0_compare_int_usable() routine in cevt-r4k.c returning false which
+causes the system to disable the timer and hang later. The false
+return happens because the routine is using a series of four calls to
+irq_disable_hazard() as a delay while it waits for the timer changes
+to propagate to the cp0 cause register. On newer MIPS cores, like the 74K,
+the series of irq_disable_hazard() calls turn into ehb instructions and
+can take as little as a few clock ticks for all 4 instructions. This
+is not enough of a delay, so the routine thinks the timer is not working.
+This fix uses up to a max number of cycle counter ticks for the delay
+and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to
+handle the hazard condition between cp0 writes and cp0 reads.
+
+Signed-off-by: Al Cooper <alcooperx@gmail.com>
+
+---
+arch/mips/kernel/cevt-r4k.c | 38 +++++++++++++++++++-------------------
+ 1 files changed, 19 insertions(+), 19 deletions(-)
+
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -103,19 +103,10 @@ static int c0_compare_int_pending(void)
+
+ /*
+ * Compare interrupt can be routed and latched outside the core,
+- * so a single execution hazard barrier may not be enough to give
+- * it time to clear as seen in the Cause register. 4 time the
+- * pipeline depth seems reasonably conservative, and empirically
+- * works better in configurations with high CPU/bus clock ratios.
++ * so wait up to worst case number of cycle counter ticks for timer interrupt
++ * changes to propagate to the cause register.
+ */
+-
+-#define compare_change_hazard() \
+- do { \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- } while (0)
++#define COMPARE_INT_SEEN_TICKS 50
+
+ int c0_compare_int_usable(void)
+ {
+@@ -126,8 +117,12 @@ int c0_compare_int_usable(void)
+ * IP7 already pending? Try to clear it by acking the timer.
+ */
+ if (c0_compare_int_pending()) {
+- write_c0_compare(read_c0_count());
+- compare_change_hazard();
++ cnt = read_c0_count();
++ write_c0_compare(cnt);
++ back_to_back_c0_hazard();
++ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
++ if (!c0_compare_int_pending())
++ break;
+ if (c0_compare_int_pending())
+ return 0;
+ }
+@@ -136,7 +131,7 @@ int c0_compare_int_usable(void)
+ cnt = read_c0_count();
+ cnt += delta;
+ write_c0_compare(cnt);
+- compare_change_hazard();
++ back_to_back_c0_hazard();
+ if ((int)(read_c0_count() - cnt) < 0)
+ break;
+ /* increase delta if the timer was already expired */
+@@ -145,12 +140,17 @@ int c0_compare_int_usable(void)
+ while ((int)(read_c0_count() - cnt) <= 0)
+ ; /* Wait for expiry */
+
+- compare_change_hazard();
++ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
++ if (c0_compare_int_pending())
++ break;
+ if (!c0_compare_int_pending())
+ return 0;
+-
+- write_c0_compare(read_c0_count());
+- compare_change_hazard();
++ cnt = read_c0_count();
++ write_c0_compare(cnt);
++ back_to_back_c0_hazard();
++ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
++ if (!c0_compare_int_pending())
++ break;
+ if (c0_compare_int_pending())
+ return 0;
+
diff --git a/target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch
index 59cc032938..07fa6632e7 100644
--- a/target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch
+++ b/target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch
@@ -68,8 +68,8 @@
cards. If unsure, say N.
+config SERIAL_8250_RT288X
-+ bool "Ralink RT288x/RT305x serial port support"
-+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
++ bool "Ralink RT288x/RT305x/RT3883 serial port support"
++ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
+ help
+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
+ serial port, say Y to this option. The driver can handle up to 2 serial
diff --git a/target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch b/target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch
index a32abb9e19..854fe0a8a5 100644
--- a/target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch
+++ b/target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch
@@ -6,7 +6,7 @@
+config RAMIPS_WDT
+ tristate "Ralink RT288X/RT305X Watchdog Timer"
-+ depends on SOC_RT288X || SOC_RT305X
++ depends on SOC_RT288X || SOC_RT305X || SOC_RT3883
+ help
+ Hardware driver for the built-in watchdog timer on the
+ Ralink RT288X/RT305X SoCs.
diff --git a/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch b/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch
new file mode 100644
index 0000000000..d01bd4702c
--- /dev/null
+++ b/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch
@@ -0,0 +1,32 @@
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -202,6 +202,15 @@ config USB_CNS3XXX_EHCI
+ It is needed for high-speed (480Mbit/sec) USB 2.0 device
+ support.
+
++config USB_EHCI_RT3883
++ bool "EHCI support for Ralink RT3662/RT3883 SoCs"
++ depends on USB_EHCI_HCD && SOC_RT3883
++ select USB_EHCI_ROOT_HUB_TT
++ default y
++ ---help---
++ Enables support for the built-in EHCI controller present
++ on the Ralink RT3883 SoC.
++
+ config USB_OXU210HP_HCD
+ tristate "OXU210HP HCD support"
+ depends on USB
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1267,6 +1267,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER tegra_ehci_driver
+ #endif
+
++#ifdef CONFIG_USB_EHCI_RT3883
++#include "ehci-rt3883.c"
++#define PLATFORM_DRIVER ehci_rt3883_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+ !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/target/linux/ramips/patches-2.6.39/201-rt3883-ohci-glue.patch b/target/linux/ramips/patches-2.6.39/201-rt3883-ohci-glue.patch
new file mode 100644
index 0000000000..1415245364
--- /dev/null
+++ b/target/linux/ramips/patches-2.6.39/201-rt3883-ohci-glue.patch
@@ -0,0 +1,31 @@
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -296,6 +296,14 @@ config USB_OHCI_HCD_OMAP3
+ Enables support for the on-chip OHCI controller on
+ OMAP3 and later chips.
+
++config USB_OHCI_RT3883
++ bool "USB OHCI support for the Ralink RT3883 SoCs"
++ depends on USB_OHCI_HCD && SOC_RT3883
++ default y
++ help
++ Enables support for the built-in OHCI controller present on the
++ Ralink RT3883 SoC.
++
+ config USB_OHCI_HCD_PPC_SOC
+ bool "OHCI support for on-chip PPC USB controller"
+ depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1107,6 +1107,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver
+ #endif
+
++#ifdef CONFIG_USB_OHCI_RT3883
++#include "ohci-rt3883.c"
++#define PLATFORM_DRIVER ohci_rt3883_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && \
+ !defined(PLATFORM_DRIVER) && \
+ !defined(OMAP1_PLATFORM_DRIVER) && \